Garageband - "System Overload. The audio engine was not able to process all required data in time. (-10011). Im making a song on Garageband and I have recorded guitar, drums recorded on the musical keyboard, and vocals. It now says this, and won't play.
Im making a song on Garageband and I have recorded guitar, drums recorded on the musical keyboard, and vocals. It now says this, and won't play. Ive worked so hard on this and I don't know how to fix it. I am not very skilled or knowledgable in computers and barely know how to operate Garageband as it is. I have many different tracks in this song for different drums and beats. Please someone tell me how to fix this, I'm not even finished it! And again I am not very informed on how to work computers as well as most of you are, just saying. thanks!!!
P.S.: In my about this mac thing, it says i have version 10.9.1, 2.26 GHz Intel Core 2 Duo, and Memory is 2 GB 1067 MHz DDR3
Could you do this?
Go to Finder
Go to Applications
Go to Utilities folder
Launch Activity Monitor app
go to its Memory tab on top
tell us what you see at the very bottom?
Here is a sample of mine.
I bet your page/swap amount will be huge.
If there is not enough RAM, OS X temporarily stores RAM data on the harddrive and tries to retrieve it back into RAM when needed, unfortunately that is so slow that GB throws an error as it cannot play it all in real time.
Similar Messages
-
How can I resolve this problem? The audio engine was not able to process all required data in time. (-10011)
Could you do this?
Go to Finder
Go to Applications
Go to Utilities folder
Launch Activity Monitor app
go to its Memory tab on top
tell us what you see at the very bottom?
Here is a sample of mine.
I bet your page/swap amount will be huge.
If there is not enough RAM, OS X temporarily stores RAM data on the harddrive and tries to retrieve it back into RAM when needed, unfortunately that is so slow that GB throws an error as it cannot play it all in real time. -
i get an error message saying "system overload, the audio engine was not able to process all the required data in time (10011)
The thing is, that error message has been appearing when playing/recording a track that was running perfectly a few minutes ago and nothing has changed!
That can mean, that your project is too ambitious for your Mac. Are you using many complicated automations on that track?
4GB memory is not much, when doing audio processing. GarageBand will need all memory it can get, or will be forced to continually swap pages to your disk, to free RAM, and that can cause this error.
When this error occurs, it is best to restart the computer. This will free your RAM. Close all other applications that are competing for memory, i.e. other multimedia applications, and Safari.
Also, make sure, that you have plenty of free disk space. Don't let the free disk space drop below 20G.
Where is your project located? On an external drive or your internal drive? If it is on an external drive, connect this drive directly, not daisy-chained, or move the project to your internal drive.
I got up to eat, came back and tried to continue but GarageBand shuts down and displays that message every time I try to run the song. I've also recently run songs with several more tracks than this one and they worked perfectly. Any tips?
Are your other projects, that worked perfectly, still working? -
107 MB File - was not able to process thru File Adapter
Hi All,
I tried to send one 107 MB file using file adapter.
But was getting error as "not able to write on the integration server".It seemed like XI was not able to process file with that much size...as when we did split up the file into smaller ones ..those were processed....
I want to know what is the file size limit of File adapter......is there any way to send files with that much size from file adapter?
Can we do any file sizing exercise on XI servers?
Thanks.Hi Henrique
Even the Zip Module doesnt help.
We had a similar case, when Xi was acting as a FTP. We thought we would use the Zip Module, etc but what we realise was even if you plan to use the Zip Module, the Entire File first needs to be loaded into the memory before the module can be called and the chances are that the j2EE stack goes down even before the module can be called.
We also explored the option of using the Jar command in the command line processing before message processing, even this has the same issue that , the Data is loaded into the memory of the j2ee stack and only then the command is executed and so even though the content was zipped, the actual content used by the file adapter was not the zipped content.
Regards
Bhavesh -
I have a fifth gen ipod classic. I switched computers and was not able to transfer the songs and pictures over. When I connect my ipod to the computer it wants to sync with it which would delete all my songs and music. Is there a way around this?
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock -
I recently updated my iPhone 3G to 5.0 (9A334) and it was somehow interrupted during restoration, or at least that is what it tells me. But it keeps making a new restore and adding it to a list, but never gets through without getting interrupted. anyways, I kind of got through all that, but now all the music on the iPhone won't play and is greyed out. I had some APPs greyed out, but they are not as important. Music is a huge investment in my life and this part of it has gone silent. I SYNC with my iMac. Resyncing doesn't help. I can change the selections, but can never get them to play on the iPhone.
Any ideas?I'm having the same issue, i restored my phone to Factory settings, even tried restoring it to my backup, half of my music bought from itunes won't play on my iphone and i'm super annoyed, this only happened once i updated to ios 7.2 so i assume its another glitch to go with my imessages not sending, getting sick of this.
