Garageband has become totally unusable
Does anyone else find Garageband likes to lose files on a regular basis, AND/OR swap sequences in your projects without you asking it to?
I've never experienced it, but I have read comments from others in this forum that have. I have had some files go missing in iMovie though. What saved the day was going to a backup that still had all the files. If you're experiencing something similar with GB, short of a real answer, I'd recommend that you too make sure you backup your files so that you could always restore from them should one go missing.
Similar Messages
-
Spotify on Windows Phone 8.1 has become practically unusable
Hey Folks, I've had this problem for a long time (many many months) and have been too lazy to post assuming that this is a issue affecting loads of others and that it would just get sorted but I've come to the point where I really need to find out what is happening. I absolutely love Spotify and use it reuglarly on my ipad and windows phone however my love affair with Spotify on my phone ispractically over. The app has become really unreliable and more often than not...unusable. Often it takes forever to load and I just see the scrolling (loading) green dots for ages before I give up. Ages being 5-10 minutes before I lose interest. Assuming I do get in, I then go to my playlists and the whole thing happens again, more and more scrolling which sometimes results in the playlists being revealed or again i just simply give up. If I do get to a playlist, I will select it....cue more scrolling whilst it tries to load the track lists which invariably never happens. Art work, none existent and if I do manage to play one track, the rest of the tracks on the album fail to get listed. If I even dare to go back to look at the playlists again, the whole thing starts over. It can literally take me twenty minutes to get round to playing one track! You'd think that this might be the sort of behaviour you'd get in a area of bad signal but this happens when i'm at home using my 50mb wifi and despite being connected to my wifi, which is reliable on all my other systems, I often get the message saying that Spotify is offline or can't connect to the network. I assume that this isn't a problem with my phone and is affecting others out there but it's become intolerable and since i pay my monthly premium Spotify subscription I expect a product that works. I understand that things get glitchy but this has been happening for the best part of the year and I really should now cancel my payments. If the problem gets fixed then I'd gladly sign up again and pay the fee but at the mo I'm not sure what I'm paying for. I never have this problem with the app on my ipad so clearly this is a windows phone problem. I have tried deleting the app and resintalling but nothing seems to work. Could you guys advise anything else I can try or at least let me know that you're aware of the problem and are trying to fix it and let us know when an update will be sent out. I know this didn't happen when I first used Spotify over a year or two ago. Thanks :-)
Hi, So glad it's not just me that is having this issue. The app is virtually unusable at the moment. The thought of having to uninstall and then spend hours, maybe days, re-syncing is not something I'll consider. Just sent the following e-mail - I'll let you know their response. If they offer me 2 months free, I'll ask them to take the offer and place it where the sun don't shine. Premium is pointless if the app doesn't work!!!!! Hi, I hope you can help. I have been a Spotify premium customer for a fair while now, and up until recently, would have recommended you to anyone - in fact, I have done just that, many times. However, seeing as you seem unable to sort out the issues with the app on Windows phone, I feel our relationship is at breaking point, and that makes me sad. A summary of the issues I have.1) Speed - It would be quicker for me to go visit the band, ask then to set up their instruments and play a song for me than it is to start the app, and get to a playlist - even when connected to wifi. I have a commute of around 90 minutes, and about a 3rd of that is spent trying to get to a playlist and start it actually playing2) Reliability - quite frankly, this is a joke. When I eventually get to a playlist, try and open it, it crashes. Admittedly, these playlists are quite large (700+ songs) but it's now started doing it on smaller playlists (one in particular is 270 songs). Considering the amount if time it takes to get to a playlist, and the time I spend curating these playlists, the thought of having to break these down into smaller chunks is not something I am willing to consider at this point.3) Syncing - 48 attempts (yes, I'm that sad that I counted) to sync a playlist of 700 songs. Sometimes it just stops (seemingly randomly) and says 'pending'. I later found out that this is because songs on the playlist had been removed by the artist (yes, I'm looking at you Prince!!!). Once I'd fired up the desktop app, removed these from the playlist) and then re-opened the app on my phone (after it had crashed) it would start syncing again. And then stop. And then crash. Surely it could simply skip unavailable files rather than just stop. I'm really rather fed up. I love Windows Phone. It's UI is far better than anything Android or that other lot have come up with, it syncs with my other Windows devices, and the majority of the apps I use (with the exception of iPlayer) are pretty darn perfect. They work. They don't crash, nor take an age to load. So please, please, please tell me that a) you are working on a fix, and b) that you will treat us Windows Phone users as equals. Some of us are normal. You'll probably ask for these so here are my detailsPhone - Lumia 640 (was the same on my old phone - a Lumia 920)OS - Windows Phone 8.1 Update 2 (8.10.15148.160)Spotify Username - rm4rml I don't want to move to one of the rivals, as I've been a Spotify user for as long as I can remember. I love it like a child. We've been through a lot together. Some good times (Prince adding all his music) and some bad times (him taking it all off again), and the offline access is essential to my experience. Thanking you in advance.
