Garage Band fails to open files after system recovery
I recent had to have my hard drive replaced. When I got home I did a fully recovery. I was able to use logic studio with no problem. Then I opened Garageband. I could see my files however when I try to open the files, the message reads that the file cannot be opened. I then tried to run the ILIFE 09 disk to see if reloading the software would help. It did not. Can anyone tell me what may be going on here and how to fix it?
Thanks
Delete the Garageband Preferences.
Similar Messages
-
Garage band can not open files because sound can't be found
can not open file. it says sounds are not on computer. but they certenly are! it offers me to buy it.... of i dont do.
i meen i used that sound to create that file...
one day it just worked again for some times. but now same problem again...Please repost in the InDesign forum. It sounds like a permissions issue. Please state your OS, your version of InDesign, and the location of the files that you cannot edit.
BTW, in Lion, Apple decided that older files cannot be opened for editing. You need to open the file and do a save as to create an editable file. This is supposed to protect you from accidentally overwriting old files. I think it is a little big brotherish. But some have said they are happy with the new way of handling old files. -
Missing files after System Recovery, HP Pavillion G62, Windows 7, 64 bit.
My 5 month old laptop is showing signs of slowing down. When this occurs I do a system recovery in an effort to correct any problems. After completion of system recovery I always get the following error;
(the system cannot find the file specified (Ox80070002))
C:\users\owner\applicationdata\locallow.
C:\users\owner\contacts.
C:\users\owner\searches.
The notice is in Notepad. None of the files can be found with a search from the main menu. If no refererence to the files can be found how does the computer know they exist? My feeling is that the computer cannot operate up to speed with missing files?
I do have some other oddities occuring but I don't think you can solve anything if files are missing.Those are user file locations and will not affect windows or how it runs, you can ignore that error.
-
PLEASE PLEASE HELP lost files after system recovery
Hello Everyone,
I did a system recovery, using a backup from last year. However, I lost all saved files since that last backup, including some VERY IMPORTANT family pictures. Is there anything that I can do to get those files back? Please help me guys, I am so torn right now and it's tearing me apart. Thank you so much for any help.Hi,
I have to agree with "lead_org", as the restore process might have left some "unrestored", but in the same time hidden part. So really in this situation, please try to use some "restore" tool, that will enable you to view "deleted" files.
Not really good news, I do understand it.
Cheers -
Problem restoring my files after system recovery
Hey so, I just recovered my system. The process had me backup all my files on an external harddrive. I now am trying to restore the files from the harddrive using the cyberlink recovery manager, the problem is that, everytime I run the app it freezes after about an hour. The progress bar remains at 0% even though i see files being copied below it. Any ideas on how to circumvent this? Do i need to use recovery manager? All the files in the folder are in some format that looks as though theyre useless without an app configuring them.
There is usually one file in the backup that has .EXE extension, maybe be named Restore.exe or Recovery.exe. Clicking it extracts the files.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
Do I not get the "open file after publishing" checkbox with the trial version?
I owned the Adobe Acrobat 8 Professional version on my pc, and recently bought a Mac. Do I not have the option to "Open file after publishing" checkbox with the trial version? Do I have to repurchase the whole program to get that?
uninstall.
download from prodesigntools.com.
if you follow all 7 steps you can directly download a trial here: New Adobe Lightroom 6 (CC) Direct Download Links – Free Trials | ProDesignTools
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version. -
ASM to non-ASM database duplicate-ORA17503:ksfdopn:2 Failed to open file
Hi,
I am trying to duplicate an ASM database in to non-ASM database.
