Gaming problem with Cool n quiet ?

Hi there,
I've enabled cool'n'quiet in the Bios, because my fan was doing too much noises.
So now in CPU-Z, the multiplier is x5. But the problem is that is STAY at x5 even when i'm playing game like DOOM3 or Half-Life 2.
So it is lagging a lot in the game, but it doesn't crash (thank god).
I wonder why my fan don't ajust itself, because it should right? CPU go 100% but the multiplier and the fan speed stay don't move.
Thanks,
TanGU.

Quote from: blazing storm on 01-April-05, 06:48:40
Try enabling cool n'quiet in the bios. I had the same experience when I first built my pc a while ago.
Uh... thanks but, like i said:
Quote
Hi there,
I've enabled cool'n'quiet in the Bios, because my fan was doing too much noises.

Similar Messages

Problems with Cool N Quiet and MSI Live Update

Hi
I have had my K8T NEO FISR2 motherboard for a year and generally I have been very happy with it. However, I have just installed Full Spectrum Warrior (about 3 weeks ago ) and Nortons Internet Suite 2005 and both installations resulted in the same error message when I boot up.
The error message is that MSI Live Update isn't started up, and also that Cool N quite is not supported on my motherboard which is obviously rubbish.
I have done a complete re-install of the Live Update and Cool N quite and that fixes it, and then it seems to come back a day later.
Has anyone else experienced this problem?
Thankyou for your help

I stopped using the MSI software completely. Also got lots of troubles with it. MSi Live Update for example stops the audio drivers working while checking their revision and so on, so my advice is to use it only if needed once in a while and not loading it together with Windows.

K8N Neo FSR, possible BIOS bug: setting Vcore with Cool'n Quiet enabled broken?

Athlon 64 3400+, socket 754
K8N Neo FSR, Pheonix-Award BIOS V1,5
WinXP SP2
Having Cool'n Quiet disabled in BIOS setup, CPU core voltage adjustment
using 'Adjust CPU VID' below the Athlon 64 default 1,5V core voltage
works like a charm. Fine!
But with Cool'n Quiet enabled in BIOS setup (and WinXP), under load the
CPU core voltage raises to 1,5V in any case, independently of what I did
define in BIOS setup with 'Adjust CPU VID' (e.g. 1,4V). Software tools setting
Vcore like Core Center are not running.
So I can choose to either run a silent system in idle mode with Cool'n Quiet
enabled or under heavy CPU load with Cool'n Quiet disabled but Vcore
reduced :-( Am I missing something or does it rather look like a BIOS
bug?
Greetings, Falo

Quote from: Tiresmoke on 21-March-05, 00:19:19
As undervolting is not considured standard operating proceedures then how can it be considured a bug.
nor is overclocking but MSI mobo manual reads 'This motherboard is designed to support overclocking.'
So this mobo is designed for supporting at least one non standard operating procedure
Seriously, if BIOS offers a feature I suppose it to work as expected.
regards, Falo

Sblive not working with Cool n'Quiet, how about Audigy

My SBli've will not work with Cool n'Quiet enabled. I tried moving it from slot to slot, I fumbled with the Bios (and every change made matters worse), memory is ok (at least according to memtest and prime95), kx drivers won't help either (but sound a lot nicer).
Well, what gives, the card is a little over seven years old and has earned a retirement.
I'm thinking about replacing it with an Audigy 4 (not pro) und would be very happy if someone could write about her or his experience with the card, esp. with Cool n'Quiet enabled.
Btw. what kind of card is it anyway? Does it use a 0k2-Chip?
thanks
My System:
AMD X2 3800
Asus A8V (Via KT800pro, AGP)
Nvidia 6600GT (AGP)
024 Mbyte RAM (conservati've timing)

I cant promize anything, but it should work. X-FI and Audigy 2 work just fine with C&Q enabled. So Audigy 4 should work fine too.

Qosmio G20 error message: problem with cooling system has been detected

I am attempting to fix a Qosmio G20 (which is about 3 years old, so no longer in warranty).
The error message is: Warning: A problem with the cooling system has been detected.
I have managed to remove the outer case and observe the machine working, and basically one of the fans is not operating at all. The fan which is nearest to the power connector seems to be working fine (it seems to spin quite a lot, dont know if this is normal), it is the other fan which does not seem to move at all.
When I reattached the case and switched the machine on I noticed after a few minutes that the heatsink vent of the working fan got quite warm, whereas the vent of the non-working fan stayed cool.
I have cleaned the fan of dust and have also altered the BIOS to battery mode from high performance mode, but still the problem exists.
I would be grateful if someone could advise whether the problem is the fan or something else.
If the fan is the problem, where can I buy one from (I live in the UK)?

