Gap between lcd and digitiser
Any one find the gap between ipad air lcd and digitiser annoying? I mean it could be better if they were one. Sometimes when tapping a little hard on th screen makes sound as if ita hollow inside.
I never noticed it before, but yeah it has a larger gap on the right side than on the left...
But hey, I look at the screen not at the gap. I'm happy to have an anti-glare IPS screen.
| X220 i7-2620M | 12.5" IPS | Intel 520 Series 180GB Main SSD | Mushkin 120GB mSATA SSD | 8GB RAM | Intel 6205 WiFi | BT | Win7 Pro 64 SP1 |
Similar Messages
-
two days before my iphone 5 battery was expand and display screen came out and now there has some gap between frame and display.so how it will happen and i already got before months.now i need to backup all the data to icloud before through out.
https://www.dropbox.com/home/iphone
https://www.dropbox.com/home/iphonehttps://www.dropbox.com/home/iphoneMake an appointment at the genius bar of your local Apple Store. The phone has a 1 year warranty. If it's no longer under warranty, a replacement is $269.
-
Gap between frame and lcd (X220)
I just received my x220 today, however I found there are gaps between the frame and the lcd.
1mm for the left side
2mm for the right side
Is it normal?
Link to picture
Link to picture
Link to picture
Link to picture
right
Link to picture
Link to picture
Link to picture
Link to picture
excellent built quality!
Link to picture
Link to picture
the left side is okay, since it's just 1mm, but the right side is really unacceptable (2mm), it is very annoying
Can I ask for an exchange?
Thanks
Moderator note; picture(s) totalling >50K converted to link(s) Forum RulesI never noticed it before, but yeah it has a larger gap on the right side than on the left...
But hey, I look at the screen not at the gap. I'm happy to have an anti-glare IPS screen.
| X220 i7-2620M | 12.5" IPS | Intel 520 Series 180GB Main SSD | Mushkin 120GB mSATA SSD | 8GB RAM | Intel 6205 WiFi | BT | Win7 Pro 64 SP1 | -
Formation of moisture between LCD and front panel in a iMac
Hi Guys
I am using a 21,5" iMac for the last 18 months or so. Every monsoon (which is pretty heavy in Bombay) I face a strange problem. A few minutes after starting the mac, moisture starts accumulating between the LCD panel and the front glass which covers it. I have complained to Apple several times but there is no satisfactory reply. In fact one of their service center girls sent me this email explaining the reasons behind this problem
Hi , Sir !
Greetings of the day ............
This is with regards of ongoing problem with your iMac display issue.
I have understand it from the technician who have visited your place regarding this issue.Pls correct me ,if your imac display issue is different than belows.
Problem Reported: u see Some fog/condensation forms in that middle or corner of the screen(behind the glass). computer, But after turning it ON a large spot is clearly visible. [Deepak J] Your understanding is Correct .After turning of the computer, The fog disappears in just about 20 or 30 minutes.[Deepak J] No its not correct that fog/condensation goes in 20 or 30 minutes rather it takes more than 8 to 10 hours to get disappear and nature of the problem is intermittent. This is an environmental issue that happens with most of the iMacs here in mumbai during monsoon.it is because of humidity/moisture in the air.mostly it happens if there is a open window right behind the iMac or imac is very close to the AC.[Deepak J] My early PC which I used for more than 5 Years was also kept in the same way / environment in which iMac is Kept & I bought iMac for 4 times more than the Cost I purchased my Old PC.
Since the iMac goes Glass > Space > LCD it wouldn't be totally surprising that condensation would show up there if there is a lot of humidity and the temp variations between the outside of the glass and the inside of the glass.
The space between the glass and lcd is not air tight. The glass is just a "cover" and not affixed to the actual LCD. It's held on by some magnets but there's still air going to and from between the lcd and the section that connects to the glass. It's like when you get condensation/ie., fogged windows in a car. The temp difference the air outside the glass and the air inside the glass as well as both surface sides it's a matter of physics that a fog will appear if the conditions are optimal.
So,only few below things can help u in this case.
1.Keep the iMac On,as much u can.we can keep the system in sleep all the time with energy saver settings.we will help u to do the same.[Deepak J] I use PC for Max to Max 2 to 4 hours in a Week so are you suggesting that I keep the PC on for rest of 160 Hours
2.use of de-humidifier will might help.[Deepak J] Can you please tell me what is de-humidifier ?
3.Removing the glass panel(But not advisable.)[Deepak J] I don’t want to do that
Trust me ,it happens only in rainy seasons where humidity level is very high in our city and there is no technical solution to fix this as imac is design that way.[Deepak J] This the First rainy season after I purchased iMac
Hope,the above information will help u.
Pls let me know ,if u need any more information from our side.--
Thanks & Regards,
Rupali Mandve
Admin Asst.
For
Unicorn Infosolutions Pvt. Ltd.