Having trouble when trying to start the duplicate database, it is looking for the redologs which are there in the ASM diskgroup in the production database, but the duplication database is non-ASM,
The database version is 10.2.0.4 on HP-UX 11.31
ORA-00313: open failed for members of log group 11 of thread 1
ORA-00312: online log 11 thread 1: '+DATADG/orcl/onlinelog/group_11.302.670427231'
ORA-17503: ksfdopn:2 Failed to open file +DATADG/orcl/onlinelog/group_11.302.670427231
ORA-15001: diskgroup "DATADG" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
Sun Aug 21 14:20:14 2011
Errors in file /u01/app/oracle/admin/orcl/udump/orcl_ora_12482.trc:
ORA-00367: checksum error in log file header
ORA-00305: log 12 of thread 2 inconsistent; belongs to another database
ORA-00312: online log 12 thread 2: '/oradbstg/oradata/orcl/redo01.log'
Sun Aug 21 14:20:14 2011
RESETLOGS after incomplete recovery UNTIL CHANGE 3632387878
Resetting resetlogs activation ID 1179611173 (0x464f7025)
Sun Aug 21 14:20:14 2011
Errors in file /u01/app/oracle/admin/orcl/udump/orcl_ora_12482.trc:
ORA-00313: open failed for members of log group 7 of thread 1
ORA-00312: online log 7 thread 1: '+DATADG/orcl/onlinelog/group_7.298.670427121'
ORA-17503: ksfdopn:2 Failed to open file +DATADG/orcl/onlinelog/group_7.298.670427121
ORA-15001: diskgroup "DATADG" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
Sun Aug 21 14:20:14 2011
Errors in file /u01/app/oracle/admin/orcl/udump/orcl_ora_12482.trc:
ORA-00600: internal error code, arguments: [kgeade_is_0], [], [], [], [], [], [], []
ORA-600 signalled during: alter database open RESETLOGS...Any help would be appreciated.When you are performing this task , is the ASM diskgroup "DATADG" mounted or existed.. try to figure out that first whether the diskgroup is mounted/existed or not .. And also when incomplete recovery is performed oracle creates the online redolog files when you start the db with resetlogs..
you can go through the following link :
http://oracleinstance.blogspot.com/2010/08/duplicatecloneconvert-asm-file-system.html
Cheers! -
Hey!
I have a problem where I don't know how to configure the EFISTUB to boot ArchLinux along Windows 8. I have read the instructions on the wiki and tried for two days and the only thing I've come up with is copying some files into the /boot/efi/EFI/arch/ folder, and adding the entry into the UEFI boot menu. I can select it when Restarting Windows8 through the shift-restart thing and stuff but when it attempts to boot it says:
Failed to open file: arch\boot\archiso.img
I don't know how to set this up and fix it. I am so confused with everything right now due to the instructions on the wiki basically being "You can either do it this way, that way or any other way." but does not specifically expain how each works (at least so that I understand it fully) and what has to be done to complete these steps. Like, I need a complete tutorial from Start to Finish, to do this because I'm too nervous messing up my partitions. I have understood some parts thought and what I want is to be able to boot it from the EFISTUB instead of chain-booting like I usually do. I just don't know how to connect the entry in the list to the proper files to boot the system.
What I have done:
Installed the base system.
Istalled grub in the base system but has not used grub to install on the /boot yet because I don't know if it is to be used if I'm supposed to use the EFISTUB (I was thinking efibootmgr would be enough)
Tried to use efibootmgr to make the entry, but the entry does not work. (If this is how I should do it, can you explain which partition to target and what the different values would mean when answering?)
I don't know which one is right, or if both shall be done (I guess Grub is used if I want to chain-load. I guess I can do it if it's the only way)
Anyway, I hope you guys can answer me so I can fix this. ThanksWhat you're trying to do now is:
EFI->kernel (EFI stub)
This is appealingly direct, but it's tricky to get working. What the wiki now recommends is:
EFI->gummiboot->kernel (EFI stub)
...or...
EFI->GRUB->kernel
These approaches are less direct, but they're easier to configure. The trouble is that both the EFI's built-in boot manager and the EFI stub loader are tricky to configure. For a newbie to get them both configured correctly on a first attempt at installing Arch is very difficult. Getting the EFI to launch gummiboot or GRUB is easier because these programs don't require the complex parameters that the EFI stub loader requires. Those parameters can instead be specified in the gummiboot or GRUB configuration file, which is easier to manage for quite a few reasons.
