Garageband opens now -- but USB problem

Applemeisters-- I just posted a note about how my Garageband won't open. Googled and found the problem. You must have the correct date operating on your computer or it won't work. I live in the Chicago burbs and, as a result of having power out for several days, the date on my computer system was off by that number of days. Corected that and Garageband is live again.
Now, about the USB problem. Please help. An Ion turntable that works fine with the regular stereo console, But when I plug it directly into my G4 tower with an OS 10.2.8 system and record lps into the audacity software the sound sounds miserable on the speakers while recording and miserable after I transfer the recording into a MP3. Is Ion supposed to be a plug and play for Apple or does it just work for PCs? What's a guy to do? Help. Thanks.
Paul

This is only a guess, because I've not got HK USB speakers: But maybe the master volume in GB is up too high. Take it right down and then turn up your speakers, see if that does it.

Similar Messages

  • HT3743 Iphone 4 unlocked by at&t i did a restore from itunes and get an error message "your request cannot be processed please try again after sometime" I tried for a week now but same problem, please advice

    I have Iphone4 brought from at&t USA(carrier locked) and i am in india now, i contacted at&t and requested for an unlock for me to use with indian carriers.
    I got an email confirming the unlock has been completed from at&t and asked me to connect the device to itunes and do a back&restore, after the restore process i get an error message on itunes "your request cannot be processed, please try again after sometime" i tried it with my airtel sim card and also at&t sim card but did not work. I contacted at&t and they confirmed that the unlock request was successful but i still get the same error.
    Please kindly help me if i need to do someting to be able to activate and unlock my iphone4

    Excuse me. I am on a contract with O2 with an iphone 4s, suddenly xmas day it said "no service", took it to o2 who sent it to apple factory who refused to repair it because a screw missing.  I wouldnt know have never opened phone in my life,wouldnt know how to, then went direct to Apple Regent St London who also said "screw missing, warrenty void, then produced a phone just out of contract due to upgrade,a vodaphone carrier 3gs, it was unlocked but then told by apple the owner had to go to vodaphone and get it unlocked on their books which could take up to 48 hours, it is now 72 hours later and i have the same error despite backing up old phone with i tunes and i cloud,am very angry and am paying alot for a contract every month, all i can see is "no service and waiting for activation" and all ths started when I upgraded to IOS 6.Am extremely upset and still under warranty but no one seems to want to help me to connect to WiFI, i cannot keep going to Apple Regent Street at lunchtime and be shooed of with excuses, this replacement phone 3gs should work and it doesnt.  Am extremely annoyed with the info i have been provded wth by Apple staff.Now I havent had  a phone since 25th december.

  • Photoshop elements 12 i cant open now but installed it 4th Aug was ok but wont open now

    I cant open photoshop elements12 after being ok

    Wiliescot are you facing an error when installing Photoshop Elements 12 or when opening the program?  What specific errors are you receiving?  Which operating system are you using?

  • Created a song in Garageband 11.04 but now it won't open. Message that I need to get the latest Garageband. Anyone have this problem?

    Created a song in Garageband 11.04 but now it won't open. When I try to open the song, I get a message that I need to get the latest Garageband. Anyone have this problem?

    wsmith19 wrote:
    Created a song in Garageband 11.04
    you're going to have to check the version number again, there is no v11.04, the latest is v6.0.5

  • I recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and

    i recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and they are set as they should be. I tried it in all the other older projects and same issue anyone have any experience like this very frustrating.  Can one download old version still ? or can you run both versions on OS10.9.5 ?

    Ok, either my question was too long or nobody seems to have an answer. Sad, either way
    Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
    When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
    Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
    Two questions, every idea would be great!
    - Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
    - Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
    Thank you again,
    Joern

  • I recently got new mac air and transfered my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record shows its recieving sound from software inst. but no sound. I checked audio preferences OK

    i recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and they are set as they should be. I tried it in all the other older projects and same issue anyone have any experience like this very frustrating.  Can one download old version still ?
    thanks,

    Ok, either my question was too long or nobody seems to have an answer. Sad, either way
    Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
    When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
    Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
    Two questions, every idea would be great!
    - Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
    - Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
    Thank you again,
    Joern

  • I hav som problem with my appstore n ibook dey just dont load i thought i need 2 upi date but now in mavericks updates r connected with appstore it opens up but it doesnt load sam with my ibook app and ye my date and time is fine any solutions?

    i have some problem with my appstore and ibook they just dont load thought i need to update but now in mavericks updates are now connected with appstore so i cant do that it opens up but doesnt load just blank same with ibook store it says cannot connect and yea my date and time is fine any solutions?

