Gap between stainless band and the glass

Hi
My new iPhone 4 has a gap between the stainless band and front glass. Where the headphone jack is. The gap is around 0.5 mm and I can stick a paper in there. Is this normal?
I'm thinking of returning my iPhone and get a replacement if possible.

I've pretty much got the same thing. All four corners of my back glass have the slightest of a gap. You can really only see it when held up to a bright light. I can only slip receipt paper in there. Regular paper is too thick. I've had the phone a little over a week now and it's a week 41 build. I've considered exchanging it (the home button also isn't quite flush) but everything works and nothing seems to glitch so I'm leery of getting one with a worse problem. I've still got a couple weeks to exchange for new so I'll see what happens. Far as the slight gap being normal, probably not, but many seem to have it. If it gets any bigger it's going back for sure.

Similar Messages

Hairline gap between steel band and upper glass

i purchased iphone 4 5 days ago and i noticed a slight hairline gap on top and bottom and on right hand side (screen facing me) . i was abble to insert a paper inside the gaps. gap is sometimes noticable. as my phone is new im worried that dust might get inside gradually. Will apple service centre replace my phone with a new one (not a refurbished one) ??

So are they gonna replace with a new or refurbished one! and does this problem even worth taking my phone to service centre? im afraid that the new phone they're gonna give me might have some other defects!
http://i.imgur.com/7BBSa2X.jpg
http://i.imgur.com/zc4KMvT.jpg
@BRAD805 please reply

Charts: Gap between Vertical Axis and the chart area

Friends,
I have a really wierd issue and I am sure I am doing
something wrong.
I am trying to align 2 charts that are placed vertically. I
want to align the left vertical axis and the gridlines within them.
Aligning the left vertical axis is easy and done but aligning the
grids is becoming challenging and I have already spent a few hours
on this problem.
Here is a wrong chart image ...
Wrong
chart image
The line of the LineChart (in the top chart) is touching the
left and right edges where as the bottom chart bars do not touch
the left/right edges. Due to this the gridlines are not aligned.
I had managed to solve this problem but I am not sure what
part of the code solved the problem. Here is the right chart image:
Right
chart image
In this chart, the line of the linechart (in the top chart)
is not touching the left and right boundary hence the gridlines are
alignd with each other.
I wonder what property of the chart controls the series
touching the left/right vertical axis or boundary. Your help is
appreciated.
Thanks

here is some more information ...
I started changing some of the properties of the chart which
I mentioned is a RIGHT CHART and this is what I learnt ...
It was a CartesianChart hence it was creating the gap
between the left/right vertical axis and the actual chart area
(refer to the right chart image).
I changed it to a LineChart and it started behaving like the
chart in the WRONG CHART image.
Is there a solution to this problem?

Bmpanel creates a black gap between my wallpaper and the panel

I am running Xcompmgr (as you can see by the window shadows) and PekWM. bmpanel is compiled with compositing support (0.9.x, couldn't get bmpanel2 to compile). But whenever I start bmpanel, my wallpaper moves up to make room and leaves a black space. This does not happen with simpler bmpanel themes that don't have pieces extending off the panel.
As you can see in the screenshot, I'm looking at a screenshot of someone else who has managed to get it working correctly. No clue how, though. The screenshot also contains the CLI feedback.
I'm setting the wallpaper with feh --bg-scale, do I need to use something else? Running feh again after bmpanel doesn't change anything.
Thanks!

Ranguvar wrote:
http://h.imagehost.org/t/0515/2009-08-0 … _scrot.jpg
I am running Xcompmgr (as you can see by the window shadows) and PekWM. bmpanel is compiled with compositing support (0.9.x, couldn't get bmpanel2 to compile). But whenever I start bmpanel, my wallpaper moves up to make room and leaves a black space. This does not happen with simpler bmpanel themes that don't have pieces extending off the panel.
As you can see in the screenshot, I'm looking at a screenshot of someone else who has managed to get it working correctly. No clue how, though. The screenshot also contains the CLI feedback.
I'm setting the wallpaper with feh --bg-scale, do I need to use something else? Running feh again after bmpanel doesn't change anything.
Thanks!
I hadte same issue, i wanted that bmpanel theme, and a trayer, but i couldnt use both, so i stoped using bmpanel, im hoping that they will be able to use compozing and have a trayer at the same time, then i will start using it again

Why there are fog between the display and the glass?