If you want to pursue using the EFI stub loader directly, you certainly can. I've learned from experience, though, that it's not worth my time to try to help with users who want to do this. Using an intermediary program is easier to get working. IMHO, the direct approach has no real benefits except that it gives you bragging rights that you've done it. Your system won't boot any faster or more reliably in the more direct approach. (Well, technically it will be faster, by only by a matter of milliseconds, assuming you use a 0 timeout value in gummiboot.) In fact, it will be less reliable, because gummiboot, GRUB, and rEFInd all offer ways to adjust boot options on a boot-by-boot basis, which is very helpful when fixing problems. You can't do this with the direct approach. -
Failed to delete file after processing FTP
Failed to delete file after processing. The FTP server returned the following error message: 'com.sap.ai i.adapter.file.ftp.FTPEx: 550 Unexpected reply code *.txt: The process cannot access the file because it is being used by another process. '. For details, contact your FTP server vendor.
I got this error many times for the same interface. Not sure what is the reason for this.
Searched on internet go comments that this is because of FTP version!
Please helpIt is the "Msecs to Wait Before Modification Check" in the Sender Adapter that ensures this. It works like this: PI starts processing, finds a file, then waits the number of miliseconds specified and checks the file again to see if it has changed over the waiting period. If so, then it waits again to make sure the file is written completely. Only if no changes took place over the waiting period, it starts processing the file.
And the fact that your file was successfully processed at retry only confirms that it might have been still written to by the sender system. You can try comparing file's creation timestamp (in OS level) with its processing start time in PI - this could prove me right.
Edited by: Grzegorz Glowacki on Jan 13, 2012 2:15 PM -
Too many open files in system cause database goes down
Hello experts I am very worry because of the following problems. I really hope you can help me.
some server features
OS: Suse Linux Enterprise 10
RAM: 32 GB
CPU: intel QUAD-CORE
DB: There is 3 instances RAC databases (version 11.1.0.7) in the same host.
Problem: The database instances begin to report Error message: Linux-x86_64 Error: 23: Too many open files in system
and here you are other error messages:
ORA-27505: IPC error destroying a port
ORA-27300: OS system dependent operation:close failed with status: 9
ORA-27301: OS failure message: Bad file descriptor
ORA-27302: failure occurred at: skgxpdelpt1
ORA-01115: IO error reading block from file 105 (block # 18845)
ORA-01110: data file 105: '+DATOS/dac/datafile/auditoria.519.738586803'
ORA-15081: failed to submit an I/O operation to a disk
At the same time I search into the /var/log/messages as root user and I the error notice me the same problem:
Feb 7 11:03:58 bls3-1-1 syslog-ng[3346]: Cannot open file /var/log/mail.err for
writing (Too many open files in system)
Feb 7 11:04:56 bls3-1-1 kernel: VFS: file-max limit 131072 reached
Feb 7 11:05:05 bls3-1-1 kernel: oracle[12766]: segfault at fffffffffffffff0 rip
0000000007c76323 rsp 00007fff466dc780 error 4
I think I get clear about the cause, maybe I need to increase the fs.file-max kernel parameter but I do not know how to set a good value. Here you are my sysctl.conf file and the limits.conf file:
sysctl.conf
kernel.shmall = 2097152
kernel.shmmax = 17179869184
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
fs.file-max = 6553600
net.ipv4.ip_local_port_range = 1024 65000
net.core.rmem_default = 4194304
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 4194304
limits.conf
oracle soft nproc 2047
oracle hard nproc 16384
oracle soft nofile 1024
oracle hard nofile 65536process limit
bcm@bcm-laptop:~$ ulimit -a
core file size (blocks, -c) 0
data seg size (kbytes, -d) unlimited
scheduling priority (-e) 20
file size (blocks, -f) unlimited
pending signals (-i) 16382
max locked memory (kbytes, -l) 64
max memory size (kbytes, -m) unlimited
open files (-n) 1024
pipe size (512 bytes, -p) 8
POSIX message queues (bytes, -q) 819200
real-time priority (-r) 0
stack size (kbytes, -s) 8192
cpu time (seconds, -t) unlimited
max user processes (-u) unlimited
virtual memory (kbytes, -v) unlimited
file locks (-x) unlimited -
Hello experts,
I am doing system export.
as per the system copy guide I follows all steps.
when I tried for export preparation.
