Garage Band ringtones

When I upgraded to 10.4.11, I noticed there was also an upgrade for GarageBand. How do I create a ringtone?
Is there a Manual out with instructions?
Thanks for the help, in advance.

You need to have the latest version of GB from iLife 08. From there you just import the audio, trim it down to 30sec and export it as a ringtone.
Keep in mind it is only to be used for non DRM, non copyrighted or royalty free content.

Similar Messages

  • Garage Band Ringtones will not sync

    I have created two ringtones with Garage Band. I used the share menu to send them to iTunes. They show up in iTunes and play OK. They will not sync to my iPhone 5 however. Sync ringtones is checked in iTunes for the phone. Looking at "on this phone" under Tones, both are there but have the "to be downloaded" dashed circle on the left hand side. I have tried syncing with "All ringtones" and "Selected ringtones". Any suggestions would be appreciated.

    Try reading through this and see if you can find a solution: http://discussions.apple.com/thread.jspa?threadID=1362096&tstart=0

  • I've never used garage band. How do I create a ringtone for my new Iphone4s?

    I've never used garage band. How do I create a ringtone for my new Iphone4s?

    Onefineday wrote:
    How do I create a ringtone for my new Iphone4s?
    this explains how:
    http://www.bulletsandbones.com/GB/GBFAQ.html#makeringtone
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • How do I create a ringtone for my iPhone 5 from garage band?

    How do I create ringtones from my music in iTunes for my iPhone 5 using Garage Band? Thanks

    http://support.apple.com/kb/ht1358

  • Create ringtones with Garage Band v.1.1.0?

    I just purchased an iPhone 3G today, and wanted to create customer ringtones. I am using Garage Band 1. I can't figure out how to do it, and I'm wondering if it is even possible with this version of Garage Band. Anybody know the answer?

    up towards the top of the window you'll see:
    Apple.com > Support > Discussions > GarageBand > GarageBand '08
    click on "GarageBand" and you'll see the GB1 forum

  • How can I use Garage Band for ringtones? I dont get it

    I fairly new to the apple world. I want to use a song from a CD in my iTunes library in Garage Band then crop it and everything to make a ringtone for my iPhone. Is this possible?

    On you MacBook go to Garageband and go to the bottom right to find you iTunes music. Find a song and drag it to the editing section find the part you want to have as a ringtone (it must be 40 seconds or under). Go to Share at the menu at the top of the screen, click share "Ringtone" with iTunes and it should ask you to adjust. Their will be a little green line in the window near the top adjust the green slider to be as long or a bit longer than the ringtone and click again share then send ringtone to iTunes. Then when you plug in your iPhone go to the Ringtones tab and specify wether you want to sync all or select ringtones to your iPhone.
    For more information send me a message.

  • Garage Band not sending Ringtones to iTunes

    Hello, here's the thing, i have updated to the latest version of Garage Band after hearing that i could make my own ringtones with it. I tried it and success! i have like 6 or 7 ringtones made directly from Garage Band. Now here's the problem, i purchased a new HD to put my music and movies on it, so i went to the finder and transfered the itunes music folder on my old HD and put it on my new HD, then i opened itunes and in the preferences tab i located it so that it would read it from its new location. iTunes updated the library without trouble, and now i have all my music and videos from my new HD. The thing is that now i go to Garage Band to make a new ringtone (the process like i did before the new HD) and it creates it, but now the newly created ringtone does not appear on the ringtones pane in itunes, and therefore it wont appear on my iphone under the ringtones tab. All of the other ringtones appear without trouble, just the new ones that don't appear. Am i doing something wrong? I've looked in spotlight and i cant find them anywhere. Please help guys!

    I'm no Mac expert here, but in Windows you could solve this problem by dragging and dropping the files from Explorer (Finder?) right into the iTunes library.

  • Ringtones using Garage Band 3.0.5

    Can I make a ringtone in Garage Band 3.0.5? Can you only do this with the newer version in iLife 08?

    Only with the new version.

  • Can't import ringtone from Garage band 6.0.5 to iTunes 11.0.4

    On my Mac I can't import ringtone from Garage band 6.0.5 to iTunes 11.0.4. I can create the ringtone but when I share it vanishes instead of going into the Tones like it used to do.

