GarageBand stops recording immediately when using Guitar Rig Session

When I try to record a guitar into GarageBand using my Guitar Rig Session the recording starts, then immediately stops. This happens on a new track, or on an existing track. Everything was fine before I updated GarageBand to the latest version (6.0.4) via the App Store. I also updated to OSX 10.6.8 too. I've tried recording a track in Reaper and it works fine so I doubt it's a Guitar Rig/OSX 10.6.8 issue so I'm suspecting that it's the latest GarageBand version that's to blame. This discussion was the closest thing I could find to raise a support ticket about this. I'll have to switch to Reaper for now but if it's not fixed soon, I may not come back to GarageBand!

Native Instruments say they'll have a fix to make their software work in Lion in September. From what I've heard it only affects them running in 64 bit mode so try Guitar Rig in 32 bit mode if you can. I've switched to Reaper like I said and I'm finding the transition quite easy. Give their demo a try...

Similar Messages

Garageband stops recording immediately

when I'm using Audio Kontrol 1 (external soundcard). But I haven't had this problem more than the last couple of months. I recorded with it several months before garageband started doing this. I've got the newest 17" macbook pro with i7 processor, so capacity shouldn't be a problem. At least not while recording ONE single track.
When I use the integrated mac mic or use the software instruments, it works fine. What should I do?
I've seen several posts like this, but no answer. And I need an answer, pretty please!?

Native Instruments say they'll have a fix to make their software work in Lion in September. From what I've heard it only affects them running in 64 bit mode so try Guitar Rig in 32 bit mode if you can. I've switched to Reaper like I said and I'm finding the transition quite easy. Give their demo a try...

Using Guitar Rig 4 / Amplitube 3 in Logic Pro

Hi,
I'm using Guitar Rig 4 and Amplitube 3 as inserts in my Logic 9 projects and all is working fine.
However neither GR4 or A3 respond to MIDI cc changes from my Apogee GIO foot controller. I've been able to get both products to respond correctly to patch/stompbox changes on the Apogee GIO when used "stand alone".
It looks like when used as an "insert" the Apogee Gio MIDI cc info is not getting thru - When using Ampdesigner/Pedelboard (which I don't very often) the Apogee GIO MIDI cc functions correctly.
Is there a way of getting the MIDI CC messages thru to an insert?
Thanks for you help

Insert them as "Midi controlled AU" Plugs into an instrument slot, there is an xtra folder for those Plug-Ins and many manufacturers supply these versions.

How do I stop system sounds when using AirPlay on my MacBook Pro?

Hi all,
Probably a quick question, but I'm fairly new to Macs. I've a Macbook Pro 13 Late 2011 and now I've got an Apple TV, I use AirPlay. But how do I stop system sounds when using AirPlay?
Many thanks in advance, Jon.

Open AirPort Utility located in HD > Applications > Utilities
From the AirPort Utility menu bar click AirPort Utility > Preferences
Deselect: Monitor AirPort base stations for problems

I have a HP610-1150f. not recording sound when using webcam in touchsmart screen.

I have a HP610-1150f. not recording sound when using webcam in touchsmart screen. I have looked thru this forum and I don't see anyone else having this problem. (unless I missed it). The recording works in Notes, but not when I open Webcam and try to record from there. video recording works fine. I have had this computer less than a month and I am having a couple of problems with it. Still loving it though.

Hello schae731: Welcom to HP Forum and your new Touchsmart. You need to contact HP Direct Support on line your Touchsmart comes with one year warranty so use it why you can. You can contact them through your HP Support Assistant or on line. They will help you with trouble shoot the web-cam software. Goto your computers model and make support web-site. They will also help you with your other issues as well.
I am using the older version software so I won't be much help. Please repost if HP direct support is un able to help you resolve your issues. While you are chatting with them have them check out your computer do it before your 1 year warranty expires. Have fun with your new computer.