I got following error in "/tmp/sapinst_instdir/ERPEhP4/LM/COPY/DB6/EXP/CENTRAL/AS-ABAP/PREEXP/R3ldctlExport.log"
ERROR: failed to open file "/db2/PRD/sapdata4/export_prd/ABAP/DATA/SAPSTR.LST"
/db2/PRD/sapdata4/export_prd is my export directory.
but I found that the "SAPSTR.LST" is not exist in the location.
also I don't find any log regarding this error.
how to resolve this? please guide.Hi Rupesh,
In continuation of previous mail, there is keyboard problem hence spelling mistakes.
Various possible solutions:
Report SMIGR_CREATE_DDL has to be executed before starting export preparation.
OR
Download llatest kernel patch and apply them in /spmnt/<SID>/exe
make sure download latest patch R3ldctl file and R3load from SAP Marketplace and apply them in to /sapmnt/<SID>/exe.
Make sure export dump folder should be in local drives (in windows) or local filesystems i.e.do not use network drives (windows) or NFS (in case of unix).
FInally check permission by using chmod 777 in exportdump folder in case of unix.
Regards
APR -
Linux Error: 23: Too many open files in system
I crashed the my oracle instance with the following error:
Tue Feb 13 22:15:16 2001
Errors in file /home/oracle/product/8.1.6/admin/v2qa1/bdump/lgwr_14175.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: '/db03/v2qa1/system/log/redo02.log'
ORA-27041: unable to open file
Linux Error: 23: Too many open files in system
Additional information: 2
LGWR: terminating instance due to error 313
Instance terminated by LGWR, pid = 14175
Is the number of open files adjustable?
Why am I opening files?
Could the fact that our java stored procedures are trying, unsuccessfully, be leaving files open?
Thanks - Craig
nullincreasing the oracle users ulimit to unlimited fixed that error for me. Type
ulimit -a
and look at the open files parameter. See your linux doc's to increase it to unlimited (will probably be increased from 1024 to 4096). -
11GR2 2nodes CRSD ASM - Failed to open file in dirty mode
Hi...
we facing a problem with a two node 11gr2 cluster.
Independently first started node one ore node two. The node that has start first starts normal.
The second started node fail with error mess ......
vi .../emcrsp.log
2011-04-17 10:19:14.406: [ OCRASM][4090540208]ASM Error Stack : ORA-15077: could not locate ASM instance serving a required diskgroup
2011-04-17 10:19:14.408: [ OCRASM][4090540208]proprasmo: kgfoCheckMount returned [7]
2011-04-17 10:19:14.408: [ OCRASM][4090540208]proprasmo: The ASM instance is down
2011-04-17 10:19:14.416: [ OCRRAW][4090540208]proprioo: Failed to open [+DGCONF]. Returned proprasmo() with [26]. Marking location as UNAVAILABLE.
2011-04-17 10:19:14.416: [ OCRRAW][4090540208]proprioo: No OCR/OLR devices are usable
2011-04-17 10:19:14.416: [ OCRASM][4090540208]proprasmcl: asmhandle is NULL
2011-04-17 10:19:14.416: [ OCRRAW][4090540208]proprinit: Could not open raw device
2011-04-17 10:19:14.416: [ OCRASM][4090540208]proprasmcl: asmhandle is NULL
2011-04-17 10:19:14.416: [ default][4090540208]a_init:7!: Backend init unsuccessful : [26]
[ CLWAL][738463920]clsw_Initialize: OLR initlevel [30000]
2011-04-17 10:19:15.272: [ OCRASM][3128352944]proprasmo: Failed to open file in dirty mode
2011-04-17 10:19:15.272: [ OCRASM][3128352944]proprasmo: Error in open/create file in dg [DGCONF]
[ OCRASM][3128352944]SLOS : SLOS: cat=8, opn=kgfolclcpi1, dep=402, loc=kgfokge
The interlink is up and running.
