GarageBand '11 won't download additional loops

Hola,
I have GarageBand '11, running on Mac OS X 10.6 Snow Leopard. The Apple loops have lots of greyed-out loops that need downloading. I click to activate one, it tells me I must download the loop now or later. I click Now, it goes to Software Update which tells me there is nothing left to download because I am completely up to date. I restart GarageBand, and still the loops are missing.
It's very frustrating!
In my Software Update download history it says the loops have already been downloaded, yet GarageBand still can't see them.
Anybody got any idea what to do?
Thanks,
Graham

I just ran into this and managed to solve it, but it was a pain.  Here's my situation:
New iMac 27 inch
Used Migration Assistant to transfer all user accounts, user files, and applications off of an older (late 2006) iMac that had been upgraded to Snow Leopard and iLife '09
When trying to install the full set of Apple Loops and Software Instruments, I got the infamous "run Software Update but nothing ever downloads" problem.  After doing a lot of looking on these boards and elsewhere, I decided to uninstall GarageBand '11 and reinstall.  Uninstalling GarageBand '11 is a pain too; here's what I did:
Deleted GarageBand from the Applications folder
Deleted the /Library/Application Support/GarageBand folder
Deleted the /Library/Audio/Apple Loops/Apple/Apple Loops for GarageBand folder
Deleted anything related to GarageBand in /Library/Receipts
And everything in ~/Library/Application Support/GarageBand (this is optional I think)
I then reinstalled GarageBand from the second install disk that came with my new computer, fired up GarageBand, and downloaded the recommended update.  Finally, I opened up a new Loops project; in the Loops Browser, selected one of the missing loops; got the "run Software Update now or later" dialog, and said "Later"; quit GarageBand.  Finally, I opened Software Update, and lo and behold! the near-mythical GarageBand Loops and SW Instruments update was there, all 1.2 GB of it!
I wish that Apple would come out with a patch for this, but in the meantime, if you're situation is similar to mine (upgraded GarageBand '11), you might try the deinstall / reinstall route and see if it works...

Similar Messages

  • Unable to download Additional Loops For Garageband Ctrl R Does Not Work

    I am unable to download the additonal loops for Garageband on my iMac Purchased New Spring 2013.
    I have done the following with no success:
    Uninstalled Garage Band.
    Reinstalled Garage Band from App Store.
    Reindexed Loops
    Clicked on missing loop and choose Update Now
    Clicked on missing loop and choose Update Later
    Used Ctrl+R in App store (nothing available). (Yes, I logged in with AppleID)
    Deleted Apple Loops Folder
    Deleted Apple Loops index Folder
    Re-indexed loops in Garageband
    My Library... Apple Loops folder is empty, but the pre-installed loops for Garageband are there.
    I have also tried the terminal command: sudo softwareupdate --list
    There are NO updates available.
    Anyone have any addittional suggestions for installing the missing loops from Garageband?

    What exactly happens, when you try to download the missing loops - when you click on a missing loop and choose "Update now"?
    My Library... Apple Loops folder is empty, but the pre-installed loops for Garageband are there.
    Are you looking in the library in your Home Folder 
    "~/Library/Audio/Apple Loops/"  , or in the System library  "/Library/Audio/Apple Loops/"  ?
    The loops should be installed in the System Library  
    "/Library/Audio/Apple Loops/".
    How did you set up your new mac? Did you migrate from an older mac using Setup Assistant or Migration Assistant? Did you migrate an earlier GarageBand installation?

  • How do I download additional content (loops)?

    Many of the loops in my GarageBand library are not downloaded. I click on them and choose "download now", and nothing happens. If I click on them again, it says they are being downloaded and to check the software update app. I check that, and it says "no new updates". So how to I get all of the loops?

    I would recomend removing (Deleting) Mainstage and re-install from the App store, keep in mind the initial install is about 2-3 GB download, and then the additional content is about 30 GB.  
    To remove a Mac App Store app that appears in Launchpad
    Follow these steps while you are logged in with an administrator account:
    Enter Launchpad.
    Click and hold on an icon until you see all icons jiggle.
    Click the "x" button in the upper-left of the Mac App Store app icon you want to delete.
    Note: If you do not see an "x" button, either the app is not from the Mac App Store or you are logged in as a standard user.
    Click "Delete" in the confirmation dialog to delete the app.
    Tip: If you want to reinstall a deleted app, open Mac App Store, click the Purchases icon, then click on the "Install" button for the app.