Using Guitar Rig

Think I found some limitations on using Guitar Rig with Mainstage. I have also posted this on NI's forums for some sort of resolution.
It appears, even though you can control just about every other parameter of GR in Mainstage, you are not able to assign a Mainstage controller to a GR controller. Therefore any mappings within GR you have assigned to a controller (i.e. effect on/off, parameter moifier, etc.), you can not set that controller to be set by Mainstage. Also, I see no way to change the GR patch directly within Mainstage as appears to be available on such things as the EXS.
Also, you are not able to set GR as a software instrument with the guitar input on the sidechain within Mainstage. You still can in Logic Pro, but it is not available in Mainstage. Perhaps this is why those patches and controller assignments can not be controlled?
Anyone have any idea how to get this functionality working in Mainstage?

Think I found some limitations on using Guitar Rig with Mainstage. I have also posted this on NI's forums for some sort of resolution.
It appears, even though you can control just about every other parameter of GR in Mainstage, you are not able to assign a Mainstage controller to a GR controller. Therefore any mappings within GR you have assigned to a controller (i.e. effect on/off, parameter moifier, etc.), you can not set that controller to be set by Mainstage. Also, I see no way to change the GR patch directly within Mainstage as appears to be available on such things as the EXS.
Also, you are not able to set GR as a software instrument with the guitar input on the sidechain within Mainstage. You still can in Logic Pro, but it is not available in Mainstage. Perhaps this is why those patches and controller assignments can not be controlled?
Anyone have any idea how to get this functionality working in Mainstage?

Why does Garageband stop recording at 106 minutes?

We are recording our church services but Garageband stops recording at 106 minutes. I looked in the preferences but didn't find anything. Its got to be something simple I just can't find it. Anyone now how to fix this?

THCapo wrote:
Garageband stops recording at 106 minutes.
http://www.bulletsandbones.com/GB/GBFAQ.html#recordlength
(Let the page FULLY load. The link to your answer is at the top of your screen)

Anyone using Guitar Rig 2 in Logic?

I'm having trouble getting GR 2 to work in logic. It works fine as a stand alone but does not work in logic! If anyone can advise me on what I might do to rectify this problem I could sure use it. It's holding up a studio project and I'm not getting much help from Native Instruments support.
Mark
G5 Duel 2 gig Mac OS X (10.4.3) Digidesign 192 digital interface / mackie DXB 200 digital console

Hmmm, I dunno-the concensus in the NI GR forum is the
same? Is it just the driver that's bad or did the
patch fix it?
Hi Justin,
May be you could give me a blow by blow discription of how to make this piece of S**t work. I am still getting no input into logic, I can hear the metronome but no imput from the strat at all.
Here's what I'm using:
G5 duel 2 gig processor
Dididesign 192 digital interface
Mackie digital console DXB 200
the AU version of guitar rig 2 loaded
logic version 7.1.1
OPEN AUDIO CHANNEL - load plug-in guitar rig
I have tried..... out of the guitar into pedal board, then out of the pedal board into the Console - NOTHING
Out of the guitar straight into the console - NOTHING
It does work as a stand alone through the console but so does everything else except guitar rig, but not in Logic!
Here's the really wierd part you can hear the metronome when the audio channel is armed and record is going - Still no guitar input at all.
Am I just doing something stupid? is the AU version not working? Do I need to load the VST? and help from you is always Greatly Appreciated, this is killing me time wise.
Thanks again guys,
Mark
G5 Duel 2 gig Mac OS X (10.4.3)

