Garageband error message 8 bit

Garageband had been doing well for us, until the other day when sharing to ITunes, an error message saying, 'unsupported file type, files found at 8 bit...', and i've tried everything to change the file types even online, to reset preferences, including the 'audio midi' and so on. Still it says that this song, which had previously been successfully uploaded to ITunes, etc., and which we're now re-mixing, will not let us do anything as far as saving or changing to 16 bits and so on. What is going on, please? How may we fix it? Thanks!
basically: how can i send the song to itunes where it can be converted to an mp3, since the error message occurs 'wrong file type ..8 bit' when i try to send the newly edited song to itunes.
i have, which is not on the list, a macbook pro 10.5.8 and garageband 08 4.1.2

Dark1 wrote:
Some of my aif files are not recognized by any player for some reason. All I did was transfer to an external then back to my new hard drive after it was installed. Does anybody know what could happen to an aif file to not make it open?
Do your files have the extension showing? If not, you could experiment adding extensions like .aif, .aiff and see if that makes a difference, and also slide the files directly onto the Quicktime icon, forcing Quicktime to open it if it possibly can.
I was curious about this so I checked it out. The Wikipedia page lists a few issues that could cause problems:
http://en.wikipedia.org/wiki/AudioInterchange_FileFormat
Other than that, the only thing I can think of is file corruption.

Similar Messages

Unable to start bonjour. when uninstalling get error message 32 bit needs 64

I had trouble loading apple control panel. kept getting error message at installation that the install is a 32 bit, requires a 64 bit version
I went to bonjour as instructed but could find 64 bit version.
I then uninstalled bonljour printer but the install for control panel was the same
I uninstalled bonjour printer, and found another bonjour that apparently was installed in 2011. When I tried to unistall that program, I got the same this installer is a 32 bit, requires a 64 bit. I am unable to unistall bonjour and still cannot install control panel this is on a dell inspiron tower.

When deploying, the webservice .lvws file is stored in a the following location:
32-bit webservices on 64-bit win 7/win vista:
C:\Windows\SysWOW64\config\systemprofile\Documents\LabVIEW Data\WebServices\Standalone
64-bit webservices on 64-bit win 7/win vista:
C:\Windows\system32\config\systemprofile\Documents\LabVIEW Data\WebServices\Standalone
32-bit webservices on 32-bit win 7/win vista:
C:\Windows\system32\config\systemprofile\Documents\LabVIEW Data\WebServices\Standalone
Win XP:
C:\Documents and Settings\LocalService\My Documents\LabVIEW Data\WebServices\Standalone
If you do not want your web service to be loaded after subsequent reboots, you can clean up the .lvws files from these locations.
If you want your web service to be loaded only once after you deploy, you can uncheck the "Deploy as standalone Web Service" checkbox in the "Service Settings" tab of the web services properties dialog. You will need to rebuild your web service after making this change. This will make sure that the web service is NOT built as a standalone service, meaning that it will cease to exist once the instance of the process that deploys the web service exits (LabVIEW). Please make sure that you clean up your existing standalone web service completely before trying to deploy a web service with the name that is not standalone.
James
Senior Software Engineer
Web Technologies
LabVIEW R&D

Error message - 8 bit files?

I am trying to load a file but when it load I get an error message saying there are 8 files that cannot be played because they are in 8 bit format. However, ALL THESE FILES WERE RECORDED IN LOGIC. I know they worked at one time because I even bounced the project several times while I was working on it.
I would like to know how Logic would all of the sudden read files as 8 bits and how I might be able to fix it. Thank you for any help you may have!

CapM1 wrote:
Using v 9.1.7
Sometimes I start projects on my internal hard drive and move them to the external. I do not recall if that happened in this instance or not. But ihave done it before without issue.
All the recording files are in .caf format
Don't know what to tell you, I always use Broadcast WAV format. If Logic is showing the 8-bit message it almost always means it doesn't recognize or can't read the file "header". This is the part of the file that is a description of the content format, length...etc.
What have you upgraded since using this file? The operating system, Logic?
A possible workaround is to load the files into another program (Amadeus?) and resave them.. or....you might try importing one of them into Logic (as a test) and see if it could be resaved or saved in a different format like aif or wav.

