Gaming problems with envy m6-1213tx

I bought hp envy m6-1213tx laptop in June 2013.
I want to know why do games lag on this laptop inspite of the good specifications.
These games do not lag on other brands' laptop with similar or even lower configuration.
How do I solve this problem?

I have few more doubts with this model. which i would like to discuss with someone who can help me here.

Similar Messages

Monitor problem with envy dv6-7214nr

I have a problem with my monitor. At the very top there is a single line that keeps flashing. What could the problem be? A bad monitor? Or something else?

Hi Antlan,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP ENVY dv6-7214nr Notebook and getting a flashing line on the screen. Try performing a hard reset. When performing a hard reset please note remove any and all USB devices, and remove memory cards from the card reader slot. Disconnect all non-essential devices. If that does not help try to turn on the computer you start to press F11 repeatedly till the menu opens. You can do a system restore. You could check for a BIOS update.
Hope this is helpful.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Recovery problem in envy m6 1213tx

my laptop model no.-hp ENVY m6-1213tx
product no.-D9H29PA
when I power on my laptop it shows ,
Recovery
error code:0xc0000001
and threre is an option to press ESC for UEFI Firmware setting and after pressing ESC startup menu appears & there is an option for recovery i.e. f11 .After pressing f11 it again comes to its iitial stage after one or two minutes . memory test,HDD test are passed and i am having the DVD of recovery so now what to do?please anyone help me.
thank you in advance.

my loptop model is envy m6 1213tx .
when I go for recovery by pressing f11 it doesn't go for recovery & it ask to go for system administrator or system manufacturer

My Book 3.0 (1TB, USB 3.0) detection problem with Envy Phoenix 810-135qe

I have a My Book 3.0 (1TB, USB 3.0)... The older My Book not the newer one... "My Book Essential" or something like that.
I was using it with W7 x64 backup utility on an older HP desktop (HP Pavilion a6560t) without issue up to the day my new HP Envy 810-135qe arrived. I downloaded the latest drivers from WD support, and the thing PnPed fine off the non-powered USB 3.0 on the back of the 810. However, the 810 drops connection after sleep, hibernation, lock, or simply just over time. I've run diagnostics on the WD and the cables, all checked out fine. I tried shutting off power saving to the USB 3.0s in device manager (just a guess), and that seemed to work for a few weeks, however I'm still having the detection issue periodically. All of my drivers are up to date on the HP side. I'm fully reformatting the WD now to see if that might somehow fix the issue (I'll update in a few days on how that worked out).
Anyone have any idea what's amiss? I suspect something with the BIOS. HP chat support has been no help (they go through the same checks I've already done myself) and they got really spooky on another chat when I asked about adding a SSD as the boot drive (I knew it was an issue from here and other forums).... Handed me off to second tier support, and all they would tell me is that they couldn't tell me anything... Basically, no support for any config except for how it was shipped because it's a "custom build" (yes, buyer's regret big time).
Secondly, anyone running a similar config with a en external back up that's running smoothly? My WD is getting old so I was thinking of one of the newer portable USB 3.0 HDDs (both 2.5 and 3.5). My specs follow.
HP Envy 810qe - Win 7 (810-135qe)
Product number: F9A63AV#ABA
Windows 7 Home Premium 64
4th Generation Intel(R) Core(TM) i7-4770K processor quad-core [3.5GHz, 8MB Shared Cache]
4GB Nvidia GeForce GT640 [DVI,DP,HDMI & VGA via adapter]
12GB DDR3-1600MHz [2 DIMMs]
2TB 7200 RPM SATA Hard Drive
16GB mSATA SSD Cache
Microsoft Office Trial
Security software trial
Blu-ray Reader & SuperMulti DVD burner
15-in-1 Multi-slot Media Card Reader, 4 USB Ports (Front/Top), Audio [Front 2USB2.0, Top 2USB3.0]
No TV Tuner Card
Integrated Sound, Envy Audio; Beats Audio
HP USB keyboard and optical mouse
HP Wireless 802.11 a/g/n with Bluetooth(R)(2x2)
HP Home & Home Office Store in-box envelope
This question was solved.
View Solution.

