GarageBand (4.1.2) only allows 1 software track using Korg MicroStation Plug-in Editor as software sound generator.

I'm using a Korg Microstation with GarageBand (4.1.2,2008), and installed the included plug-in editor to create software-based tracks per instructions. The first (default, grant piano) track allows me to select the Korg Microstation as the sound generator for the track, enabling access to all the Korg sounds: information is properly transmitted and loaded from the Korg into GB. However, no additional tracks can be created in the GB file; attempts to do so trigger the following 2 messages: 1) Failed to load Audio Unit, please contact the manufacturer for an updated version or further assistance. (-10110), followed by: 2) Failed initializing the plug-in. Please check your instrument library and make sure it contains the right factory presets. I've tried just duplicating the first track, but this brings up the same messages. To summarize: I am unable to create more than 1 track in a GB file using the Korg Plug-in editor as the sound generator. I'd appreciate hearing from anyone who' encountered this problem!

Update for GarageBand v6.0.5
I used a Korg Microstation and recorded midi to a track in garageband (made edits, etc) and then output the midi back to the Korg again via the supplied VST.
I then created a real instrument track to record the results from via audio inputs.
The best thing with the Korg Microstation is that you can create Zones on the keyboard to use different instruments.
This was the result:
http://www.youtube.com/watch?v=IvEdrsV70Hs&feature=share&list=UUWMd_cOTL-DuQ3IQF HuPY0g
This is the only way round it I have found.
I am looking for a simple 16 track midi sequencer... wish me luck.

Similar Messages

So I just purchased Lightroom 5 and put it on my desktop last week and my computer crashed. If I end up having to purchase a new PC, does this mean I also have to purchase Lightroom again because it is only allowed for 1 PC use?

This may seem like a silly question. But, I see on the insert that it says license is only good for 1 PC use. I am SO upset that my computer crashed, and thinking about wasting $128 makes that even more upsetting.

I'm not sure what "insert" you are talking about, but as said above a perpetual license is good for installation on two computers. If the old computer is still functional, you can either uninstall LR5 from it or consider a new computer as the second installation. If the old computer is not functional and will never be used again, then LR is not functional and this is equivalent to its having been uninstalled.

CP4 - only allow 3 quiz attempts using advanced action

Hi, im trying to create a multiple choice quiz that allows learners to attempt it up to 3 times. Each attempt takes them right through the quiz to the results slide. Ive tried an Advanced Action (see below), but it just loops to retry quiz (more than 3 times).
Aim:
If they pass they travel to results and onwards to the exit slide.
If they fail they go from the results slide to instructions slide again, to retry quiz. Unless they have tried 3 times, in which case they are taken straight to slide 6, which informs them they cannot attempt quiz again and need to contact training department. This slide then goes to exit.
Settings:
Each quiz slide allows one attempt before continuing.
Quiz set to optional so user can be sent to slide 6 without having to pass.
If pass jump to slide 5. this slide jumps to slide 7.
If fail execute advanced action (this is where i think im wrong as im new to AAs - have tried 10 or so different combos):
    check if (cpQuizInfoAttempts is equal to 3) +
    begin <NewLine>
          Jump to slide slide 6 <NewLine>
          Add statement
     end
     Or Else
     begin <NewLine>
          Jump to slide slide 3 <NewLine>
          Add statement
     end < NewLine>
     Add Statement
Filmstrip:
slide 1 -title
slide 2 - instructions
slide 3 - question 1
slide 4 - question 2
slide 5 - question 3
slide 5 - results (jumps to slide 7)
slide 6 - 3rd attempt failed (only access if failed 3 times)
slide 7 - exit
I can send a cp project mock-up via email if someone can help!?
thanks
Gav

Great thanks! I'm beginning to think it's a bug in Cp4. I read something similar on a post in here & it was a bug in Cp4. When the user clicks the button, Outlook opens but only the "To" is populated.   Everything else in the string is cut off & not read by Outlook even though it's entered like this:
[email protected]?subject=Here%20is%20the%20Subject&body=Here%20is%20the%20body.

How to only allow certain users to use internet?

Hello, I've recently taken over the job of overseeing the internet connection here in my building. We have a shared internet connection and I was told to just give out the same WEP key to everyone. The problem now is that many people have canceled, but the WEP key still works. I want to make sure that only people paying for the service are using it. What is the best way of doing this?
1. Generate new WEP keys? I think I can only generate 4. Is there a way of generating more?
2. Block certain "Device Numbers" or "mac addresses?"
I really know very little, so any help would be really appreciated.

change the wep key first and then go to the go to the wireless and then on wireless network access (on the set-up page of your router) and click on the button select MAC address of networked computers and it will display the mac address of the client's that was able to connect using the new key and so you can just easily copy it on the permit only MAC address box to flter the connectoin. So it's much easier than askign each 1 of the client's for the mac address.
Do this right after dissemnating the new wep key to the clients,

HT1420 Do I have to have a credit card linked to my childs itunes account,and if I do can I restrict its useage to only allow my child to use itunes cards?

