Garageband loops not showing in FCPX's Sound Browser

Help plz. My Garageband loops are not showing in FCPX's Sound Browser.. Although they are there on the hard disk... Thanks

This is the path for Mavericks, but I think it's the same for Mt Lion. Is that where they are for you?
Russ

Similar Messages

My downloaded text sounds do not show up under the sounds tab in settings after installing 8.1.1. can someone help me please?

i downloaded a couple text tones and since installing 8.1.1, they will not show up under the sounds tab. in fact, they do not show up in my recent purchases on itunes, but when i go to buy them again, it says that i have already bought this tone. I just want to use the tones i paid for as the tones on my phone. not asking much.... thanks for the help. i hope someone can help me get the tones working. thank you.

This was happening to me too but only for some of my songs. I have a mac so I dunno about PCs, but for most of my ringtones I had to create an ACC version in itunes to make them short enough then turn that into a m4r and those all worked fine. But if the song was already short enough and I didn't create an ACC version and just turned the original into a m4r, then it wouldn't appear in my itunes.
so if you're on a mac:
1. go to get info, options, pick when you want the song to start and end.
     Has to be pretty short to work, 30 second or less is good
     if it's already short enough that's fine
2. right click and click 'create ACC version'
     a copy with the length you put in will appear, drag that into a folder or whatever and just type in m4r where m4a would be
     still make an ACC version even if it's the right length
Hopefully this helps someone else.

Compound clip imported into project not showing up in the event browser

I have learnt that when one imports any clip into the project from anywhere else other than its associated event folder, the new clip also gets automatically added into the event folder. I have seen this occur when I had imported audio from the music browser onto my timeline directly.
Today I happened to place a compound clip [a common template which I use for introduction to the video] onto the beginning of a project which I have started recently. I broke the compound clip apart and made the necessary edits. What puzzles me is that this compound clip has an audio clip and this clip was not being shown in the event browser. Is this normal?
Ps. I have very recently updated my FCPX from version 2 to 5.
DR.SOMANNA

Let me explain the matter in a different way...
I have made a compound clip of the intitial generator clip, titles and music clip which I had used for my first project. The intention to do so being that I could reuse the same for my future projects as well. I placed this compound clip in a new project which I named as templates.
When I had started upon a new project a few days ago, I copied and pasted this compound clip from the 'templates project' and added it to the beginning of the timeline of the new project.
Now, for purposes of editing the titles, I broke apart the compound clip and changed the text of the titles. Also, when I had ungrouped the compound clip, there did appear the music clip below the timeline. I know that clips imported from the generator browser and the titles that are added to the project do not show up in the events browser, but should not the audio clip make its appearance in the event browser? I know that when we add an audio from the music browser, this audio clip will be automatically shown in the event browser.
My question therefore is this: is an audio track that gets added to the timeline of a project via a compound clip that has been added and ungrouped on the timeline an exception to the rule?
Hope I have made myself clear.
DR.SOMANNA

I make changes on Contribute that do not show up on my firefox browser. They Do show up on my Safari browser

I make changes on my website using Contribute . Since I have downloaded the latest Firefox update, my Contribute changes do not show up on my Firefox browser. They Do show up on my Safari browser, so I know that Contribute is working fine.
Also, I can no longer locate the Refresh icon.
Help

You may need to reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)

Why are my five websites not showing up in my CC browser window - CC Account Panel?

Why are my five websites not showing up in my CC browser window - CC Account Panel?
I have a full account!
g

Gmpulaski which web sites are you referring too? Is it the five Business Catalyst sites included with your membership?

I am using a multiline textbox and the problem is its not showing vertical scrollbar in safari browser.

I am using a multiline textbox and the problem is its not showing vertical scrollbar in safari browser.

If you are having problems scrolling within a frame then you should be able to use two fingers within the frame to scroll

Loops not showing up at all in Garageband.. but are on computer...

