Gaps in sound when recording

Hi 'all',
I have gaps in the sound when I record with Audition.
I dit chance the audio hardware took a new Harddisk and put a new system on it (XP) The only software on it is Audition 3.0 and CD Architect. Chanced the DMA from 6 to 5. Still the Gaps,...?! Nou I'm lost.
Hope there is someone to help.
Friendly greetings,
Cees

There was a new driver, there was a new driver. I didn't verify a rumour. So stupid of me. I installed the new driver and it works again! Your remark about the driver made me think, so I investigated this driver issue and solved the problem, thanks to your remark ofcourse. How drivers are a sensibility-issue in the computer world. My tape machines luckily don't need no stinkin' drivers.
Thanks again!
Greetings,
Cees

Similar Messages

Can you use midi sounds when recording videos on Photobooth?

Can you use midi sounds when recording videos on Photobooth?
Basically, i like to record videos of me singing and playing guitar or keyboard, but to get a good sound for the keyboard I'd like to be able to record the audio using MIDI sounds...
Ive got Logic, I've got M-Audio Fast Track Pro, into which i have my mic, guitar, and keyboard midi plaugged into. I can use it to record the mic and guitar on photobooth as they are audio inputs, however i can't use the midi sounds on the keyboard :/ I have tried having logic open with the desired MIDI sound selected whilst recording but it doesnt work...
Is there ANY way this is possible?
HELP PLEASE!
Thanks!

I Have just the same problem, if I shout very near the microphone i can just hear something, did you manage to solve the problem?

No sound when recording videos with iphone 4s - ios7

Since I have downloaded ios7 to my iphone 4s I am no longer getting any sounds when recording videos. When looking back at past videos I have recorded, they still have sound in the playback. I have tried resetting my phone and reseting it to factory settings. Any recommendations?

Hey Bryan3939!
If I'm reading this correctly, it sounds like you might be experiencing an issue with your microphone recording during videos. I have an article for you that can help you troubleshoot this issue:
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Thanks for using the Apple Support Communities. Have a good one!
-Braden

TS3376 The microphone on my i-pad mini does not seem to hear/pick-up any sounds when recording videos, facetime etc. Has anyone else had this problem?

The micro phone on my i-pad mini seems to have stopped working. The unit has never been rough housed and is always kept in a safe environment....we can hear everything fine, but no one can hear us and it does not pick up any sounds when recording video. Any suggestions on how to fix it?

I Have just the same problem, if I shout very near the microphone i can just hear something, did you manage to solve the problem?

Popping/clicking sound when recording in garageband 09

How do you take off the clicking/popping sound when recording in garageband 09

WOW THANK YOU YOUR THE BEST THANK YOU SOO MUCH :):):):)

No sound when recording videos iphone4

Hello,
When i record videos with my Iphone 4 there is no sound when i read them and, when i try to use the speaker during calls my correspondants don't hear me.
Any clue about this ?
Thanks

Hello Kboum,
It sounds like the microphone on your phone is not functioning correctly in either the Camera app or the Phone app. I recommend the troubleshooting for it in the article named:
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Make sure nothing is plugged in to the jack connector.
Make sure nothing is blocking any of the microphones (see the pictures below to locate the microphones on your device)
Make sure none of the microphones is obstructed by dirt or debris.
Turn the iPhone off and then on.
Make sure that the latest version of iOS is installed.
If necessary, find general iPhone hardware troubleshooting suggestions.
For further assistance, contact Apple Support.
Thank you for using Apple Support Communities.
Take care,
Sterling

Bad sound when recording presentation in keynote with animation

When recording audio for a presentation, in a slide with some animated objects the recorded voice explaining the slide sounds crasping or double with lot of noise while the animation is taken place, after the animation the recording it's ok again.

I have it set to 44.1kHz and "4ch-24bit". The only other option for the bit depth is "encoded digital audio".

How do you record video with usb mic and have the audio from garageband be the sound when recording and not just your normal voice but garage band effects for youtube?

How do you record video with usb mic and have the audio form garageband be apart of the video when recording, meaning the audio from garageband and echo and not just your normal voice for youtube post?its not add the garageband audio its just normal voice from mic no effects is going thru?