301, Kotia Nirman, New Link Road
Andheri (W), Mumbai - 400053
Tel: +91-22-67354000
Mobile :- 9769276811
[email protected]
www.uipl.co.in
Its pretty obvious from this email that they have no clue on how to solve this problem. Combined with the fact that Lion has a lot of bugs, my impression is "Apple is the new Microsoft".
whats your experience guys
best regards
TejashHi Shilpa
Its not the lack of testing. I am sure moisture is a problem in many other parts of the world. More irritating are the 'suggestions' by so called apple experts.
One solution could be to seal it from all sides. Should be a pretty standard job.
best regards
Tejash R Majmudar -
How to maintain gap between table and graph in a report
HI,
I have a report in which a graph is placed below a table and data in the table gets increased with time , then how to maintain the gap as constant between table and the graph ?? Like i have 50 rows in a table and then next day 10 rows are added but then i want maintain same gap between the table and graph???>Right click on chart.
>Open the property and go to the relative position.
>Select the distance of the upper left point of the chart in relation to another report element by entering - the number of pixels; the part of the tavfrom which youble want to measure the pixels (in the first drop-down list); the report element from which you want to measure the pixels (in the second drop-down list).
>Repeat this for the distance of the lower left point of the chart.
Hope this will help you out. -
How to decrease the gap between label and input field.. pls respnd
hi friends,
I am facing this problem since long time and couldnt get any solution...
pls respnd,
i need to decrease the gap between my input field and label.. its very much gap there..
thanks in very advacne,
nirajaHi WD ABAP,
i am doing the same, created tcontainer, and just binded my node. i given matrix layout. But i dont know why it is coming like that.
Also WDABAP, could you pls reply me to the other thread,
about when im trying to read the dropdown value of subnode, the get_static_attribute or create_element method is going into my supplyfunction.
supplyfunction - my code is to fill the dropdown. and due to this supply function triggering,
my get_static_att or create_element is not reruting currenct row dropdown value.
what am i doing wrong.. can u pls pls.. its kicking me. i have spent my whole weekend on this, but couldnt solve this.
plsfnds :(((((
Niraja -
Gap between header and content in IE
Hello All
I subscribed to a post with this basic same question but I
never got a notification if it got answered or not
I all of a sudden have a gap between the header and content
on this site
http://www.michaelsondesign.com/guestVision/
- I am not sure why , it started when I added to the menu on the
left
Any ideas?
Thanks
RobAdd this to your CSS
img {vertical-align:top;}
You cannot lose until you give up !!!
"BOC_RUSH" <[email protected]> wrote in
message
news:fsn546$nrm$[email protected]..
> Hello All
>
> I subscribed to a post with this basic same question but
I never got a
> notification if it got answered or not
>
> I all of a sudden have a gap between the header and
content on this site
>
http://www.michaelsondesign.com/guestVision/
- I am not sure why , it
> started
> when I added to the menu on the left
>
> Any ideas?
>
> Thanks
>
> Rob
>
> -
Published site has huge gap between content and footer
So i have just published my site and when i look at it after being published i have a good 2 inch gap between the bottom of the content and the footer.
I have read up on a number of bits and pieces and they say you mauy have a hidden container on the pages, which i totally accepted so i searched and nothing. I then thought it might be a issue with the master page i was using, so checked that. Couldnt see it.
However when i looked through my site and saw the master pages i used i had a mix and some worked and some didnt. Im lost!!!
I launch on Sat and its a bit of a pain. Has anyone had this issue? The preivew looks fine, so im not sure where this gap is coming from.
Thanks in advance!When Sticky Footer is checked, the footer will stick to the bottom of the browser window unless the page is taller than the browser window.
Glad that I could be of help.
Regards,
Sachin -
Keeping a Consitent Gap between Content and Footer.
Hi !
I spent a couple of days trying to solve how to regulate the space between body and footer on a MUSE-project. I think it‘s worth dropping a few line for humankind.
We’re on a master-page. Let’s say our standard page has the following properties:
The Footer-marker is set to y: 500 px
The Bottom_of_Page-marker is set to y: 650 px
The Bottom_of_Browser-marker is set to y: 680 px
These settings mean, you have 150 px height-space for the Footer, starting from y: 500 px.
If you require more space for the Footer, it’s the Bottom_of_Page-marker you’ll have to drag down ( not the Footer-marker ! ).
If you’d like to add a gap, so your Footer is not directly sticking to the Content of the page anymore, but you’d rather like to preserve some space between both, you’ll have to drag down only your Footer-elements a little bit, e. g. down to y: 520 px. So, in a way, the 20 px gap created is part of the Footer. No changes must occur to the Footer-marker, at least for this reason. You’ll only eventually drag the Bottom_of_Page-marker down, in case Gap-height + Footer-height require more space than already available (depending on your figures).
Cheers
GSanjit, I didn't make any changes to the master at all. It was fine online, then I opened it to make a small type change and it was like this, and I can't get it back to where it was.
I tried adjusting the footer, but the slideshow is not on the home master page, just the bottom brown part and the type in it.
I don't know what could have caused it to change from before to now? I haven't touched the file in months. -
Removing gaps between content and footer/ content and header
I've been looking all around the internet for some solution, and it's probably a simple one.
