Garage band says that I'm not connected to the internet.
after finishing the download, it says that i need to be connected to the internet to download, but I'm already connected. And then it closes and when I rerun it, it starts the 40min download again. And gives the same message. Everytime.
See this thread -
It says this everytime I try to download the new content:
Many are having the same problem.
Similar Messages
-
It downloaded fine, but when I attempt to install it won't verify, saying that I am not connected to the internet when I know that I am! Tried on several wifi connections while plugged into power source. Any advice is appreciated!
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
How do you restore an ipod shuffle when it keeps saying that iTunes is not connected to the internet?
I would try the router reset. That's sadly all I got.
-
My Linksys WRT54GS says that I am not connected to the internet, but I really am.
The Linksys EasyLink Advisor is telling me that there is a problem and the internet connection is not working.
However, my computer and every other computer and laptop connected to this router can get on the internet perfectly fine without any problems.
Why is it saying my connection is not working when it really is? How did I get rid of this message?Probably you need to uninstall the software to eliminate that problem.
-
Itunes says that i am not connected to the internet when i am
when trying to upgrade my ipod itunes says that it cannot contact the ipod software server because i am not connected to the internet. my internet is fine i can go to itunes store and i even tryed to redownload itunes but iit continues to say that message
SOOO, with some research, I have FOUND THE SOLUTION!
Its your firewall blocking itunes from opening.
I have Trend Micro protection, but this is for Norton Antivirus,
http://service1.symantec.com/SUPPORT/nip.nsf/0/7fb6e478e2a1abf78825708b00558625? OpenDocument&seg=hm&lg=en&ct=us
Follow thouse rules and I am sure everything will be back to normal. -
After installing Lion on my mid 2010 macbook pro 13" (7,1) I went to download extra voices and every time i am met my the message, "The voice ....(dots are where the name of the voice) can't be installed now because you are not connected to the internet."
I then installed Lion on a 2011 13" macbook pro (8,1) and was able to download voices straight away. Is there a bug with the voices with 2010 macbook pros and is there a way round this problem or am i going to have to wait for Apple to release a fix for it?Thank you a billion times over - I never would have figured that out, and certainly would not have a hair left on my head if you handn't taken the time to post the solution!
-
After I select to install Windows Support Software on a USB external drive for Windows 7 the computer says I'm not connected to the internet. Obviously I am or I would'nt be typing this message.
See here for Connection Issues
http://support.apple.com/kb/TS1379
From Here
http://www.apple.com/support/itunes/troubleshooting/ -
The iPad keeps giving me an error that it is unable to verify the update due to not being connected to the internet, but I am. I have tried power cycling the iPad, disconnecting and reconnecting to the internet... None of which has any effect. Any ideas?
1. Close all the applications (double click home button and close the running applications.
2. keep the home+power button pressed till the time device reboot automatically.
ones rebooted go to settings-> general -> software update.
it should check for the latest update 7.1 which you can download and install. -
So my friend had my iPod and he disabled it to where it said "iPod disabled connect to iTunes" but my computer will not connect to iTunes and I really need to know if there's a way I can restore my iPod?
Restore, if iTunes will let you. Everything except the password will be restored. Connect via cable to the computer that you use for sync. Be forewarned that it takes a long time. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
What do I do to correct this problem? I've also used the restore feature on the computer to an earlier date, but still no change.
Is there a firewall or virus scanning software issue? Disable those and see if it helps. Try resetting the router
-
hi,
on two occasions, when trying to start an application, i received a warning saying i need a java runtime (?) but that i was not connected to the internet while in fact I was. I controlled this by selecting the system network preference which confirmed my internetconnection was working properly?
thanks in advance
ps: sorry for my language as i am not a native speaker
patrickBecause the machine is not able to resolve the name of the server where it needs to get the Java runtime from. Seem to be a lot of wonky DNS out there.
Temporarily switch your DNS to 8.8.8.8 and 4.4.4.4, open a terminal, and type 'java -version', to get it to install the runtime.
Then put your DNS back the way it was. -
I recently purchased an iPhone 5c and for some unknown reason I can't connect to my wireless router's network at home. I've tried establishing a seperate IP address, manually adding the iPhone device, and even spent an hour with Centurylink's IT support and they couldn't figure it out. They said it was an iPhone error. I had an iPhone 3 about 1 1/2 years ago that had the same problem. I ended up getting rid of the phone because I couldn't solve this problem before. I thought a newer phone would not have the same problem.
