Gap between glass and metal band.

I have a really thin gaps between the glass and metal band in the upper front and back right corner, and was wondering if anyone else has noticed small gaps between the glass and metal band anywhere on their phone. ive had nothing but crappy customer service at both apple stores near me, but was eventually told by the "genius" that i could come back with another appointment before the 30 days and swap for a new retail phone in the box.
The only thing that worries me is getting a whole new phone with more different problems then the one i have with only the gap issue. The "genius" also told me that im the first one that has had this issue, yet ive seen threads about a month or so ago with people saying they had the same issue. so as an update, has anyone noticed this now?
Message was edited by: xalexinchainsx
Message was edited by: xalexinchainsx

ya, but this isnt the first time ive had bad customer service with apple. Granted it was a different apple store, but about 3 days after i bought the phone i made an appointment, and took it in for the same separation issue. This time the guy seemed almost clueless as he had to ask his co workers questions i was asking him. Thankfully a manager overheard the situation and informed him that it was an issue that needed to be taken care of. So the guy goes to the back, comes out with a phone from the black box (At the time i had no clue of how the black boxes worked), and i ask if it was a new or refurbished phone, and he assured me it was a new one.
So after inspecting the phone i noticed another gap in the glass and told the worker and he replies with "its not that bad, i dont think yours was that bad either". after seeing the same issue and getting his response, i decided to just keep mine and make a different appointment at another store (Today). Oh, might I add that after we leave the store, my girlfriend tells me that as i picked up the phone to inspect it, the guy rolls his eyes. Just experiences like these leave a biter taste in my mouth. its sad that a couple experiences from non corporate workers would make me start to dislike a company.

Similar Messages

  • Xperia z3 D6603 concern over gaps between glass and frame.

    Hello,
    I recently upgraded my ion to z3. And there is no doubt that it's an amazing phone.
    But I have some concerns regarding the small gaps between glass panel and metal frame. It gets dust and more over that I am worried about its waterproofing. I want to know is it normal for all z3 out there or is it just me? What if it can't handle water in this regard?
    There are some pictures.
    Solved!
    Go to Solution.

    This subject has been mentioned many times before, from the Z all the way thru the models up to the Z3.......you have to have some uniform gap between the panels & the bezel...this is to allow some form of expansion due to temp changes, if you think about it.......if it was packed tight & the phone heats up the expansion would have nowhere to go resulting in damage. The gaps do not mean that you have a waterproof issue either.....
    Hope this helps 

  • Gap between glass and bezel on iPhone 5?

    http://www.flickr.com/photos/78962116@N07/8405746907/in/photostream/
    See the link above (theres a picture) for the image.
    So guys, I purchased my iPhone 5 this Saturday and, having not dropped, banged, or anything of the sort to my phone since then, I noticed this gap between the glass pane at the top of the phone's back and the bezel surrounding the device.
    I am so completely OCD about things like this, and so everytime I pick up my phone, I have to look at it... I hate it. I have looked at several other white iPhone 5s in person, and none have this issue. I am debating wether to take it to the Apple Store or not.
    Also, the sleep/wake and volume buttons feel extremely loose and they were not on either of the other devices I held.

    What if I purchased the phone from an AT&T store, not an Apple Store? Will that affect anything? And how long do I have the warranty until (I have a normal warranty, not extended)?
    ^Sorry for all the questions!

  • IPhone 5 - gap between display and metal frame

    Hello, I have an iPhone 5 black and I found out that on top between metal frame and display is a gap where I can fit a paper. Is it okay? What should I do?

    Have the same issue & plan to send to Apple to replace/repair. Was wondering if you know by chance how long this fix will take?
    (Tried to reopen my support case to ask Apple directly but it keeps failing to open)
    Thanks.

  • Gap on the top between glass and alu frame?

    Is it normal if my 3 week iphone 5 has small gap on the top between glass and alu frame? Is it covered with waranty?

    I send my iphone on t-mobile repair service and they didn't change my iphone, so they said that i need to contact apple and wait if they approve changing for new iphone, so please tell me how to contact apple support and send them this image below, sorry for my bad english.