Hi
In my opinion there could be something wrong with the cooling module and the replacement would be necessary.
Usually this should be done by an authorized service provider (ASP) in your country.
The technicians could replace it with a new part and also could renew the thermal grease which is placed between the cooling module and CPU.
Therefore contact the ASP in your country and ask for the further handling!!!
By the way; you can purchase the cooling module also from the ASP!!!
Good luck

Xfi xtreme gaming - problems with microph

hi, i just bought the xfi xtreme gaming sound blaster. but in the teamspeak, other mates hear there voice with hall, my voice and everything that?s happening on my pc, for example the music i ?play on my computer and the soundeffects in my games and sounds in windows. another problem is that, if i change the sound mode (for example from entertainment mode to gaming mode and back) my mixer settings reset. so what can i do?

i have already checked 'micrphone' in the recording settings. when i go to the xtreme gamer mixer settings, and i select the microphone under 'rec', another line with microphone appears and i don?t know what that mean. a buddy bought the same soundcard and has exactly the same problem. i can fix it for my daily usage (setting the teamspeak voice activation volume a bit louder and the record volume some quieter. but i think if i will record some music with the microphone (i play in a band), the problem will still be there (record all that i hear through my speakers / headphones)
the problem is still there, so i didn?t solve the problem! i just decrease the symptoms!
Message Edited by -Apoc- on 0-27-2008 0:29 AM

Having problems with playback being quiet after burning to CD

Hey everyone..
OK... this is a weird one... well im hoping its an easy one and im just missing something.
OK so i edit music together for a dnace group so ts basically blending songs together using MP3's. Once finished i create a mixdown and burn to CD.
The problems occurs when we perform at venues with big sound systems :It just plays back quiet when everyone else music is fine :S but when we play it on a normal to medium size system its fine.
Please help as its so frustration.
Thank you in advance

This could well be one of the few genuine examples of "everyone is out of step but me".
There is a tendancy these days to burn CDs at the hottest possible level and also to over compress the music so it has little or no dynamics (and very little "life) left. I suspect the other CDs are burned like this. On a controlled system, your versions probably sound fine but compared to the over-hot, over-compressed stuff, yours sounds quieter.
That said, theatre venues can be remarkably noisy places for playback. A shuffling, coughing audience, air handling, candy wrappers and (nowadays) the scourge of moving lights can mean you compete with a lot of background noise.
My main involvement in sound is for live theatre work so I prepare a lot of CDs for playback. When that's the only use I'm going to have for the CDs, I tend to put in higher levels and more compression than I would for normal listening. However, I tend to do this "by eye and ear" rather than using an automatic compressor. My method would be: (look away, Steve G...I'm going to mention hard limiting.)
1. Prepare my track in the normal way.
2. Normalise to -.1dB.
3. Examine the Audition display of the whole track. Generally, there will be a few transient peaks that represent the highest level with most of the track being a few dB lower. I note the level of the highest "general" part of the track.
4. In Edit View, I use Effects/Amplitiude/Hard Limiting to hard limit the track to -.1dB and I use the "Boost input by ____ dB" to raise the signal so the "general" level is now the maximum.
Obviously this requires a bit of a judgement call do decide what you consider the "general" level. However, with a bit of practice you can get you levels as high as possible without killing all the dynamics.
The other thing to say is this only works if all your tracks are reasonably similar. If, since you're putting together a medley of different tracks, there are huge differences to start with, you should even these out during the mix process.
Hope this helps.
Bob

