Gapless Computing Freezes my system

I downloaded iTunes 7 just fine and it installed without a hitch. It even started up properly. After that, though...
I booted it up to the usual hullabaloo and it promptly started churning its way through calculating the gapless play feature. Since I have over 11,000 files in my system I walk away for a bit. When I came back later, it had frozen at song 112 and any attempt to do anything made my computer lock up. I tried zapping that file and it then started to freeze at song 111. I reinstated the file, re-installed iT7, uninstalled and reinstalled... **** near every combination you can imagine, but it all came to the same freezing point.
I am currently trying to re-install 6.0.5, but now I have to recreate my library, podcasts, etc etc...
Any suggestions?

If I reinstall 6 will I lose my ratings/playlists/playcounts etc?
Yes, BUT you can recover them. There should be a file called ITunes Library.itl Search for that and somewhere within the folder that file resides there ought to be a folder of old library files, including the one that was abandoned when you upgraded (HA!) to iT7. Put that in the previous folder, rename it to take the place of the old file and it should all come back, right as rain.

Similar Messages

Programs keep not responding, computer freezes often, apple mail won't open

Starting yesterday my computer has been running very slowly. it takes almost 15 minutes to start up and then programs won't open or will quit unexpectedly or not respond. Not to mention that my computer freezes every 30 seconds or so. I have 4gb of crucial ram that system diagnostics say is ok. i don't know what is wrong.

Have you tried opening Mail from the Applications folder. The Dock alias may be corrupt.
Try a restart.
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode - Mavericks
Safe Mode - About

Has anyone experienced there computer freezing up when useing Photoshop CS4 or SC5

My two computers both freeze up when I am useing Photoshop (working with a large file 82-120 megs with multiple layers, channels and paths) it only ocurred when useing Photoshop. Otherwise the computrs works fine for every day tasks for buseniss and personal use, admittedly, I do not have any other resource intnsive applications other then QuickBooks or maybe a large Excel spreadsheet but I have no problem with these large files. I am not a gamer or I could try a game I hear that they can be resorce intensive.
My first computer is used for personal and business. this computer has a number of programs on it, including Kaspersky internet security but it is not lacking in resorces, It is a Intel based computer, sporting Intel quad core 2.5 GHz CPU. running on a 32 bit Windows 7 operating system, its list of components are 4 gig ram, Nvidia Geforce 9600 GT graphics card (on the Adobe approval list sporting open GL) 4 sata hard drives, 750 watt power supply, Asus P5N-D SLI motherboard, the tower case has 7 fans and the CPU is water cooled.
I run Photoshop CS4 on this unit.
after I experienced this loss of critical files I call the tech support line to see if they could help with recovery of the file and to ask if they had a way to prevent this from occuring again.
They said that I could wave bye bye to the file and the work, additionaly they said if I was working with large files like that, I should be runing a 64 bit system that could utilize additional memory.
I really like working with the large files so I bit the bullet and spent the money for the 2nd computer that I would use as a dedicated Photoshop workstation.
the second system has many of the same components because they have worked admirably. the key difference is as followes. 8gig ram, 64 bit Windows 7 operating system, Photoshop CS5 and the only other software is the drivers for the wacom intos4 tablet. I desided not to install any type of antivirus program because I will not be useing it on the internet except when it needs to connect to Adobe for whatever. my decision not to install antivirus can be reversed but I did not want any questions about it slowing up the computer.
This system with Photoshop CS5, freezes up faster then the CS4 system.
When I say Freezes up what I am referring to is the mouse and keyboard will not respond. Control/alt/delete will not bring up the task manager. Eventually I give up and have to force a shut down by pushing and holding the case start button for about 5 to 8 seconds.
when I restart the system I check the file that I have been working and several times the file that I was working on is corrupted beyond Photoshops ability to open.
I have used the windows 7, on board, memory diagnostics and it claims that all of the memory is fine I have reviewed the event logs and the only critacal errors are about the system being improperly shuting down. I even went to the trouble to click on the link for each error that will take you to Microsofts website and will serch for anything they have about that event and they had no help on the event.
People with mac computers have had a similar problem that had to do with there fonts and plugins, but I do not have a mac and I have not installed any plugins. The CS5 is as it came from the factory and the Mac people kicked me out telling me to get over on my side of the street where the rest of the windows outcast are but that was only after they thought they had there problen solved. Its so funny, but losing these files is not, Please Help

