GarageBand Bug? No voice when synth is used....help!

Hey guys, just got my ipad2 and have been playing around with GarageBand for the first time. Heres my problem....
I have set up quite a nice little song, I thought all was good until I went to play it and there was no voice coming through.
I have voice, synth and drums playing but I can't hear the voice unless I rewind and drop the marker right on the voice. If I let it play normally it will only play the synth and drums.
I have checked all the basics, volume etc., and after some troubleshooting I found out that if I remove the synth completely the voice will play. I have tried various synths and all had the same results, blocked out the voice.
Am I missing something? Is it a bug? Can I not use synth and voice at the same time??
Thanks in advance!

I have not encountered this, have you tried rebooting or even closing and restarting the app?

Similar Messages

Connect to Internet Message when trying to use Help in Illustrator CC

I just started using Illustrator CC yesterday. When I go to help it opens but when I try to use it, it says connect to internet to use. The thing is I am connected to the internet. Why is it it doing this? Do I need to mess with some setting or something?

Gertie,
I believe this is one for this specialized forum,
http://forums.adobe.com/community/download_install_setup
There are multiple similar threads with solutions; you may insert internet connection in Ask A Question to see them (open each in a new Tab to be able to return to the list).
If that brings no help, you may try Customer Care (tick I Still Need Help and hope for an agent available for a chat),
http://helpx.adobe.com/contact.html?product=illustrator&topic=downloading-installing-and-s etting-up

[svn] 2692: Bug: BLZ-227 - When using JMS Destination, MessageClient and FlexClient not released from memory when the session times out .

Revision: 2692
Author: [email protected]
Date: 2008-07-31 13:05:35 -0700 (Thu, 31 Jul 2008)
Log Message:
Bug: BLZ-227 - When using JMS Destination, MessageClient and FlexClient not released from memory when the session times out.
QA: Yes
Doc: No
Checkintests: Pass
Details: Fixed a memory leak with JMS adapter. Also a minor tweak to QA build file to not to start the server if the server is already running.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-227
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/services/messaging/adapters/J MSAdapter.java
blazeds/branches/3.0.x/qa/build.xml

Revision: 2692
Author: [email protected]
Date: 2008-07-31 13:05:35 -0700 (Thu, 31 Jul 2008)
Log Message:
Bug: BLZ-227 - When using JMS Destination, MessageClient and FlexClient not released from memory when the session times out.
QA: Yes
Doc: No
Checkintests: Pass
Details: Fixed a memory leak with JMS adapter. Also a minor tweak to QA build file to not to start the server if the server is already running.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-227
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/services/messaging/adapters/J MSAdapter.java
blazeds/branches/3.0.x/qa/build.xml

In Garageband, why won't the Roland HD3 V-Drums hi-hat trigger any midi at all? (It works when it's used as audio)

My drummer bought the Roland HD3 V-Drums recently, and I bought a Mac Mini (to record on Garageband).
When we record as audio from the V-Drums (using an audio interface) everything seems to work fine - but (of course) we can't change the sounds etc as it isn't midi (and we want to use midi).
When we record as midi from the V-Drums (using a midi to USB cable) there are two major problems. Firstly, the hi-hat doesn't pick up at all - despite the fact it works when it's used as audio. When the hi-hat is hit, it doesn’t trigger any midi at all. The second is that the drums occasionally trigger a double hit. This issue I can get over (though it is annoying and it shouldn't happen) as I can manually delete any extra hits.
I wouldn't expect two expensive pieces of kit (Apple Mac and Roland V Drums) not to work perfectly on something so simple. Please can you advise me of how to resolve this?
(For info, I've emailed Roland the same issue too.)
Thanks.

While connected to GarageBand hold down Variation and 7 on the HD-3 to reassign MIDI codes. Garageband does not recognize the HH "edge" codes so I changed both of these (HH OPEN EDGE and HH CLOSE EDGE) to match the value for the "bow". With the HH pedal down, hit the center of the HH pad, the screen should say HH CLOSE BOW. Remember the code, then hit the edge of the HH pad. The screen should say HH CLOSE EDGE. Use the Up arrow button to set the value for the HH CLOSE BOW. Repeat the same steps with the HH pedal up so HH OPEN EDGE uses the same code as HH OPEN BOW. To reset any pad to factory value hold down up and down button at same time. Hope this helps!