My phone shows that I'm connected to my home internet, but when I open up network information for my home internet there is no IP Address listed. Safari and my other apps also state that I'm not connected to the internet. I'm ready to sell my phone back and go to an Android since I didn't have trouble connecting with it before. We also have a Macbook and iPad that both connect to the internet just fine. Please....oh please help.I was having the same problem; I tried all the recommended fixes in the "more like this" and nothing worked, but finally found the answer. Try this: http://themiddleofthestreet.blogspot.com/2013/11/if-your-iphone-5s-wont-connect- to-wifi.html
-
From within Photoshop Elements, when I try to open Editor, a box opens that states I must activate the software. I registered and activated the software last year. When I click to activate, I get a message that I am not connected to the internet. I am connected. How do I get Editor to work?
You would get the redemption code, or perhaps even the serial number, from whomever you purchased the software from, apparently Amazon, so talk to them. This wouldn’t be the first time they’ve sold something that didn’t have all the numbers needed to license it.
A redemption code is something that is usually on the inner disc packaging if you purchase the media in a box, and there is a barcode on the outside of the packaging that must be scanned at the checkout register to activate the hidden inner code so you can redeem it at home on that website. This is what happens if you buy PSE from a brick-and-mortar store like Best Buy. I don’t’ know what happens if you purchase the downloaded version as I have never done that.
A redemption code is 24-digits of letters and numbers that you enter into a website to get a serial number, once and only once. The serial number of only 24-digits, no letters, is what you enter into the software during the install or when you run it and it asks if you want to register or run in a trial mode—whatever the exact phrasing is.
In any case it sounds like you don’t have either a redemption code or serial number—although perhaps something is listed on the purchase confirmation or your account online at Amazon or even in an e-mail from Amazon. -
I cannot synch movies to my iPad. This has worked for me in the past. I keep getting an error message that I am not connected to the internet. Yet, I certainly am. How else could I post this message. I can listen to music clips from the iTunes store, fetch my email, and read current newspapers on the internet. I restarted both my iMac and my Ipad and that didnot help.
I completely understand what is happening. I know that you are connected to the Internet. I made the suggestion because I have seen it work in similar circumstances. The Apple iTunes servers can be a bit fussy about things and sometimes rebooting the router clears up this miscommunication between iTunes and your network.
Have you tried signing into your account and then try to sync again. Go to Store>View Account. You will have to enter your password. Then try to sync again. Or try signing out completely in Store>Sign out. Quit iTunes, sign in again and then try to sync again.
Sometimes refreshing settings will help clear up weird problems. -
When I try to open editor I get an error message that I am not connected to the internet (which I am) or my computer clock is set incorrectly (which it is not).
This is normally to do with activation. You need to contact Adobe directly using the link below. Use the dropdown menu for boxes (1) & (2) to scroll down the list and choose:
1. Adobe Photoshop Elements
2. Serial number issues or activating my product
3. Click on the blue button: Still need help? Contact us – then click the button marked “chat now”
It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away. Ensure you have your serial number.
Click here to get help now Contact Customer Care
Maybe you are looking for
-
Want to retrieve lost contacts, but as a reboot and not an Outlook sync
Hope this makes sense. Wife and I are both iPhone users, but access iTunes on a PC for updates. This point, as you will see, seems relevant. When I want to add new music I have to add it to my folder and sync my entire music collection instead of jus
-
How to catch a switching of radiobutton in "AT SELECTION-SCREEN"
Hi, I have a selection screen with 2 radiobuttons in group 001. I need to perform some code when I change a status of particular radiobutton (checked - unchecked). I have a code in AT SELECTION SCREEN ON RADIOBUTTON GROUP 001 but this code is not exe
-
Substitute exchange rate (bkpf-kuty2)
Hi experts, does anybody know how to substitute the exchange rate (bkpf-kuty2) with transaction ggb1 or with an user exit? Is it possible to change exchange rate with process 1120 DOCUMENT POSTING: Field substitution header/items? I tried to implem
-
My reader XI stopped printing...
When I open any pdf files, whether from my hdd or email, Reader will open so I can view the document. when I attempt to print the file, a pop-up appears asking me to save the file again. what has me confused is the fact that the file type it wants to
-
Converting Thumbnails of lost files into low res useable files
My Network Storage hard disk recently failed completely and I have lost about 3 months of family photos (new baby). The new baby was the reason for forgetting to back-up (inexcusable). I am using Photoshop SE and it still happily shows the thumbnails