New Error Message 64-bit

I installed iTunes 7.5, and there's a new error message when I connect the phone/start iTunes. It used to say use 32 bit version of windows. Now it says:
The iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes.
This sounds like there should actually BE a 64-bit version of iTunes, but I don't seem to be able to find it. Ideas?

No 64-bit version has been released that I've heard about or can find. The system requirements on Apple's iTunes web page still say that the 32-bit version of Windows is required. I can only guess that this is an error message that was intended for a future version (it certainly would seem to indicate that one is in planning/development) and that it's been inadvertently left in with phrasing that's currently not applicable.

Garageband error messages and it's really slow

When I try to open Garageband I get the message:
"GarageBand has detected a possible conflict between one or more third party MIDI or audio drivers."
Then I click OK a couple of times and it opens but it's super slow. This is only been since I upgraded to iLife'09. It worked fine before. PLEASE HELP!

what audio interface and MIDI keyboards and/or Controllers are connected or have been connected to your Mac?

Error messages from running Disk Utility

I just ran Disk Utility on my iBook, because it's been behaving erratically of late (e.g., no Low Battery message after a recent battery replacement; and the entire computer sporadically shutting down for no apparent reason, both before and after the recent battery replacement).
The Disk Permissions all tested OK. However, the Verify Disk test resulted in the following error messages:
Volume Bit Map needs minor repair
Invalid volume free block count ... (It should be 7168572 instead of 7168577)",2)
The volume iBook HD needs to be repaired.
Error: The underlying task reported failure on exit.
One iBook user (not sure how much experience & expertise) told me the hard drive needs to be replaced. Given that this computer has been in continuous use for over 5 years now, maybe he's right.
Is there a repair that will fix these problems? ... and if so, how? ... what do I need to do? Or, is it time to replace the hard drive?
We're very happy with this computer and would continue using it for several years more if these problems can be fixed without too much inconvenience or expense.
Thanks,

Insert the Mac OS X install disc.
Restart the computer while holding the C key.
When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
Click the First Aid tab.
Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
Select your Mac OS X volume.
Click Repair. Disk Utility checks and repairs the disk.

How do I install Elements for Windows 7 PC with 64 bit? Get error message - file archive part missing

We purchased Elements 12 and Premiere Elements 12 on September 7, 2014 and have tried a variety of things including searching through FAQs on the Adobe site, etc. etc. and cannot get our downloads to work. We are avid computer users and have never had problems downloading software before.
From our account under "orders" - I have tried clicking on the Akamai download manager and the Alternate Download Method on for each application with the same results.
We have a Windows 7 PC with a 64 bit operating system and Internet Explorer 11.
On all attempts we get an Adobe screen with 2 links – 1 for a file ending in .7z and a 2nd file ending in .exe.
I click on the first file and confirm the download completes at 100% (not paused, etc.) and is in the downloads folder for my user name on the PC.
I click on the 2nd link for .exe and I receive the error message below – 2nd screen shot – “file archive is missing” all folders/files must be in same folder.
So I see it’s a winzip file (as a winzip pop up folder had come up also) so I download the free version and unzip the files in the same downloads folder under my user name to try that.
I click on .exe file link again and same message. I tried copying the files directly to the downloads folder (as they all unzipped into a subfolder called PSE 12 and tried clicking on .exe again but get the same message.
For Premiere I tried the same and got same results on the 64 bit version download.
I do not know how to access the software we purchased.
Any help or advice is appreciated.
Also - if anyone knows how I can contact Adobe for a full refund so I can just buy the boxed software instead - that would be helpful as well as that is not easy to find online either.
Thanks!
Ariel

I get an error message saying that the quicktime installer will only work on 32 bit
The QuickTime player works on 64-bit systems. (It's a 32-bit application, but it should run fine using the standard 32-bit-on-64-bit Windows-on-Windows emulation.)
What's the precise text of your installation error message, dc? (There one or two different ones I can think of that might mention 32-bit)

How to install InDesign CS6 from disk on a Windows 8.1 (64-bit) PC when installation fails after the first initialization of installation program, without error message?