    Is that, how far you get?
    You select, "New Project" and select a "Podcast" project template? And then you get that error message? Or do you see the File Choser dialogue, but get the error message, when you try to save the project?
    That can either mean, that the "Podcast" project template is not readable, or that you cannot write to the GarageBand folder in your home folder.
    Check the System Library, if the Podcast template is properly installed:
    /Library/Application Support/GarageBand/Templates/Projects/
    Look into the folder "Library", directly on your MacintoshHD, then "Application Support", "GarageBand", "Templates" for 08. Podcast.band.
    If it is not there, then your GarageBand installation is incomplete and you need to reinstall it. If the file is there, check the permissions. Can you open the file 8. Podcast.band, if you copy it to your Desktop and double click it, to open it in GarageBand?
    Regards
    Léonie

  • I am a Garage Band idiot.  Ringtone help wanted !

    I only bought iLife '08 b/c my friend told me I can make my own free ringtones from GB. (I am glad i got the iLife because iPhoto is 100% better than it was)..
    Anywho, I have no idea how to even begin. I start up Garage Band, and I get those 4 choices, I click New Project, and then what?
    All I want to do is drag a song from iTunes into Garage Band, Select a particular verse, and send it back to my iTunes ringtones folder.
    Does anyone have the time to explain this to me or a helpful link that shows step by step.
    I can tell that there awesome things you can do with G.B., but **** if I know how to do it!
    Thanks alot!!

    Okay. This is real easy. What you want to do is, find the actual song file you want to make into a ring tone. You can't just drag and drop thing directly from iTunes into GarageBand. Your iTunes files are found in User/Music/iTunes/iTunes Music.
    Once you find the song file you want, just drag it into a new track in GarageBand. Once the file is loaded into GarageBand, you have to select a section of the song not to exceed 40 seconds. After you've made your selection, trim off the unneeded sections of the song. You then need to loop the song. Do this by clicking on the loop tool at the bottom of the GarageBand window. It looks like two curvy arrows. Drag the yellow loop bar thingy that appears at the top of the song so that it extends the full length of your song.
    All that's left to do now is select "share" form the Apple menu bar and select "Send Ringtone to iTunes." All done.
    Here's a step by step that may cover anything I've missed:
    http://lifehacker.com/software/how-to/create-custom-iphone-ringtones-the-free-an d-apple-way-334073.php
    Enjoy!

  • Can't Import Right Protected AAC songs into Garage Band

    I have always been able to take a track from my iTunes library (whether the track was a purchased iTunes or one ripped from a CD) and bring into Garage Band to play with (I'm currently trying to make christmas ringtones for my Droid). All of a sudden, Garage Band is giving me an error code that I can't import songs that are right protected. I just imported (and saved as a ringtone) a song and now, 20 minutes later I can't do it. Does anyone have an answer for me? I appreciate any feedback.

    It was never possible to import DRM protected songs from iTunes. The others were probably unprotected songs (which you can buy on iTunes too).

  • Garage Band 4.1.1 Crashes

    Yesterday I downloaded and installed Garage Band 4.1.1 after reading at iLounge about its support for making custom ringtones for the iPhone and exporting them to iTunes. I followed my usual routine when downloading updates through Software Update - repair permissions, download and install, repair permissions. Today I tried to make a ringtone following the ten-step instructions at iLounge and could not get beyond the main Garage Band window for more than a few seconds before it crashes unexpectedly. I restarted several times, repaired permissions again, tried beginning a new project, opening an existing project (the one I named and saved from trying to start a new one), but nothing works. It crashes within seconds of opening its main window each and every time.
    After talking to a Mac friend of mine later today, I went looking for, downloaded, and installed iLife Support 8.1.1, of which I was not previously aware. Still no change - crash, crash, crash.
    The crash report for sending to Apple, among a LOT of other things I don't understand, says "Exception: EXCBADACCESS (0x0001) Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000000 Thread 0 Crashed:"
    I have no idea what that means.
    I upgraded to this Mac Pro in mid-October from my old 733 mHz G4 and this is the first problem I have encountered. This is also the first time I have tried to use Garage Band, which came pre-installed on the computer along with the other iLife '08 applications, so whatever is crashing it could have been present in the 4.1 version before I installed 4.1.1 for all I know.
    Does anyone out these know what is going on and what I might do to fix this?
    Thanks in advance for any help.
    Bob Krueger

    try deleting GB's prefs:
    http://www.bulletsandbones.com/GB/Tutorials.html#deletingprefs

  • Garage Band for IOS and iCloud

    Hi all,
    I created a song with Garage Band on my iPad2 which I want to save in the iCloud, load it with Garage Band on my iPhone 4s and then export it as a ringtone.
    "Use iCloud" is activated. According to the descriptions I read you have to tap the "Edit" button, select a song and then an iCloud symbol should appear in the Top Bar. But it doesn't. The same on my iPhone.
    IOS 6 and Garage Band 1.4 on both devices.
    Any ideas?
    Thanks,
    Carsten