  • Loops Won't Download, Less Instruments Than Before?

    I used to own an iMac, but thought I'd rather have a MacBook, so I switched. My old iMac had GarageBand 3 on it, and I loved it. All the loops and instruments came with the program, and I was very happy with it. However, when I got my MacBook which came loaded with iLife '08, I found that I needed to download loops separately, so I clicked the button to download the loops, and it takes me to Software Update where I was supposed to see at least something about GarageBand, but alas I did not. Another thing is that I'm missing quite a few of the synths and drum kits I used frequently on my iMac. Could someone help me out?

    http://www.bulletsandbones.com/GB/GBFAQ.html#noloops

  • I just bought 15' Mac book pro. as i work a lot on Garageband. I even downloaded all the drummers and loops to update the new Garageband 10.0.1 now my problem is that all my past work which i did on older version on GB, has missing sounds in it.

    I just bought 15' Mac book pro. as i work a lot on Garageband. I even downloaded all the drummers and loops to update the new Garageband 10.0.1
    now my problem is that all my past work which i did on older version on GB, has missing sounds in it. so here are my questions
    1. DO i have to install JAMPACKS on my new Macbook pro?
    2. Are JAMPACKS still compatable with the new GB?
    3. There is an UPDATE on the new GB on Appstore and once i click it, it goes to billing no detail is provided what this update is for so help!
    thanks

    3. There is an UPDATE on the new GB on Appstore and once i click it, it goes to billing no detail is provided what this update is for so help!
    See: This document explains what the in-App purchase is about.
    Expanding GarageBand for Mac (v10.0) content with an in-app purchase
    Do you still have your old Mac?
    How did you migrate from the old Mac to the new Mac? Did you transfer your old software and documents using Setup Assistant? Then your old GarageBand '11 version should have been migrated, and all your instruments.
    if you did  not migrate GarageBand '11, copy your old Instruments Library and Loop Library over from the old mac. Copy the following folders to a thumbsdrive and merge the missing dontents into the corresponding folders on your new mac:  (from the system library - the top level library folder on your Macintosh HD):
    /Library/Application Support/GarageBand/
    /Library/Audio/Apple Loops/
    And if you would like to continue to use GarageBand '11 for access to missing features, copy also /Applications/GarageBand over, but to a subfolder of Applications. I recommend, to install the old GarageBand as well. It can be used in parallel to GB 10.0, and will come in handy, if your old projects are having problems.
    1. DO i have to install JAMPACKS on my new Macbook pro?
    2. Are JAMPACKS still compatable with the new GB?
    The JamPacks are nice to have, a terrific collection of instruments and loops, but if you did not have them previously, that will not help with your missing instruments. You can instll them by buying Mainstage 3. They work well with GarageBand 10.0
    -- Léonie

  • How to download apple loops for Garageband 10.0.1 ?

    How to download apple loops for Garageband 10.0.1 ?

    If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailier like Amazon.com: ilife 09: Software or eBay.com.  Why, because iDVD (and iWeb) was discontinued by Apple over a year ago. 
    Why iLife 09 instead of 11?
    If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides  themes from iDVD 5-7.  The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them. 
    Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
    This shows the iDVD contents in the iLife 09 disc via Pacifist:
    You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
    Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar.  Select Size = Medium or Large.
    Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
    Follow this workflow to help assure the best qualty video DVD:
    Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    And yes, iDVD 7.1.2 will work with Mavericks.
    Happy New Year

  • When i try to download additional garageband sounds, it states that I am not connected to the internet but I am. How can I fix this?

    When i try to download additional garageband sounds, it states that I am not connected to the internet but I am. How can I fix this?
    I have a new Macbook Pro, OS X 10.9.3 and the latest Garageband that came installed.

