Garageband 08 not usable on powermac G5

I am trying Garageband '08 (w/latest updates) on my Powermac G5 dual 2.0 w/5GB RAM and it just won't respond. I have tried reinstalling and dumping the .plist and .cs files. I can play a few notes and then I get VERY slow response and the rainbow spinning beach ball. I searched the discussion topics but don't see an answer. I am running Leopard with all the latest updates.

(NOTE: I posted this on another thread which appeared to describe the same problem)
I had this problem, and it is now resolved. I got memtest, booted into single user mode and started the test. I realized that it told me I had an amount of memory that was much lower than what I expected (I have 8 GB). I canceled the test and shutdown the machine. I then half ejected each memory module on the side closest to the front (it's a quad g5) and re-seated the modules. I've had this problem once or twice in the past and each time pushing on the modules or re-seating them fixed it. It is a wonder I don't notice losing 2 GB of RAM especially since this machine is used for heavy-duty scientific calculations by me and my research group (I also use it to make podcasts of my lectures, hence GarageBand).
I then started the memtest again, but it was clear that it was going to take forever, so I decided to just see if the GarageBand Memory Test would be sufficient (i.e. try to make GB actually work). It did. Since my symptoms were so similar to those mentioned by others, I would certainly recommend just re-seating the memory. It is possible the modules just loosen themselves or that slight oxidation of the contacts leads to poor conduction. In any case I'm back in the garage!
First check: in About This Mac, see if you have the amount of memory you should
Second check: remove the modules and put them back
Third check: test each module using memtest (find with google)
This should solve the particular problem we have been having. It is strange that the problem seemed to be correlated with both Leopard updating and iLife 08.
Message was edited by: frenchfries

Similar Messages

  • Garageband does not show loops in browser

    Hi all,
    I'm running 2.02 and I just downloaded the Jampack freebies from .mac. I installed as instructed (drug the loops to the loop browser), however, garageband does not 'see' the new loops. They are not in the loop browser. I checked help which explained that when they are drug into the loop browser the loop index gets updated. I'm not sure this has happened correctly. Is there a way to force the program to update the index based on what it finds in the library/Apple Loops directory?
    Elsewise....any suggestions? I've tried restarting the program. I've hit reset in the loop browser, and I've made sure that the 'key filter' whatever parm in the preferences is not checked.
    bigtiny

    What you are seeing is the normal behavior of the program. If you create a song in C in 4/4 time you will see most of your loops. Garageband keeps them organized by key and time signature. I lose most of my loops when I make a song in 3/4 or 6/8 time and in a minor key like Em.
    You can get more of them to show up by unchecking the filter option in the preferences:
    1. Open Garageband
    2. In the Garageband menu select 'preferences'.
    3. In the general section of preferences uncheck the filter for more relevant results.
    I have not discovered anything that will force loops to show up in unusual keys. Some of the drum loops should show up but don't. It is possible the loops were not given the 'any key' tag. Unusual rhythms also wreak havoc on the loops selection.
    For this reason, when you make your own loops be sure to select all the parameters you want the loops to show up in.
    Kurt

  • Mail in 10.6.4 not usable: it consumes all CPU time and will not quit

    Mail application does not work properly.
    It eats up most of the available CPU time (till >300% on my machine), becomes unresponsive and will only quit when killed by a force quit in the Activity Monitor.
    I have only two accounts set up. One Gmail account and a google apps one.
    I used to synch with a Blackberry but now I synch directly through google apps.
    The problem was sporadic at best at first but has become the usual behaviour now. Major change has been installing 10.6.4
    I have switched to Thunderbird since Mail is not usable.
    Tx for any hint on how to solve this issue

    It seems to be a recurring issue with 10.6.4...there's probably not much mere mortals like us can do. I haven't found a solution. Try re-installing 10.6.4.