    Have you activated iCloud as described below?
    Use iCloud with GarageBand
    "Use iCloud" is activated. According to the descriptions I read you have to tap the "Edit" button, select a song and then an iCloud symbol should appear in the Top Bar. But it doesn't. The same on my iPhone.
    IOS 6 and Garage Band 1.4 on both devices.
    The cloud should appear in the top bar, as soonsas you activate "Use iCloud" and go to "Edit" mode. It will be dimmed at first, and become enabled, as soon as you select a song to share.
    So, if you do not see the cloud symbol in the toolbar, enabling iCloud must have gone wrong. Are you signed into iCloud on your iPad and iPhone?
    This is what it should look like, when you press "Edit" - fitst you see the cloud in the toolbar, as soon as the cloud has been enabled and after selecting a song the "Upload" banner will be shown.:
    After the upload your song will show a cloud symbol:

  • Ich kann die über Garage Band erstellten Klingeltöne nicht verwenden.

    Sie werden zwar unter Klingeltöne angezeigt aber wenn ich sie aktiviere, klingelt trotzdem nur der Standartton. Ich muss jedem Kontakt einzeln den GarageBand Klingelton zuweisen, damit das überhaupt mal funktioniert. Wenn ich das Handy ausschalte und wieder an, ist wieder nur der Standartklingelton aktiviert!  Auch iPhone neu aufsetzen hat nichts gebracht. Weiß jemand woran das liegt?

    Auch iPhone neu aufsetzen hat nichts gebracht. Weiß jemand woran das liegt?
    Bisher leider nocht nicht - das Forum hier ist voll von ähnlichen Fragen, aber leider noch keine Antwort. Das scheint an der neuen Systemversion IOS 7 zu liegen - trat das Problem bei Ihnen auch nach dem update auf IOS 7 auf?
    TS1702 Since iOS 7 upgrade, ringtones created in garage band do not remain as standard ringtone when iPhone 4S is turned off and on. The song has to be resaved in GarageBand as ringtone, re assigned and selected on settings. Has anyone found a way round this?
                                                                                                       Ringtones with GarageBand                                            
                                                                                                       Help with ringtones!!!                                            
    Schicken Sie bitte einen Bug-Eeport an Apple, damit das Developer-Team das Problem sieht, je mehr von uns Rückmeldung geben, desto schneller wird es eine Lösung geben: Das Feedback-Formular ist hier:
    http://www.apple.com/feedback/garageband_ios.html
    -- Léonie

  • Is there a way to get a version of the Garage Band app that runs on version 5.1.1?  I have an iPad 1 and can't get any higher iOS.  The App store is telling me that Garage Band only runs on iOS 7.

    Is there a way to get a version of the Garage Band app that runs on version 5.1.1?  I have an iPad 1 and can't get any higher iOS.  The App store is telling me that Garage Band only runs on iOS 7.

    Unfortunately the answer is still no.

Maybe you are looking for

  • How to add multiple entries at once

    Hi, I need to define Tax Jurisdiction codes under tax on sales/purchases node and i have almost thousands of entries. Is there a way to add all at once ???? Please let me know.. Thanks, adv

  • Nokia C3 IM Chat not working.

    Hi , I have a Nokia C3, wherein the in-built chat application does not open up and gives error after checking for new Chat updates as follows:  "Could not connect to the network. Check your phone's connection settings and try again" !! I use a relian

  • Photoshop install getting hung up

    Installed Creative Cloud and trying to install Photoshop but just gets hung up and won't move on past 42%. Can't seem to cancel and restart/retry, or uninstall the program from my computer either.

  • SQL COMMAND LINE DISAPPEARD

    I AM ALREADY IN THE CHAP05 OF THE BOOK. I USED THE OBJECT BROUSER TO CREATE SOME TABLES. AFTER THAT I TRIED TO USE THE SQL COMMAND LINE BUT EVERYTIME I HIT "ENTER", THE COMMAND LINE JUST DISAPPEARED ON ME RIGHT AWAY. I CANNOT EVEN GET THE RESULT AFTE

  • Merging two catalog.ircat files

    Hi, I borrowed a macbook pro during my holidays and used a demo version of lightroom on the macbook. Now I want to move the catalog.ircat file to my imac and merge it with my excisting catalog file. I already moved all the raw files to my imac. But i