Garageband - Error code -39 - any clues?
I get the message 'Error code -39 was returned by the Core Audio driver' when I try and share a song with iTunes. It occurs during the mixdown phase, and from then on only a handful of tracks play!
I have 19 tracks in all - a mix of real and software instruments. I've locked all the tracks, but there is room for more optimization.
I'd appreciate any tips on how to solve this!
a -39 is an EoF (end of File) error. the first thing i'd suggest is to unlock all tracks, then re-lock them to let them re-render
Similar Messages
-
Both my iPad and iPhone have ios8
On either device in Calendars> edit >shared with> add person when I enter an email address and press add nothing happens - just goes back to edit screen and what I have entered has gone. No error message or any clue about why I cant share my calendar. Please help.UDPATE:
Spoke with Express lane, and issue was escalated. Kudos to the support guys that handled this one (Brian and Yi). Went through everything in detail and took all the crash dumps off the iphones and ipads to send to engineering.
After backing up the contacts, the recommendation was to delete all contacts in iCloud. Doing that caused my iCloud to crash (in the browser), so more crash dumps were sent to apple.
Eventually got all contacts deleted, then did a resync. Looks like IOS devices are coming back to life and syncing again.
Also, Outlook iCloud connector has just been updated to ver 1.0.1 so i installed that on their recommendation.
BOTTOM LINE workaround:
1. Backup contacts
2. Delete contacts in iCloud
3. Delete accounts on IOS devices
4. Recreate accounts on IOS devices.
Hoping a real root cause can be found and real fix implemented. This has caused me to doubt the stability of iCloud, so i will procees with caution. -
(Error code: ssl_error_no_cypher_overlap) - any suggestions?
Can't access https://www.cmsid.navy.mil/ - receiving this error, (Error code: ssl_error_no_cypher_overlap) - any suggestions?
Trying to log in - I'm a navy sailor. Used to be able to access it while I was away in school. Since I returned home, no such luck!but the regular http://www.navy.mil/ shows up fine so the subdomain is down or has been removed.
also the connection isnt trusted that is why you are getting that error message -
I replaced the hard drive, motherboard, and battery but now can not restore my Ipod 5th gen? Error code 1416, any help?
When I did a Google search on "1416 error ipod 5th," there is some discussion that the earlier version of the logic board only accepted 30 and 60 GB drives (or words to that effect), but the later "5.5" version did allow larger capacity drives. If that info is true, the question is, do you have a compatible combination of logic board and hard drive?
-
I have an old i phone 3G and do not know the password for it. trying to restore it from itunes so my daughter can use it as an ipod but keep getting error code 1015, any help on how to get passed this please?
Hi ratcat14!
I have an article that can help you troubleshoot this issue:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden -
Flash Player 11 won't install on my new Samsung 2 7 ICS tablet. Error 941. Any clues?
Flash Player 11 won't install on my new Samsung 2 7 ICS tablet. Error 941. Any clues?
Could you try clearing your data and cache from the Google Play Store to see if that solves the problem?
On my system I go to: Settings->Applications->Manage Applications->All->Google Play Store, then I click the Clear Data and Clear Cache buttons. -
I have 3 downloads from yesterday that I receive this error code. Any ideas?
Thank you!I may have stumbled upon something that could help. A type of "detour" around the problem.
I just started experiencing this problem a few days ago. Anytime I'd try to download a song/video/movie, I would get the message, "Unable to check for available downloads. The network connection was reset".
So, instead of selecting "Check for Available Downloads" under "Advanced" menu...
I logged into "My Account" page in itunes. If there are available downloads it comes up at the top of the page with the option button "Download Now". When I select that -- it downloads immediately.
Can't promise it will work every time. But it's worked for me so far. Good luck... -
iOS 7.02 update made my iPad stay frozen on the appl logo. What's more, a factory update in DFU mode won't work either, I get error code 3194 - any tips on what I should do? It is an iPad2 on iOS 5 something, the one just before Apple removed YouTube...
iOS 7.02 update made my iPad stay frozen on the appl logo. What's more, a factory update in DFU mode won't work either, I get error code 3194 - any tips on what I should do? It is an iPad2 on iOS 5 something, the one just before Apple removed YouTube...
-
HT4528 my i phone four will not re-set it keeps giving me error code 1611 any ideas
my i phone four will not re-set it keeps giving me error code 1611 any ideas?
Turned out that I had to delete the password first before I could change it.
That's the first time I ever had to do that.
In the past it would just accept the password that I entered when asked for it.
Now I will remember - i hope! :) -
HT1918 So I changed my email address and got an error "invalid year" Any clues?
So I changed my email address and got an error "invalid year" Any clues?
Hi Stapleton2137,
This sounds like an issue with your security settings for your Apple ID.