Anglogator, welcome to the forum.
I have the exact computer (See my signature below.). I have installed a Samsung EVO 840 500 GB SSD. It works absolutely great. Samsung SSD's seem to be the only brand that boots without changing any settings in the UEFI Firmware. If you decide to buy one, I will be glad to walk you through the installation process.
I also have a "WD My Book Essentials" 2 GB external hard drive. It works perfectly without making any changes to the BIOS.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Xfi xtreme gaming - problems with microph

hi, i just bought the xfi xtreme gaming sound blaster. but in the teamspeak, other mates hear there voice with hall, my voice and everything that?s happening on my pc, for example the music i ?play on my computer and the soundeffects in my games and sounds in windows. another problem is that, if i change the sound mode (for example from entertainment mode to gaming mode and back) my mixer settings reset. so what can i do?

i have already checked 'micrphone' in the recording settings. when i go to the xtreme gamer mixer settings, and i select the microphone under 'rec', another line with microphone appears and i don?t know what that mean. a buddy bought the same soundcard and has exactly the same problem. i can fix it for my daily usage (setting the teamspeak voice activation volume a bit louder and the record volume some quieter. but i think if i will record some music with the microphone (i play in a band), the problem will still be there (record all that i hear through my speakers / headphones)
the problem is still there, so i didn?t solve the problem! i just decrease the symptoms!
Message Edited by -Apoc- on 0-27-2008 0:29 AM

Gaming problems with the K7N420

Hi guys - I need some help
I've been running with my K7N420 board from MSI for over a year now with very few problems - but then I've never really stressed it that much.
Last week, I purchased an "oldish" game - Indiana Jones and the Infernal Machine - Oh if I had known how prophetic the title was!
I got help from Lucas Arts initially to check that it would run OK on my W2K OS, and together with info from microsoft on W2K SP1 supporting this game (it was named explicitly) I thought I would have few problems. However ....
Once I got over the initial problems of turning off the virus checker and screensaver, I got into the game and started playing - only to find that on occassions the screen just blanks out as one solid colour - typically the colour of an object I've just picked up. Mostly I can't recover from this and have to CTRL_ALT_DEL out of it.
I am assuming that this may be due to some video incompatiblity with the intergated graphics, but I need some suggestions as to what I should tweak in the nVidia video drivers to get it to work.
Any suggestions (other than to get the latest game The Emperoros Tomb!)
Oh and specs'
MS6373 (K2N420) Bios 2.6
256MB RAM
Windows 2000 SP1
nVidia Unified drivers 2.03
DirectX 8.1
Cheers for your time
Nick

deepknight: Thanks for the suggestions - but it should work with W2K - also, I thought that the unified drivers for Win95/98 weren't up to scratch???
frenchy2K1:
I'll try the detonator - via a different source it has alos been suggested that I try re-installing the unified set 2.03 again, apparently one should remove the old set first before installing the upgrade - this is something I hadn't done...
as for DX9 - it was something I was planning to do, I have been using this game on a Win98 machine (Laptop) with DX8.1, with no problems - so I assumed that DX8.1 was OK???
Games settings - I'll check these tonight (the offending set up is at home, and I'm reading this forum at work...).
What would be sensible settings, could changing these stop it working?
Does this means that changing the driver settings may make a difference? Where do you start trying to sort this??
I've contatced LucasArts tech support, so far I've only got their offiical line which is "This game was not designed with support for Windows 2000...." "Download the latest compatibility updates from microsoft...." "We cannot guarantee it will work...."
I'll try the alt-tab and see what happens
I'm already runnung with SP3
Thanks for helping
Nick
btw
It runs OK on the laptop - but
(a) The screens horrible for gaming
(b) The sounds naff
(c) I got the nForce machine for games, not the Laptop!!!!