Thanks everyone for jumping in with both feet.
Let me review what I have already done.
(1). I have already witnessed how the wround driver for the tablet will wrack havoc. when I first started the 64 bit version of CS5 it would not recognize any PSD files at all and if you went to the file and right clicked looking for the (open with) dialog box forget-about-it the option for Photoshop was not an option.
I called Adobe tech support and they told me that I was not going to be able to use the Wacom tablet with the 64 bit versionof Photoshop. I found that a little suspicious seeing how Wacom tablets are the most preferred pen tablets for professional illustrators.
I contacted Wacom and they explained that I needed to uninstall the Wacom tablet, reboot the computer, go to the website, download the new 64 bit drivers and then reinstall the tablet. after I did that. Photoshop found all of my files and opened just fine.It was only then that I found out about the freezing proplem with the 64 Bit version.
A number of the helpful people here have tried to advise this to me but I have already be down tha road.
(2). I have the latest drivers for the BFG Nvidia Geforce 9600 Gt, released in April of this year and I had already new that the were necessary for the open GL so this is one of the first things that I tried.
Some one from our cousin Mac's side of the famaly and (Noel just suggested) that I try turning off the open GL. As soon as cousin Mac asked us to try this I did it (Them being famaly and all).
I was able to give it a try on the 32 bit system on Thursday 7/8/2010.
I was able to work on a very large file with a multitude of layers, channels and paths for about 5 hours before if froze. after the reboot I found that the file was fine and retained everything up to my last save.
But this test is only good as circumstantial evidence because the freezes are somwhat random. They mosly happen after I have been working with a large file for quite some time but some times it can happen very quickly, maybe 25 or 30 minutes.
Bye the way I really enjoy the humor, the Mac people are very serious people.
the Mac users are just grouchy because they expect their computers to "just work", and of course they don't.
We PC users have been given no such expecatations. THANKS NOEL
Oh, don't worry about them mean old grumpy PC wanna be Mac peoples. Gota luv it THANKS dec9
and Eight thousand dollar papper weight says it all. THANKS $8000paperweight.
(3) the memory, CPU and mother board can not be ruled out completly, just yet
As for the memory I have used the on board windows 7 diagnostics and it passed. but this is a unreliable test for hevy-resource dependent applications and a load or stress test would need to be done to be confidend.
I have a number of computers with the same kind of ram but after swaping them around I can not say that I have had any lasting results and it is compecated by experiences like what happened to me after turning off the open GL. What if I had of only worked for 4 hours? I would of thought that the problem was solved thats what would of happened
Do any of you work with files like I have been talking about? and if so do you experience any problems?
The motherboard can not be rulled out by any tests that I know of other then process of elimination which is at the heart of all sound diagnostics.
I downloaded a utility that is helpful called (Cupid Z) that gives real time monitoring and idenification of components.All the voltages seem fine.A.
I hope I will be able to up load the screen shots so you all can have a look see.
The CPH is more than likely not the problem.
I do have the option to install Photoshop on a third computer that has most of the same components but has a different Intel CPU. this would rull out any compatability issues (CPU with the Board) but if that were the case I dought that every other progrem under the sun works fine except Photoshop.
dec9, I did delete the prefs on the 32bit system but I have not had time to test the operation of Photoshop as of yet.
Lastly I will try to upload the screen shots of (Cupid Z) you will see that the latencys and the frequency are correct. Under the SPDscreen the plausible timinigs for verious common frequencies are given,, all seem to be with in range. The lantency are inside the spec.given by Corsair;s website
Asus provides a utility that allows you to monitor Temptures and voltages and I hope to send you a screen shot of this and you can see that they all are correct.
I would like to send the event log but I am not sure how to do that if someone could give me the 411 on how to do this I will send them to you I have saved the errors in several file formats but I cant see how you cold read them on this little page Thanks again POBOX119 signing off

Why does my entire computer freeze while opening or using After Effects or Premiere Pro CS5?

