GarageBand 3: external hard drive

Hello,
New MacBook owner (3 months) & hope to use GB3. I'd like to purchase an external hard drive to store files & run GB3.
Would someone be so kind as to recommend a couple or even better, let me know what specs I should look for?
Thanks very much.

Just look for "FireWIre" and "7200RPM"
they're all pretty much the same, hard drives are only made by around a half dozen companies and then other companies buy them and put them in the own cases.

Similar Messages

  • Moving Garageband Music Files to MyBook for Mac External Hard Drive on OSX 10.5.8  I'm a musician and need to make space on my mac hd. Is it safe to move music files there and delete them on the mac? Thanks!

    use a MyBook for Mac external hard drive.
    I need space on garageband or the entire hard drive, since I am getting the "need space on the hard drive" messages.
    It's scary to move my precious music files!
    How should I move them to the external and feel safe about doing so?
    Or are there other methods besides the obvious, clearing caches, deleting the trash and downloads, etc., that are recommended?
    I am doing music now and producers are waiting for the new vocals!
    Help!
    Thanks!

    The process is as simple as just copying your Garageband project to the external drive and deleting from the macs hard drive. But before you delete anything you really need to back them up to someplace else also. Having just one copy is not safe. Get another external drive, DVDs or even flash drives, you absolutely need anything important in more then one place.

  • Can I move my GarageBand 10 loops and session drummer to an external hard drive

    Would like to download the 14GB of additional content for GarageBand 10, but I don't want to store in on my system disk.  How can I save this stuff to an external hard drive?

    It is possible; some tutorials explain how to do it on the internet:
    here is one:https://www.youtube.com/watch?v=vNzGKeIQ5IM
    edit: You would need to download the content first to your internal drive, then transfer it to your external drive. (you can't download on the external drive)

  • Recording on garageband with an external hard drive?

    Hey guys I heard someone mention something about recording onto an external hard drive, can someone explain everything I need to know about this? including the benefits, reasons for, and cons of doing it? I'm pretty confused about it all
    Thanks a lot.
    Btw, I have a laCie 500gb drive

    BMF92 wrote:
    can someone explain everything I need to know about this? including the benefits
    assuming it's a fast (7200 rpm drive in a FireWire case), it may allow you to record more audio tracks. laptops, for instance, typically have slow (5400 RPM) drives, reducing the useable bandwidth. even a fast drive in a desktop could get bogged down by other processes.
    BMF92 wrote:
    reasons for
    see above
    BMF92 wrote:
    and cons of doing it?
    you have to buy something.
    i'll add an implied "how do i use it?"
    create a project on, or move a project to, that drive, that's it.

  • Help/explanation needed - Using an external hard drive

    Hi everyone,
    I bought an external 250gb hard drive as my MBP was very close to full capacity. Yesterday, I had a bit of a scare...
    1. I backed up my Aperture Library onto the external hard drive.
    2. I had about 500 of my favourite images rated 5 star and so I selected these and set up a new project.
    3. I went through my Aperture library deleting folders/projects that I have completed.
    4. I went back into the 5 star ratings and they did not exist. I assume this is because I deleted the master files.
    5. I wanted to have the 5 star images on my laptop and so I connected my external hard drive once again. [This is where I felt I lost control and understanding of what was going on].
    6. I looked for the seperate Aperture files but could only find a file called Aperture Library. I clicked on this but nothing happened at all [I had thought that it would open up Aperture with the previous library].
    7. I dragged the library onto my desktop and waiting for all the images to reload onto my laptop. I then saw that everything was as it was previously, i.e. all the files and images existed. However, my hard drive space was even lower [I assume this was because the current workflow that I had left on the laptop was now duplicated?].
    8. Then I got a message saying my iDisk space is critically low and may damage my Aperture library. Moments later the majority of my images disappeared and a red space appeared where every photo had previously been. Since I have 2 weddings that I am yet to deliver I was very panicked. I tried to drag and drop the Aperture library once again and the message came back that the operation could not be completed due to the current file already existing.
    9. I unplugged the external hard drive and the photos re-appeared [much to my delight]. However, my concern is that I really don't understand what happened and more importantly why. I will need access to the data on the external hard drive in the event in the near future and am worried that the same thing will happen next time I connect it.
    As a result of all this I have some questions, as follows:-
    - Have I adopted the completely wrong approach to backing up data?
    - Can the master files be compressed as I shoot RAW and these are huge files?
    - Why could I not use the Aperture library stored on the external hard drive without downloading it back onto the laptop?
    and a more general question about file storage...
    - I am confused as to how much hard drive space is being used on my MBP. I have 13gb in Aperture, 1gb in iTunes and 1gb in iPhoto. However, I only have 50gb available, so half the capacity is currently being used. I know that Aperture and Garageband applications use about 10gb between them and there is of course the operating system, but 50gb in total seems a lot. On investigation in the finder screen I see that on my personal drive the Aperture, iTunes and iPhoto data is stored there. However, it is also stored under pictures and music respectively. Does this mean that it is storing duplicate copies of this data and that is the explanation for such high hard drive usage? If this is the case, can one be removed?
    I appreciate that this has been a long email, but I felt it was important to illustrate the steps I have taken. As you will no doubt glean from this post I am not the most computer literate person. Any help/explanation would be most appreciated.
    Many thanks,
    Jamie