Do I have to provide a credit card for my childs itunes account, and if I do, can I restrict my childs use of itunes strictly to prepaid itunes cards?

If you only want the free iPhone apps, take a look here:
http://support.apple.com/kb/HT2534
Read the steps carefully as the order in which you follow them is apparently critical. This seems to come and go, or only apply to App Stores in specific countries, so you may not see the option for "None" when asked for a payment type.
You will of course not be able to get anything other than the free content without entering in some sort of payment method (credit card, prepaid iTunes card, gift certificate, etc.)
Alternatively, buy an iTunes card and use that to open your account in the iTunes Store.
Regards.

Why doesn't "Elements 10 Editor only" allow the use of Nik Software plug ins??

I was very excited yesterday when I noticed in the Apple App store that a version of Elements called "Elements 10 Editor only" was for sale. Since I never use the Organizer this is perfect for me. Unfortunately, it will not allow Nik software plugins to be installed. There is no "plugins folder" included. In every other way the "Elements 10 Editor only" version is wonderful. Loads fast, runs clean and fast and is just a wonderful product, and something I've been hoping would come along for years. I can't believe Adobe didn't allow for the use of plug-ins. Looks like I just wasted $80.
Any suggestions or work-arounds to allow plug ins to be used?

Thank you, Barbara! I spent considerable time today on the phone with Nik Software. Both Viveza and Color Efex will work on the full version of Elements 10. NOT on the version "Elements 10 EDITOR ONLY". The reason is because Adobe did not include a plug in folder when they released Elements 10 EDITOR ONLY. Thanks, Barbara for the screen shot..however, the Editor only version has no folders at all!!! It's really strange. Why would Adobe release an Editor Only version of Elements that doesn't work with plug ins? I allowed Nik Software techs remote access to my Mac, and while version 9 has the same folder breakdown you provided, this Editor Only version of 10 has nothing except the application icon! You have been wonderfully helpful as usual, Barbara, thank you very much. It looks, though that I just wasted $80. Oh well, back to PSE9 !
Here's an update....using your method..I was able to find a folder for plug-ins within the program file. Used it to try and install Viveza and Color Efex, but Adobe says it "does not accept that type of file".

I purchased Adobe XI for a year. I am charged monthly on my credit card. The software only allows one print file to pdf after that it has a pop up marketing screen asking me to purchase it again. If I reboot I can get another print out of it. After a

I purchased Adobe XI for a year. I am charged monthly on my credit card. The software only allows one print file to pdf after that it has a pop up marketing screen asking me to purchase it again. If I reboot I can get another print out of it. After an hour of trying to reach somone on tech support I ran across this forum. Any help out there?

In the pop-up screen, have you tried licensing it and signing in? Signing in is crucial, so it knows what you paid for.

HT5945 Java has updated again today, i use a jave plug in to run my virtual software to access my work from home, today i have an error message saying security will not allow access to my website that i use to log in to work from, this is a JREdetection e

Java has updated again today,
i use a java plug in to run my virtual software to access my work from home,
today i have an error message saying that security will not allow access to my website
i use to log in to work from, this is a JREdetection error,
my system runs off java and citrix, i tried chrome,firefox and safari - same issue, if my system cannot detect java it wont run, it runs on plug ins.
How to i change my sec settings to allow access to this website, as i can only see that i can add apps not web addresses?

If you get an error that says can't backup, try moving the existing backup file to a safe location and thry again. again. You can find the location of the backup file here:
iPhone and iPod touch: About backups

I cannot open a .pdf in an incoming mail (Outlook 2010) with Acrobat Pro XI. It will only allow "preview". I have to copy and paste the .pdf to my desktop and then open it. What do I do to restore the 2x click in Outlook to open the .pdf? thank you

I cannot open a .pdf in an incoming mail (Outlook 2010) with Acrobat Pro XI. It will only allow "preview". I have to copy and paste the .pdf to my desktop and then open it. What do I do to restore the 2x click in Outlook to open the .pdf? As of now, I get the following bracket opening on screen when I click on the Acrobat icon for attachment within the email: Thank you
Adobe Acrobat has stopped working
Windows can check online for a solution to the problem.
-Check online for a solution and close the program
-Close the program
Problem signature:
Problem Event Name:                        APPCRASH
Application Name:                             Acrobat.exe
Application Version:                           11.0.7.79
Application Timestamp:                     536b812b
Fault Module Name:                          Acrobat.dll
Fault Module Version:                        11.0.7.79
Fault Module Timestamp:                  536b80ff
Exception Code:                                  c0000005
Exception Offset:                                00cbf281
OS Version:                                          6.1.7601.2.1.0.256.48
Locale ID:                                             1033
Additional Information 1:                  0a9e
Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
Additional Information 3:                  0a9e
Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Hi Gary,
I have seen this issue occur with users who have this registry setting missing or have improper permissions.
When you double click the attachment to launch the pdf it is saved and opened from the temporary folder unless saved specifically to a location.
If you dont have the below mentioned registry key or improper permissions then attachments fail to open.
Please heck if the following reg key exists:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security
or
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Outlook\Security
Value Name: OutlookSecureTempFolder
If the value exists, and if the value contains a valid path, Outlook 2010 uses that location for its temporary files.
If the registry value does not exist, or if the value points to an invalid location, Outlook 2010, Outlook 2007, or Outlook 2003 creates a new subdirectory under the Temporary Internet Files directory and then puts the temporary file in the new subdirectory. The name of the new subdirectory is unknown and is randomly generated, depending on your version of Outlook.
Please check the following key:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security
Note the location for: OutlookSecureTempFolder key
Check if the same folder exists in the following location and if not create a corresponding folder in the location on C:\Users\<User account name>\Appdata\Local\Software\Microsoft\Windows\......
Regards,
Rave