Using Guitar Rig 5 in MainStage

Hello all!
I'm just getting started with MainStage, and so far quite liking the possibilities.
However, I've hit one thing which seems to be an issue for me, assuming I've understood it correctly. Each patch seems to have it's own channel strips, with it's own AU instruments etc... which to me seems a bad idea. Surely in this state, I will end up having hundreds of AUs running for the same software, which would slow things down?
On top of that, I'm running keyboard, guitar and vocal through Mainstage. All for me, as I switch what I'm doing depending on the song we're performing (and sometimes mid-song). However, this means I may sometimes want to change a guitar patch while keeping my keyboard the same, or vice versa.
So, to my question; is there a way to change AU presets without changing MainStage patch? I mainly need to do this with Guitar Rig 5 from NI, but I'd also quite like to do it with Massive and Reaktor too.
Not quite sure I've worded that very well, so an example:
I have a MainStage layout set up, which has my vocal going through clean with maybe some EQ etc. I've also got a guitar running through Guitar Rig 5, and my keyboard into Massive. During a song, I start off on keys playing Fat Bass 1 on my keys in Massive for the intro, switch to a distortion for the verse with my guitar, then Fat Bass 2 for the chorus in Massive. Maybe later I'll want a clean guitar in a bridge or something too, with some string hits thrown in from Massive again.
The way MainStage is set out currently, I'd need a patch for each combination, which would leave me with at least 3 "patches" for one song and three instances each of Massive and GR running. I'd much prefer to just send in a control message to change the presets in Massive and Guitar Rig.
Running on a 2014 15" MacBook Pro, 2.2GHz i7/16GB RAM/256GB SSD.
Thanks

I haven't been able to find a way to get it to work with Guitar Rig yet, but for Massive (and presumably Reaktor) I have found a solution. First, create an instance in MainStage, load it with Massive and load the presets you would like to use into Massive's preset bank. Turn it on so that it will respond to patch changes.
Navigate to the 'Assignments & Mappings' tab of the edit page. Find the device you want to use to send the MIDI CC messages. If it isn't in the list, click on 'New Assignment', which usually creates an Unmapped assignment in the 'All Devices' list. Click the area where it says No Assignment to bring up the Hardware Input popup menu. Choose your device, assign channel to 1-16, and change Type to absolute. From the number menu, choose the CC number you want to send the patch change. Set MIDI thru to Automatic. Name the input to something like CC to PG01.
Click on it to highlight the mapping info. In the far left side of the Control Inspector, you'll see a list of items such as Same as Input, Block, etc. You will also see the name of the instance containing Massive. Select it to bring up a list of control parameters, such as Volume, Mute, etc. From the list, choose MIDI Controller. The third item down in that menu is Program Change. Select it.
You'll see the Parameter values for Program Change. For saved value, select the Program Change number you want to send. Number scheme is 0-127. Now, here's the tricky part that nearly drove me mad before figuring it out. For NI instruments, one of the Range Max or Min numbers must be set to zero and the other to a non zero number. If you want to select PG 0, set saved value as 0, range max as 1 and range min at 0. For any other patch number, set saved value and range max to the same number and set range min to 0.
Also, make sure that the device thats sending your CC control message is configured as a toggle switch, not a momentary, or else it will send the range min program change number when you lift your foot or finger from the button. If you want to send multiple patch changes, add more mappings and assign different CC numbers to select the patch number you desire.
An additional benefit is that you can load up a single instance of Massive with as many presets as it can hold and use aliases of that instance for other songs. In this case you would create a new MainStage patch and populate it with an alias of your Massive instance. Set up a separate hardware input (I use logic remote) and rather than setting the number to a CC controller, set it to Any. By entering the same NI mapping parameters as above, it will send the correct PG info to Massive when you select the MainStage patch containing the alias. If you need to select multiple Massive patches from the new MainStage patch, simply assign the CC controllers to select new patch assignments. All that info is freely assignable and saved on a per MainStage patch basis, so your first instance could select the patch (say 0) and use three CC controllers to set patches 1-3. On the next MainStage patch containing the Massive alias, you could set the PG to select patch 4 and those same controllers can be set to select patches 5-7.

How to use guitar rig 3 in logic

Hi everyone
I am trying guitar rig 3 demo, and one of the features is the capabilities to open the app in logic or garageband and use all the features directly while composing music in Logic.
question: how do you load it? i am used to cubase VST and VST and DX plugins, so i am not really sure how a Mac works.
Thanks!

is my question too dumb to get an answer? wow...would never expect to see no replies for a question like that

Using guitar rig in logic -9 but not getting same sound....