    However, I can't see any of the new sounds in garageband??
    Have you restarted your computer after installing the additional content?
    How many drummers do you see, when you select a patch for a Drummer Track?
    If the inapt purchase has been installed, you should now be seeing 18 drum patches and not only SoCal:
    Also, if you open the "Lesson Store" view, there should be now several free basic guitar and piano lessons available for download.

  • Can't download additional content in the loops section in Logic pro x, what's the solution?

    Can't download some of the additional contents from the loops in Logic Pro x, whenever I download additional contents it takes it's time to download but then when I quit Logic and start it again, the loops still can't be selected, they aren't getting downloaded, what's the solution ?

    Just click loops , on the top of the panel click loops, and select "reindex all loops".
    http://support.apple.com/kb/HT5894

  • I've tried to download an app that I used to have but deleted. I get the message "You've already purchased this, so it will be downloaded now at no additional charge." BUT it won't download.

    I've tried to download an app that I used to have but deleted. I get the message "You've already purchased this, so it will be downloaded now at no additional charge." BUT it won't download.

    Are you certain you have enough memory left on your device to accommodate the app? Also, are you certain that an iOS 8-compatible version has been released by the developer? If the answer to both questions is "yes", then try downloading it via an iTunes sync.
    Cheers,
    GB

  • Cancel In App Purchase of Additional Loops and Sounds

    Hi there,
    A while back I purchased additional loops and sounds, but now I do not wish to download those on my new MacBook. The added content takes up storage space I can't afford. Does anyone know how to cancel the download? When I start GarageBand, it wants to download the sounds/loops, but I do not see a way to cancel and continue to use GB.

    Just to clarify: the "150 sounds and 1,500 loops" option cannot be unchecked. It's frozen in its checked state.

  • Garageband 10 won't play my old garageband files correctly

    My previous computer broke, but I had all my garageband 6 files on external HD. So when I got my new computer, it came with the new garageband. Ok, no problem. But when I open up my garageband files into the new version, nothing but the piano instrument (and a couple of other basic instruments) work. But my drunm kits, strings, and other things don't because this garageband seemed to have cleaned house and gotten rid of a ton of instruments (and replaced them with a couple crappy ones). I also had the Jam packs. So my question is this - is there anyway to get the old instruments from garageband 6 over to the new one, or, is there a way I can just re-install the old garageband, as I found it's interface to be cleaner?

    Have you already installed the additional instruments, that come with GarageBand 10?  You start the download from GarageBand's main menu bar:    GarageBand > Restore Sound Library  or Download additional Sounds. 
    That will download several GB of additional instruments and loops.    But quite a few sounds and loops will still be missing, if you previously had GarageBand 6.0.5  and the Jam Packs.  Do you still have the installer DVDs for GarageBand and the Jam packs? Then reinstall from the original media. To install the Jam Packs on Yosemite, see the FAQ:  http://www.bulletsandbones.com/GB/FAQPages/InstallJamPack10.7.html
    Some JamPack installers use PowerPC code and do not run directly on Yosemite, so you need the work-around described in the FAQ.
    If you still have an backup of your old Mac, you could also simply migrate the missing files from the Instrument Library and the loop library to your new mac.
    The instruments are installed in the folder     /Library/Application Support/GarageBand/Instrument Library/
    The loops are installed in /Library/Audio/

  • Menus are not enabled, unable to download additional learn to play videos

    Meny required menu's are disabled in my GarageBand.
    What should I do to get those enabled?  I need to download additional Learn To Play Videos.
    I have a Mac Book Pro with OS X version 10.9.5. I am In Sri Lanka atm.  Please have a look on following screen captures.

    What exactly happens, when you try to download the missing loops - when you click on a missing loop and choose "Update now"?
    My Library... Apple Loops folder is empty, but the pre-installed loops for Garageband are there.
    Are you looking in the library in your Home Folder 
    "~/Library/Audio/Apple Loops/"  , or in the System library  "/Library/Audio/Apple Loops/"  ?
    The loops should be installed in the System Library  
    "/Library/Audio/Apple Loops/".
    How did you set up your new mac? Did you migrate from an older mac using Setup Assistant or Migration Assistant? Did you migrate an earlier GarageBand installation?