Just built a computer to meet all requirements for Adobe, Autodesk 3ds Max, and UDK, for school.
Specs;
Motherboard - ASRock X79 Extreme 4-M, Socket 2011 - Micro ATX - 4 DDR3 1600/1333/1066/800 - 3 PCI-E 3.0 x 16 - 7.1 CH HD Audio - PCIE GLAN - 3 SATA3 - eSATA3 - 4 SATA2 - 4 USB 3.0 - 10 USB 2.0
Processor - Intel Core i7 Processor - i7-3820 LGA 2011
Processor fan - Intel Thermal Solution RTS2011 AC
RAM - Ballistix by Crucial - 2x 8GB Tactical PC3 - 12800 CL8 1.5 VW/XMP = 16GB RAM
SSD - Crucial M4 SSD 128GB - Comptatibility with 6Gb/s & backward compatible with SATA 3Gb/s
HDD - Seagate Barracuda 1TB - 7200 RPM up to 32mb cache
Power Supply - Cooler Master Extreme Power Plus 700W
Graphics Card - EVGA - NVIDIA GeForce GTX480 - DirectX11 - CUDA - OpenCL Support - PhysX Technology - OpenGL 4.1 (so says the box it came in; but if I'm not mistaken I think the command prompt had shown OpenGL 3 or 3.2)
Disc Driver - LG DVD/CD RW... It is an OEM, Windows claims it is updated.
I use an external component - USB Microsoft Wireless Mouse & Keyboard 2000.
I have, as far as software goes...
Windows 7 64-bit SP1
Adobe Creative Suite 5, student version or what have you.
- I do have several plugins installed as well for After Effects only.
Autodesk 3ds Max 2012
-I have several maxscripts as well as a couple plugins for 3ds Max.
UDK 2-2012 & 3-2012
NVIDIA PhysX Lab 1.1
NVIDIA Texture Tools 2
NVIDIA plugin for Photoshop
xNormal
ConTEXT
UnCodeX
Quicktime
AVG Free
Malwarebytes
7-Zip
Java
Sculptris
As for anything else giving me issues I haven't noticed anything besides a previous Graphics Card wasn't supported very well at all with 3ds Max, it would freeze while using the material editor which was fixed with replacing a GTX550 ti with a more compatible GTX480. Thought maybe the upgrade would also solve the fact that almost everytime I go to start up and/or use After Effects or Premiere Pro CS5 my whole system freezes. Whether or not I'm doing anything, it occasionally happened during "Scrubbing" the timeline, but also during the splash load up screen. Would take the time to wait for several minutes but nothing would change. Hard reboot was needed. After countless hours of searching online I stumbled upon what is called an "Unlock" for Premiere Pro/After Effects to allow accelerated GPU and CUDA cores. Simple procedure, seems as if things go faster... When it is working. But still, I encounter freezes on my entire system. It isn't a crash back to Windows or anytihng. Just a complete freeze on the entire system. I have not extensively used other Adobe programs besides Photoshop quite briefly just so I could open menus and force a freeze within 5 minutes and noticed nothing wrong. Which in AE & PP just running through any of the menu windows can quickly cause a sudden freeze.
note* I have alternated shutting off and turning on OpenGL as well as multiprocessing. Doesn't matter, it really doesn't seem to change much of anything.
Alas, I am absolutely sure, after checking and re-checking 80+ hours over the past 2 weeks that yes, everything is updated as far as each individual program, software or hardware will allow me to update them. I have reinstalled Windows as well as each program up to 3 times, and 1 system (restore?) I had Windows dump everything, started from scratch, backed up nothing. To reinstall everything from scratch, while not installed several "Utilities" or software components from stuff like the Motherboard and its XFAST USB/LAN or whatever, thinking maybe it was cluttering up anything.
Please, if anyone has any ideas upon this and could give me advice, whether you notice any other incompatibilities or anything. Any and all advice would be greatly appreciated. Thank you.
note* I do not have a wired Keyboard or mouse to disable the USB plugin and attempt that route.. at least not yet, its on my list of things to do. Also, I did run Memtest86+ during a boot and it claims that everything there had passed 100%. I am not "overclocking" anything either. I just wanted something I could work smoothly on, that would have decent rendering capabilities. I used to use my girls' laptop which was an HP with 3GB RAM and never experienced crashes or freezes and I could use AE, PPro, 3ds Max with some lag but not any issues. Rendering took forever on it, but I usually avoided that 'cuz it would start heating up pretty fierce. Saved my rendering for school computers where I could. But either way, now I have this expensive piece and it is getting frustrating that I cannot work on it.
note* Also, incase it does help, I have Windows as well as any major components installed onto the C: drive (aka SSD for my system) while all my secondary software, such as Adobe, Autodesk, etc. are all installed directly to my D: drive (or HDD) And everything is set up to go through Windows Firewall as well.