Gaming problems with the K7N420

Hi guys - I need some help
I've been running with my K7N420 board from MSI for over a year now with very few problems - but then I've never really stressed it that much.
Last week, I purchased an "oldish" game - Indiana Jones and the Infernal Machine - Oh if I had known how prophetic the title was!
I got help from Lucas Arts initially to check that it would run OK on my W2K OS, and together with info from microsoft on W2K SP1 supporting this game (it was named explicitly) I thought I would have few problems. However ....
Once I got over the initial problems of turning off the virus checker and screensaver, I got into the game and started playing - only to find that on occassions the screen just blanks out as one solid colour - typically the colour of an object I've just picked up. Mostly I can't recover from this and have to CTRL_ALT_DEL out of it.
I am assuming that this may be due to some video incompatiblity with the intergated graphics, but I need some suggestions as to what I should tweak in the nVidia video drivers to get it to work.
Any suggestions (other than to get the latest game The Emperoros Tomb!)
Oh and specs'
MS6373 (K2N420) Bios 2.6
256MB RAM
Windows 2000 SP1
nVidia Unified drivers 2.03
DirectX 8.1
Cheers for your time
Nick

deepknight: Thanks for the suggestions - but it should work with W2K - also, I thought that the unified drivers for Win95/98 weren't up to scratch???
frenchy2K1:
I'll try the detonator - via a different source it has alos been suggested that I try re-installing the unified set 2.03 again, apparently one should remove the old set first before installing the upgrade - this is something I hadn't done...
as for DX9 - it was something I was planning to do, I have been using this game on a Win98 machine (Laptop) with DX8.1, with no problems - so I assumed that DX8.1 was OK???
Games settings - I'll check these tonight (the offending set up is at home, and I'm reading this forum at work...).
What would be sensible settings, could changing these stop it working?
Does this means that changing the driver settings may make a difference? Where do you start trying to sort this??
I've contatced LucasArts tech support, so far I've only got their offiical line which is "This game was not designed with support for Windows 2000...." "Download the latest compatibility updates from microsoft...." "We cannot guarantee it will work...."
I'll try the alt-tab and see what happens
I'm already runnung with SP3
Thanks for helping
Nick
btw
It runs OK on the laptop - but
(a) The screens horrible for gaming
(b) The sounds naff
(c) I got the nForce machine for games, not the Laptop!!!!

Can't restart with Cool n Quiet (FIXED!!!!!!)

Anyone else having problems restarting PC from within XP sp2 with CnQ enabled? My PC shuts down but will not POST again unless I reset or powercycle my PC. I read another posting that said to increase your vcore to 1.55. Tried that but didn't work for me.

Quote
Originally posted by tritium4ever
Cool, glad you figured it out. As soon as I replicate the problem and your suggested fix, I'll add it to my CnQ FAQ.
Could be an isolated problem. As archermoo stated, he doesn't have any problems setting his multi to "startup". But it definately solved my problem.

Gaming problems with envy m6-1213tx

I bought hp envy m6-1213tx laptop in June 2013.
I want to know why do games lag on this laptop inspite of the good specifications.
These games do not lag on other brands' laptop with similar or even lower configuration.
How do I solve this problem?

I have few more doubts with this model. which i would like to discuss with someone who can help me here.

Warning: There is a problem with cooling

I just bought my Qosmio 6 days ago and just now received this warning to shut down my laptop immediately and contact a repair service or something like that.
Brand new laptop, how can this be...I am still using it because it's not getting hotter then normal, should I be concerned and call toshiba or should I just keep using it?
What can the problem be?

Hi
First of all errors can happen on all notebooks, also on new notebooks they are only few days old. So it makes no difference how old your notebook is because they consist of electrical parts.
Anyway, I agree with the user above. Take a photo of this error and contact your local dealer. Maybe you can get a new notebook or it will be repaired under warranty.

J2me Gaming : Problem with Creating build(jar) for nokia phones

Hi,
I am having trouble in making a package (jar) for nokia phones. I have been tring using J2ME wireless kit, Eclipse, Nokia development Suite and IBM Device developer but havent been able to make a perfect package out of it.
I have even downloaded the plugins for Eclips but not able to configure it properly. I did every thing according to the specifications. but while building project i get the error "Problem while running the build script ....." .
Overall i want create a jar package and obufuscate that for Nokia phones.Its real urgent. Wud want someone to guide me on all the necessary.
Thanks in advance.

Hi,
yeah I can recommend - get Sun ONE Studio 5, Mobile Edition (http://wwws.sun.com/software/sundev/jde/studio_me/early_access.html). That's pretty much about it (obfuscation included, .JAR file creation in no-time).
Peter

Is there something wrong with cool'n'quiet on my system?