  • GarageBand 08 not working on PowerPC

    Hi,
    I have a refurbished G4 iBook with PowerPC that I purchased online and GarageBand has never worked properly on my iBook. The OS is Leopard 10.5.8 and GarageBand is 4.1.2. I downloaded the 4.1.2 update and reinstalled it (already had it) just to check if it was my installation. I did not receive installation media with my iBook.
    Magic GarageBand does not work. If I select Magic GarageBand, I get a starting screen for it that is not completed. Some of the words are printed over other words. The window is mainly gray and black and white. The buttons are white with no words on them. The buttons click but don't do any action. If I don't try Magic GarageBand and just have the starting screen with the Grand Piano track and try to click Track Info, sometimes it doesn't resize the display to the left and show (what I think is) the Track Info panel at the right. When it does, nothing appears in that panel. The panel is gray. The "wood" frame appears consistently at the right of the window. It seems that I always get a crash when exiting after trying Track Info.
    Many people have reported the same kind of error, especially Magic GarageBand 08 on Leopard using PowerPC. I have not seen any mention of the issue with Track Info.
    I can record in the Grand Piano track using a music keyboard and a USB cable or using "music typing" where I can type with my iBook keyboard, but I cannot use Track Info with that track (as far as I understand). I've tried clicking the Track Info button and it will sometimes result in a "ding" and GarageBand will crash after that. I can use the Show Track Info button and it doesn't seem to get the "ding" but GarageBand will crash after exit.
    I think I spent most of yesterday researching this (and had probably researched it before) and deleted the two often-mentioned GarageBand preferences files. I repaired permissions. I also deleted the emusicusbmidi driver. I created a new user account and tried to use GarageBand there, same errors as in my admin account. I do not think I have the other programs that are sometimes mentioned as conflicting with GarageBand. I looked through my Spotlight search and/or through the Applications folder and did not see them.
    My crash report file seems much like others I've seen posted in forums. (I was probably reading forum notes from 2-5 years ago.) I looked through the file for plug-in or font and did not find font. Only one plug-in was mentioned. It did not seem to have error info near it in the listing. Do the "???"'s in the display indicate an issue? I see them most often near what seems to be one of the dynamic function calls.
    I'm somewhat a new Mac user, though I have not used my iBook very extensively, mainly to access email and watch online webstreams. I usually accept the software updates that are offered (I think I always do). I think there was a major update I received after I got the iBook probably in 2009.
    Does anyone have recommendations, including where else I might check for information? I've searched Google and Apple Support and Discussions. I am planning to also see if Google Groups is searched in a different way that just Google. I may also ask at a local store that specializes in Macs.
    Have a nice day
    John Paul Fullerton
    [email protected]

    (NOTE: I posted this on another thread which appeared to describe the same problem)
    I had this problem, and it is now resolved. I got memtest, booted into single user mode and started the test. I realized that it told me I had an amount of memory that was much lower than what I expected (I have 8 GB). I canceled the test and shutdown the machine. I then half ejected each memory module on the side closest to the front (it's a quad g5) and re-seated the modules. I've had this problem once or twice in the past and each time pushing on the modules or re-seating them fixed it. It is a wonder I don't notice losing 2 GB of RAM especially since this machine is used for heavy-duty scientific calculations by me and my research group (I also use it to make podcasts of my lectures, hence GarageBand).
    I then started the memtest again, but it was clear that it was going to take forever, so I decided to just see if the GarageBand Memory Test would be sufficient (i.e. try to make GB actually work). It did. Since my symptoms were so similar to those mentioned by others, I would certainly recommend just re-seating the memory. It is possible the modules just loosen themselves or that slight oxidation of the contacts leads to poor conduction. In any case I'm back in the garage!
    First check: in About This Mac, see if you have the amount of memory you should
    Second check: remove the modules and put them back
    Third check: test each module using memtest (find with google)
    This should solve the particular problem we have been having. It is strange that the problem seemed to be correlated with both Leopard updating and iLife 08.
    Message was edited by: frenchfries

  • HT1918 I would like to change my Visa card from the account but its not changing and the billing information is not changing and I can't purchase any thing from my account its now not usable please help me to solve the problem

    I would like to change my Visa card from the account but its not changing and the billing information is not changing and I can't purchase any thing from my account its now not usable please help me to solve the problem

    You made a purchase and exhausted the credit on your card before it processed. All purchases are final. Contact iTunes Store support. You need to settle up before you can purchase or download anything else.

