GarageBand stops recording : no error given

I'm currently running GB '11, v 6.0.5, on a MacBook Pro with 4GB RAM and a 700MB HD. When recording a podcast in GB, it will randomly stop recording at some points, sometimes after 1min sometimes after 20min. It gives no error, just stops the recording... and due to the fact that I am unable to monitor it the whole time, we are unaware that it has stopped losing critical pieces in our podcasts. We are using a line-in to record. What could I do to solve this issue?
Thanks!

Hi, please post a bit more code, this is not enaugh,
what is your inser code? is your connection still open?
you shold use:
mysql_connect
mysql_select_db
mysql_query
Titti
textures

Similar Messages

  • Why does Garageband stop recording at 106 minutes?

    We are recording our church services but Garageband stops recording at 106 minutes. I looked in the preferences but didn't find anything. Its got to be something simple I just can't find it. Anyone now how to fix this?

    THCapo wrote:
    Garageband stops recording at 106 minutes.
    http://www.bulletsandbones.com/GB/GBFAQ.html#recordlength
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Garageband stops recording after switching to another app?

    When ever I start recording a session in Garageband - using the built in mic or an external one - and double tap (multitasking) my way to  app, iOS indicates in a red top bar that it is still recording. Actually it is not. You can see the red status bar flickering once while it stops.
    I am recording in stereo, as advised by Apple.
    Please tell me this is a bug! I would like to see my guitar tabs, while recording...

    Hi Ignacio,
    thank you very much for the ultimate fast response and sorry for the missing information.
    I am using Photoshop Touch on my iPad third generation. iOS 5.1.1
    Yes it is possible to save the project. "Delete" the App from the multitaskig bar and reopen it solves the problem.
    Best regards,
    Markus

  • GarageBand stops recording immediately when using Guitar Rig Session

    When I try to record a guitar into GarageBand using my Guitar Rig Session the recording starts, then immediately stops. This happens on a new track, or on an existing track. Everything was fine before I updated GarageBand to the latest version (6.0.4) via the App Store. I also updated to OSX 10.6.8 too. I've tried recording a track in Reaper and it works fine so I doubt it's a Guitar Rig/OSX 10.6.8 issue so I'm suspecting that it's the latest GarageBand version that's to blame. This discussion was the closest thing I could find to raise a support ticket about this. I'll have to switch to Reaper for now but if it's not fixed soon, I may not come back to GarageBand!

    Native Instruments say they'll have a fix to make their software work in Lion in September. From what I've heard it only affects them running in 64 bit mode so try Guitar Rig in 32 bit mode if you can. I've switched to Reaper like I said and I'm finding the transition quite easy. Give their demo a try...

  • Garageband stops recording immediately

    when I'm using Audio Kontrol 1 (external soundcard). But I haven't had this problem more than the last couple of months. I recorded with it several months before garageband started doing this. I've got the newest 17" macbook pro with i7 processor, so capacity shouldn't be a problem. At least not while recording ONE single track.
    When I use the integrated mac mic or use the software instruments, it works fine. What should I do?
    I've seen several posts like this, but no answer. And I need an answer, pretty please!?

    Native Instruments say they'll have a fix to make their software work in Lion in September. From what I've heard it only affects them running in 64 bit mode so try Guitar Rig in 32 bit mode if you can. I've switched to Reaper like I said and I'm finding the transition quite easy. Give their demo a try...

  • When im recording on garageband  it will stop recording

    When im recording with garageband on my ipad i will use the auido recorder and without warning it will stop recording, im not sure if its a setting or somthing but its highly annoying. Any anwsers will be helpfull

    yes the problem was the shockwave for director 11.6.8.638

  • Quicktime Stopped Recording Error

    I was recording some gameplay footage. When I went to check my footage after recording for a while and HAVING MY BEST GAME EVER the recording showed as already stopped with an error message saying something like "Recording Stopped". Is there a way for me to get back the video???

    No.

  • How do I stop Quicktime from stopping recording when it believes the signal is lost?