A64 3200+ Winchester, Neo2 Platinium 1.4 BIOS. I turn on c'n'q and it runs at 200x5.
I fire up Toast and Prime 95, turn on WCPUID's real time clock and the thing NEVER increases the speed.
I downloaded the newest driver for the CPU from AMD, still nothing. This is a fresh load of XP SP2 + Windows Updates + nVidia's driver set off the website.

I had to disable my Cool and Quite in bios otherwise it was a huge perfromance hit. I know there is a sticky at the top in regards to CnQ but thats too much to read

MOVED: [Neo4-F/Venice] Problem with downclocking

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=136087.0

I found the main problem.
I have two versions of windows:
- xp pro sp2 integrated 01/2007
- xp pro sp3 integrated 12/2009 performance edition, integrated all driverpacks
Because I found some problem with hdd <-> mainboard communication in smart, i tried with some other hdd and tried to create all partitions once again.
During installing xp sp3 on both hdd, i got bsod 0x7f/0x8e after decompressing driverpacks. This showed that this is not a problem with hdd. So I tried to install xp sp2 and it was working properly. Then I was installing drivers to verify which may cause problems:
- graphic card - working
- nforce - working
- AMD Cool'n'Quiet - working
- RMClock - bsods after each decrease of multiplier or voltage, cpu can work only on 9x and 1.4V
Because it is problem with Cool'n'Quiet, I guess that it may be a problem with windows sp3 because driverpacks integrates AMD CnQ drivers. So I disabled CnQ in bios and tried to install xp sp3 once again. And.. it is working !!!.
So the problem is with Cool'n'Quiet. I can't change any parameters of cpu because I get bsod each time. The best way is to disable CnQ in bios. On 1.4V and 9x it is working properly, no bsod under superpi and other cpu testing programs.
I tried also to modify cpu multiplier in bios. Each decrease cause system freeze after showing system info in table and system can't boot. It is working only on 9x.
Is it a problem with mainboard or cpu?

[Neo4-F/Venice] Problem with downclocking

Hi
I have a problem with Athlon64 Venice 3000+ (1800MHz/1.4V) E3 on MSI Neo4-F mainboard. This system was working properly for ~5 years under following conditions. CPU was overclocked to 2250MHz (250MHz, 1.4V, HT 4x, DDR 208MHz). In idle it was downclocked to 5x multiplier at 1.1V using RMClock.
A few days ago Windows was giving a lot of BSOD randomly. Then I went back to basic frequency but it didn't help. I checked memory with Memtest also but there was no errors. So I decided to reinstall windows.
After Windows installation was completed everything was working. Then I installed AMD CnQ driver and RMClock. And I found the reason of BSODs. CPU works properly with 5x and 9x multiplier (several minutes in SuperPI) but system halts after changing the voltage. Down to 1.225V everything is OK but then I set 1.2V and I get BSOD immediately. CPU temp is normal (23C idle, 38 load) and all fans are working.
Why I can't lower the voltage to the factory 1.1V in idle? Is it a problem with CPU or mainboard?
Regards

I found the main problem.
I have two versions of windows:
- xp pro sp2 integrated 01/2007
- xp pro sp3 integrated 12/2009 performance edition, integrated all driverpacks
Because I found some problem with hdd <-> mainboard communication in smart, i tried with some other hdd and tried to create all partitions once again.
During installing xp sp3 on both hdd, i got bsod 0x7f/0x8e after decompressing driverpacks. This showed that this is not a problem with hdd. So I tried to install xp sp2 and it was working properly. Then I was installing drivers to verify which may cause problems:
- graphic card - working
- nforce - working
- AMD Cool'n'Quiet - working
- RMClock - bsods after each decrease of multiplier or voltage, cpu can work only on 9x and 1.4V
Because it is problem with Cool'n'Quiet, I guess that it may be a problem with windows sp3 because driverpacks integrates AMD CnQ drivers. So I disabled CnQ in bios and tried to install xp sp3 once again. And.. it is working !!!.
So the problem is with Cool'n'Quiet. I can't change any parameters of cpu because I get bsod each time. The best way is to disable CnQ in bios. On 1.4V and 9x it is working properly, no bsod under superpi and other cpu testing programs.
I tried also to modify cpu multiplier in bios. Each decrease cause system freeze after showing system info in table and system can't boot. It is working only on 9x.
Is it a problem with mainboard or cpu?

Gaming problem with Cool n quiet ?

Similar Messages

Maybe you are looking for