We try to recreate the OCR and Voting from daily backup without any result
Does anyone has an idea ?
Thanks *T
Edited by: tbrinkmann on Apr 20, 2011 5:15 AMHi Paul,
yes the ASM is down.
That was confusing me. If I shutdown the other node the +ASM can start and clustering com´s up normal.
It looks like only one node can use voting or ocr....
The behavior looks like the interlink is down buts is not ;:-(
One node ( first com´s up) start normally and take all cluster resources ...scan .. the vips..
And second node show this error mess..
Thanks
*T -
MacVim - Persistent UI failed to open file file
Hi,
I have recently installed MacVim. Now, every time i start MacVim from the Terminal, I have this error message :
Persistent UI failed to open file file://localhost/Users/Me/Library/Saved%20Application%20State/org.vim.MacVim.sa vedState/window_2.data: No such file or directory (2)
I saw that the file file://localhost/Users/Me/Library/Saved%20Application%20State wad locked.
How can I solve this problem?
Any help would be appreciated. Thanks.<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by zhai ping ([email protected]):
I have uploaded the word documents by sql loader,but some documents succeeded,some failed
why?
1.create table
create table wordtable(
title varchar2(256) primary key ,
content blob);
2.load.ctl
load data
INFILE 'load.dat'
INTO TABLE wordtable
APPEND
FIELDS TERMINATED BY ','
(title,
ext_fname FILLER CHAR(80),
content LOBFILE(ext_fname) TERMINATED BY EOF)
3.load.dat
ND551,./doc/001.doc,
ND552,./doc/002.doc,
ND553,./doc/003.doc,
ND554,./doc/004.doc,
ND555,./doc/005.doc,
ND556,./doc/006.doc,
4.Use sqlloader to load the documents
sqlldr userid=test/test control=load.ctl log=load.log
<HR></BLOCKQUOTE>
null -
When i down load a book on to my ebook reader i get a message saying "failed to open file"
When I down load a book on to my ebook reader and try to open it I get a message saying "failed to open file"
Restart your Mac and the scanner then try scanning.
By the way, there's an alternative to using the Canon scanner software.
Use the pre installed Image Capture app in your Applications folder instead > Mac Basics: Using a scanner
Maybe you are looking for
-
Select List not working in report - see demo
Ok.. I have created a demo on APEX 4.1.1.. & 4.2 and it fails when 10 chars or more are in list, with 103 rows or more http://apex.oracle.com/pls/apex/f?p=13679:1 workspace:nzp username:demo password:demo Dean
-
Getting null returned when working with Linked Lists
Ok, i'm having the same problem with a couple of methods that deal with linked lists, and i was hoping someone could lend me a hand. First off, the specifications for one of the methods: An iterative procedure smallElements PARAMETERS: a ListItem ref
-
Hi, Is it possible to create tasks in project roadmap? Like transaction type 1003? Or how can we manage task in Solution Manager Project Management Best regards
-
Remove borders around background images in toolbar..
I'm using RH8 in Win 7 to output webhelp, and I'm creating a new skin. I've used the Webhelp skin editor to add button images and a toolbar background. But after generation, if the browser is resized to > the image width then the image repeats and th
-
I recently purchased a MacBook Pro running Mac OS X 10.7 Lion and decided that I don't think I really need my desktop computer which runs on Mac OS X 10.6 Snow Leopard. I'm trying to figure out how to transport all the data I have stored in apps such