Hey,
My loops are not showing up... however I don't have my CDs with me at Uni. However, I disovered by using Spotlight that the loops are actually on the computer in a folder called "Apple Loops for Garageband". They are in my user library and the garage band preferences are set to "share loops with this user only" or whatever the option is called - suggesting that it is correct for this folder to be in the User libray and not the main library.
However I don't even have grayed out samples - they just are not there at all.
I tried dragging one or two from the folder to Garageband manually and they copied over fine and are now in the sample library... however it won't let me copy them over all in one go for some reason...??
I have a lot of samples so don't want to do them one by one... so before I resort to that - any advice...?? Whats going on?
Thanks in advance.

hey, yea i've been having the same problem, just bought this new imac, and none of the audio loops are working (they all show up gray). i actully spent the time, clicking and draging each one individually, but guess what? not all the loops are there!!! i'm sooo cofused, if anyone has figured this out, that would be extremely helpful thanks!!!!

Garageband does not show loops in browser

Hi all,
I'm running 2.02 and I just downloaded the Jampack freebies from .mac. I installed as instructed (drug the loops to the loop browser), however, garageband does not 'see' the new loops. They are not in the loop browser. I checked help which explained that when they are drug into the loop browser the loop index gets updated. I'm not sure this has happened correctly. Is there a way to force the program to update the index based on what it finds in the library/Apple Loops directory?
Elsewise....any suggestions? I've tried restarting the program. I've hit reset in the loop browser, and I've made sure that the 'key filter' whatever parm in the preferences is not checked.
bigtiny

What you are seeing is the normal behavior of the program. If you create a song in C in 4/4 time you will see most of your loops. Garageband keeps them organized by key and time signature. I lose most of my loops when I make a song in 3/4 or 6/8 time and in a minor key like Em.
You can get more of them to show up by unchecking the filter option in the preferences:
1. Open Garageband
2. In the Garageband menu select 'preferences'.
3. In the general section of preferences uncheck the filter for more relevant results.
I have not discovered anything that will force loops to show up in unusual keys. Some of the drum loops should show up but don't. It is possible the loops were not given the 'any key' tag. Unusual rhythms also wreak havoc on the loops selection.
For this reason, when you make your own loops be sure to select all the parameters you want the loops to show up in.
Kurt

Garageband Loops Not There - Please Help!

Hi there,
About a month ago I had to replace the hard drive on my macbook. On opening Garageband today I found that the loops were all greyed out and when I clicked on them I was given the option of: Downloading them (basically a Software Update and nothing happened), leaving it or downloading from DVD. I tried to download from the DVD and it asked me to put in the OSX Install disk 2, which I did and when I clicked 'install' nothing happened. I then put in OSX Install disk 1 and re-installed garageband, got the most recent update and when I look for the loops there are none there, they aren't even greyed out they are just not there.
The only sounds that are available are:
Ambience
Animals
Booms
Explosions
Foley
Impacts
Jingles
Machines
People
Sci-fi
Sports
Stingers
Transportation
Work/Home
There are no drums or instrument loop there.
I'm stumped!
If anyone can help me that would be fantastic.
Jonny

I have tried to Install Bundled Software Only and customized it so I only installed +GarageBand Demo Songs+ and +Sounds & Jingles+ but the loops are still not installed.

Loops not showing up on a specific project?

Hi there,
A quick question: I've only been working with Garageband 3 for a few months and have never encountered the following problem before.
I'm working on podcast project that involves some of the preinstalled Garageband loops. Today, when I opened the project and went to open the loop browser, none of the loops were visible at all. I opened a new GB project to see if they were missing, but they're visible.
I can see the loops in the Finder, and I can access them from a new GB project, but on my existing file, they just don't show up. I've tried dragging the folders back into the loop browser, but they're still not recognized.
Is there any reason that loops would be "hidden" only while a certain file is open? Perhaps the solution is to just start over with a new file that allows me to access the loops, but I'd rather not start all over if I can help it.
Any help is appreciated.
Thanks,
-JK