-
i find this to be very annoying and i am suspecting i will have to take my Macie to get repaired i was just wondering is anyone else has any similar problems i find this very annoying and i am not all too sure how it has begun to happen due to the fact that i have NEVER dropped or done anything to harm my macie and well i do not understand why this is happening i mostly use my computer while sitting at a desk so i do not understand but oh well i am rambling on please if anyone has had a similar problem do share.
If your screen is flickering, you might have a hardware issue there. I would take Macie to the doctor and have her checked out.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
My Iphone 5 has become nearly unusable since 8.02
Since 8.02 was updated on my IPhone 5 most of the apps take 4 or 5 attempts to respond, sometimes they don't and I have to switch off and switch on again and then they don't always work..... anyone had this problem? Getting really fed up with it now.
Hi brasik,
Thanks for visiting Apple Support Communities.
It sounds like you've updated your iPhone 5 to iOS 8.0.2, and now applications are unresponsive when you try to launch them. That's an unexpected result of updating, and I can definitely see how it's frustrating.
Since the situation stays the same after restarting your phone, I'd recommend another step to help isolate the issue.
As mentioned in the troubleshooting guide iOS: An app you installed unexpectedly quits, stops responding, or won’t open, try reinstalling one of the apps that isn't launching.
Delete the app.
Press the Home button.
Go to the App Store and download the app again.
Wait for the app to download, then open it from the Home screen.
If the download stops, you can resume it.
If Apple applications (such as Mail, Newsstand, or Safari) are becoming unresponsive, I'd recommend backing up and restoring iOS using the steps in this article:
Use iTunes to restore your iOS device to factory settings
Best Regards,
Jeremy -
I am using windows XP, and have a DSL connection that is not very fast. I think the new version of Firefox may be too complex and have too many things going on for my connection.
The last version worked flawlessly. I had no problems until updating to Firefox 4.0.1, but now I can barely use it.Try a new Profile.
http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows -
The App Store recently has become quite unusable:
- no more "Latest iPhone Apps" category
- no more "Latest free Apps" category
- "New" panel doesn't show the latest Apps in the current category
- especially in the category "Games" there's no way to see the latest Apps
- Apps updates don't show up as new releases anymoreYep. Use this feed in your browser to see the new apps:
feed://appshopper.com/feed/?filter=new
I'm not going to the app store anymore. The main reason I was going in the app store was to see the new apps, and now Apple has remove the link. After the downgraded update of iMovie, it's the second stupiest move from Apple. -
Hello I have recently been having problems with notes and it has become completely unusable although it opens okay when I try to edit or delete a note it just crashes I have no idea what is causing this I have unchecked the boxes from iCloud but it is always the same I think it needs a complete reinstall
I'm running mountain lion version 10.8.2
Any help would be greatly appreciated
thank you
BarryThis issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Safari has become unusable—it freezes, links are unclickable, then I get "Web pages are not responding..."