  • Two days before my iphone 5 battery was expand and display screen came out and now there has some gap between frame and display.so how it will happen and i already got before months.now i need to backup all the data to icloud before through out.

    two days before my iphone 5 battery was expand and display screen came out and now there has some gap between frame and display.so how it will happen and i already got before months.now i need to backup all the data to icloud before through out.
    https://www.dropbox.com/home/iphone
    https://www.dropbox.com/home/iphonehttps://www.dropbox.com/home/iphone

    Make an appointment at the genius bar of your local Apple Store. The phone has a 1 year warranty. If it's no longer under warranty, a replacement is $269.

  • Gap between plastic front panel and metal band

    hello, i have noticed a gap between the front plastic and the metal band when taking the iphone off a case. theres a 1mm gap between the plastic and metal, and 3 small cracks along the edge of the plastic, 2 at the top and 1 at the right side. the gap is at the top of the phone from the power button to the edge. the front glass doesnt fit perfectly anymore because the top end of the plastic is raised whilst the rest is flat.
    how do i get it repaired?
    thx

    This damage is to the front screen assembly. This is handled at Apple Store with perfect Replacement iPhone 4 exactly like yours for $149. Maybe much care, skill and very small, less than drop of super glue, will correct this.

  • Gap on bottom between glass and frame

    Hi all,
    I got a D6653 last week, absolutely loving it BTW.  However, I've come to noticed a decent gap on the bottom of the device, between the glass and frame.  I don't see the same gap on top, which makes me think it's a manufacturing issue.  But, when I look at the back of the device, I see the same thing.  Does anyone else see this?  Is it normal?  This is my first Xperia device.
    The gap is starting to collect particles and it's looking very unattractive about now (only in 4 days).  Also, it makes me question the waterproof capabilitly.  I would imagine the phone assembly would have to be very tight to be able to make that promise.
    Would appreciate any feedback, thanks.

    Joshnor713 wrote:
    Hi all,
    I got a D6653 last week, absolutely loving it BTW.  However, I've come to noticed a decent gap on the bottom of the device, between the glass and frame.  I don't see the same gap on top, which makes me think it's a manufacturing issue.  But, when I look at the back of the device, I see the same thing.  Does anyone else see this?  Is it normal?  This is my first Xperia device.
    The gap is starting to collect particles and it's looking very unattractive about now (only in 4 days).  Also, it makes me question the waterproof capabilitly.  I would imagine the phone assembly would have to be very tight to be able to make that promise.
    Would appreciate any feedback, thanks.
    Any pictures?
    It's definitely a manufacturing error, and you should get a replacement. I have the Z2 and have a LOT of gaps. Fortunately the device is still waterproof, but it doesn't feel right when you notice the gaps.
    Just get a replacement (should be covered).

  • Gap between screen and bezel should i take it back to apple?

    Theres a noticable between the screen and the metal bezel, its currently working fine but i dont want the screen to die or the inside to collect up dust over the years. I only recently purchased the red nano and want this to last for a long while. Is it worth it to bring back to the apple store to get this replaced or are all nanos like this with a gap between the screen and bezel (just towards the bottom of the screen only) thank

    You are very welcome, and good luck getting this resolved.  Things like damage and scratches have been brought up on here by users in the past with devices and Apple has been pretty good about dealing with the issues.

  • How to maintain gap between table and graph in a report

    HI,
    I have a report in which a graph is placed below a table  and data in the table gets increased with time , then how to maintain the gap as constant between table and the graph ?? Like i have 50 rows in a table and then next day 10 rows are added but then i want maintain same gap between the table and graph???

    >Right click on chart.
    >Open the property and go to the relative position.
    >Select the distance of the upper left point of the chart in relation to another report element by entering - the number of pixels; the part of the tavfrom which youble want to measure the pixels (in the first drop-down list); the report element from which you want to measure the pixels (in the second drop-down list).
    >Repeat this for the distance of the lower left point of the chart.
    Hope this will help you out.