[svn] 4934: Fix a bug around when we should use NativeDragManagerImpl.

Revision: 4934
Author: [email protected]
Date: 2009-02-11 16:21:31 -0800 (Wed, 11 Feb 2009)
Log Message:
Fix a bug around when we should use NativeDragManagerImpl. Before we were checking the player capabilities to see if it was "Desktop". However, some players that are actually AIR will return "Library" instead. So rather than keying off of the capabilities of the player, let's just see if NativeDragManagerImpl is there. If it is, use it. Otherwise, use DragManagerImpl.
QE Notes: None
Doc Notes: None
Bugs: SDK-19079
Reviewer: Jason
tests: checkintests, mustella DragManager, Joann ran NativeDragManager ones
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-19079
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/SystemManager.as

Hello,
>>Does Database initializer obsolete in EF 6.0?
I do not know why you think so, if the team decides to make the database initializer obsolete, I think they would make a markup as Deprecated, however, there is not such a markup on that method on MSDN document. And the Database initializer method is useful
when we play with automatic migration. In your case, the DropCreateDatabaseIfModelChanges database initialization strategy, would delete the original database and create new one according your new model. Of course, data would be missing. If you are under a
scenario need to make a test to recreate the database frequently, this one should be ok.
Currently, there are four database initialization strategies could be used:
CreateDatabaseIfNotExists<TContext> Class
DropCreateDatabaseAlways<TContext>
DropCreateDatabaseIfModelChanges<TContext>
MigrateDatabaseToLatestVersion<TContext, TMigrationsConfiguration>
You could use one of them for a proper scenario.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

High pitch noise when recording audio using internal mic

The issue I am having is with the internal mic. When recording audio using quicktime or garageband.It is a high pitch noise that stays whether i am speaking or not. The fix i found was to lower the input volume of the mic in system preferences. However, this causes my voice to be recorded so low that audio is barely usable unless volume is all the way up. Looking around the web I found this gem:
http://www.usingmac.com/2009/6/18/recording-speech-with-garageband-2009
This help me get rid of the high pitch noise for Garageband. The noise still there for Quicktime. Any ideas on how I can keep the same mic input volume with out having to listen to the high pitch noise?
Any help is appreciated.

Did you do the usual stuff, such as reset PRAM?
http://support.apple.com/kb/HT1379
There are some sound settings in PRAM, although I think it's only for sound output.
Also, as a test, I would create a new admin user account in System Preferences Accounts pane
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8235.html
Log out and log in to the new account (do not use Fast User Switching). In the new account, try recording something using QuickTime, and note if this problem recurs. If it does not, you have eliminated a few possible causes, such as a problem with the overall system installation or a hardware issue, and isolated the problem to something in your normal user account.

A critical bug on Voice Memos

I found a critical bug on Voice Memos yesterday. When I recorded a presentation, I opened the camera app to take a photo. Voice Memos showed that the recording was still on going. However, after the presentation was finished, I stopped recording and wanted to save the file. I found the length of the voice file was far less then that I supposed. Then I realized Voice Memos only recorded the voice before I opened the camera app, but it was still displayed in recording status.
I suppose if Camera app occupies the microphone and then interrupts Voice Memos recording, Voice Memos should display as stop status. However, Voice Memos pretended that it still kept recording, so I didn't know I need to restart to record. This bug causes me to miss a lot of important voice records. I don't know how to let Apple know this critical bug and also my complaint.

http://www.apple.com/feedback

After I purchased the creative cloud, I receive an error message when trying to use premier pro cc 2014. It states "Adobe Premiere Pro 2014.2 has stopped working. A problem has caused it to stop working. Windows will close the program and notify you of

After I purchased the creative cloud, I receive an error message when trying to use premier pro cc 2014. It states "Adobe Premiere Pro 2014.2 has stopped working. A problem has caused it to stop working. Windows will close the program and notify you of a solution." When I used the trial I never received this message. Now after purchasing it I receive this error each time I open PP and am unable to use. it. Any ideas or support to fix this issue?