Safari has been my favorite browser for a long time. Nothing against the others but I have found it faster and better. Now I can really no longer use it. This has been going on and getting worse for atr least few weeks. Anyone know why?From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
If any extensions are installed, disable them and test. -
t has become unusable I have deinstalled it and reinstalled. NO VIRUS, NORTON'S REPORT.I am a drag racing photographer, shoot RAW exclusively and thouands of photos. Right now I'm switching to Corel' s After Shot 2 so I can ge my photos processed. HELP, HELP, HELP I'm going down for the 3rd time!!!
t has become unusable I have deinstalled it and reinstalled. NO VIRUS, NORTON'S REPORT.I am a drag racing photographer, shoot RAW exclusively and thouands of photos. Right now I'm switching to Corel' s After Shot 2 so I can ge my photos processed. HELP, HELP, HELP I'm going down for the 3rd time!!!
-
Safari 4x has become unusable!
I've been using Safari since 2005 and have loved it up until v4. It's always been blazingly fast and stable.
Since v4.0, and with every update since, Safari has been getting slower and slower, more unstable (crashes where it never crashed before v4) and some pages just refuse to load but stall out.
I have tried Open DNS like this forum has suggested. That seemed to really help the page loading with 4.1.1. But Safari has kept crashing. A lot (and yes, I send in the reports).
I still use Open DNS and now with the new 4.1.2 I am back again to slow page loading. Today I clicked on a site, waited 20 seconds while watching the beach ball spin, decided to launch Camino, and Camino launched and loaded the page while Safari kept spinning it's wheels. Lately I've been using Camino more and more. It reminds me of the Safari of old.
What gives? I'd really like to know. I see the app size getting bigger and bigger for Safari (currently 79 MB) while the svelte Camino comes in at 47 MB and Firefox at 53 MB.
Oh and please don't tell me about "third party add-ons". I don't have any. Nothing has changed in years except for the updates to Safari, and v4 has become unusable for me. I've also got the latest Java, Flash etc. and I make sure everything is always updated with the latest software.
Is anyone else experiencing this? Is it my PBG4? Why do other browsers perform better for me while Safari has slowed down and become so unstable?HI,
But Safari has kept crashing. A lot (and yes, I send in the reports).
Good thing to send in the reports, but if you want help to stop Safari from crashing, then post a crash report here so we can help you.
What gives? I'd really like to know. I see the app size getting bigger and bigger for Safari (currently 79 MB) while the svelte Camino comes in at 47 MB and Firefox at 53 MB.
Safari works with iTunes, so yes, the app size will increase where third party browsers aren't effected.
If Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash information.
Now copy/paste the entire contents of the Crash Reporter window into your reply here. If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.
I see the app size getting bigger and bigger for Safari (currently 79 MB) while the svelte Camino comes in at 47 MB and Firefox at 53 MB.
How much free disk space on your PBook? Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you always have a minimum of 10% to 15% free disk space at all times.
Carolyn -
IPhone 6 has become unusable, update didn't solve it. Random crashes etc
Hi all,
My iPhone 6 has become unusable.
apps keep crashing, e.g. the native Mail app won't even open.
Whatsapp doesn't show pictures sent
Other apps e.g. web browser Open then bounce straight back to the home screen
There was an update waiting to be installed, the latest iOS version so I tried that but it was in vain.
Any ideas on what to do to resolve this please before a cumbersome factory reset?archon522 wrote:. There is obviously an issue because there are multiple reports of performance issues with Netflix traffic, and it's only coming from Verizon customers.
That is simply not true. There is a 10+ page thread on this very same subject in the Comcast forums on DSLR.