  • Garageband was not able to install the new sounds

    I'm on an iMac 21.5-inch (mid 2011) running Yosemite; 2.5 GHz Intel Core i5; 4GB memory.
    A few months ago, I uninstalled GarageBand. Now I'm trying to reinstall it. I can get GarageBand 6 reinstalled, but I would like to get working with the latest version. I'm able to download the latest version from the App Store with no issue. It installs with no issue.
    When I open it, it thanks for me downloading it, and then begins to download "an essential collection of sounds and loops." After a bit of downloading, it asks for my admin password; I enter it, and a few seconds later, it gives the error: "GarageBand was not able to install the new sounds. Close and re-open GarageBand to download and install them again." Closing and reopening GarageBand just takes me through the same loop (no pun intended). When the window is open, if I click on the GarageBand menu in the Apple bar, nothing happens.
    It does not ask me to accept anything; I am signed into the App Store with the same Apple ID I have always used (it is the only one I have ever had, so that's not the issue). I am an admin on my Mac, so it's not a permissions issue. It's not a password issue either.
    Things I have tried:
    Rebooting into Safe Boot and opening from there; same issue.
    Repaired permissions (it fixed oodles of things completely unrelated to GarageBand); same issue.
    Creating a new admin profile and opening from there; it gives a different error, but the effect is the same.
    Removed the program, trashed anything remotely related to GarageBand (preferences, folders, etc), emptied the trash, restarted the computer, reinstalled; same issue.
    Installed GarageBand on top of itself, just in case; same issue.
    I can't think of what else to try. Help!
    For reference, here is a screenshot of what I'm getting stuck on:

    The solution Lijoesat posted above worked for me!
    First I found the private/var/folders/ (and then lots of gibberish folders) and singled out two garageband files and deleted them. This did not work.
    I then deleted everything which may or may not be a good thing, I am an idiot, I have no idea if these are extremely important files or not!
    I tried to empty the trash bin after but many files was locked and Garageband would still not install.
    I did a restart of the computer, emptied the bin successfully and tried to install Garageband again and it worked fine!
    The inserted picture show some of the folder structure, I deleted everything after private/var/folders/

  • Ipad garageband does not syncing with icloud.

    ipad garageband does not syncing with icloud. There are garageband project files in icloud storage, but garageband can't find this files. how can I get these files back?

    Hey Dezuss!
    I have an article for you that can help you with these Garageband files:
    GarageBand for iOS: Backing up your songs
    http://support.apple.com/kb/HT4692
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • Garageband is not picking sound from builtin mic (rMBP). I recorded some tracks, now it is not working. All other apps can use the mic. Monitoring is switched ON at GB, it picks sound only some other app, eg. Skype, is used to access the mic.

    Garageband is not picking sound from builtin mic (rMBP).
    I recorded some tracks, now it is not working. I have checked GB Preferences, Audio/MIDI > Audio Input > Built In Microphone.
    All other apps can use the mic. Dictation, Skype etc. can use the mic!
    Monitoring is switched ON at GB, it picks sound only some other app, eg. Skype, is used to access the mic.
    Can any one help me, Please!
    Many thanks!

    I have foud the solution - rather stupid. The system setting for audio input was at 70%, increasing it to 100% solves the problem!

  • My garageband does not have the eye icon in the lower left corner! How do I get this?

    I want to try out some drum loops to record a very first-attempt at a new song.. But my garageband does not have de eye icon in the lower left corner. Anyone an idea what went wrong here, and how to fix it?

    I want to try out some drum loops to record a very first-attempt at a new song.. But my garageband does not have de eye icon in the lower left corner. Anyone an idea what went wrong here, and how to fix it?

  • Cannot get all the sounds in library to download. I get this message GarageBand was not able to install the new sounds. Close and re-open GarageBand to download and install them again.

    When I attempt to download all the sounds in my Garage Band library, I get this message.
    "GarageBand was not able to install the new sounds. Close and re-open GarageBand to download and install them again". When I do this, I get the same message again.
    CAn anyone advise how to get all the sounds in my Garageband library?

    the same here for the drummers sounds in garageband 10xxx

  • Line is not usable in ipad air after updating to ios 8.02

    After I updated my ios to 8.02 in my ipad air, "line" is no longer usable. The failure symptom is that I can find my friend, but the "chat" function is not usable. I've tried to close the machine and re-start up again also I tried to delete "line" and re-load from appstore but it came out in vain. Did any one suffer the same issues? Please help me, thanks a  lot!!