Hi Life93,
What you describe would be possible by recording your video, then removing the audio from it and adding audio from GarageBand once the video is in iMovie (I presume here that you are using iMovie for your video production. Other applications may need different methods.)
See this thread on how to remove the audio from a clip in iMovie -
Is there a way to separate audio from a video c...
https://discussions.apple.com/thread/1779767
To add audio from GarageBand use this article -
iMovie '11: Add a sound clip to your project
http://support.apple.com/kb/PH2255
Thanks for using Apple Support Communities.
Best,
Brett L

Apogee Duet/ Logic 8 - Lose Right Channel Sound When Recording

Hi all. Using Logic Pro 8.0 on an Intel iMac, OS 10.11, with 2 Seagate Ext. FW Drives with an Apogee Duet.
Here's the problem that's recently developed and reoccurring more frequently when recording into Logic:
I plug guitar or a mic into channel 1 of the Duet ( have double checked everything connection-wise - all good)
I hear the signal from the input in both ears... everything fine so far.
I record or rehearse and all is well.
I stop the playback and then I only hear/monitor my current instrument or mic in one ear (usually the left - the right channel disappears. This has nothing to do with the headphone or speaker connections as all pre-recorded tracks are still coming out in stereo (both ears).
Sometimes if I just press play and stop, the missing side will reappear, but not always.
If I was just recording into channel 1 of the Duet and I encounter the problem, I physically unplug the source and put it into channel 2 and re-arm the input and/or the record and then I have 2 sides again... strange.
As well, when I use a Logic session template under this same setup, I can hear my guitar in both ears , but the moment I mute an effect in the channel strip I'm playing through... boom.... one ear/side is gone. I can only get it back by unmuting the effect or going through the above mentioned unplugging routine.
To sum up, I should be able to simply monitor my guitar or mic input in both ears (stereo) without it disappearing randomly. I know a guitar/mic is mono but you should be able to have it coming out both sides. It always worked until the Duet started acting up.
Lately, I also have been hearing strange artifacts and phasing when monitoring a LIVE source back through the Duet... this is intermittent but becoming more frequent. Previously recorded tracks are sounding ok.
Any tips or similar experiences? I'll give Apogee a buzz and see what they can offer.
Thanks all.
Dave

Hi,
Thanks for offering your tip... much appreciated. When setting Mono versus Stereo, are you referring to the little "circle" icons at the bottom of the channel strip, next to the "I" (input monitoring)?
I did have it set to mono, with a single meter in the mixer window channel strip and still had the right channel disappearing suddenly problem. Speaking of the mono/stereo circle icons, why is it that some channel strips show these icons but others don't? I have two guitar tracks that both play back fine, but one allows access to the mono/stereo select icon but the other doesn't display it. They're both identical in every other way.
My feeling is that this could be a Duet problem because of the thin phasey ring modulation sound and level changes that will appear suddenly while monitoring a clean input source moments after everything was just fine.
Maybe this is because I'm still on 8.0 and Tiger? I'm in the middle of a project and can't risk update problems right now. What do think about the latest Logic with Leopard....safe to do and still have access to previous Logic 8.0 session files?
Thanks for your kind advice!
Cheers,
Dave

No sound when recording videos 4S

Just got my 4S today and have found that every time I record a video it doesn't record the sound. There is a sound on playback, like a crackling or like a old projector noise. Has anyone else had this?
I can use Siri, I can play youtube videos back but I just can't get sounds to record with my video.

I rung apple and they are sending me out a replacement. I must say I was very impressed with the customer service. I was on the phone for less than five minutes (would have been quicker if I could remember my phone number!) and I received an email saying they will be sending me the replacement quicker than they told me on the phone.

Small Gap In Regions When Recording?

Hello everyone,
I've noticed for a while that when I am recording from my Apogee Duet interface into my MacBook Pro that I can see small "gaps" or "spaces" in the region that is being recorded at the time.
When the recording stops the gaps fill. But it still concerns me as to what exactly is going on?
I don't believe I am over working my HD or CPU because I barely see their meters show any indication of use.
My I/O Buffer size is set to 256, I've tried lowering it to the lowest but that just sounded pretty crappy, and then again trying it at the highest possible buffer size of 1024 which had noticeable latency.
Is there anything I can do to get these "gaps" to disappear?
I don't think that they effect the recording much but I'm not a professional so I wouldn't be able to tell.

Hi,
since this is only a graphical issue, forget about it. While recording, Logic has better things to do than to smoothly calculate the waveform display. It simply waits until the recording is finished until cleaning up these graphical glitches. While recording, the waveform display is only "quick&dirty" sketching.
Fox

G570 Windows 7 microphone problems (choppy sound when recording)