    Hi, James.
    Yes, the iBook should run even with no battery installed.
    These are the four most common possibilities when the battery will not charge:
    (1) there is something wrong with your battery
    (2) there is something wrong with your power adapter
    (3) there is something wrong with your power input board (the part that contains the port where you plug in the adapter)
    (4) there is something wrong with your logic board
    Since you have eliminated all the possibilities except (4), it is likely that your logic board is having problems. The PMU (Power Management Unit) is part of the logic board, and it may be going out (hence, temporarily working again when you reset it). Since the iBook is not running reliably without the battery in place (as it should), replacing the battery most likely would be futile.
    When a computer gets to be five years old, it seems a bit short-sighted to pay very much for repairs, just to have something else go wrong sooner rather than later. Have you had a look at the hugely improved specs on the new MacBooks? Is it time for a new portable to avoid embarrassment during your presentations? It sounds like that could be your best option.

  • HT4623 just updated my iPhone 4s to ios6, now my phone won't turn back on. The apple logo comes on and sits then shuts off. I have held down the home button and on/off switch several times to reset, but same problem persists.

    just updated my iPhone 4s to ios6, now my phone won't turn back on. The apple logo comes on and sits then shuts off. Then comes back on and just sits.I have held down the home button and on/off switch several times to reset, but same problem persists.

    Place iPhone on Wall Charger for at least 10 minutes. Then keep on charger and Reset, hold both home and power buttons until the iPhone begins to start, this can take about 20 seconds of holding both buttons while on charger. If still problem, open iTunes 10.7 on computer, connect iPhone to computer with USB Cable, hold both home and power buttons for about 20 seconds until iTunes recognizes iPhone in Recovery Mode, then click Restore button of iTunes. If still problem, try DFU Mode Restore, here are the steps. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power buttons, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time. If the iPhone screen is black, blank this is DFU Mode. Click the Restore button of iTunes. DFU Mode can be difficult to enter sometimes, just keep trying. DFU Mode is a black, blank screen with iTunes saying Recovery Mode. If still problem and there is Warranty or AppleCare make Genius reservation and take to Apple for resolution.

  • My IPOD Classic Video 5. Gen. showed videos, but now it does no longer show them, instead i see a black picture on my IPOD and it doesn`t work. I have to restart it every time, i try it. i restore the software with itunes, but the problem still exists.

    My IPOD Classic Video 5. Gen. showed videos, but now it does no longer show them, instead i see a black picture on my IPOD and it doesn`t work. I have to restart it every time, i try it. i restore the software with itunes, but the problem still exists.
    The Videos are showed up front 4 months, but now they are no longer to be seen. When you star a video first the hard drive starts, but then it stops and hangs up. I have to restart it, starting with the apple logo....

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • Does not let me add text to my verizon website. This adding text feature works well on internet explorer. I can click on add text, the box opens up but I can not type in the box for some unknown reason. What can be done to correct this problem ...

    does not let me add text to my verizon website. This adding text feature works well on internet explorer. I can click on add text, the box opens up but I can not type in the box for some unknown reason. What can be done to correct this problem ...

    I didn't search before, but "you are not alone" (the thread [https://support.mozilla.com/en-US/questions/747424 In Verizon's Sitebuilder for webpages, I can not edit text boxes when using Firefox. I do not have this problem if I use Internet Explorer. Is there a setting I can change in Firefox to correct this problem?] has 18 votes for "I have this problem, too).
    I can only guess about the reason... Firefox works with many websites' "rich text" editors, but ones that haven't been updated for five years may assume that Firefox is the old Netscape browser and use scripting techniques that don't work in Firefox.
    If Verizon has a different "basic" or HTML editor that you can tolerate using, you could try that. It might not be subject to the same incompatibilities.
    If I someday get a Verizon account, I will surely be looking into this further, but for now, it's hard to suggest anything else.

  • Outlook sends error message repair now but does not repair and won't open

    Installed an update - windows 8.1- now Outlook won't open. I get an error message - Repair Now - but when click on this nothing happens

    Double post
    Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

  • Have been using firefox for years but now having many problems two days ago could not acess any web pages without a firefox message saying page could not be ver

    Went on the internet on Friday but a box appeared saying firefox could not verify web page and somebody could be trying to impersinate the web page this was my home page it gave me two options the first was get me out of here or that I understood the risks and to continue I clicked the latter and my home page came up this box continued to appear on each occasion I tried to acess any web pages but when I tried to acess Facebook the box only gave me the option of get me out of here it also did this when I tried to acess Mozilla Firefox to see whether there was a problem with the browser I tried to reinstall the browser but the problem persisted I finally got round the problem by reinstalling my computer to an earlier time before I did this I also have the option for Google chrome on my computer and this browser worked fine Facebook etc I prefere Firefox but although the warning box hasn't materialised since I reset my computer Firefox has become unstable where it has frozen on a web page and the only way I can get out is to start the task manager and end the programme even though the task manager is saying that the page is still working correctly but after I have ended the running of the programme it will not reload the firefox browser but again google chrome is fine I have to restart the computer to fix this problem any ideas thanks.