    Hi Jamie.
    I am not sure what went wrong with your setup but I will let you know my configuration as an example and you can decide if you think it is a good way to have it. I am asuming you are using ver 1.5?
    Like you I have only a Laptop (G4 17" 1.5Ghz 2 Gig Ram - would love a macbook) so hard disk space is a premium. I also have an external firewire drive to hold all the HiRes RAW images. When I download my images from the Camera I do it manually into folders on the external drive (Cataloged by Date and maybe description of location). I then Import the images from those folders into Aperture but use the option when importing to "Store Files - In their current location".
    My Aperture library file is on my laptop so all that it has to store is the "Preview" file that gets generated automatically (in the preferences I have it set up to the resolution of my laptop 1440pix so that if I did a slide show it is only as big as my screen - anything more is a waste of disk space IMO.)
    I do it this way so that it is easy to find and work on my files with other programs such as Photoshop by going straight to the image rather than exporting from Aperture.
    Obviously I cant edit the RAW files while the drive is disconnected but I can still do ratings and keywords without the original files being there.
    I hope this helps.
    Regards
    Andrew
    G4 17inch   Mac OS X (10.4.8)   2 Gigs RAM

  • Is it possible to use backup files previously copied to an external hard drive to backup an iPhone?

    My sister froze her iPhone by trying to turn it off during a software update (not sure why) and restored it because she thought it would fix it. Unfortunately she unintentionally deleted all of her data and settings. She doesn't use iCloud, so I'm assuming all her files are backed up to her computer when she syncs her iPhone, but using iTunes I can only find two backup points using Edit>Preferences>Devices, both in the past few minutes. I know that each sync overrides the last backup files instead of creating newer ones, so apparently older backup files from her computer can't be used to recover her data. However, we both periodically use an external hard drive to back up our computers by basically dragging and dropping our files onto it, so there is an earlier version of her User folder on the external hard drive. It would definitely be preferable to use the backup files from a few months ago that are on the external hard drive and lose a few photos than to lose years of data, so would it be possible to direct iTunes to those backup files (AppData etc) instead of the ones saved on her computer hard drive? There's not any kind of browse option I can see that could allow me to get iTunes to search for backup files on the external hard drive and I'm not computer savvy enough to manually find the files and connect them to iTunes. Is it even possible to use backup files from an external hard drive? Do I have to replace the ones that exist on her computer now?

    Garageband can't use VST plugins.
    If you're talking about AUs: you could try to put an alias into the HD/Library/Audio/Plug-Ins/Components folder instead of the actual files, and see if GB loads them.