What does the detailed crash report say?
And have you updated your video card drivers from the GPU maker's website? (most crashes on launch are due to bugs in out of date video card drivers)

Bug in JSF 1.2 RI using in JDev 11g

Hi,
We have found a bug in the JSF RI version used by JDev 11g TP2:
In com.sun.faces.application.ApplicationImpl.createValidator, a MessageFormat is created using an erroneous pattern : created validator of type ''{0''}. This method is called by oracle.adfinternal.view.faces.util.rich.ConverterValidatorRegistrationUtils.addValidatorById. So, when the logging level is set to FINE, this crashes our application.
FYI, this seems to be corrected in the last version (1.2_06) of the JSF RI.
We tried replacing the jsf-api.jar and jsf-ri.jar files in lib\java\shared\oracle.jsf\1.2 with that new version but we are getting compilation errors in our JSPs.
Before we spend time trying to do that, can you please tell me if that sounds like the right thing to do (or if there is another solution). Also, can you please confirm that the subsequent versions of JDev will include a corrected version of the JSF RI.
Thanks.
Olivier

Hi,
the right place is JDeveloper/jsf-ri for JDeveloper. I'll file a bug
Frank

[svn:osmf:] 17958: Add layout direction attributes to work around bug SDK-26940, when in Flex 3 compatibility mode.

Revision: 17958
Revision: 17958
Author:   [email protected]
Date:     2010-09-30 11:31:49 -0700 (Thu, 30 Sep 2010)
Log Message:
Add layout direction attributes to work around bug SDK-26940, when in Flex 3 compatibility mode.
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-26940
Modified Paths:
    osmf/trunk/apps/samples/framework/ExamplePlayer/ExamplePlayer.mxml

Height is determined by content. I can't think of a single reason to have a div height of 5px because almost nothing will fit inside that small a space without problems.
As to why it doesn't show up in other devices, you must have put that style into the Tablet CSS code instead of the default Mobile CSS code.
Fluid Grids build up from Mobile (applied to everything) with specific rules for Tablets, then Desktops.
Best advice, use Fluid Grids for layout only. Use a separate CSS file for content styles.
Hope this helps,
Nancy O.

[svn] 3540: Fix for missing name of the exception class, when @ throw is used.

Revision: 3540
Author: [email protected]
Date: 2008-10-09 11:20:44 -0700 (Thu, 09 Oct 2008)
Log Message:
Fix for missing name of the exception class, when @throw is used.
Also fixes for:
SDK-17212 - Add a line feed between messages in the ASDoc validation_errors.log file.
SDK-17242 - The Constants.as and GlobalFunctions.as classes from system classes need to have their content added to __Global__.xml
SDK-17256 - For methods of the mx.components.Group class, args or return values of type Object do not appear in the ASDoc output.
QA: Yes
Doc:
Tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17212
http://bugs.adobe.com/jira/browse/SDK-17242
http://bugs.adobe.com/jira/browse/SDK-17256
Modified Paths:
flex/sdk/trunk/asdoc/templates/class-files.xslt
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocUtil.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va

Revision: 3540
Author: [email protected]
Date: 2008-10-09 11:20:44 -0700 (Thu, 09 Oct 2008)
Log Message:
Fix for missing name of the exception class, when @throw is used.
Also fixes for:
SDK-17212 - Add a line feed between messages in the ASDoc validation_errors.log file.
SDK-17242 - The Constants.as and GlobalFunctions.as classes from system classes need to have their content added to __Global__.xml
SDK-17256 - For methods of the mx.components.Group class, args or return values of type Object do not appear in the ASDoc output.
QA: Yes
Doc:
Tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17212
http://bugs.adobe.com/jira/browse/SDK-17242
http://bugs.adobe.com/jira/browse/SDK-17256
Modified Paths:
flex/sdk/trunk/asdoc/templates/class-files.xslt
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocUtil.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va