Something weird happened to my iMac. I think there is a gap between the display and the glass at the front, right? Today I found some "fog" on the inner part of the glass. I think there are some water vapor in the gap and it condense to form some fog on the glass. I once tried to used a Hairdryer and blew some worm air on to the glass at the front. It works, the fog disappeared. However, after a while, the fog appears again! What can I do????

According to one Mac genius I spoke with, the cleaning kit is used by repair techs at the Apple Store. Not sure if they sell it since the inside of the glass display is not user-serviceable. The kit I was told has, among other items, a plastic film that peels off the last bit of debris from inside the glass. Check out this video. http://www.youtube.com/watch?v=frfzESC-ahM

What's the difference between Dual Band and Simultaneous Dual Band?

I just wondered what the difference between Dual Band and Simultaneous Dual Band was?

Nevermind, I know now!

On differences between JavaFX CSS and the w3c standard css

This is a discussion topic which came to mind after reading comments in this thread Re: FXML, css and -fx-font-family
Feel free to comment or share your thoughts on the topic.
Note that these comments relate to the naming and semantic meanings of css tags, and not the syntax and parsing of css (as both w3c css and javaFX css seem to be equivalent in the later regard).
You know, sometimes I find JavaFX's lack of certain css features refreshing. It is nice to have all, well, almost all, of the JavaFX CSS documented on one page. I think if you were to do the same thing for w3c css then it would end up with a much larger, more difficult to understand document and even what the contents of that document should be would probably be pretty controversial, in the same kind of way that the HTML5 specification ended up being. Microsoft contributed over 7000 tests to w3c just to cover only a subset of the css rules available in browsers today. The webkit project lists almost a thousand open CSS bugs: https://bugs.webkit.org/buglist.cgi?product=WebKit&component=CSS&resolution=---. So implementing even partial w3c CSS support is a complex project.
When I first started using JavaFX CSS I found the differences to w3c CSS quite jarring, and it was hard to account for them. Now that I am used to JavaFX CSS, I don't have as much of an issue. The difference in names and semantics is going to be an impediment to designers working on JavaFX who are familar with w3c CSS - but the designers will quickly also discover that FXML is not HTML and Java is not JavaScript and JavaFX deployment is not HTML deployment. So, perhaps, in the larger picture, it is not as big a deal as it would seem. Still, one can't help think that any impediment to people easily picking up and adopting JavaFX is doing the technology a disservice.
There are other advantages in having the JavaFX CSS in it's own namespace to w3c css, in that it can evolve seperately, it is not expected to be exactly the same because it has a different name, it is not expected to fully implement w3c css as browsers do because it's clearly a different thing by name, etc. There is even precedent for it in the use by mozilla of moz- CSS prefixes and webkit css properties http://css-infos.net/properties/webkit - the web as not as standard as a lot of people propose. JavaFX CSS is backing a JavaFX rendering engine and not an HTML rendering engine. It is quite remarkable that Oracle was able to build and make available a CSS model for JavaFX that feels as familar as it does to w3c css, as w3c css is targeted very strongly toward styling a completely different technology set (HTML markup and document object model).
It would be useful to have a tool which translates w3c css to approximations of JavaFX css and vice versa, or the ability for JavaFX to have a mode (perhaps a boolean value when a stylesheet is loaded) to perform an automatic alias or mapping of w3c css to javafx (at least for the subset of w3c css which would make sense to automatically translate to JavaFX css). I haven't checked the JavaFX jira in detail, so perhaps a request for such support already exists - perhaps it is under the private http://javafx-jira.kenai.com/browse/RT-9272 jira.
The JavaFX css model is really powerful and I have found really useful some of the additions that it adds above the baseline 2.1 css that is found consistently in browsers. With the upcoming Java CSS object model http://javafx-jira.kenai.com/browse/RT-17293, you will also get better programmatic access from Java.
So, nice work on building and implementing this complex feature . . .

Thanks for the feedback. Closing the gap between JavaFX CSS and W3C CSS will be an evolutionary process. It would be nice to use a standard's based stylesheet but there is not always a 1-1 mapping to JavaFX. But for those properties that can be mapped, it is something that should be supported. For example, we should be able to handle "font" or "-fx-font".
I have made http://javafx-jira.kenai.com/browse/RT-9272 public.