  • Using an External Hard Drive to Run Logic

    In an attempt to keep logic from continually telling me there is a "system overload" I'd like to run as much of the program off a faster external hard drive. I've all ready download all the applications and most of the loops.I realize that you can't run the applications themselves from an external hard drive but would like to keep everything else off of the computer.
    There are some things I have not download for the program just yet but what I have downloaded that aren't applications I'd like to move to the exHD.
    So my questions:
    1) In general, how do I do this?
    2) Do I need to create user files on the exHD and then create a path? If so how do I do that?
    3) Where do I find the files on the internal HD to put on the external?
    4) Do I need to partition the external drive for this?
    5) Are there any other questions I should be asking?
    I've searched for answers on this and seem to find solutions that hint around it but don't address it specifically.
    Any help is appreciated

    Hi,
    1) Copy your *EXS Factory Samples* folder to anywhere on another disk, delete the original, and put an alias of it in the original folder(s). Id. For Garageband content.
    2) No.
    3) Your EXS content should be here:
    /Library/Application Support/Logic/EXS Factory Samples/
    /Library/Application Support/GarageBand/Instrument Library/Sampler/Sampler Files/
    and the same for Users/'you'/Library/Application Support/Logic, ~Garageband.
    4. No.
    5. No, just this one.
    You can leave the instrument files where they are, just copy/move the samples.
    btw, You can disable the annoying system overload message in the Audio Preferences, General tab.
    regards, Erik,

  • Okay so I have a Seagate Backup Plus Drive External Hard Drive and I'm trying to get it to backup Applications and stuff on the dock such as iPhoto, and Photo Booth.

    It's one of these External Hard Drives. I go to the Finder folder and go to the "Seagate Backup Plus Drive" to see what's in there and what I assume is that backups but the only thing that seems to be in there is folders from everything that is Desktop and a few Documents. The Applications folder seems to be empty and there are no folders for Photo Booth or iPhoto. Everything from GarageBand and iTunes seems to have been backed up according to the Seagate Backup folder when it is plugged in and opened. How do I get this thing to backup everything from Photo Booth and iPhoto? And by the way, I can't seem to access Time Machine the way you get it to where you can go back in time and see all of your stuff from previous dates. I don't know if this is important or a crucial part but I seem to not be able to access the actual time Machine Layout.

    Simple on that one - Download Carbon Copy and follow the steps below:
    if you have access to an external USB enclosure use it, or you can buy one for $10...
    install your new ssd in the usb enclosure - connect to your macbook...
    open disk utility and format/erase your ssd - mac os extended journaled.
    open carbon copy - clone your drive with it - source (your old drive) + destination (your ssd).
    once the clone is done, turn your macbook off - take old hard drive out - install new ssd in....
    turn your macbook on - if boot time is more than 40 secs to desktop - go to system preferences - startup disk and select your new ssd as the startup disk - restart your macbook - should be about 14 sec boot time now.
    install your old hard drive in your usb external enclosure and use it as a backup drive.
    good luck

  • Moving sampler instruments to external hard drive

    Is there any way that I can move my GarageBand instruments and the exsp24 instruments to an external hard drive? I'm using an iBook and the internal hard drive is just too slow for my tastes.

    Let's assume you have raw MP4 clips in an event.
    You start a project and select portions of the clips to be in the project. You add titles, music, etc.
    Then you Share/Using QuickTime in MP4 format. At this point, the movie is rendered by using the Project file as a roadmap to go our and get the right clips from the Event files, add the titles, add the music etc. and produce a single MP4 movie that you can play.
    You may get better results if you use a variant of MP4 called h.264.
    You can also adjust the color of the movie using the video adjustments. Also, if your raw material is MP4, you should realize that this is a highly compressed format. You may get better results if you use a free app like MPEG Streamclip to convert the MP4 file into Apple Intermediate Codec, then import this into iMovie. Then you create your movie as always. Then you can share it as an MP$ (h.264).
    The MP4 codec has one full frame for every 24 or so frames. The rest of the frames contain information about what has changed from the prior frame, so iMovie must resolve and compute what all the frames are as it is adding the titles, adding music etc at render time - then reconverting to mp4.
    If you convert it to Apple Intermediate Codec, every frame is converted to a full frame.
    If your source material is low resolution, editing in MP4 is fine. But is your source material is high definition, you will definitely get better results by converting to full frames before editing.
    That probably isn't very clear, but come back with additional questions if you like.