Some customers on every major ISP in the US (Comcast, TWC, FIOS) are openly complaining about Netflix issues. From what I can tell it depends where you are and time of day. The ISPs are letting their CDN ports get saturated and are making no moves to fix it. Kind of makes sense when you consider they all have video streaming services of their own and that they compete with Netflix.
Other people think this is a Netflix issue...i.e. if all the ISPs are having issues with Netflix is must be Netflix's problem.
The ISPs have been remarkably quiet on this issue. The only recent post I have seen anywhere is in the Comcast Forums:
"We are aware of these threads and the concerns expressed here. We are actively engaged. It is sensitive and we can't really say more than that right now.
JL
National Engineering & Technical Operations"
http://forums.comcast.com/t5/Basic-Internet-Connectivity-And/Is-comcast-working-on-the-Netflix-issue...
So take it for what you will. IMHO this is about all about money and the ISPs are to blame.
Having said all that, CableVision is the one of the very few that joined Netflix OpenConnect, so if Netflix is that important to you moving to them is a very good idea. Most people don't have that option.
https://signup.netflix.com/openconnect -
TThe touch pad on my MacBook has become hypersensitive as well as unresponsive. I have restarted numerous times only to have the inability to log on. I can't select the user, hence I can't enter my password. what do I need to do? Recently installed a few updates but can't tell you more, as I can't get any further than the user screen What has caused this? Help!
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
My Macbook Pro has become slow
10.6.7
Model Name: MacBook Pro
Model Identifier: MacBookPro4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 800 MHz
Recently my Macbook Pro has become sort of lagging. The lagging is sort of intermittent, but is possibly becoming more frequent. Sometimes when I type, it takes a while to catch up and gives me the rainbow wheel mouse while this happens. I have been getting the rainbow wheel thing a lot lately due to lagging in typing or clicking a link and it takes (seemingly) forever to load (based on how fast it used to be). Sometimes when I scroll using the trackpad (my main method of scrolling), it takes a while to actually scroll. When I open a new tab, what should be my top sites sometimes is a distorted/pixelated picture of black or black and white or whatever was on the screen previously. I am also having a lot of flash problems: I'll be using the internet and then randomly the flash will just close and I'll get an apple pop-up saying that my flash program unexpectedly closed and I should send a report to apple. I refresh the page and the flash is working fine, but the closing will still randomly happen. I use my macbook pro mainly for internet use and microsoft office use since I am a student. This only started recently and I haven't used any microsoft office products since before this started so I have really just been using Safari (it's been a while since I've used firefox also). Therefore, I don't believe an application is causing this. As I am typing this, I ran a software update and found that 10.6.8 is available. I think I will hold off until I get a few responses on this discussion. This computer is JUST over three years (my extended warranty just ran out... of course).
Thank you for reading my post. I greatly appreciate any help I can receive.
SamRun ALL of the free OnyX maintainence and cleaning aspects and reboot.
Run OnyX > Verify > Preferences and write down any corrupt ones, move them to your trash and reboot
http://www.titanium.free.fr/
Check the status of your browser plug-ins here and update.
https://www.mozilla.com/en-US/plugincheck/
Use Firefox, it's faster and more secure browser with tons of great add-ons.
Use the free LibreOffice, it will read all your OfficeMac files, is better written than Microsoft's buggy stuff, more secure too. -
My Macbook Pro has become super slow after upgrading to 10.9.2. can anyone help please?
My Macbook pro has slowed down drastically after upgrading to 10.9.2. It has become so slow that i can hardly use it. I did an etrcheck
Hardware Information:
MacBook Pro (13-inch, Mid 2012)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 4000 - VRAM: 1024 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 0 days 0:19:10
Disk Information:
APPLE HDD TOSHIBA MK5065GSXF disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (356.27 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
Launch Agents:
[System] com.hp.devicemonitor.plist 3rd-Party support link
[System] com.hp.messagecenter.launcher.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
User Login Items:
iTunesHelper
Dropbox
AdobeResourceSynchronizer
Internet Plug-ins:
FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
Silverlight: Version: 5.1.10411.0 - SDK 10.6 3rd-Party support link
Safari Extensions:
Adblock Plus: Version: 1.7.4.1135
Ebay Shopping Assistant: Version: 1.1
Amazon Shopping Assistant: Version: 1.1
Slick Savings: Version: 1.0
Searchme: Version: 1.3
AdBlock: Version: 2.6.18
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player 3rd-Party support link
Old Applications:
None
Time Machine:
Time Machine not configured!