  • How to decrease the gap between label and input field.. pls respnd

    hi friends,
    I am facing this problem since long time and couldnt get any solution...
    pls respnd,
    i need to decrease the gap between my input field and label.. its very much gap there..
    thanks in very advacne,
    niraja

    Hi WD ABAP,
    i am doing the same, created tcontainer, and just binded my node. i given matrix layout. But i dont know why it is coming like that.
    Also WDABAP, could you pls reply me to the other thread,
    about when im trying to read the dropdown value of subnode, the get_static_attribute or create_element method is going into my supplyfunction.
    supplyfunction - my code is to fill the dropdown. and due to this supply function triggering,
    my get_static_att or create_element is not reruting currenct row dropdown value.
    what am i doing wrong.. can u pls pls.. its kicking me. i have spent my whole weekend on this, but couldnt solve this.
    plsfnds :(((((
    Niraja

  • Gap between header and content in IE

    Hello All
    I subscribed to a post with this basic same question but I
    never got a notification if it got answered or not
    I all of a sudden have a gap between the header and content
    on this site
    http://www.michaelsondesign.com/guestVision/
    - I am not sure why , it started when I added to the menu on the
    left
    Any ideas?
    Thanks
    Rob

    Add this to your CSS
    img {vertical-align:top;}
    You cannot lose until you give up !!!
    "BOC_RUSH" <[email protected]> wrote in
    message
    news:fsn546$nrm$[email protected]..
    > Hello All
    >
    > I subscribed to a post with this basic same question but
    I never got a
    > notification if it got answered or not
    >
    > I all of a sudden have a gap between the header and
    content on this site
    >
    http://www.michaelsondesign.com/guestVision/
    - I am not sure why , it
    > started
    > when I added to the menu on the left
    >
    > Any ideas?
    >
    > Thanks
    >
    > Rob
    >
    >

  • Gap between lcd and digitiser

    Any one find the gap between ipad air lcd and digitiser annoying? I mean it could be better if they were one. Sometimes when tapping a little hard on th screen makes sound as if ita hollow inside.

    I never noticed it before, but yeah it has a larger gap on the right side than on the left...
    But hey, I look at the screen not at the gap. I'm happy to have an anti-glare IPS screen.
    | X220 i7-2620M | 12.5" IPS | Intel 520 Series 180GB Main SSD | Mushkin 120GB mSATA SSD | 8GB RAM | Intel 6205 WiFi | BT | Win7 Pro 64 SP1 |

  • Published site has huge gap between content and footer

    So i have just published my site and when i look at it after being published i have a good 2 inch gap between the bottom of the content and the footer.
    I have read up on a number of bits and pieces and they say you mauy have a hidden container on the pages, which i totally accepted so i searched and nothing. I then thought it might be a issue with the master page i was using, so checked that. Couldnt see it.
    However when i looked through my site and saw the master pages i used i had a mix and some worked and some didnt. Im lost!!!
    I launch on Sat and its a bit of a pain. Has anyone had this issue? The preivew looks fine, so im not sure where this gap is coming from.
    Thanks in advance!

    When Sticky Footer is checked, the footer will stick to the bottom of the browser window unless the page is taller than the browser window.
    Glad that I could be of help.
    Regards,
    Sachin

  • Keeping a Consitent Gap between Content and Footer.

    Hi !
    I spent a couple of days trying to solve how to regulate the space between body and footer on a MUSE-project. I think it‘s worth dropping a few line for humankind.
    We’re on a master-page. Let’s say our standard page has the following properties:
    The Footer-marker is set to y: 500 px
    The Bottom_of_Page-marker is set to y: 650 px
    The Bottom_of_Browser-marker is set to y: 680 px
    These settings mean, you have 150 px height-space for the Footer, starting from y: 500 px.
    If you require more space for the Footer, it’s the Bottom_of_Page-marker you’ll have to drag down ( not the Footer-marker ! ).
    If you’d like to add a gap, so your Footer is not directly sticking to the Content of the page anymore, but you’d rather like to preserve some space between both, you’ll have to drag down only your Footer-elements a little bit, e. g. down to y: 520 px. So, in a way, the 20 px gap created is part of the Footer. No changes must occur to the Footer-marker, at least for this reason. You’ll only eventually drag the Bottom_of_Page-marker down, in case Gap-height + Footer-height require more space than already available (depending on your figures).
    Cheers
    G

    Sanjit, I didn't make any changes to the master at all. It was fine online, then I opened it to make a small type change and it was like this, and I can't get it back to where it was.
    I tried adjusting the footer, but the slideshow is not on the home master page, just the bottom brown part and the type in it.
    I don't know what could have caused it to change from before to now? I haven't touched the file in months.

Maybe you are looking for