I have a (legally purchased) disc with InDesign CS6 that I want to install on a PC with Windows 8.1 (64-bit). After I've double-clicked the Set-up.exe file on the disc, a box is displayed showing the progress of the initialization of the installation program. When the coloured bar in the box is full – indicating that this step is completed – the installation stops and nothing more happens. No error messages are displayed.
I can't find any useful instructions in the Adobe Help pages more than a note that there is support for also Windows 8.1 even though the system requirements printed on the disc box only lists Windows XP and Windows 7. I don't know how to make this work. Does anybody here have any suggestions? I'd be ever so grateful for any tips.

Thanks, Jeff! The file Adobe Setup Error.log contains the following information:
02/14/14 07:20:26:474 | [INFO] | | OOBE | DE | | | | 8860 | DEVersion: 5.0.0.0
02/14/14 07:20:26:475 | [INFO] | | OOBE | DE | | | | 8860 | Loading library from C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\DE5\Setup.dll
[    8860] Fri Feb 14 07:20:26 2014 INFO
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
CHECK : Another Native OS installer already running
Create Required Folders
Assuming uninstall mode
Lookup for master payload
[    8860] Fri Feb 14 07:20:26 2014 ERROR
DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
[    8860] Fri Feb 14 07:20:26 2014 INFO
:: END TIMER :: [Total Timer] took 6.90443 milliseconds (0.00690443 seconds) DTR = 579.338 KBPS (0.56576 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s), 0 warning(s)
ERROR: DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
Exit Code: 33 - The product is not installed, cannot uninstall.
Please see specific errors and warnings for troubleshooting. For example, ERROR: DW040 ...

I just downloaded Itunes 11.1.4 (64-bit) and am running Windows 7, Itunes will not open and I get an error message about Microsoft runtime and I get an error R6034 and 1114 which says Itunes was installed incorrectly. Can anyone help?

I just downloaded Itunes 11.1.4 (64-bit) update and am running Windows 7. Itunes will not run after installing this update and I receive an error message R6034 on Loading Microsoft C Runtime Library incorrectly. Also Error message 1114 the Itunes Installer was installed incorrectly. Is there an new update for this problem? Is anyone else having this problem? Please help. Thanks.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99425)

HT1349 Trying to install latest iTunes for Windows 7 64-bit. Keep getting this error message "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services."

Initially iTunes would not run although it had been running quite well up until now. Suddenly received this error on PC start-up "The program can't start because MSVC80.dll is missing from your computer. Try reinstalling the program to fix this problem." Research on Net pointed me to iTunes as the issue. Tried to start iTunes and received that message again. Tried installing latest version of 64-bit iTunes and received the subject message part way through the install: Trying to install latest iTunes for Windows 7 64-bit. Keep getting this error message "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services."
iTunes has been running great on this PC for years. What's up?
Ron

See Troubleshooting issues with iTunes for Windows updates.
tt2

Error message: "application.exe has stopped working" under BEX event name on Windows 7 64-bit.

I am trying to run a third party program on my Windows 7 64-bit. It has an executable file.
1. When I double click on this file (appname.exe), I will see a GUI window.
2. In this GUI window, I will have to select a dynamic link library file (appDLL.dll) to load into the appname.exe that will run the application. This DLL file is compiled in Visual C++ 2010 Express based on a C source code under the Release Win32
mode.
3. It is supposed to run after step 2. Instead it give the BEX error message saying "appkernel.exe has stop working." There is no online solution at this time when I select that option to search for an online solution.
I can run this program on my Windows 7 32-bit computer. What does this error message mean? Why is there an issue like this on Windows 7 64-bit? How can I fix this issue? The detailed description of the problem is below.
Problem signature:
Problem Event Name:   BEX
Application Name:    appkernel.exe
Application Version:   0.0.0.0
Application Timestamp:   4f06397d
Fault Module Name:   MSVCR100.dll
Fault Module Version:   10.0.40219.325
Fault Module Timestamp:   4df2be1e
Exception Offset:   0008af3e
Exception Code:   c0000417
Exception Data:   00000000
OS Version:   6.1.7601.2.1.0.256.1
Locale ID:   1033
Additional Information 1:   81c8
Additional Information 2:   81c8f46ed31e8fb8b45fcb166d97e96d
Additional Information 3:   eec1
Additional Information 4:   eec16e1825ff7aa9948f00b1f285bbaa
Thanks in advance!
LDL