Hangtime,
Thank you so much -- this was news to me.
I should confess that this was for a student's project (I'm teaching a high school podcasting class for the first time this semester). She was completely stumped, and I couldn't figure out what she had done...
In an effort to transform the "speed" of the voices, she had changed the song to 5/4 time, which removed all the loops from consideration. Since the podcasting projects don't ask up front what the tempo, time, and key of your songs are, I didn't even know they had these attributes assigned to them.
Thank you, thank you -- this was just the prodding I needed to get this worked out.
-JK

Some loops not showing.

i installed gb3 on top of gb1, i found almost every loop appears twice in the loop browser. i then trashed the old "apple loops for garageband" folder and the old "apple loops index" folder.
after that, problem solved, but some loops are now missing in the loop browser. i've checked, the "missing" loops are still in the loop folder.
why would that happen?
how to solve?
k.

Make sure Keyword BRowsing is turned off in GB's prefs. Also any loops not in the same time signature as your song won't be displayed.

Windows Shares Not Showing Up In Finder (Master Browser Problem)

Hi, on leopard I had no problems with Windows shares showing up in finder. However, having upgraded to Snow Leopard, I've now lost that ability.
Before I had my Leopard computer set as the master browser. I did this by specifying domain master = yes and preferred master = yes in my smb.conf. However despite importing these settings into Snow Leopard's smb.conf, it is not acting as a master browser.
When I run the command "nmblookup -M -- -" which in Leopard returned my Mac as the master browser, now it says "failed to find name _MSBROWSE_#01".
I'm sure this is why the Windows PC is not showing up in finder, but I don't know why the smb-conf isn't taking effect in Snow Leopard, and setting it as the master browser?
Also, I can use Go -> Connect to access my Windows shares, and Mac shares show up in Vista okay.
Any help appreciated.

Problem fixed upon updating to 10.6.2.

OWC RAID 5 not showing up in PPro Media Browser

Hello all,
I've seen other threads about OWC RAIDs not showing up in PPro and the solution has been to use the Mac's Disk Utility to reformat the drive. Disk Utility can't do RAID 5 though and that's what my 16TB OWC Mercury Elite Pro Qx2 is set to. If I use the File->Import command I can see the OWC RAID but it is not present in the Media Browser (nor in the window that pops up to re-link offline media). FCP 7, AVIC MC 6.5 and After Effects CC2014 all 'see' and interact with the OWC RAID just fine. The problem seems to be isolated to Premiere's Media Browser function.
If anyone has a suggested work around I'd love to hear it.

So it turns out the answer was in front of me all along, just use Disk Utility to format the drive and all is well.
What threw me was that Disk Utility only does RAID 1 and RAID 0 but since the OWC Mercury Elite Pro Qx2 is a hardware RAID I just set the RAID mode using the switch on the enclosure and then use Disk Utility to format it like I would any other disk.
The simplicity of the solution coupled with my lack of experience with RAID boxes proved to be my undoing. haha.
With that being said, I'd still like to see if Adobe can fix the issue w/the default OWC formatting tool.

Artists not showing in artist list of browser in iTunes 7.0

As many seem to be, I am having a couple of odd issues in iTunes 7.0 for my Mac. First is that I have noticed that some of the artists that I have in my library do not show up in the artist list in the file browser. In most cases when I look for them in the standard list view they are there but not in the "artist" browser window. The second issue I just noticed with one song. With almost 3k songs, I am not sure if there are others at the moment. But, there was a song that I knew I had imported from a CD a couple of weeks ago but I could not find it anywhere. So, thinking I was crazy or maybe deleted it, I re-imported it and once I did that, then the first one re-appeared where it should have been all along.
Please let me know if any of you have any thoughts on either issue!
Thanks,
Dave

Is it a song on a compilation CD you burned? That might be the case.
If it's an artist album, you probably need to make sure that Artist and Album Artist have the same information.
Song: Mercy
Album Artist: Duffy
Artist: Duffy
Would be an example.
Let me know!

Images not showing up on facebook and browser pages?

not showing any images and other website when browsing the web

Do you have this issue on both mobile network and Wifi?

Garageband loops not showing in FCPX's Sound Browser

Similar Messages

Maybe you are looking for