  • Using g3 as an external hard drive

    Hi,
    I wish to run Finale 2001 but it only works with os9. I was going to partition my external hard drive and install os9 but I am having second thoughts.
    1. Is it possible to connect my firewire g3 to my g5 like an external hd and run finale from there,
    or should I
    2. Go ahead and make a partition and install os9 and Finale on the partition.
    Thank you
    byt
    imac g5   Mac OS X (10.4.5)   Woodwinds, presonus firebox, Garageband and Logic Express

    Mactrix,
    You were right on the money. I installed the "classic" application from my 10.3.6 disc and drug all of it's folders to my "os9" partition. Afterwards I selected where os9 would be running in the osx system preferences pane and everything worked like a charm. I could then install Finale for os9 on the "os9" partition.
    Don Archibald also helped with my problem. I cut in on one of his conversations and he, like you, was kind enough to help.
    Here is the thread.
    http://discussions.apple.com/thread.jspa?messageID=2807527#2807527
    Thank you again for your help Mactrix
    BYT
    By the way, my brother spent some time in Denmark and had a fantastic time. He said the county was beautiful.
    imac g5   Mac OS X (10.4.5)   Woodwinds, presonus firebox, Garageband and Logic Express

  • Recording onto external hard drives

    I have been having trouble recording guitar with direct input. (I am probably getting the apogee one soon) The sound is in perfect time when I record it but when I play it back it is off time, and needs to be nudged to sound correct again. I have also been recording onto an external hard drive lately, will this effect the problem in any way? Do any of you record onto external drives or do you use the computers built in hard drive?

    Sorry for the miss communication, the off timing occurs when I record onto my macbook pros internal hard drive (and that was with garageband but I am now using logic express). I don't know what the rotational speed is, but I have three external hard drives, is there a way to tell? Do you record onto an external drive or the built in drive?
    Thanks, Jv-

  • Install Logic Studio on an External Hard Drive

    Can I Install the entire application on an external hard drive?

    hiya!
    i'm an idiot i have an old Imac g4 and bought logic studio 8
    it really cant handle much so i use it for the Jam packs on garageband
    i bought an external harddrive 100gb hoping to put all of logics stuff on there
    it really anoyed me when i came to instal and it bassicaly sed i cudnt!!
    can i install just the Jam packs on the external drive ?
    how can i get on the logic install disk and just Tick jam packs but make it go on the external hard disk ??
    i plan to get a good imac one day ( this came of Ebay) so lots of stuff are really bad about it!! can you not install any program on a external disk with mac?
    cause everytime i've gone to it hassnt worked
    yet it does with xp and i hate XP
    thanks alot
    James

  • Iomega external hard drive either 'not found' by Time Machine or is now in 'read only' format

    I don't know what's going on with my iomega external hard drive.  Sometimes the HD is recognised by the computer; other times it isn't; if it isn't I can restore to an earlier back up via Time Machine app; but it's like the disk isn't writable.
    Ten days ago, I had trouble backing up my iMac using Time Machine.  After turning it off and restarting my external hard drive, it backed up successfully.
    However, today I am trying to back up my files, and TM tells me it can't find the external hard drive.  Nothing has changed -- I have been out of town this past week -- but somehow my HD now seems to be in 'read only' format.  It does turn on, and I could restore my computer to an earlier back up.
    "Mac OS X can't repair the disk.  You can still open or copy files on the disk, but you can't save changes to files on the disk.  Back up the disk and reformat it as soon as you can."
    Annoyingly, despite my HD not showing in Finder or on my Desktop (as it usually does), when I simply turn it off I get that warning message "The disk was not ejected properly".
    Have tried verifying and repairing using Disk Utility, to no avail. 
    Am prompted to reformat but I don't have a good understanding of what this means and how to do it.  I'm guessing this would wipe the disk clean and I'd have to create the initial back up image all over again -- I'm reluctant to do this since this HD is my only back up and if it all goes tits up I'll be up that famous creek without a paddle.
    Thoughts, suggestions, input all welcome and deeply appreciated -- thank you!

