Garageband - I set it up but it is not recording

I am transfering an audio to a CD on garageband. When I press the Record buttom and play the tape recorder, it does not seem to be recording the input to the computer. The play head moves across but the red bar does not indicate recording.

I am transfering an audio to a CD on garageband.
I don't know what that means. You will have to tell us a lot more about your setup. And what you mean by "the red bar".

Similar Messages

I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?

I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?

I have had this same problem for weeks now with my 4S. I just got a new 5S after being extremely frustrated and the same thing - no sounds. After searching posts all over, I couldn't find a solution. I just told my friend of the issue and he asked "Do you have the Do Not Distrub on?" I didn't even know such a function existed. Upon looking that was exactly the issue.
To resolve, go to Settings> Do Not Disturb> Manual. If it is green, turn it off. You will now get phone calls and text alerts.
This functionality is also on your quick access utility menu (slide up menu). I assume this is how it was enabled on my phone.
I will post on other sites since I searched for weeks for this solution and didn't see it anywhere. Good luck!

I have a g4 running os10.4.11, i bought a epson workforce 1100 and tried to set it up but there is not a listing for it when i try to add it before installing the driver software from the supplied cd...anyone know what i can do to get it set up?

i have a g4 running os10.4.11, i bought a epson workforce 1100 and tried to set it up but there is not a listing for it when i try to add it before installing the driver software from the supplied cd...anyone know what i can do to get it set up?

Load the drivers and you should then be able to add it in Print Center.

How to save passwords. Setting already selected but still does not save.

How to save passwords. Setting already selected but still does not save. Web site does allow password saving.

Could you try a fake username and password on another site, and see if you can save there? You can use this website's login form at [https://support.mozilla.com/tiki-login.php] to test.
Let me know the result of doing this, and whether any password-related errors appear in Tools->Error Console

When I upgraded my MacBook to Lion the trackpad switched and now up is down and down is up. I tried to fix it in setting, track pad but I do not see an option. Is it somewhere else in settings?

When I upgraded my MacBook to Lion the trackpad switched and now up is down and down is up. I tried to fix it in setting, track pad but I do not see an option. Is it somewhere else in settings?

You are very welcome...there are many little boxes to check/uncheck...can be a real challenge to read all of the fine print

HT2729 I have purchased a new iPod Nano and have tried to set it up but itunes will not recognise it. I have 5 other devices linked to my itunes account so is this the problem and what should I do?

I have purchased a new iPod Nano and have tried repeatedly to set it up but iTunes will not recognise it. I have 5 other devices connected to my itunes account so is this the problem and what can I do?

There is no 5 device limit. There is a 5 computer limit.
Device not detected in iTunes

Itunes thinks my iphone 4 is new, and asks to set it up, but it's not new, what should I do

Hi everyone
Recently, itunes started popping up periodically saying that my iphone is new and asks me to set it up or to restore from backup, but it's not new, this happens both on wifi and when connected via cable, I have no idea why this is happening and don't know how to fix it.
What should I do?

Resetting didn't affect anything.
I haven't done anything different or changed the library. Like any other day, I just took it off of the cradle this morning, went about my business all day and put it back on the cradle when I got home. But now, instead of synching, it says "This computer has previously been synched with an iPhone or anohter iOS device" and wants me to restore from a backup.
The backups it is showing me (there are 4) look suspicious because it says "last backed up: 10/16/2011 8:18 PM" but I set iTunes to back up the phone every time I dock. So something is definitely not right with the backup. Consequently I don't want to restore from backup until I know what happened to the latest backup.

Set up Mobile, but users can not authenticate

I have set up a iPrint Mobile appliance, have AirPrint and Email printing working to non-secured printers.
When I try to LOGIN with the iOS iPrint client, I can only LOGIN with the Admin user, not any of the users that I have imported with LDAP (from eDirectory)
Trying AirPrint, when I click on a secure printer, it will not acknowledge, just blinks and will not select
It appears to me that the password does not get brought over to the iPrint appliance on the user import, so users can't authenticate.
Any ideas on what more test to perform, or what the issue may be? I should be able to print to secure printers right?
Colin.