Hey fellow logic users
Ok heres the problem ( cut to the chase ) I am hooking up my guitar directly to the audio box direct to input 1 I have guitar rig in my plug in section now when i play the song and want to play along It comes out clean, but when i press record enable it plays like the guitar rig sample i created then when i press the space bar to start playback to practice it it plays clean but then whe i record it comes out slightly not the way it sounds when not recording I hope this is understandable lol : ) what do I need to do to make what I sound like in the guitar rig while rehearshing it so it comes out the same and not clean. I put the playback knob on my audio box in the middle so i can hear the drums bass e.t.c aong with the guitar but still no dirty sound during rhearsal before recording Thanks

Check under the audio menu options that "auto input monitor" or something like that, is enabled.

GarageBand stops recording : no error given

I'm currently running GB '11, v 6.0.5, on a MacBook Pro with 4GB RAM and a 700MB HD. When recording a podcast in GB, it will randomly stop recording at some points, sometimes after 1min sometimes after 20min. It gives no error, just stops the recording... and due to the fact that I am unable to monitor it the whole time, we are unaware that it has stopped losing critical pieces in our podcasts. We are using a line-in to record. What could I do to solve this issue?
Thanks!

Hi, please post a bit more code, this is not enaugh,
what is your inser code? is your connection still open?
you shold use:
mysql_connect
mysql_select_db
mysql_query
Titti
textures

Can I use Guitar Rig 4 Sessions I/O with Adobe Audition CC? Thanks, Al :)

Hey,
I only need Guitar Rig to power my microphone because it requires phantom power. I've never actually been able to use the effects available on Guitar Rig because I always found it too confusing and never understood how to, so I'm not bothered about using the effects. I've changed the preference settings, but it just won't let me record in a multitrack session. It records on a single track (before you start a new multitrack session), however, it will not let me play it back. I've tried different preference settings, but nothing works! I tried to attach screenshots to show my preferences, but it wouldn't work :/
I would really appreciate it if you could help me!
Thank you,
Alexis

Hi
Yes... absolutely:
1st you need to download the Controller Editor from NI, then you need to configure the RK to work in "MIDI Mode". Assign the switches & pedal(s) to whatever CC's you wish.
Then, in Mainstage, create the screen controls and MIDI Learn them.
You may need the latest RK drivers too.
HTH
CCT

Why does my iPod Touch stop recording videos when it says low battery

OK I would record a long video, about 20 minutes to be approximate. In the middle of my recording, my iPod tells me my battery is low - I have 20% of battery left. But when the message shows up, it stops recording my video and shows a closed lens on the camera!!!
Then I have to force close the app then restart it. Then I have to make a second video. Is there anyway to tell the iPod Touch low battery warning to shut the f**k up and stop interrupting and stopping my recordings? It is VERY annoying. Please reply soon.

Not that I know of. The 20% warning is like the low fuel light on your car's gas tank, it doesn't know when you'll run out of gas only that it's soon. The reason it stops what your doing is to protect the battery. Completely discharging the battery is very bad for the battery and shortens the life of the battery. Hope this helps, Good luck.

Sand Box has stopped working error when using System Exec.vi with wait until completion is true

I get the following error message in Windows 7 "Sand Box has stopped working" when using System Exec.vi with wait until completion set to true, if I set it to false there is no error message.

Hello JJVerdi
mmm well System Exec.vi simulates a DOS command window, can you run the sandbox from the cmd window using the same commands without any errors?
you may take a look to this KB, it may be related to your issue:
http://digital.ni.com/public.nsf/websearch/2393462BD57B854186256C4F007B706A?OpenDocument
Regards
Mart G

GarageBand stops recording immediately when using Guitar Rig Session

Similar Messages

Maybe you are looking for