    I'm trying to digitize old VHS home videos through Quicktime (latest version). But when the tracking goes a bit awry, Quicktime stops recording telling me "RECORDING STOPPED, TRY RECORDING AGAIN."
    This is not true. It's just an instance of a bad part of the tape. It took me 13 days just to record one 6 hour tape because I had to start a new recording every few moments. I had hundreds of files!
    How do I stop Quicktime from ending a video recording when it believes the signal is lost? Is there a way of turning this 'feature' off? If not, does Apple have a software that will do what I'm asking? Final Cut Pro X or something else?
    Thank you!

    Here is a screenshot of the error. As you can see, I got a full 4 seconds of video recorded before Quicktime X believed the signal was lost (just a bit of off tracking).

  • Foot Control to Start/Stop Recording??

    Does anyone know if Garageband can be remotely controlled to start and stop recording? Isn't there some sort of midi foot control pedal that allows this? If anyone has any experience with this, I'd love to hear!

    The iControl is a control surface that controls many things in GarageBand. However, I don't think it could be used for a remote control for punching in/out.
    I agree. We need some kind of remote start/stop "peddle" type controller. I just ordered the PowerMate from Griffin. I don't need 50' of cabling, just about 5' or so. Should be perfect for me. I dunno about setting it on the floor and stomping on it though

  • Indesign "Licensing for this product has stopped working." Error: 5

    I have  CS4  design premium and my Indesign is giving me an error "Licensing for this product has stopped working." Error: 5 whenever I try to launch it. All the other programs work... I've gone through the multitude of steps found here.  I have also reinstalled the whole Creative suite.  I'm running Mavericks 10.9.5 on a Macbook Pro late 2009.
    Tim

    In place upgrades are nothing short of a crapshoot and given the unsupported nature of CS4 you’re pretty much on your own here.
    That said, you could try to uninstall, run the cleaner and reinstall but beyond that, all I can suggest is a clean  install of the operating system and even that won’t put you in a supported position.

  • Audacity randomly stops recording after a few seconds

    I've been trying to record a few things with audacity, which has generally worked pretty well for me in the past.
    However, whenever I try to record a second track, it only records for a second or so after I hit the record button, and then randomly stops, although the cursor keeps on moving forwards and the meter keeps showing the input.
    I haven't been able to find any reason why it would be doing this, and it is EXTREMELY fustrating. It has also done this when I tried to record for the first time in a new project, but I switched a few settings on and off again and it worked for some reason. Can anyone offer any help?

    Is this still a problem for anyone?  I came here looking for help and found more questions, so I started randomly playing with the input settings.  I have an Ensoniq (es1371).  Choosing OSS/DSP gave me an error trying to read the device; choosing hw0:0 or 0:1 had it stop recording at just over 0.6 seconds; turning software playthrough on or off had no effect.  What finally worked was "ALSA:Default" and use alsamixer to control the recording source.
    At the risk of being branded a linux hater, I should mention that the same hardware under Windows "just works" without any changes needed in the input settings on my part.  I fired up Windows 7 in a vmware window - so not only did the Windows environment work correctly out of the box, that was with the additional layer of alsa -> vmware -> windows.
    Last edited by WyoPBS (2009-06-06 18:51:54)

  • When I stop recording, tracks delete themselves

    They'll be red and recording, but then when I hit stop, it disappears. I'm recording multiple tracks.

    Are you recording the instruments to the right kind of tracks? This problem is very typical for trying to record an audio input signal to a software instrument track. Then the recorded region will simply vanish, when you stop recording.
    What is your GarageBand version?

  • BUG: Video stops recording without notification

    I tried to leave the PlayBook recording all night at 480p quality.
    When I returned to the PlayBook this morning, the camera had been recording for just over 14 hours, which was great.
    However, when I stopped the video recorder - an error message appeared (sorry can't remember what it was).
    When I went to check the contents of the video, the length of the recording was only 3:11:00 - it had dumped over 10 hours of video without any warning! The video size was just 635.7MB so I had plenty of space left.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!