    Hello Shaun0606,
    Thank you for using Apple Support Communities. 
    The following article provides information for resolving issues with third party apps:
    iOS: An app you installed unexpectedly quits, stops responding, or won't open
    I would suggest reviewing the steps in the article to make sure you have tried them all. 
    Regards,
    Jeff D. 

  • TS1702 GarageBand does not appear as purchased. I still have my receipt/order number when I purchased it. Anyone can help?

    When I try to check the applications in Purchased, GarageBand does not appear even though I purchased it before.
    I also have the receipt number and order number for that transaction.
    Anyone can help?

    There is a very helpful reply already posted:
    http://community.skype.com/t5/Skype-Number/Want-to-set-up-your-Online-Number-as-Caller-ID-go-here/m-...
    the short answer is that you need to set up your Skype Number in the Caller ID feature - it's free.

  • How do I add new fonts I've downloaded to Microsoft Word? It's in my font book but not usable on MW., How do I add new fonts I've downloaded to Microsoft Word? It's in my font book but not usable on MW.

    How do I add new fonts I've downloaded to Microsoft Word? It's in my font book but not usable on MW.,

    Typical issue with Font Book.
    Restart your Mac and immediately hold down the Shift key when you hear the startup chime to boot into Safe Mode. Keep holding the Shift key until you see a progress bar towards the bottom of the screen. You can let go of the Shift key at that point.
    OS X asks you to log in (you will get this screen on a Safe Mode boot even if your Mac is set to automatically log in). Let the Mac finish booting to the desktop and then restart normally. This will clear Font Book's database and the cache files of the user account you logged into in Safe Mode.

  • Will Apple refund purchase of iPhoto as it's not usable in iOS 8

    Will Apple refund purchase price of iPhoto as it's not usable in iOS 8?

    Will Apple refund purchase price of iPhoto as it's not usable in iOS 8?
    Why should Apple do that? You bought iPhoto for iOS 7 and it is still working for iOS 7. Apple's AppStore licence does not promise, that the apps will work with future versions of the operating system or on newer hardware.
    Apple provided a way to migrate your iPhoto Library to Photos:
    Migrating from iPhoto for iOS to Photos on iOS 8
    And some help to find your photos in Photos:
    Get help finding your Photos in iOS 8
    But granted; the demise of iPhoto is a sad loss. And we can only hope, that future updates of Photos will bring back more of the missing functionality of iPhoto.

  • Lumia 800, Headset not usable after the last (01.0...

    Hello,
    I found, that from the last software upgrade the headset is simply not usable for making calls:
    - the problem is only in call mode
    - the volume up/down is not working
    - the microphone is too quiet
    Before the software upgrade everything was fine ...
    Does anybody has idea what can be wrong with the phone?

    hi mate,
    have you checked that you are up-to-date with the latest firmware installed on your device, via checking via Zune on your PC? if there are any updates, please update to the latest version offered. also check that you are up-to-date with all the latest Nokia system apps in the Marketplace. also try performing a soft reset (pressing the volume down and power buttons together until the phone vibrates).
    Let us know how you get on.

Maybe you are looking for

  • How do I change the phone number associated with messages on my Mac?

    My computer is posting messges meant for my wife. How do I delete her phone number from my iMac Messages?

  • Getting error while running the code to get the credentials from CSF in OIM

    Hi, I am using the below error while trying to fetch the username and password of OIM from the credential store: oracle.security.jps.service.credstore.CredentialAccessPermission context=SYSTEM,mapName=oracle.oim.sysadminMap,keyName= read* below is th

  • Replace PRAM battery in in Intel core2 duo iMac?

    I have just installed the iStat widget in my Intel Core2 Duo 2.16 Ghz iMac. I was a little surprised to see a battery level reading on it (of 45%). I wonder if it is measuring the remaining life of the PRAM battery. Remembering how badly my Powermac

  • Using Lightroom and Indesign CS5

    Hi, I used in the past Indesign CS3 to create a book.  It went fairly well.  that was before I started using Lightroom, which now holds my complete catalogue, edits, etc. I've recently proceeded to create Collections in Lightroom for three books I wa

  • Change status on a SC as an administrator

    Hi, Im running on SRM 6.0 and I would like to change status on a SC from staus completed to cancelled, no follow-on-doc has been created. Can I do that as an administrator? Best Regards Jonas