-
The hard drive on our laptop crashed and we took it to the apple store and they said we can transfer all files photos and videos over to another mac laptop via a special cable. We did that and everything for the two users transferred over to the other laptop fine including 80,000 photos. We got the laptop fixed and my husband transferred everything back to our laptop. In his profile (he’s the administrator) his iPhoto library has all 7900 of his photos in it as well as all his events and albums that he created prior to it crashing. It’s organized exactly how he had it; however, in my profile, my iPhoto library is empty. I had over 9,000 photos in it and like 65 events and a couple of albums and it’s completely empty yet when he transferred everything back to our mac, he it showed that 80,000 photos were transferred as well. Do you know where all those photos could possibly be stored?
Yes you can move the book but not by exporting
The book is just entries in the iPhoto database so the only way to transfer it is ot transfer the entire library it is in - you can make a "mini" library containing only one book to make the transfer easier - see Old Toad's tutorial #9 - http://oldtoadstutorials.net/No._9.html
You also can save a PDF of the book and transfer that but you can not edit pr process it
LN -
The complete iTunes library was already on my iPhone 4. Why would it all not go back on? It left out around 4 or 5 songs from my play list. How do I get them back on my iPhone?
Note: All software on both devices is up to date.
Then, I tried to sync my iPhone to my MacBook Pro. I got the message, cannot sync your iPhone because there is not enough free space in the iTunes library (not exact quote, but same meaning).
I researched how to get more free space on my phone which might 'supposedly' alleviate the above issues. I removed some less used apps, and some photos and videos from my phone. Then, I tried backing up again. I still got the message there wasn't enough free space on my phone, and the missing songs from the iTunes library were not returned to my phone. I gave another try at syncing my iPhone. I still got the same message that the phone couldn't be synced because there wasn't enough free space in the iTunes library.
Any suggestions on how to remedy these problems will be appreciated!
BTW... I read a suggestion on the internet to restore my phone (I did this recently when something went wrong during a phone update and the whole process went 'hey-wire', shutting down before the update was complete. However, at that time, all of my songs and apps were still on my phone and stored in the iTunes library.) If I restore my iPhone now, will the apps and songs no longer on my phone be lost?
Sorry there are so many questions within the same 'New Discussion' thread I'm starting! But, I think all of these issues are somehow related.
Thanks!I Have fumbled all day to this resolved, I'll run the battery down and see what happens afterwards. This is not good !
-
Not able to delete all child data
Hi
I would like to delete all existing data in Child Form, but the below code is deleting just one record.
What am I missing here..
public void RemoveProcessFormChildData(long pKey, tcDataProvider tcdp){
try
tcFormInstanceOperationsIntf f = (tcFormInstanceOperationsIntf)tcUtilityFactory.getUtility(tcdp, "Thor.API.Operations.tcFormInstanceOperationsIntf");
tcResultSet childFormDef = f.getChildFormDefinition(f.getProcessFormDefinitionKey(pKey),f.getProcessFormVersion(pKey));
long childKey = childFormDef.getLongValue("Structure Utility.Child Tables.Child Key");
String plChildTableName = childFormDef.getStringValue("Structure Utility.Table Name");
logger.info("Child Key::"+childKey);
logger.info("Child table name: "+plChildTableName);
tcResultSet childFormData = f.getProcessFormChildData(childKey, pKey);
logger.info("No. of records in Child Form::"+childFormData.getRowCount());
for(int i=0;i<childFormData.getRowCount();i++)
long plChildFormPrimaryKey = childFormData.getLongValue(plChildTableName + "_KEY");
logger.info("Child Form Primary Key::"+plChildFormPrimaryKey);
f.removeProcessFormChildData(childKey, plChildFormPrimaryKey);
logger.info("After calling RemoveChildData()");
catch(Exception e)
logger.info("Exception Occured::"+e);
Thanksforgot to add the below line :)
lookupRes.goToRow(i); -
Help I cannot
Hello Imelda2
You would need to locate those songs on your computer. Check out the article below for tips on how to locate the files and relink them.
iTunes: Finding lost media and downloads
http://support.apple.com/kb/ts1408
Regards,
-Norm G. -
Ipod says 'this video won't play on this ipod'
I have a 30 gb 5th gen ipod with video. One of the videos I downloaded from itunes played on my ipod until I connected it to my imac g5 with latest itunes available and then it says the video can't be played on this ipod. I also have latest version of quicktime player. Any help?
I just received the same error message and I have the 5th gen Ipod. I also have the most recent version of Quicktime. The video plays through Itunes but the error message is when I sync.
-
Not able to extarct all product data from t code crmd_order
Hi experts,
My Datasource is 0CRM_SALES_CONTR_I.