If you are having issues with your Apple ID, the two articles below will help:
Frequently asked questions about Apple ID
Apple - Support - Apple ID - Manage Account
Cheers,
Judy -
Burning disc failed because communication to the disc drive failed. (error code 0x80020022) Any suggestions??
Sadly, that error has umpteen causes, sometimes the drive is going out, sometimes it's bad media, sometimes a slower burn works, & rarely a Cleaning Disc helps.
Bad File names can even cause it...
http://www.bbqiguana.com/2010/02/macos-x-error-0x80020022-trying-to-burn-dvds/ -
Since upgrading to ios 8.0.2, airprint will give error (no printer found" After a reboot, it locates and prints, then next time same error code. Any ideas?
Hi bdtcop,
I understand that you are experiencing an issue with AirPrint. Here is an article for you with some troubleshooting steps that may be helpful for resolving this issue:
About AirPrint
http://support.apple.com/kb/ht4356
If you're unable to print
Check these things if you are unable to print, or if you see the message "No AirPrint Printers Found."
Make sure your printer has paper, and enough ink or toner installed.
Make sure your printer is connected to the same Wi-Fi network as your iOS device.
Make sure your printer has power and is turned on. Try turning your printer off and then back on again to see if it resolves your issue.
Check to see if your printer has any error lights or indicators displayed on the printer's control panel. Check the documentation that came with your printer to clear any errors displayed.
Check with your printer's manufacturer to see if any firmware updates are available for your printer. Check your printer's documentation or contact the printer vendor for more information. A firmware update may be available, even if you just bought your printer.
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
While trying to copy my iPhoto Library (49.61 GB) to an external hard drive, I receive the error message "The Finder can’t complete the operation because some data in “iPhoto Library” can’t be read or written. (Error code -36)"
I need to move my library because I have no more disk space. This was going to be step 1 followed by backing up to another EHD.
More details: iPhoto version 9.6 (910.29) OX X Yosemite Version 10.10.1 (Mid 2011 Mac Book Air). EHD= WD Elements 1 TB (purchased at B&H Photo where the sales associate formatted it for a Mac).
Any step by step ideas for help are appreciated! I've read through a few threads but need more step by step directions.That error message is an I/O error which can mean a number of things, among them a bad file. Here's a couple of fixes you can try:
1 - use the free version of iPhoto Library Manager to rebuild the library with the rebuild being created on the EHD as follows:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.>Click on the Add Library button,
2 - select the library you want to add from those in the selection window.
3 - make sure that in the rebuild window the checkbox "Scavange orphaned photos" is checked.
4 - now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
5 - in the next window name the new library and select the location you want it to be placed. Click on the Create button.
Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
Note 2: Your current library will be left untouched for further attempts at a fix if so desired.
When iPLM finishes it will display a log file entry showing which files it was unable to use in the rebuild. Open the old library with iPhoto, locate and delete the photos that iPLM listed in its log. Then try dragging the library to the EHD again.
If the above fails continue with:
2 - create a new, empty library on the EHD. Use the paid version of iPhoto Library Manage to copy the events (1-2 at a time) to the new library on the EHD. At one point iPLM may run into the bad file and be unable to copy the event. You can check iPLM's log to see what file it is. Then open that library, delete the file and either try to copy the entire library by dragging and dropping or contine with the copying of events from the old library to the new library. -
i tried to do a software update on my iphone 3gs comes up with an unknown error message code 1015
any ideas?See this post:
TS3694 Trying to restore and update my iphone 3, the system tells me 1015 error What can I do? -
can anyone help me with the error code U44M1P7? thanks
Please delete the EM CS6 installation folder manually, then download and install the EM 6.0.8 from Adobe - Exchange : Download the Adobe Extension Manager
Maybe you are looking for
-
How to find out where I have used a certain Global/Local Variable
Hi Friends I want to track how and where the shared variable's value has been changed/Read when I try to debug the program. Anyone here had the expenrience on how to find a certain shared variable in the Block Diagrams/VIs. I will very appreciate yo
-
How to copy the responsible roles when copying tasks/phases ?
Hello, Currently when you copy a phase and paste it, it copies all the sub tasks, but doesnt copy the responsible role and responsible resource. I need to enhance the coding so that the responsible roles and resources of phases as well as the sub tas
-
More explaination needed about EJB issues published
when I read the part of "EJB issues" of the page http://otn.oracle.com/products/jdev/htdocs/readme_903Preview.html#viadcm I have several questions: first one: Invalid column name when the primary key in one table is different from the foreign key nam
-
OSX lion on iMac09 model - Recommended ?
Hi, I have a late 09 model Intel iMac with 2.66 Dual Core and Upgraded to 8GB Ram running 10.6. Recently i have been facing lot of issues with Disk persmissions etc and a drop in performance in general since i have been using this machine for extens
-
Is there anyway I can copy over a query to another data provider?