Thanks all. I have just tried a few things, installing them onto the C drive as you all specified as not being one of them. I can understand it, but at the same time i have a classmate who has their software on a seperate drive and it runs smoothe. I'm on my second GPU in 2 weeks, unless I have terrible luck it seems doubtful being that I can run games and a majority of the software no problem. Through further testing around with a corded mouse and keyboard I've noticed the following...
The computer freezes entirely only when I'm performing a "scrubbing" action or using a mouse. Left clicking, scrolling, or moving it around. Otherwise if I do not use the mouse and I make all my actions, such as "scrubbing" in AE via "Page Up & Down" keys, there's no freeze and it preloads the preview no problem.
"Scrubbing" does not load a preview (the green bar doesn't load at all while scrubbing). But, also noticed no matter how smoothe everything is running in 3ds Max as well as PPro, once I start performing a "scrubbing" action with whatever timeline I use, it will definately freeze my whole computer, Windows and all. Hard reboot is neeed.
With having gone through 2 GPU's, done a full memtest via Windows 7 and Memtest86+, there seems to be no issue with my memory or GPU. Like I said, I've run UDK without an issue. Whether the editor or game. The USB doesn't seem like it's the cause, I've used both wireless as well as wired keyboards/mouse. Still freezes, but now only when using a mouse to "Scrub".
Is it possible my motherboard could be incompatible somewhere? I mean, really.. everything is brand new but 2 weeks of troubleshooting.
And I do plan on trying to run my software off the C drive, I just wanted to make sure it wasn't something else, like I said, I've seen and used a computer where it all runs off the D drive and it runs perfectly, actually better on his computer than off the C drive at my schools. So if it is an issue would it lie within the fact that I'm using an Nvidia GPU? Considering my classmate is using a AMD/ATI Radeon or something like that.
Again, to those who replied, your shared knowledge is greatly appreciated, thank you.

ITunes and Computer freezes when ipod is connected

When I connect my video ipod to my computer (dell desktop) the system freezes, as in it will not respond to mouse clicks and keyboard (but can still get to task manager). When I unplug the ipod it comes back to life. Programs always freeze, but sometimes I am able to navigate within windows without it freezing, but as soon as a program is brought up, my computer falls to its knees.
I have the latest version of iTunes, and updater v. 1.1, (but I have not been able to update the firmware yet from v 1.0).
The odd thing is last night I was able to download several gigs worth of music to it without incident. I then tried to load movies (they were in the wrong format, but I didn't know it at the time), and so in an effort to correct that I uninstalled itunes, the ipod drivers, and the ipod updater programs several times.
I cannot update the ipod firmware because the computer freezes when the ipod is plugged in, so the program freezes as well. Kind of a catch 22 situation.
I have been over the forums and help archives for about an hour and a half now and I have come up dry.
Windows XP does recognize the ipod when the cable is connected, and the ipod flashes, "Do not disconnect", which it is supposed to do.
I suspect this is drivers/software, but I have no idea where to go from here.
Help?

Hey!
That EXACT thing happened to me! 2 nights ago I'm downloading like crazy, all is well. I got on LimeWire and downloaded some videos and tried to put them on my iPod. Imported them into iTunes then tried to put em on my iPod and it completely wiped out all my songs! So I get back on, put the songs back in, and about half way through the update the thing freezes. I've re-installed everything, and have reset my iPod. Did you figure out what to do? Maybe your fix will fix my problem, too.
Thank you!

Just done a fresh install of Snow Leopard with all updates,iMac 5.1 behaves strange, sometimes I start Google Chrome and look at youtube videos the computer freezes and shuts down immediately, I believe its related to overheating ?