Installed CC on new laptop, why am I only allowed trial version?

I originally bought CC and installed on a Macbook pro. Now I've bought a new Macbook pro 2014 and installed CC, but it only allows me to run the trial version. As far as I know, CC allows for the software to be installed on two machines at the same time and since I'm logged in with my Adobe ID on the new laptop it should recognise that I have a license, or not?
What can I do to change from trial version to normal license?

Thanks for your response Kartikay :-)
I bought Lightroom before I purchased CC. I'm paying monthly invoices for Adobe CC in Denmark, my details are:
**** Order Details deleted ****
If I go to the Adobe site (through the 'so many days left of your trial' when starting up any of the CC applications), it asks me which payment plan I want to sign up with - which I really don't since I'm already paying for the service :-)

How can i share m3u8 downloaded video to wats app through video d/l app. application only allow to add mp4 videos to the camera roll and only mp4 video i am able to share. kindly suggest appropriate sollution. Thanks

how can i share m3u8 downloaded video to watsapp through video d/l app. application only allow to add mp4 videos to the camera roll and only mp4 video i am able to share. kindly suggest appropriate solution. Thanks

Hello Achates:
I did not read the rather long post. If you wish to reinstall OS X 10.4, use your software install DVD. Backup is essential. To minimize your risk, I would use an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
In that way, you will have a fresh copy of OS X and your current settings will be preserved.
Incidentally, I do not agree that the printer problem is best solved by reinstalling OS X. I have had HP printers for sometime and, on one occasion, had difficulty after an upgrade. HP technical support walked me through uninstalling all traces of the HP driver and then reinstalling.
Barry

How do I only allow certain users to print in color?

Product Name: HP Color LaserJet Professional CP5225dn Printer (CE712A)
Operating System Installed: Windows 7 Enterprise (64bit)
I work at a K-12 school and purchased the HP Color LaserJet Professional CP5225dn Printer (CE712A) for use in our computer lab. I would like to know if it is possible to have it so that only certain users can print in color (possibly put a password on it). I know the cost for color is higher, and therefore, would like it so that students have to approve through teacher if they want to print in color.
We are running it on our Print Server (networked) not through USB.
Thank you for the help.

Hi,
That's a very good question actually. In my corporate networks, we are talking about hundreds of laser printers and the ONLY thing we can do: only allow people access to a set of mono laser printers, not all printers. For example, the following printer is using B&W as default but can't stop users to print in colors if they could access to the resourse:
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I downloaded an album on itunes using my new itouch; but it's only allowing me to put three songs at any one time into the music app...how can i get it to just move them all in there?

i downloaded an album on itunes using my new itouch; but it's only allowing me to put three songs at any one time into the music app...how can i get it to just move them all in there?

hi philly, thanks for getting back to me, especially on such a busy day.
I don't think that's quite the issue though. I bought an album and it appears in 'my purchases' within the itunes app. Yet, in order to listen to the music, i must use the 'music' app and in this application, there are only three tracks displayed at any one time from my downloaded album.
I can 'download all' from the 'my purchases' section but that still doesn't help, it just keeps the last three tracks downloaded in the music app.
I have the 'icloud' enabled and wondered if it had anything to do with that.
i have successfully downloaded another full album totally into the music app, but this first album is causing me problems.

I want to set up Firefox to only allow certain pages to load - how do I do this?

My children are having my old laptop and I dont want them to be able to 'stumble' across anything unsuitable.
How can I set up Firefox so that it only allows pages to load from websites I choose?
Thanx!

See:
* https://support.mozilla.com/kb/Parental+controls
* http://kb.mozillazine.org/Parental_controls

I would like to transfer all data from my iPod classic to my new computer with windows 8.1. My old computer's cpu died. Utilizing iTunes which only allows iTunes albums purchased at iTunes store. The cd's were loaded via iTunes originally.

I would like to transfer all data from my iPod classic to my new computer with windows 8.1. My old computer's cpu died. Utilizing iTunes which only allows iTunes albums purchased at iTunes store. The cd's were loaded via iTunes originally.

Install disk drive from old computer in an external enclosure.
Then copy the complete iTunes library from the disk drive to the disk drive in the new computer.

GarageBand (4.1.2) only allows 1 software track using Korg MicroStation Plug-in Editor as software sound generator.

Similar Messages

Maybe you are looking for