Java.lang.NoSuchMethodError when try to use RDBMS WLI adapter sp2

Hi,
We have encountered a problem when trying to use the latest version of the WLI
RDBMS adapter downloaded from the website.
This adapter comes as an ear file of size 4026K.
Has anyone been able to get this version to work??
Was using the earlier version of size 3278K happily but found a few bugs in it
so wanted to use the later version but when we do, we can't call any Application
View services.
When we try to call a service we get the error:
java.lang.NoSuchMethodError at com.ibi.beardbms.cci.InteractionImpl.execute(InteractionImpl.java:217)
at
com.bea.adapter.cci.AbstractDocumentRecordInteraction.execute(Unknown Source)
at com.bea.wlai.client.bean.ApplicationViewBean.executeRequest(Unknown Source)
at com.bea.wlai.client.bean.ApplicationViewBean.executeRequest(Unknown Source)
at com.bea.wlai.client.bean.ApplicationViewBean.invokeService(Unknown Source)
at com.bea.wlai.client.bean.ApplicationViewBean.invokeService(Unknown Source)
at com.bea.wlai.client.bean.ApplicationViewBean.invokeService(Unknown Source)
at com.bea.wlai.client.bean.ApplicationViewBean_g38mgs_EOImpl.invokeService(ApplicationViewBean_g38mgs_EOImpl.java:732)

Hi Adam,
You need to get Patch CR095687 in order to use this adapter with SP2, (and
stop this exception). It's mentioned in the release notes
(http://edocs.bea.com/wladapters/rdbms/docs70sp2/pdf/relnotes.pdf), a the
bottom of page 3. You need to contact BEA support for this patch.
Dave
"Adam Finlayson" <[email protected]> wrote in message
news:3ea8f771$[email protected]..
>
Hi,
We have encountered a problem when trying to use the latest version of theWLI
RDBMS adapter downloaded from the website.
This adapter comes as an ear file of size 4026K.
Has anyone been able to get this version to work??
Was using the earlier version of size 3278K happily but found a few bugsin it
so wanted to use the later version but when we do, we can't call anyApplication
View services.
When we try to call a service we get the error:
java.lang.NoSuchMethodError atcom.ibi.beardbms.cci.InteractionImpl.execute(InteractionImpl.java:217)
at
com.bea.adapter.cci.AbstractDocumentRecordInteraction.execute(UnknownSource)
at com.bea.wlai.client.bean.ApplicationViewBean.executeRequest(UnknownSource)
at com.bea.wlai.client.bean.ApplicationViewBean.executeRequest(UnknownSource)
at com.bea.wlai.client.bean.ApplicationViewBean.invokeService(UnknownSource)
at com.bea.wlai.client.bean.ApplicationViewBean.invokeService(UnknownSource)
at com.bea.wlai.client.bean.ApplicationViewBean.invokeService(UnknownSource)
atcom.bea.wlai.client.bean.ApplicationViewBean_g38mgs_EOImpl.invokeService(App
licationViewBean_g38mgs_EOImpl.java:732)

My macbook air (version 10.9.4) display flickers, has random tabs and windows opening, and there are random ads almost everywhere. All this happens when I am using safari. What can I do?

My macbook air (version 10.9.4) display flickers, has random tabs and windows opening, and there are random ads almost everywhere. All this happens when I am using safari. What can I do?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/(de|[nst]):/p;' ' {sub(/^ +/,"")};/r:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,Inter,iTu,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

[svn:fx-trunk] 9320: Fix Application.url property when RSLs are used.

Revision: 9320
Author:   [email protected]
Date:     2009-08-14 14:49:12 -0700 (Fri, 14 Aug 2009)
Log Message:
Fix Application.url property when RSLs are used.
Use LoaderUtil.normalizeURL() to normalize the Application.url property. Do the same thing for both the Halo and Spark versions of Application.
QE notes: None.
Doc notes: None.
Bugs: SDK-22154
Reviewer: Alex
Tests run: checkintests
Is noteworthy for integration: no
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-22154
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/core/Application.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/Application.as

When I am using Firefox I keep getting unrequested Windows opening with full page advertisements. Why is this happening and how can I stop it?

When I am using Firefox I keep getting unrequested Windows opening with full page advertisements. Why is this happening and how can I stop it? This is particularly aggravating when the new page has music or a voice message that intrudes even when I am not looking at the page.

Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

GarageBand Bug? No voice when synth is used....help!

Similar Messages

Maybe you are looking for