Hi Brian,
Thank you for the reply!
The third party software provider wrote the source code in C. When I compiled this source code, the DLL file will be created in store in the Release folder in the same project directory of the source code.
I just double check my computer, I have the following Visual C++ packages installed on it:
1. Microsoft Visual C++ 2005 Redistributable
2. Microsoft Visual C++ 2005 Redistributable (x64)
3. Microsoft Visual C++ 2008 Redistributable - x64 9.0.21022
4. Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.17
5. Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148
6. Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.6161
7. Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.4148
8. Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.6161
9. Microsoft Visual C++ 2010 x64 Redistributable - 10.0.40219
10. Microsoft Visual C++ 2010 x64 Runtime - 10.0.40219
11. Microsoft Visual C++ 2010 x86 Redistributable - 10.0.40219
12. Microsoft Visual C++ 2010 x86 Runtime - 10.0.40219
13. Microsoft Visual C++ 2010 Express - ENU
14. Microsoft Visual Studio 2010 Service Pack 1
15. Microsoft Visual Studio 2010 Express Prerequisites x64 - ENU
16. Microsoft .NET Framework 4.5.2
17. Microsoft .NET Framework 4 Multi-Targeting Pack
From what I understand the Visual C++ 2008 Runtime is included in the Redistributable package.
Leo

Why do I get an error message in safari 5.1 telling me to restart in 32 bit mode in order to "view the movie" when I first start safari on opening page?

why do I get an error message when I start safari 5.1 telling me I need to open browser in 32 bit mode in order to "view movie" ? This occurs when I start safari on the opening page (the page with all the boxes for most viewed web sites). This had never occurred with safari up until the latest updates to safari & OSX [Version 5.1 (6534.50)] and OSX 10.6.8.
also, I'm not trying to view a movie - this occurs for the page previews that load when safari opens.
thanks.

go here:
http://get.adobe.com/shockwave/otherversions/
choose "different version">full 64 bit and download - seems to have solved probem...let you know if it happens again

Error message on file created in garageband

I tried to open a file recorded in garageband and got an error message that said, "The file couldn’t be opened because it isn’t in the correct format. The file might be corrupted, truncated, or in an unexpected format."
I need to listen to this file today for a class (it was an interview with someone that i did for a project and i cannot re-do the interview), but it won't open. The file extension still says .band so I don't know what the problem is. I did earlier accidentally try and open it using itunes, but it doesn't show that it changed anything in the file.
How do I access this file?

how would I do this? When I look at the package contents, the only thing in there is a folder called "output" which contains a file called "Output.aif"
I don't understand how this happened, all i did was try to open the file in the wrong program on accident. I really need this for a class and will pretty much be screwed if I can't get it. Is there anywhere else where I could just find the sound file? I didn't even do anything fancy with it, just recorded and saved

I have the lastest (10.7) I tunes software running on a 64 bit windows 7 system. Today it stopped running all of the tv shows I have downloaded. The error message says that a "problem has stopped i tunes from working and windows is shutting it down" ?

i have the latest (10.7) itunes installed on a 64 bit Windows 7 based system. Up unitil today I had NO problem running the TV shows that I have downloaded from I Tunes.
Today it stopped running all videos. It loads the information in the top box about length & name. An error message pops saying "an error has caused I tunes to stop working". "Windows will check for a solution and notify if therer is a solution."
Music plays fine so i know that something works on itunes.
Any ideas?

Try the following user tip:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

Get error message when trying to launch bridge from CC 64 bit.

Get error message when trying to launch Bridge from Photoshop CC 64 bit. "Cannot complete command because extension cannot be loaded." Need fix. Thanks.

Hi Adobe Bubba,
Please uninstall the software, run the cleaner tool, restart your machine and install again.
Cleaner tool: http://www.adobe.com/support/contact/cscleanertool.html .
Regards,
Romt Sinha

Garageband error message 8 bit

Similar Messages

Maybe you are looking for