But it's making me want to throw a brick through a window.
How the hell do I make that gap (pointed to in red) disappear so that my footer image is seamless with my content background?Remove the bottom margin from your paragraph?
p { margin:0; padding:0;}
Or change the spacing to before so you still get gaps between paragraphs
p {margin-top:10px; padding:0;} -
Yet another gap between sidebar and header
Hi there,
I'm just getting started with DW and am catching up on html.
Starting to build
www.thinkingtoys.com.au
and am bugged by the gap between the header and the sidebar.
Scanned the numerous gap issues here to no obvious avail and
this gap occurs in both FF and IE7 so is probably universal.
I'm probably missing something obvious but would be really
grateful if someone could point it out - I want the sidebar to be
directly below the header with no gap.
Thanks for any help,
PaulChange this -
<p align="right">Thinking Toys Club Member Login
</p>
to this -
<p align="right" style="margin-bottom:0;">Thinking
Toys Club Member
Login </p>
and see what happens.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"PWhipp" <[email protected]> wrote in
message
news:fiu56f$r3q$[email protected]..
> Hi there,
>
> I'm just getting started with DW and am catching up on
html. Starting to
> build
>
http://www.thinkingtoys.com.au
and am bugged by the gap between the
> header and
> the sidebar.
>
> Scanned the numerous gap issues here to no obvious avail
and this gap
> occurs
> in both FF and IE7 so is probably universal.
>
> I'm probably missing something obvious but would be
really grateful if
> someone
> could point it out - I want the sidebar to be directly
below the header
> with no
> gap.
>
> Thanks for any help,
> Paul
> -
Gap between masthead and toolarea
Hi All,
I am facing a problem of white space( a gap) between the masthead and toolarea when i open the anonymous page which has been customised but when the same page is opened in the preview it appears to be perfect.
i have checked the jsp files of masthead and toolarea but it does not have any Margin attribute such as: topmargin="0" rightmargin="0" leftmargin="0" marginwidth="0" marginheight="0".
can anyone help me on the same.
Thanks,
GunjanHi,
Try to change the Theme of this Desktop, may be there is a mis-configuration in the Theme itself.
Check also this for similar problems with themes:
TLN overlaps with Masthead
Greetings,
Praveen Gudapati
p.s. Points are always welcome for helpful answers -
Gap between bookmarks and side of screen
http://img851.imageshack.us/img851/2648/screenshot20110311at842.png
Whats with the gap between the icon and the side? And is there any way to get rid of the text next to the bookmarks icon?See
http://discussions.apple.com/message.jspa?messageID=1625651
and
http://forums.macosxhints.com/showthread.php?t=66545
I'd open Font Book, highlight all fonts with a little grey dot next to them, and then Edit/Resolve.
-fred -
Gap between screen and bezel should i take it back to apple?
Theres a noticable between the screen and the metal bezel, its currently working fine but i dont want the screen to die or the inside to collect up dust over the years. I only recently purchased the red nano and want this to last for a long while. Is it worth it to bring back to the apple store to get this replaced or are all nanos like this with a gap between the screen and bezel (just towards the bottom of the screen only) thank
You are very welcome, and good luck getting this resolved. Things like damage and scratches have been brought up on here by users in the past with devices and Apple has been pretty good about dealing with the issues.
-
White gaps between regular and video slides
I have just created an adobe captivate video. There is a white gap between regular slides and animation slides. It usually lasts for about 2 seconds. Because of this my audio and video are no longer synced. This gradually gets worse as the presentation continues. Does anybody know how to get rid of these white gaps? I'm using version 3. The issue is demonstrated in the following video:
http://screencast.com/t/hqczdmV69b9
Thanks in advance.It looks like they go all the way to the end of the slide. It is happening somewhere between slide 7 and slide 8 (see attached screen shots). Thanks again Rod.
Maybe you are looking for
-
The on-off switch is the only way I can turn off the computer, because the screen is black. Then I turn on the computer again to reboot, and when I click on Firefox again it takes from 30 to 90 seconds before Firefox opens, at which point I get a mes
-
RDB, Oracle 9i and Materialised Views
Hi all, I have a RDB 7.1.5.9.1 and an Oracle 9.0.1.4.0 database and the data from the RDB has to be available for queries in Oracle Discoverer. There is a 1Gb (fixed) line between the databases. I have created a database link and that is working fine
-
Hi, In J1ID transaction, when we create a new chapter id system asks for transport request to be saved in. Since, this transction J1id will be used by the end user for maintaing the excise relevant details for customer, vendor, material, etc... we ca
-
Reading access to System Configuration
Hi, we need a role for developer which can perform only read-access to all tasks of Workset "System Administration". I have created a role and I have added workset "System Administration" (Portal Content --> Content Provided by SAP --> Admin Content
-
Good Morning Everyone, My Imac booted this morning to a black screen saying: Darwin/BSD prompte me to put my user name and password which I did, then gave me another prompt! I typed "exit" and it seemed to want to boot to the desktop but it came ritg