Just done a replacement of the pata DVD drive (its new and is working ok), and a fresh clean install of Snow Leopard with all updates, iMac 5.1 behaves strange, sometimes I start Google Chrome and look at youtube videos the computer freezes and shuts down immediately,
I believe its related to overheating ?
iStat Pro shows GPU diode temp at 66 C, CPU at 48 C, Fan rpms is around 1000
Any ideas somebody ?
The hard disk has been previously checked with state of the art techniques that have confirmed that the hard disk drive is in perfect condition.

1.5-3 minute boot up as opposed to 15-20 seconds
And
why it takes a long time to load a lot of things.
I have restored this
from a time machine partition.
TimeMachine is only a backup and restore, it won't fix issues in software and according to your information, doesn't even optimize the restore for best performance on boot hard drives.
What you need to do to regain your speed is to understand how your machine works
Why is my computer slow?
Fix any and all issues in software following this list of fixes
..Step by Step to fix your Mac
Then follow this defrag method I've outlined
How to safely defrag a Mac's hard drive
Most commonly used backup methods
There shouldn't be need to reinstall OS X fresh unless your having file structure issues which if they are should appear when in the Steps, which then a zero erase and install will cure as well as any bad sector issues, the defrag step wouldn't be necessarry on a freshly installed system obviously as the files are written all together, not in portions all over the drive.
Hope this assists.

Computer freeze when updating from OS 9.2 to 10.2

Hi,
I have a grey/blue ibook 366Mhz purchased the summer of 2000. I'm trying to update to OS 10.2. So far, I've updated from 9.06 to 9.2.1 to 9.2.2 (the required sequence), updated the firmware to 4.1.7, and installed third party RAM. I bought the install discs (10.2)from ebay. They are white colored and should work, according to the help files, although the seller did not send me the third "tools" disk.
When I try to install 10.2, the computer freezes at startup. A grey screen with the apple logo appears, and then the screen freezes and splits.
The point of this upgrade is to use our Verizon internet service, which requires OS X. If there's a way around that requirement, it would be just as good.
Does this sound familiar to anyone. Thanks for any help you can offer,
Andrew

Andrew:
You apparently have an Upgrade Version, which requires that you have the previous version installed on the HDD. What you need is the Full Retail Version. Check the picture of the disks posted by ali brown by clicking here However, instead of upgrading to Jaguar, since you have to purchase new install disks anyway, I suggest that you consider upgrading to Panther, which is a lot more powerful and stable OS. Your computer will easily support Panther if it meets that other the minimum system requirements for Panther.
Panther is no longer available directly from Apple, but you can find the Full Retail Version of Panther, if you shop carefully, at online outlets like FastMac; HardcoreMac, AllMac etc. If you know what you are looking for, read all documentation carefully and ask questions of the seller, you may be able to get
Panther on eBay.
I will probably contact the ebay seller, since he gave the impression that he was selling the full retail version.
I definitely think you should do so.
Please do post back with further questions or comments.
Cheers
cornelius

HT3964 My computer freezes after running for about 15 min even after setting the energy saving to 3 hours

My Mac computer freezes after running for 15 min even after seeting the energy saving to 3 hours. Any ideas how to stop the freezing/

Hi Teodorafrombc,
Thanks for visiting Apple Support Communities.
If your computer is becoming unresponsive, you may want to see if specific applications are causing this behavior. Try using the Force Quit menu to check for unresponsive applications:
Using the Force Quit feature of OS X makes an application close, even when it is not responsive.
Important: Normally you should not need to force quit an app to close it. When an app is forced to quit, any unsaved changes to open documents are not saved, so try these methods to normally close the app first:
Choose Quit from the app menu. For example, in Safari, choose Safari > Quit Safari.
Choose Quit by right-clicking or control-clicking on an app's icon in the Dock
You can find the article with these steps here:
OS X: How to quit an unresponsive application using Force Quit
http://support.apple.com/kb/ht3411
If your display is going blank or seems to be going to sleep unexpectedly, try these steps first:
Reset the system
You can reset the Mac's parameter RAM and SMC.
You can find the article with these steps and more information here:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
If these steps don't resolve the issue, feel free to reply with more information about the symptoms you are experiencing.
Best,
Jeremy

Computer freezes after Post (Cannot load/re-install windows)

Hi!
I have the K8T Neo-FIS2R motherboard 1.7 bios with an AMD Athlon 64 3000+ The computer loads up correctly, sees all of the memory, both CD rom drives, and both hard drives. However, after the post my computer goes to the Load win XP in safe mode etc. and the computer freezes right there. Also, when i try to reinstall windows XP, I just get past the boot from CD option and when it says setup is examining system hardware, it freezes at this screen and will not go any further; also when it does this, my numlock key blinks for some reason. Any answers???