    fzgy wrote:
    "Mac OS X can't repair the disk.  You can still open or copy files on the disk, but you can't save changes to files on the disk.  Back up the disk and reformat it as soon as you can."
    It's possible a heavy-duty 3rd-party disk repair app can fix it, but they're expensive (DiskWarrior is about $100), and there's no guarantee it can do it.
    Am prompted to reformat but I don't have a good understanding of what this means and how to do it.
    That will erase it.  See Time Machine - Frequently Asked Question #5.
    It sounds very much like the disk is beginning to fail, although it's possible there's a bad port, cable, connection or power supply (if it has its own).
    I'd suggest getting a new one, and using it for your Time Machine backups; once you have a good backup there, reformat the old one (and select Security Options to write zeros to the whole drive -- if that fails, you know the drive is toast).  Use it for secondary backups, per FAQ #27.   If it has failed, get a second new one for secondary backups. 

  • Back up using time machine and external hard drive

    Hello,
    I am having a difficult time deciding the best way to back up important documents. 
    I have:
    1TB internal hard drive
    3 TB external hard drive and
    1TB external hard drive
    I currently have about 1TB worth of data to be stored, but that will increase to about 1.5TB once I get a bunch of stuff off the HD camera's hard drive.  I would like to keep my internal hard drive somewhat free to keep the computer running fast, but also want to make sure I am properly backed up. 
    Should I put ALL (or nearly all) of the files on the 3 TB external hard drive, and have time machine back that up and not worry about the rest? I'm a little weary about putting all of the files on one device even if it is backed up by TM. 
    If I do this, do I need to back up the 3 TB external drive in addition to using TM?
    Thanks!

    iMac11,2
    OS X 10.6.8

  • How can I use one external hard drive for both Time Machine and iPhoto Library?

    I have been using a 1 TG LaCie external hard drive for Time Machine backups.  My (older) Mac has 160 GB and is almost full.  I would like to move my iPhoto Library to the external hard drive, but I've heard Time Machine doesn't share one space well.  Should I
    1.  create another partition (but will this erase what I've already saved) with Disk Utility?  *I am running Snow Leopard*
    2.  create another volume to use for iPhoto, and if so, should the two volumes be of equal size?
    3.  leave it with one partition and move the iPhoto Library to the same partition with Time Machine back ups?
    I know I don't need the entire 1 TG for back up of 160 GBs.  Please advise the best path to take.  Thank you!

    You are getting incorrect information from your ASP. If you look at drive specifications the heat generated is no different for high vs low capacity drives.
    I have upgraded the internal drive in my iMac 2007 with a 3TB Hitachi drive without any heat issues or other problems.
    Larger hard drives have higher density platters so to access any given amount data the drives travel a shorter distance. Higher capacity drives should therefore run cooler than lower density drives because the drive spends less time spinning to access data.

Maybe you are looking for

  • Disappearing disk space Windows Server 2012 R2 with SharePoint Server 2013 Enterprise

    I've got an interesting problem with a virtual machine in our VMWare environment.  It is Windows Server 2012 R2 with SharePoint Server 2013 Enterprise installed.  I started out with a 60GB disk and it started running out of space, so I increased it i

  • M65-S9092 doesn't recognize all RAM

    I've never had memory issues with this model until recently. Memory ussage was through the roof and performance was dropping. Then I realized the BIOS wasn't seeing 500mgs worth of memory that was factory installed. What happened? Is the memory damag

  • SQL Loader step hangs in unix script

    Hi, We have a nightly job that separately truncates 6 tables and then loads them with flat file data. It works fine almost always. Eight months ago and then yesterday, one of the 6 load steps(not the same table) hung up and did nothing. Reruns ran fi

  • To check the module growth Date wise

    Dear All          Can anybody help me out to check , which module taking highest growth , per day growth , monthly growth to analyse the database growth.  Thanks. Regards Ravi Kant Arya +91 9540990385

  • FCP or Compressor Audio Problem - Please Help!

    Please Help! I have completed my wedding project in Final Cut and it includes 4 extra stereo tracks (music etc) on the Final Cut Time line, therefore 5 stereo tracks in total. Music was just imported into the browser and then placed according in the