TS3274 I have an iPad 2 that was dropped and the glass broke.

I have an iPad 2 that was dropped and the glass broke around Christmas break. I took it to a local computer repair company and they changed the glass. However, ever since that time I have had some problems with the wifi. I do not have the range I once had? For example I can walk out of the room that my verizon jetpack is in and loose connection. I have also had issues with my Keynote presentations loosing connectivity to Apple TV through the blue tooth. Q What are my options beside getting a new iPad?

Some iPad users have been able to revive their dropped iPad. Turn the iPad over and give it a HARD SLAP on the back. May take several slaps.
dropped iPad
https://discussions.apple.com/thread/4474708?tstart=30
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

MSOutlook HTML newsletter issues - large gaps between large images and small gaps...

Please can you help me!
Searched the web & found plently of advice but still getting formatting display issue when viewing HTML newsletter in MS Outlook.
Fully aware on the basics regarding the multiple issues when creating HTML newsletters but this is driving me crazy.
Apparently there is a image height limit within Outlook (can't find out what this is) so I have sliced my larger images into 5/6 parts which solves the display issue in Outlook.
But the gaps between the slices are now being displayed as small blank spaces within Hotmail.
I did use <br> between each slice as without caused the fixed 600px wide containing table to expand due to the slices stacking hoz.
Also still getting small gaps (like <br> spaces) between all images in Outlook when displaying perfectly (no gaps) in a browser.
This is my newsletter displaying correctly via a browser:
http://eu.shorts.tv/site-admin/modules/mod_mail/SHORTSTV_DECEMBER_2012.htm
Using Dreamweaver 4 (do have the latest version via Adobe Creative Cloud Membership but not on this system).
Hope you can help
Many thanks

Many thanks David
I also found this article which is currently sitting on my desk.
Pdf would make perfect sense or even a url link to view via a browser but these guys need it contained within the email.
Thanks again for your kind advice.
Regards
ShortsTV
Date: Fri, 30 Nov 2012 18:05:08 -0700
From: [email protected]
To: [email protected]
Subject: MSOutlook HTML newsletter issues - large gaps between large images and small gaps...
    Re: MSOutlook HTML newsletter issues - large gaps between large images and small gaps...
    created by David__B in Adobe Creative Cloud - View the full discussion
Hey Shortstv, Not something I know much about, searched and found thishttp://robcubbon.com/create-html-email-newsletters-outlook/ Maybe create it as a PDF attachment instead? -Dave
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4888255#4888255
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4888255#4888255
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4888255#4888255. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Creative Cloud by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV?

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV? I have a MiniDisplay Port to VGA adapter, but there are two issues with it: The new display doesn't have a VGA port, and even if it did, I wouldn't want to have my mac constantly attached to the display by a cable. I was looking for a way to use the TV as a display without any wires. Is there some type of bluetooth setup I could use? Please let me know if you have any suggestions.

As I wrote above, I think you should look into the Apple TV yourself. The best place to find information about what it can and can't do and to ask your own specific questions is probably in the Apple TV forum, here:
https://discussions.apple.com/community/appletv/appletv

Data reconciliation between R/3 and the BW Systems

How do we do data reconciliation between R/3 and the BW system for the following areas?
Purchasing
Controlling:
Project System:
COPA
SD
AP
Trgards,
Tony G

Tony
Have you looked these documents??
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/how%20to%20validate%20infocube%20data%20by%20comparing%20it%20with%20psa%20data
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7a5ee147-0501-0010-0a9d-f7abcba36b14
Re: BW v. R/3 data reconciliation
Hope this helps
Thanks
Sat

"USB device not recognized." "The connection between your device and the desktop could not be established. Please check your setup and try again." Tungsten E2, Outlook 2007