Quote
Originally posted by MSUHattrick
fixed... just had to disable Legacy USB support
That would have been our next route.. haha
Good to hear, bro.
Ian

Computer freezes whenever I turn on screensaver, and . . .

System Preferences freezes whenever I try to edit/change the screensaver.
I have my mac set to "hot corners" so that if I drag my mouse to the lower right corner, my screensaver will turn on. I sent in my macbook a few weeks ago to have the optical drive repaired, and when it came back, I began having another problem:
Whenever I turn my screensaver on, my macbook freezes. My screensaver is set to mosaic pictures, I think. When I drag my mouse to the lower right corner, the screensaver doesn't start and all I can see is the time (if the time ever shows up). Then I shake my mouse, etc, to try to get back to my desktop and my computer freezes and I have to restart it.
So I figured maybe it was something with my screensaver, so I went to system preferences to try and change it. I cannot click ANYTHING beyond "screensaver" (which is next to desktop at the top of the desktop/screensaver window without system preferences freezing! I can't change my screensaver, I can't change the options, I can't select different pictures, I can't click anything without system preferences freezing, and when that happens I have to force quit the application.
Any idea what is wrong here? Has this happened to any of you? What should I do?

I started having a problem with screensaver immediately after installing a batch of Apple updates, including a security update, the JAVA update and a compatibility update to QuickTime, plus the Camera RAW Update, after which I could install the Safari update to 3.2.1, which I did. The computer freezes, evidently when attempting to end the screensaver either manually, by a mouse movement, or automatically when "time is up" and it is supposed to exit screensaver and put the monitors to sleep. I have been unable to determine the cause, though my suspicions are with JAVA and Safari, because I happen to know that those running the Safari 4 beta have a problem where any QuartzComposer screensaver will not work. However, I am not getting ANY log reports of any problems whatsoever. I've tried several different things but am still ignorant of what's going on.
Francine
Francine
Schwieder

Photoshop CS6 computer freeze

I'm having a continual issue with Photoshop CS6 (13.0.6 x64) completely freezing my MacBook Pro when doing the following action:
Edit > Transform > Scale
I am able to use this action instead without any issues:
Edit > Free Transform
About my Mac:
OS X Yosemite 10.10
MacBook Pro (Retina, 15-inch, Early 2013)
Processor 2.4 GHz Intel Core i7
Memory 8 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GT 650M 1024 MB

If the whole computer freezes (can't force quit, have to reboot), then you are looking at an OS bug, a low level driver bug, or defective hardware.
Applications cannot cause a system hang, shutdown, or restart.
Given that MacOS 10.10 is a new OS version with a number of unsolved issues, it is most likely a driver or OS bug that you are hitting.

10.5.2 and Apple External Modem Dialup - computer freezes when dialing up

Hi,
Many thanks in advance for your attention.
Since upgrading to OS 10.5.2, the computer freezes (the cursor freezes) each time I try to dial up to internet. The only way to unlock computer is to shut the power button off and start over.
I am using the Apple External Modem.
Had no problems before (10.5.1, 10.5, Tiger, etc.). So far I seemingly have no problems with any other app. Only when I try to connect (dialup) to the internet.
I did the usual repair and verify permissions before and after installation.
I did a repair and verify Disc (from the Install Disc) after these problems.
Both reported no problems.
I also tried trashing Internet Connect prefs files in Home Library.
I see a lot of posts and looks for Wireless connection problems.
The only dialup solution I've read so far are people who went back to 10.5.1.
- Ross