The data in the source system (CRM) looks like (in T-code crmd_order)
Contract (header level)
Setvice Item
Material A
Material B
The Extractor (standard one) is picking up the Contact (header level) item, Service Item and the Material A.
It is not picking up the Material B or C.
is this the standard way it should work?
At present it looks like
Contract
Service Item | Material A
But it should look like
Contract
Service Item | Material A
Service Item | Material B
Can you suggest me how to do this?
Should I enhance my Datasource?
Any suggestions are welcome!
regards,
adlinHi Adlin,
For this datasource, we only consider the item category which belongs to
BUS2000135
BUS2000131
BUS2000137
BUS2000138
BUS2000301
BUS2000252
BUS2000170
BUS2000163
You can find the codings in mapping function CRM_BW_SALES_CONT_I_MAP.
LOOP AT ls_bdoc_msg-orderadm_i INTO ls_orderadm_i
FROM item_tabix.
IF NOT ls_orderadm_i-header EQ ls_orderadm_h-orderadm_h_guid.
EXIT.
ENDIF.
IF ls_orderadm_i-object_type NE
gc_object_type_item-cust_contract AND
ls_orderadm_i-object_type NE
gc_object_type_item-srv_contract AND
ls_orderadm_i-object_type NE
gc_object_type_item-fin_contract AND
ls_orderadm_i-object_type NE
gc_object_type_item-fs_loan AND
ls_orderadm_i-object_type NE
gc_object_type_item-ubb_srv_contract AND
ls_orderadm_i-object_type NE gc_object_type_item-object AND
ls_orderadm_i-object_type NE gc_object_type_item-invoice_req AND
ls_orderadm_i-object_type NE gc_object_type_item-srv_plan_item.
CONTINUE.
ENDIF.
Any other item will not be extracted by default.
And you need to do enhancement by yourself using BAdI BWA_MFLOW.
Hope my answer helps.
Best Regards,
Shawn -
Not able to export all table data to excel
Hi All,
I am using jdev 11.1.1.4.0
I want to export all my table data to a excel file.
I used ADF inbuilt <af:exportCollectionActionListener/> to do the same.
Also, I have pagination on my JSPX.
When I click on export button to export the data, it exports current records in the page not all the records.
For instance, I have 100 records in my table and I am displaying 20 records per page.
When I click on export to excel image, it exports current 20 records instead of exporting all 100 records.
Please tell me how to export all the records to the excel.
Sample code,
<af:exportCollectionActionListener exportedId="t1" type="excelHTML"/>t1 is id of my table from which I want to export the data.
also, I have tried exportedRows="all" - but it doesn't work!!!!
Appreciate your help.
Thanks and Regards,
Madhav K.Hi Arunkumar,
thanks for your reply.
Yes, it works....
But I don't want to do the same in such way.
Because almost every page I have export to excel functionality.
So if follow this way then I have extra table on every page. I don't want this in my application.
Is there any other way???
Thanks and Regards,
Madhav K. -
TS4062 songs appear gray and won't play
Songs appear gray instead of black and will not play. This is happening to newly downloaded songs from itunes as well as some older songs already on my device and in the library.
Are they Checked? Right click on greyed out song and if Check selection appears at the bottom then it is not checked.
If not that it could be that Itunes Match is still completing the process. To Turn iTunes match off Store > Turn off itunes Match.
Or a combination of the two -
I can't install itunes for windows 7 to 64bit i tried several times and at the end show up this...
"apple application support was not found apple application is required to run ituneshelper please un istall itunes then install itunes again erro 2" ..so what it does mean? ..can somebody help me for this please? thanksLet's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)
Maybe you are looking for
-
the background behind my pages has turned black, how do i get it to go back to grey? i have switched between preview, normal, bleed, slug and presentation and closed and opened in design and it is still black. I can't imagine layouts with the black b
-
Can we throw an error in java ,if yes plz give an example?
Hi, How can we throw an error in java like an exception(using try catch).If an error can be thrown then what is the diffrence between error and exception because both can be thrown using throwble. Thanks Sumit
-
Elements 11 for Mac: "Guided Edits" stuck on "Initializing"
I purchased and downloaded Elements 11 for Mac. I opened the Photoshop Elements Editor, opened a photo and clicked on the "Guided" Tab. It then said "Initializing" and has been stuck there. I deleted and re-download and installed the program - but th
-
TS1394 I'm on OS X 10.5.8 how do I upgrade?
How do I upgrade my os x 10.5.8 Can someome please tell me?
-
MacBook Pro 13" (2011) will not wake up after it goes to sleep.
My new MacBook Pro goes to sleep like normal and then when I try to turn it back on the screen just stays black. I have turned off the put hard drive to sleep button and it is still doing it.