J2me Gaming : Problem with Creating build(jar) for nokia phones

Hi,
I am having trouble in making a package (jar) for nokia phones. I have been tring using J2ME wireless kit, Eclipse, Nokia development Suite and IBM Device developer but havent been able to make a perfect package out of it.
I have even downloaded the plugins for Eclips but not able to configure it properly. I did every thing according to the specifications. but while building project i get the error "Problem while running the build script ....." .
Overall i want create a jar package and obufuscate that for Nokia phones.Its real urgent. Wud want someone to guide me on all the necessary.
Thanks in advance.

Hi,
yeah I can recommend - get Sun ONE Studio 5, Mobile Edition (http://wwws.sun.com/software/sundev/jde/studio_me/early_access.html). That's pretty much about it (obfuscation included, .JAR file creation in no-time).
Peter

Gaming problem with Cool n quiet ?

Hi there,
I've enabled cool'n'quiet in the Bios, because my fan was doing too much noises.
So now in CPU-Z, the multiplier is x5. But the problem is that is STAY at x5 even when i'm playing game like DOOM3 or Half-Life 2.
So it is lagging a lot in the game, but it doesn't crash (thank god).
I wonder why my fan don't ajust itself, because it should right? CPU go 100% but the multiplier and the fan speed stay don't move.
Thanks,
TanGU.

Quote from: blazing storm on 01-April-05, 06:48:40
Try enabling cool n'quiet in the bios. I had the same experience when I first built my pc a while ago.
Uh... thanks but, like i said:
Quote
Hi there,
I've enabled cool'n'quiet in the Bios, because my fan was doing too much noises.

Problems with pacman applet, and advice on a gaming portfolio

Hi
I recently made a pacman applet, im having a few problems with it though, the first time the applet is run on a browser, the ghosts(represented by squares) often dont appear or if they do, they are stuck in walls, this never happens when i run offline on my computer. Is this because the very first time the applet is run, it doesnt load properly, but the second time some of the files are in the cache so it loads fully?
Also everytime i refresh the browser the applet dissapears and is replaced with a blank space and a cross in the top left hand corner, does anyone know the reason for this?
The applet can be found below, if you do decide to play it, please bear in mind what i have said, so it might not load correctly the first time, if this is the case please refresh, or close the broswer and reopen the link! Also you will need to click the applet for it to gain focus before you can move pacman - use the arrow keys the control pacman.
http://www.renaissance-designs.co.uk/Satwant/java/pacman/
Id also be very gratful for some advice - id like a change in career, ive always wanted to get into gaming, ive had some previous knowledge in java i made a programme that could generate its own poetry in java for my dissatation, but i still never had a huge amount of confidence, and so went into websites.
BUT now i have decided to take the leap back into programming and give it a go, which is why ive made this game.
I thought id make a portfolio and try and apply for a few gaming jobs. This applet took me two weeks to make and it was in my spare time, i am fully aware its not perfect, and it doesnt look great, but i would like to know what people think of it, also how many more games do you think i should make, before i apply for gaming jobs? Does anyone have any advice on what would make a good portfolio for a java gaming job?
Thanks alot, i look forward to what you think of the game, and your advice!
SSKenth

sskenth wrote:
Thanks for getting back to me with that information, i didnt know you could see that information with just a simple right click!
But im afraid that doesnt really help me solve the problem, im not sure what all of that information means! :SI have very little experience with applets, but I can tell you what I would do to debug this (forgive me if you already know this stuff).
Look at the stack trace you get in the Java Console that I posted earlier. Each line contains a method that was called from the method on the previous line. So, java.lang.Thread.run() called sun.applet.AppletPanel.run(), which called Room.init(), etc. Look at the topmost line whose method is something you wrote, not something in the standard Java libraries. In your case it looks like PaintSurface.java (specifically, line 22). Look at what line 22 of PaintSurface.java is doing, it's calling Thread.start(). If you check out the Javadoc for Thread.start(), it says IllegalThreadStateException gets thrown if you call start() on a thread that has already started. So that's your problem. Without looking at your code, I'd assume you want to stop your thread in your applet's destroy() override, and instead of reusing it, create a new one each time init() is called.
Ill try and look into, thanks again though, it gives me somthing to work with :D
Btw when you first ran the applet, did all the ghosts(3) load up correctly?Unfortunately, no. The first time I ran it, there was only 1 ghost (or maybe all 3 overlapping each other?) at the top of the screen, and they never moved. Refreshing once made the game play as I think you want it to. Refreshing a third time gave the dreaded red X.
...oh and just out of curiosity,,, did u have fun playing the game :DSure did.