OK, appreciated, I'll try and find an iOS 6 device and test with that.
About email printing: When I send a List Printers command, it does not list any of the secure printers. So is it correct that printing by email to secure printers is not supported? Can't see anything on that in the docs, though it makes sense from authentication point of view.
Colin.
Originally Posted by jmarton
chill wrote:
> However, still not getting any change on AirPrint to secure printers.
> Is that possible? What should happen when selecting a Secure printer
> for AirPrint?
Secure printing should work with iOS 6 devices, but I don't believe
it's currently working with iOS 7. This is the only note I see in the
docs which doesn't mention iOS 7.
http://www.novell.com/documentation/.../b152nrhq.html
I'll try to get verification.
Your world is on the move. http://www.novell.com/mobility/
We know what your world looks like. http://www.novell.com/yourworld/

My ipod nano (5th gen) has a lock icon in the upper left hand corner of the screen. I have accessed itunes and re-set the ipod but it has not changed. i cannot access the ipod at all. any ideas please?

I have also tried all the recommended 5 steps, but it doesn't respond. when connected to itunes, it will cahrge and update. but no response on its own.

No, you will have to replace the switch or do an out-of-warranty replacement at an Apple Store.

How can i make firefox open to home page instead of "new tab"? My setting are correct, but it will not open to the home page.

No matter what I do, Firefox will not open to my home page. It always "new tab".
Any help would be appreciated.
Thanks
Harold

You can try to delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] in case session restore tries to open an older session.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
See:
* http://kb.mozillazine.org/Session_Restore

OpenScript is able to open Recording window, but, it's not recording

Hi,
I am very new bie to this forum and for automation tool like OpenScript9.0 as well.
I happen to work on the above tool, so I could installed it and trying to record the web application for the Load Test, but after completion of the recording I STOPPED the recording then web page has been closed and but OpenScript never added the captured info.
Kindly assist me where Im doing wrong/going wrong.
Thanks in advance,
CB

At the appropriate place in the Action, go to the Actions panel menu (top-right button) and pick "Insert Menu Item..." then select the grid hiding command.
Or did you do that and it didn't work?

Need my action to hide the grid, but it's not recording it

Hi!
My question is simply this:
Is it not possible to hide the grid as part of a Photoshop action? When I perform that step, nothing gets recorded.
Is there any way around this?
Thanks!

At the appropriate place in the Action, go to the Actions panel menu (top-right button) and pick "Insert Menu Item..." then select the grid hiding command.
Or did you do that and it didn't work?

Using Garageband and I cannot hear previously recorded tracks on headphones. Prefs are set to output on EMU0404 my audio device - this did work but now is not working.

I am using Garageband and I cannot hear the previously recorded tracks on my headphones. I am using an audio input/output device, EMU0404 - this was previously working fine but stopped. All cables check out OK and so does the unit - I have updated to the latest version of Garageband but this did not help. Any suggestion?

Hi Christoph,
I cannot see anything wrong with the EMU0404. This is what puzzels me ... Garageband looks OK - headphones are OK - EMU looks OK.
Thanks anyway
Paul

How can I set the DEFAULT setting on an effect to be MY default setting, not Garagebands default setting?

Hey
I usually use the same settings of reverb for most vocals I record (Just a small amount) and I have this saved as a setting, but is there anyway to make MY setting be the default setting whenever I add reverb and not be Garagebands default reverb setting?
This is so i dont have to go and select my setting each time?
I hope this makes sense.
thanks

This is more for mixing after all recording has been done. I generally record vocals with no effects on at all apart from a small amount of compression as its easier to hear errors in takes then. Currently its quicker than Cmd+D and copy/pasting into it. But still not as "Fast" as I would like by being able to choose myself what I always want as the default setting.

I recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and

i recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and they are set as they should be. I tried it in all the other older projects and same issue anyone have any experience like this very frustrating. Can one download old version still ? or can you run both versions on OS10.9.5 ?

Ok, either my question was too long or nobody seems to have an answer. Sad, either way
Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
Two questions, every idea would be great!
- Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
- Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
Thank you again,
Joern

Garageband - I set it up but it is not recording

Similar Messages

Maybe you are looking for