    Can you attach a screenshot?
    *http://en.wikipedia.org/wiki/Screenshot
    *https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
    *Use a compressed image type like PNG or JPG to save the screenshot
    *Make sure that you do not exceed the maximum size of 1 MB
    Check the date and time and time zone in the clock on your computer: (double) click the clock icon on the Windows Taskbar.
    Check out why the site is untrusted and click "Technical Details" to expand this section.
    If the certificate is not trusted because no issuer chain was provided (sec_error_unknown_issuer) then see if you can install this intermediate certificate from another source.
    You can retrieve the certificate and check details like who issued certificates and expiration dates of certificates.
    *Click the link at the bottom of the error page: "I Understand the Risks"
    Let Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
    *Click the "View..." button and inspect the certificate and check who is the <b>issuer of the certificate</b>.
    You can see more Details like intermediate certificates that are used in the Details pane.
    If <b>"I Understand the Risks"</b> is missing then this page may be opened in an (i)frame and in that case try the right-click context menu and use "This Frame: Open Frame in New Tab".
    *Note that some firewalls monitor (secure) connections and that programs like Sendori or FiddlerRoot can intercept connections and send their own certificate instead of the website's certificate.
    *Note that it is not recommended to add a permanent exception in cases like this, so only use it to inspect the certificate.

  • Can some body give me an advice, my cursor can not be controlled after I shut it down, and open again. But this problem goes away after I closed and opened the lid

    Can some body give me an advice, my cursor can not be controlled (using pad) after I shut it down, and open again. But this problem goes away after I close and open the lid.

    Boot from your OS installer disk and run Repair Disk from Disk Utility.

  • Hello I have a problem with a Wifi Survey app, this app is from Access Agility, however this app was working fine, but without advise stop of working, I tried to open again, but app be close after few seconds.

    Hello I have a problem with a Wifi Survey app, this app is from Access Agility, however this app was working fine, but without advise stop of working, I tried to open again, but app be close after few seconds. Every time that I tried to open it, in diagnostic and use create some files, in special one named LatestCrash-WifiSurvey.plist, this one generate an incident identifier E73B0164-CDFA-4E9E-839E-A0C021BD17A2, but this incident identifier change every time that I tried to open, the last incident identifier is: DE600EB3-AB57-4C33-8DE8-71F6788A7441.
    After of it, I checked that the app had a new version available for downloading, I took a backup of my ipad and then upgrade this app, but is the same problem, all I want is to save the projects I had in this app, I´m afraid that if I delete this app and re-install it, probably I loss my projects.
    Thanks for your help indicating how I can save my projects and see them for example in an iphone for assurance that data is not lost.
    Something that called my attention is part of the log that shows a big CPU processing, but the strange thing is I killed all applications.
    Incident Identifier: E73B0164-CDFA-4E9E-839E-A0C021BD17A2
    CrashReporter Key:   ed0ca1405ce83d4f80cb3cce063d7248d7b76e91
    Hardware Model:      iPad2,5
    Process:         WifiSurvey [139]
    Path:            /var/mobile/Applications/1BEEE35A-85FC-4BE4-B62A-39A930CB3CE2/WifiSurvey.app/Wi fiSurvey
    Identifier:      WifiSurvey
    Version:         ??? (???)
    Code Type:       ARM (Native)
    Parent Process:  launchd [1]
    Date/Time:       2013-08-08 19:01:13.476 -0500
    OS Version:      iOS 6.1.3 (10B329)
    Report Version:  104
    Exception Type:  00000020
    Exception Codes: 0x000000008badf00d
    Highlighted Thread:  0
    Application Specific Information:
    com.accessagility.wifisurvey failed to launch in time
    Elapsed total CPU time (seconds): 20.990 (user 20.990, system 0.000), 52% CPU
    Elapsed application CPU time (seconds): 19.954, 50% CPU

    See:
    iOS: Troubleshooting applications purchased from the App Store
    Contact the developer/go to their support site if only one app.
    Restore from backup. See:
    iOS: How to back up              
    Restore to factory settings/new iPod

  • I used migration to send photos form my Mac Book to my I Mac now i get an error message "iPhoto can not be opened because of a problem"  Check with the developer to make sure iPhoto works with this version of Max OSX.  You may need to install any availabl

    I used migration to send photos form my Mac Book to my I Mac now i get an error message "iPhoto can not be opened because of a problem"  Check with the developer to make sure iPhoto works with this version of Max OSX.  You may need to install any available updates or reinstall IPhoto.
    I tried installing Iphoto it said it was downloaded successfully. I still get the error messafe, and can not open any photos of program,  any suggestions?

    What version of iPhoto do you have on the Macbook and on the iMac? What systems are you running on the Macbook and on the iMac?
    Does the message only refer to "a problem" or does it specify what it is?
    Happy Holidays

Maybe you are looking for