Hi,
I am running XP SP 2, on a Dell Vostro 1000, Palm OS Garnet v5.4.7 on a Tungsten E2. I have worked though issues relating to synchronization, Outlook 2007, Docs to Go, etc., in the past. Thank you board members!
Once I worked thru all the initial problems, my Tungsten E2 was sync' ing beautifully to my laptop until a few days ago. There have been no changes (I know of) to the configuration, but now I receive "The connection between your device and the desktop could not be established. Please check your setup and try again." On the laptop I sometimes get "USB device not recognized." I am unclear why I get the PC message sometimes and not others.
I have tried the following: (not necc exactly in this order)
Double checked Hot Sync Mgr settings: Local USB (ver. 6.0.1)
Reset the Palm (multiple times)
Rebooted the laptop (multiple times before and after the Palm resets)
Went to Support Libraries including http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=57,E=0000000001060189973,K=9550,Sxi=3,Case=Obj(3695...)
and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(1409)
Followed the steps in "Start Here" found at http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=26057
Moved Backup directory as per a post on this forum
Looked for a deleted a file called "Graffiti_ShortCuts_____________" per a post on this forum
Followed the steps in HotSync troubleshooter guide you can run through located on
http://kb.palm.com
Went into Device Manager - found it shows no yellow ! 's
Followed Device Mgr Troubleshooter - went all the way thru with no solution
Tried all four USB ports - the PC's bell-like tone does not sound when I disconnect or reconnect the Plam's cradle like it does when I conn/disconnect other USB devices -I think that is a clue. ...?
Cleaned the Palm's contacts (and cradle's contacts with a old, dry toothbrush)
Read all the posts under "USB device not recognized."
OK, I'm at a loss, can anyone help me? Many thanks in advance!
~Bob
Post relates to: Tungsten E2

Hello!
Using a cradle with the Tungsten E2? Tried bypassing the cradle and just use the hotsync cable? Tried a different computer yet? Somehow, the PC is having problems getting a signal from the device. I assume you have the laptop charger plugged into the laptop during this? Not going through a docking station or port-replicator.
One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop. This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time. Keep me posted.
Post relates to: Treo 650 (Unlocked GSM)

What's the difference between Java SDK and the Enterprise Edition?

What's the difference between Java SDK and the Enterprise Edition? Are they both free?

both r free but they are used in diffrent applications. sdk are used for simple apps that run on your computer while j2e (enterprise edition) are ment for large distributed computer systems that include servers and such. if you don't know the diffrence you probably wont need the the j2e, only the sdk.

Customise table inconsistency between ABAP Dictionary and the databas

Hi all,
I have encountered a problem where by, I was not able to activate a table due to inconsistency between ABAP Dictionary and the database.
After I run the SE14--> Check Database object. It has show that there is a missing Unique Index(Primary Index) at the Database Level, but at ABAP Dictionary it is there.
I have try to recreate the primary index at the Database level, but failed. Because one of the primary key field is been dropped from this table.
So now, may I know how can I still make this table Active again?
Is it save to folllow the following solution that I found on internet?
Syntax error in SDCC, table inconsistency between ABAP Dictionary and the database, transport error 8 during the generation of ABAP Dictionary. When you call Transaction SDCC, a termination occurs due to a putative syntax error because a table is not known or active. When you check this with the ABAP dictionary (SE11), you notice, that the table is active or inactive, however it is not possible to activate it. The activation might terminate with the error message 'Inconsistency between ABAP Dictionary and database'. A check of the affected object also delivers this error.
Solution
Proceed as follows:
Log on as user DDIC
Call Transaction SE14
Enter the affected table name and
select EDIT
In the following screen, choose Table -> Reconstruct
Confirm the execution
Call Transaction SE11
Enter the affected table name
Display
Activate
Thanks.
CK

I managed to solved this by
Solution
Proceed as follows:
Log on as user DDIC
Call Transaction SE14
Enter the affected table name and
select EDIT
In the following screen, choose Table -> Reconstruct
Confirm the execution
Call Transaction SE11
Enter the affected table name
Display
Activate
Thanks.
CK

My bran new 4 day old IPod Touch 32GB just slipped onto my table and the glass on front has cracked bad - how do I get this fixed?

Hello
My New 4 day old IPod Touch 32 GB just slipped onto my kitchen table and the glass cracked - is it still under any warranty and how much will it cost to repair?

Accidental damage is not covered under the limited manufacturer's warranty, which is a year from the purchase date.
If you live near an Apple store, make an appointment.

Gap between stainless band and the glass

Similar Messages

Maybe you are looking for