Problem with Audio on HP Envy 6-1130sw (C6F62EA)

Hello everyone.
I have a problem with audio on my ultrabook HP Envy 6. Sometimes when I try to play music there are no low tones and music plays really silent... And then when I restart PC problem dissapears and music plays fine... I thought there is a problem with speakers, but when I connected 5.1 speakers there were also only high tones. Same thing happens on headphones. Is it a hardware problem or maybe software? Actually I use Windows 8.1 and drivers are up to date. If any one of you had same problem please post.
Thanks.

Hi piotrek1130sw,
From what you have described, I think the best approach would be to restore the original IDT driver, restart the computer, test that driver, then install the driver update, and test the outcome of installing the newest driver.
Use the following link for instructions to recovery the ITD driver using Recovery Manager. Restoring applications and drivers.
Once the driver is restored, restart the computer and test the audio. If the audio is good you can continue to use this driver, or you can reinstall the update and see what happens. IDT High-Definition (HD) Audio Driver.
If installing the newest driver causes the issue to occur but the recovered driver worked, I suggest recovering again.
If neither driver works I will gladly follow up and provide any assistance I can.
Please let me know the outcome.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Problem with JPWR2 on a X99S GAMING 7

Hi,
Currently I have a problem with JPWR2 on a X99S GAMING 7 Motherboard. When I plug a 6 pin or a 8 pin on the JWPR2 the motherboard crash and the cable overheat or short-circuit. My power supply is a 1000W SIlent pro bronze. I tested with a new cable on another port on the power supply but it doesn’t work. I tested with without CPU too but still the same problem.
Can someone help me ?

you are using the Cooler master 1000W silent pro bronze right?
Normally the power supply should have 4 pin or 8 pin, the 6pin/8pin is normally for the VGA card and not for the Motherboard.
Please double check again and use the 4 pin or 8 pin for the MB.

HP Envy 15 Graphics Problem with Windows 8.1 (Intel and NVidia Graphics). Help!

I bought an HP ENVY TouchSmart 15-j013ea about 6 months ago and I have had a major problem with the graphics that I cannot seem to solve. I think it started when I updated to Windows 8.1, even though I am not 100% certain.
I have noticed the following three problems, and I think they are related:
Some windows (such as Chrome, Skype, or even Device Manager or other windows) are very blurry compared to others.
The firefox menu window has some deformed black arrows instead of the normal ones.
When playing a game (specifically, Star Wars the Force Unleashed 2), after a while I get an error that the computer has ran out of memory. However, according to task manager, only about 50% is in use, not to mention that I have 8 GB of RAM + 2 GB graphics memory. At the same time, the computer gets rather loud (like a fan working overtime) and hot.
The laptop has both Intel and NVidia graphics, and both are enabled in Device Manager. To be honest, I have no idea which is used when, or how to check that (let me know if there is a way)
I have tried the following without success:
Uninstalling the Intel graphics driver from device manager and installing a version I downloaded from the HP website for my laptop and OS. After that, Windows would NOT BOOT, and I had to do a system restore.
Uninstalling the Intel graphics from Programs and Features, and installing 2 different versions from the Intel website. Nothing changed.
Updating Nvidia driver through GeForce Experience. Nothing changed.
Updating Intel drivers from Windows Update. Nothing changed.
Quite frankly I am not sure what the problem could be, since the graphics versions are supposed to be compatible with WIndows 8.1. I also don't get why some windows are blurry and others are not. I am thinking the computer uses only the Intel graphics and not the Nvidia (at least in the blurry windows), but even if that was the case (and it shouldn't be), I don't think I should be having this problem.
At this point, I really need help. My graphics details are:
Intel HD Graphics 4600: Driver version: 10.18.10.3412
NVidia GeForce GT 740M: Driver version: 335.23
NVidia GeForce Experience version: 1.8.2
I am attaching screenshots that show driver details and the problems.
Thank you.
Blurry Chrome:
Firefox menu problem:
Device Manager and driver windows are also blurry, both graphics are shown