Top Processes by CPU:
29% Safari
16% com.apple.WebKit.WebContent
5% PluginProcess
4% WindowServer
3% com.apple.WebKit.Networking
Top Processes by Memory:
289 MB Safari
131 MB com.apple.IconServicesAgent
82 MB com.apple.WebKit.WebContent
82 MB mds_stores
66 MB Finder
Virtual Memory Information:
721 MB Free RAM
1.62 GB Active RAM
1.05 GB Inactive RAM
636 MB Wired RAM
1.18 GB Page-ins
0 B Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.evenflow.dropbox com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Broadcom|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^\(.+\) //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm "TCP/IP"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`find . -maxdepth 1 -exec basename {} + | while read f; do [[ ("$f" =~ ^\.. && ! "$f" =~ ^\.(adobe|android|bash.+|CFU.+|cache|config|cups|dropbox|DS_Store|filezilla|font.+|git.+|profile|rnd|sh_.+|ssh|subv.+|Trash(es)?|zprofile|zsh.+)$) || ($(stat -f%f "$f") -ge 32768 && "$f" != Library) ]] && ls -Fd "$f"; done`; Pm "Hidden user files"; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
I have no idea whether there is a causal relationship but since moving to Lion and iCloud, my iMac has become so unresponsive that I wind up having to crash and restart most of the time. This is true regardless of the app I am using at the time.
The specs of this iMac are:
iMac 27 inch, late 2009 model with a 3.0 GHz Intel Core 2 Duo with 4 Gig 1067 Mhz DDR3, using OSX Lion 10.7.4 (11E53)
I have Mackeeper installed and according to the scans I have run, everything is fine. No virus, no junk files . . . no problems at all . . .
Except that for all practical purposes, my computer isn't working.
I am nearly totally deaf and live in an isolated, rural area of NW Missouri and this computer is what I mainly rely on to contact friends, relatives and business associtates!
Any and all suggestions will be greatly appreciated!First, back up all data immediately, as your boot drive may be failing.
If you have more than ten or so files or folders on your Desktop, move them, temporarily at least, somewhere else in your home folder.
If iCloud is enabled, disable it.
Disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable. Launch the usual set of applications you use when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Step 2
You must be logged in as an administrator to carry out this step.
Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.
Maybe you are looking for
-
Can I have two itunes accounts on one laptop
Can I have both my husbands and my account (2 seperate ids) on one laptop
-
BAPI_PO_CHANGE Changing line Item
Hi All, My requirement is like this I need to changed line item of a purchase order using BAPI_PO_Change is it required to pass header data other than po Number?I have to change only the Batch Number(POITEM-BATCH) can some body throw some idea on thi
-
Web Service Client - SOAP/jms: Specific response queue (not default queue)?
Hi @ll I try to define a specific jms response queue for a web service client that communicates SOAP/jms, running on a WLS 9.2. The web service itself runs also on a WLS 9.2 where also the request and response queues are located. By default the clien
-
Can i still play my show/movie while browsing
i would like to know if there is a way to browse through the apple tv channels and libraries while still playing the show i am watching
-
Easy DMS - problem with object linking (unicode client)
Hi Gurus, I have a problem concerning linking a materialmaster to a DIR in a uniciode environment. I tested following scenarios: 1) Easy DMS 6.00 SP10 non unicode + non unicode Backend --> no problem 2) Easy DMS 6.00 SP10 non unicode + unicode