  • Loops missing after  installing additional loops

    I just installed the additional loops and now the standard set of loops that were installed by default are now missing.
    Should I reinstall GarageBand?

    Nevermind, reindexed the loops and all are now showing up.

  • I found how to delete a series from my ipad, but it still won't download the last episode of the new series I am trying to have.  What have I done wrong?

    I found how to delete a series from my ipad, but it still won't download the last episode of the new series I am trying to have.  What have I done wrong?

    What is the GarageBand version that your friend is using?
    If it is GarageBand '11, version 6.0.5, you can buy GarageBand '11 as a boxed retail version with the iLIfe '11 bundle, e.g. from Amazon.
    Then you can upgrade GarageBand '11 to 6.0.5, using this upgrader from the Support page:
                     GarageBand 6.0.5
    GarageBand 6.0.5 will work well with your system.  But if your friend is using the newest GarageBand 10, this will not help. Then ask your friend to send you audio files for each track, so you can recreate the project from the audio.  Or your friend could also use GarageBand '11 for the projects you want to share, that will run well in all newer MacOS X versions, even with GarageBand 10.0 installed on the same system.
    -- Leonie

  • My songs from iTunes won't download, I went to the downloads tap and all seven of my new songs say "download error, tap to retry" and when I tap on one a message pops up saying " this song could not be downloaded at this time". What do I do?

    My songs from iTunes won't download. I recently just purchased 7 songs and they took my money but now the songs won't download to my phone. I have gone to the download screen on the iTunes app and under each song it says "download error. Tap to retry". When I tap to retry a song a message pops up saying "this song could not be downloaded at this time." And it gives me two options. Either done or retry. I have tried to download them many times. I signed out and signed back in on iTunes, restarted my phone, and even checked for any updates. Nothing seems to be working. They charged the money from my card but now my songs won't download. What do I do?

    Hello Bdev15,
    I would be concerned too if the songs I purchased from iTunes were not downloading to my iPhone. You have taken some great troubleshooting steps already, and thank you for providing the details of the steps you too.  I have a few additional suggestions to get it downloaded to your iPhone.
    First, I recommend checking to see if the download was interrupted:
    If your download was interrupted using your iPhone, iPad, or iPod touch
    From the Home screen, tap the iTunes app.
    For iPhone or iPod touch, tap More > Downloads. For iPad, tap Downloads.
    Enter your account name and password if prompted.
    Tap the blue download arrow to resume.
    iTunes: How to resume interrupted iTunes Store downloads
    http://support.apple.com/kb/ht1725
    If the songs still do not download, next I recommend downloading the songs when connected to another network.  For example, if you are using the cellular network, you could switch to Wi-Fi, or you could try an alternate Wi-Fi network.  Follow the steps in the section titled "iPhone, iPad, or iPod touch > Music" in the article below to download the songs:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/ht2519
    If you are still not able to download the songs, you can report an issue with these purchases using the steps in this article:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/ht1933
    Best,
    Sheila M.

Maybe you are looking for

  • I'm making the big switch from PC today!

    I am going to purchase a Macbook today! The Black configuration. I've always been a PC user and hated it for the most part but I'm also a gamer and that has alwasys been the only thing that put me off Macs since they don't put out as much juice as PC

  • What is the upgrade from CS3 and 3.5? do I want it?

    Dear Community. I needed to reinstall CS3. The Software Disks got ejected from my iMac I thought the Software was defective. I went searching for a replacement. I found the Version CS3.5 upgrade so I bought it for $221.00 or so. Then it dawned on me

  • Justifiy TextField Data

    Hi, Oracle 10g, How i can justify my data in text field? I mean the data must be in the middle between the upper Edge And the Down Edge. Regards,

  • Stress test tool and guidelines for tuning ADF 11g

    Hi all, I am working our ADF 11g application on load & stress testing. The load test works fine with some millions of full dummy rows (this generated data tool is easily written by ourself). The tunning only was done with only indexing. But with stre

  • ALE IDOC AND EDI

    Hi Could u pls explain whats the use of these terminology in SAP and what's the prequisites, configuration setting and how these worked. thanks