I had a similar problem with a Dell laptop. I found the problem was the laptop wanted to switch between the Intel and NYIDIA video cards. It would switch to the Intel when high graphics was not required then to the NIVIDIA when high graphics was required. The laptop does this to save power when high graphics is not required but it caused problems with some applications, specifically high graphics games.
For me the solution was to disable the Intel graphics processor. You can do this by right clicking on your Wallpaper, select the NIVIDIA Control Panel, then select Set Physx Configuration. You will see a dropdown box labeled Select Physx Processor. It is set to Auto by default. This allows the switching I described. Select this dropdown box and select your NIVIDIA processor. This will prevent the laptop from switching and force it to use your NVIDIA processor exclusively.
Hope this helps.
Sacto Fred
Owner and CEO
H&O PC Soultions

Problem with Hp Envy 17 1190en overheating, 10 months old and 3 times in warranty repair!

Same problem with hp envy laptop and no success with repaird laptop, all the time same problem motherboard melt up. I use all the time notebook cooler and laptop breaths more than it needs but it doest work normaly. Temps are wiht cooler bad normally in internet 76 and plaing games are temps over 100.
Is it possible hp give me new series envy or they repair it hundred times?
Thank you, sorry about my english .

Hi,
Please provide us the complete model of your system along with the operating system, so that we can better assist you.
How to locate model number for your notebook:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00033108
It would also be good to know where you are located.
R
Although I am an HP Employee, I am speaking for myself and not for HP.

Problem with HP Envy 15-j009 WM

I have a problem with my laptop HP Envy 15-j009wm buy it a few days ago and randomly conjelada stays. When conjela I have to turn it off forcefully. Realize you already extensive test and passes all but the problems persist.

Hello @BlackXtreme,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your notebook is not able to power off without forcefully turning it off. When you mentioned "conjelada", is this a program that is frozen on your computer screen? Which tests have you performed when diagnosing this issue? I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate which operating system you are using; and whether your operating system is 32 or 64 bit. The more information you can provide, the better!
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
Cheers!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Hp Envy m6-1105dx. Problems with my charger.

Product Name: Hp Envy m6-1105dx
Operating System installed: Windows 8
I'm going to keep this simple.
I bought this computer on February 20th, 2013, so up to this date It's been over a month. I've never bought a laptop before, and in just a little over a month...started to have these kind of complications.
Since this is the hardware section, lets start with that.
I plug in my charger, it does not work. I try a second time, and we have the same result. I have to continuously plug the charger in, and out in order to receive a charge.. I call this the "Hopefully it works” method. Problem number two, is that everytime my computer goes to sleep, the charger shows that it doesn’t register anymore....and this sets us back to problem one.
This is a new laptop, so I believe problems with the battery really shouldn't be showing me these kinds of complications. I’m very frustrated at the fact that my laptop’s battery or charger will not work.
For any other information that might help....
Yes the battery is in, Yes my charger is plugged into the wall, and yes I've reset my computer to check if this problem would still Reoccur. The only thing I didn’t do is replace my battery, or charging cable. The reason being is that i just bought this computer.
Thank you very much for reading this topic, sorry for the “Ranting” kind of approach, but I hope you can see my frustration.
Any advice, or basically a solution to my problem will be very much so appreciated.

Unfortunately it appears you got a lemon. It happens. If you have a return right at the point of sale, exercise it. Otherwise call HP and work your way through the phone tree to see about returning it. The only other possibilty is that a BIOS update was just released on 3-15
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-116472-1&cc=us&dlc=&lc=en&o...
Of course you are going to have to catch it when it is working and the BIOS update entails a bit of risk if the computer crashes during the update. I would call Customer Service and ask them if they want you to try the BIOS update. Before they authorize a return they are going to make you go in and reset the BIOS to defaults and muck around in there a bit anyway.

Gaming problems with envy m6-1213tx

Similar Messages

Maybe you are looking for