    Hello,
    Welcome to Adobe Forums.
    Did you try using Adobe Captivate on a different user acount or ROOT account for MAC ?
    Does it happen with FMR ?
    Thanks,
    Vikram

  • Os X Mountain Lion and Logic Pro, Garageband Audio Recording Driver Update

    HI just purchased the os x mountain lion upgrade....and ever since my recording software like logic pro and even garageband audion recording is given me a problem .....ive been getting loud static noise during audio recording.....is there an update that will fix these issues...need to know

    en español
    tengo el mismo problema , tengo un saffire 06 de focusrite y en logic pro 9,1,7 en garageband incluso en quicktime al darle al boton de grabar en una pista de audio ya sea con microfono o instrumento me hace un ruido de distorcion mas fuerte que la señal de audio pero si no le doy a grabar este no hace el ruido y suena todo bien microfono o instrumento (solo cuando quiero darle a grabar en la pista)
    lo que es midi todo bien suena bien graba bien es solo el audio incluso los vst para guitarra hacen ese ruido o distorcion
    -grabe microfono e instrumento en pod x3 en los mismos logic pro ,garage etc etc y ningun problema todo bien
    (prueba de que es la compatibilidad de focusrite en mi caso saffire 06 con OSX mountain lion.)
    -probe grabando microfono e instrumento en samplitude pro x suite y todo genial graba de maravilla sonido genial
    (otra vez prueva que es un problema en focusrite y la actualizacion de sus drivers.)
    por ultimo esto me empezo a suceder desde que actualize a osx mountain lion hasta ese momento en lion 10,7 todo sonaba bien.
    jmcpro72 wrote:
    jmcpro72 wrote:
    HI just purchased the os x mountain lion upgrade....and ever since my recording software like logic pro and even garageband audion recording is given me a problem .....ive been getting loud static noise during audio recording.....is there an update that will fix these issues...need to know
    HI just purchased the os x mountain lion upgrade....and ever since my recording software like logic pro and even garageband audion recording is given me a problem .....ive been getting loud static noise during audio recording.....is there an update that will fix these issues...need to know
    en el soporte de focusrite me dan las mismas soluciones que ponen en su web lo de gatekeeper etc etc y nada no hay solucion mas que esperar a ver que sucede espero una solucion pronta.

  • OEM stopped recording availability data

    I'm currently going through an Administration Workshop for 10g and have a 10g database loaded on a VMWare virtual Linux machine on my laptop. When I view the database using Enterprise Manager and click the Up link, I used to be able to see a chart of the Up/Down/Agent Down times and percentages.
    I was gone for a week for other training, and now OEM is not collecting data for availability. The screenshot below shows what I am seeing on that page.
    http://home.indy.net/~mccormm/images/Screenshot001.gif
    It still has the previous data in the 31 day view, but the 7day and 24 hour views are blank. Why would OEM stop recording that information when it seems to be recording normally on the Performance pages?
    I view OEM through Firefox 2.0, if that makes any difference.
    Thanks!
    Mike McCormick

    The important thing to note is that I am not using the full Grid Control version of Enterprise Manager, just the version that manages the database. I just completed training in EM Grid Control, so I understand what you are asking me to do, it's just that those menus aren't available on this setup.
    It does have a Management Services and Repository page, though it is rather difficult to find. To get there, I go the Maintenance tab of the Database Instance page, select Collection Status from the Software Deployments section, then System Errors from the Related Links section. This puts me on the Errors tab of the Management Services page.
    If I slide over to the Management Services tab, I see this:
    http://home.indy.net/~mccormm/images/Screenshot002.gif
    The Management Service is down, with no errors. But when I slide back to the Errors tab there is a number of errors. The first one, for the Repository Metrics component says:
    Error occurred with collection for: Targets_not_uploading/Management Services and Repository/oracle_emrep. ORA-04063: package body "SYSMAN.EMD_NOTIFICATION" has errors ORA-06508: PL/SQL: could not find program unit being called: "SYSMAN.EMD_NOTIFICATION" ORA-06512: at "SYSMAN.METRICS_SEVERITY_DUPLICATES", line 1114 ORA-04088: error during execution of trigger 'SYSMAN.METRICS_SEVERITY_DUPLICATES'
    So it looks like a trigger is failing, which cascades down killing the Management Service.
    The tricky thing is, I don't know if this service ever worked. In the lab (Administration Workshop), there was no reason to look at this service. There is a chapter on Triggers, I wonder if I screwed something up in that lesson.
    I guess my plan of action is to 1) Redo the triggers lab and see if I can undo what I did. If that fails, 2) go into the installer and reinstall the EM components. If anyone else has a suggestion, I'd love to hear it.
    Mike McCormick

Maybe you are looking for