Good morning,
I have a nice Lenovo G570 with Windows 7 that has been running perfectly for quite a while. I have some old audio tracks (multi-track recordings) that I have done using Audacity on an ancient Windows XP desktop.
I installed a new version of Audacity (64 bit) for Windows 7 from their website and it is fine. It opened up, displayed, and played the old audio tracks without a problem. It even allowed me to remix them as well.
My main problem is using the microphone and wanting to do some musical recordings and multi-track recordings on the Lenovo G570. I plug a Shure microphone (using a 1/8" adapter) into the mic jack on the side of the G570 and start to record. It works fine and allows me to record the first track (keyboards). But yet when I go to record the second track, while listening to the 1st track (i.e. multi-track), the microphone input dies out, gets choppy, fades back in to normal level, fades back out, etc...
I ran a test on the microphone jack and the drivers (Conexant SmartAudio HD)... I plugged my MP3 player into the mic jack using a stereo 1/8" cable and clicked "Listen to this device" and then clicked Apply. One of my MP3 tunes started playing, but was so awful and so choppy, I instantly knew I had a problem.
I downloaded the latest Conexant SmartAudio HD driver from your website - - 8.54.4.51 and installed it and rebooted. I still have the same problem with choppy audio when using the microphone for recording.
What gives? I performed the same test on my wife's Dell laptop (as seen above with my MP3 player), and a Beatles tune came through beautifully. You could hear Paul McCartney clearly singing, "Yesterday... All my troubles seemed so far away..." and it was not choppy at all. Then again, my wife's Dell laptop does not use Conexant SmartAudio HD for sound drivers.
Can you provide any help with this strange issue with using the microphone for recording so it won't come across all choppy?
Solved!
Go to Solution.

Thanks for the reply. I got it worked out... I contacted Audacity and went over and over everything them. I downloaded and installed the latest audio drivers from Lenovo too (version 8.54.4.51). On my Lenovo G570 with the Conexant SmartAudio HD package, I had to do into the "recording devices" section of the audio after selecting the microphone (either internal or external - if it's plugged in). Then click on "Advanced" and go down to the checkboxes and uncheck:
Allow applications to take exclusive control of this device
Give exclusive mode applications priority
...and finally...
Enable audio enhancements
Click OK, exit out of it, close everything, reboot...
Sha-zam.. Audacity records perfectly fine without any problems, choppyness, cutting in/out, etc... and on all tracks, while other tracks are playing.

No sound when recording videos

Hi,
I m facing problem with my lumia 820, it's not recording sound with videos. When video is played, it gives buzzing sound. Its similar for any App which uses MIC for sound recording....
Any help.

Hi, TejinderPS. Did something happen to your Lumia 820 before this audio issue came up? Do you also experience the same thing during calls? Are you being heard by the person you're speaking with?
If your phone has a body cover that might block the microphone, try removing it and see if the you'll be able to record videos with clear audio quality. You can also try rebooting your phone by simultaneously pressing and holding the volume down and power keys until it vibrates and restarts.
Let us know how it will go. BTW, congratulations on your first post!

Has anyone experienced no sound when recording video on iPhone 4/4s?

THIS IS ACTUALLY A SOLUTION. My wife has an (ancient) iPhone 4. Yesterday she downloaded latest iOS her phone will accept -- 7.x. All of a sudden she had no audio on her video recordings nor with Facetime (she could hear the other end, but they couldn't hear her). Scoured the net and saw many "solutions" -- shut down and reboot; clean small mic next to headphone jack with a needle; etc. Nothing worked. And then I came across an obscure post from 2010. Here's what fixed the problem: (1) While completely covering (as in letting in no sound) the above-mentioned tiny mic next to headphone jack on top with your finger, make a video recording; then (2) While completely covering the mic on bottom to the left of USB port with your finger, make a video recording. Now try to make a video as normal. For me, bam...problem solved. Maybe making the two recordings while covering the mics somehow recalibrated the system? Who knows. Hope this helps.

I was really bummed when this happened to me. I've only had my iphone for a month. I JUST figured out what was wrong. Apparently the video sound is a separate function from the iphone's volume. So, all I did was play a video and while it was playing, turned the volume up using the plus button on the side of the phone. If you do this when you're not playing a video it will only affect the iphone's volume and not the video's. Hope this helps!

Problem Recording Sound when Recording Video with iSight

I am trying to make a short movie using iMovie '08 (ver. 7.1.4) with my built-in iSight camera and built-in mic on my iMac (2.16 GHz Intel Core 2 Duo). I want to post this short movie in my MobileMe gallery.
I am able to record and view the video (event) using the iSight camera. However, I cannot get the movie (as I record the video) to pick up any sound.
The mic appears to be working okay: when I click on the microphone icon in iMovie, a "VOICEOVER" window appears. In this window, the "Record From" box shows "Built-in Microphone" selected and the Left/Right bars below shows green increasing/decreasing as I speak.
Nevertheless, I cannot get iMovie to record any sound. Obviously, I am missing some setting or process. Would someone kindly give me a little direction here? Thank you, Dale

The mic wasn't selected in the System Preferences. In the Sound pane, the "Line In" had been selected. Instead, the "Internal microphone" should have been selected. When I made this change, the mic worked fine. Dale

Gaps in sound when recording

Similar Messages

Maybe you are looking for