Ross Corsair wrote:
Hi,
Found this as a suggestion on how to fix the 10.5.2 internet dialup problem, but it is so vaguely written, I have no idea what the tipster is talking about.
I assume the tipster means one types these commands in Terminal?
If someone can explain the following in English, I would be grateful.
I had problems sharing a dial-up (Modem) PPP connection. I want to use NAT for security reasons and found that only the first connection after reboot worked. Subsequent connects would fail due to NATD not rebinding the new PPP bindings. Restarting NATD fixed the problem. Luckily PPPD fires off some scripts in /etc/ppp depending on connection status. The following script restarts NATD after every successfull connect if you save it as /etc/ppp/ip-up (don't forget to make it executable):
#!/bin/sh -
N_P=`ps -uxc -U root | grep ' natd$' | awk '{ print $2 }'`
if [ "$N_P" != "" ]; then
logger -i -t $0 "Sending SIGHUP to natd (PID $N_P)"
kill -HUP $N_P
fi
Yes, this meant to be run in the terminal.
Really, the poster expected that these commands would be saved in a sh script and executed that way.
Create a txt file and past those commands into it. It will need to be saved with execution permissions.
What does it do?
N_P=`ps -uxc -U root | grep ' natd$' | awk '{ print $2 }'`
This asks the system for a list of running processes (ps -uxc) where the user is root (system admin) and passes this list to grep (which filters the list looking for a process with the string 'natd$'. This passes a single line out of the process list to awk which simply prints the second item in the list.
The end result is that the procid (process id) for the natd process is stored in the variable N_P.
Next -
if [ "$N_P" != "" ]; then
logger -i -t $0 "Sending SIGHUP to natd (PID $N_P)"
kill -HUP $N_P
fi
This checks whether a natd process was found - $N_P not null string.
If a process was found - the logger command writes and entry to the system log and then the script tries to kill the process gently (kill -HUP).
This should clear the natd process which should restart if you try and dial again.
The script is not really vague - just needs a comment or two to make it understandable to those who are not Unix geeks.

Computer freezes every time i try to copy single song from a cd

my computer freezes every time i try to copy even a single song from a cd onto itunes. I've reinstalled itunes and still have the same problem. i read somewhere that you shouldn't have 'third party extensions' but don't know what what means. Can someone please help in a fashion that you might do for a child? Thanks oh so much!!
pc Windows XP 8gig hd

It may be the drive is set to PIO instead of DMA. I;ll try to descrabe in steps what to do to check this.
1) Goto control panel>system>hardware tab>Device manager
2) Double click IDE ATA controllers
3) Rightclick "Secondary channel" and hit properties this is usually the channel most CD ROMs are on, you system my vary
4) Goto the "Advanced settings" tab and see if it say PIO. If it does goto step 5,
5) Hit "Cancel" and back in the device manager where you see "Secondary channel" rightclick it and hit Uninstall
6) close everything and reboot the PC so windows will load the channel back up in DMA mode

Explorer and Computer freezes after installation of Creative Cloud

First I had a hard time installing the programs, because the downloads always froze and I had to do it over and over. From the first start of the adobe application manager my computer were stopping, froze in and did not shut down anymore. And I have trouble using the internet, because my explorer is freezing all the time, too. Than I have to restart the whole system, until it freezes again. And the Computer as always been resetted the hard way, what brings up the Windows "the computer did not shut down..." screen and is really anoying.
System HP with 10 Gigs Memory, Intel I7 quad processor, 3600 mhz, Windows 7, NVIDIA 620

No issus with Win 7 before, no error messages. The computer starts normal, stays normal, as long as I do not use one of the Adobe products. I can start all programs, work with the programs, go into the internet, shut it down normal. As soon as I work with a application from adobe, I can use the programs, work with them , but as soon, as I try to go to the internet, i get no connection. Shutting down does not work, the computer freezes on the "shutting down" screen. Disconect power, start again, I can find no other reason than the Adobe Application manager, but creative cloud needs this thing on to work. As long as this thing is not in use, every thing is normal. I was trying ti re-install , but it did not change. The manager also keeps to "forget" my Adobe ID and is asking for it over and over.

Why does my computer freeze and curser dissapears?

Why does my computer freeze and curser dissapears?

I had a similar problem after upgrading to Windows 7. The problem seemed to be that there was a dialog box that opened
that was not visible on the screen and it was blocking the print completion. Try this. Open the Adobe PDF Printing Preferences and clear the field "Rely on system fonts only, do not use document fonts." When I did that it solved my problem.
The unseen dialog box seems to be the fault of Windows 7, in my opinion.

Gapless Computing Freezes my system

Similar Messages

Maybe you are looking for