Garageband wont load iMac

My Garageband will not open and every time i try to open it I get two error messages.
Error 1:
T-RackS 3 has not been properly installed.
Please run the installer again to fix the problem
(I am not sure what the installer is because I just upgraded to lion and as far as I know, garageband comes with all OS versions)
Error 2:
VPA  compatability error
VPA Plugin rejected at VPA Host
If anyone knows how to fix these it would be a tremendous help!
Thanks

there are 3 possibility,
1) This cd can broken.
2) This cd can protected cd. For example, macs cannot read Playstation disks.
3)If it is a DVD and you have only cd drive, superdrive cannot read.

Similar Messages

  • Hi, i have an imac which i bought second hand but but the itunes store wont load up nor will me songs ect sync with the itunes on this comp? i have had no issues with this on previous laptops.... any more of this and i may move to samsung! please help!

    hi, i have an imac which i bought second hand but but the itunes store wont load up nor will me songs ect sync with the itunes on this comp? i have had no issues with this on previous laptops.... any more of this and i may move to samsung! please help!

    kaylsk1 wrote:
    udated and its on 10.6.8 yet still no change
    Your signature in 1st post was 10.8.2.
    You went backwards?
    Did you reformat and reinstall when you first purchased it?
    If not I HIGHLY recommend you do that before you do anything else.

  • After the install upgrade my imac wont load anymore i tried to do a safe mode load and wehn i do at the end of it it tells me that i have a "systemShutdown false" what does this mean

    after the install upgrade my imac wont load anymore i tried to do a safe mode load and wehn i do at the end of it it tells me that i have a "systemShutdown false" what does this mean

    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    If that doesn't help Reinstall the OS.

  • HT1750 Imac wont load after turning it on, all i get is a blue screen. Serial number: W8*****X85

    imac desktop wont load after turning it on, all i get is a light blue screen. I ve tried to unplug the computer and wait awhile before turning it back on but i still get the light blue screen. Please help
    <Edited By Host>

    Start up using your original install discs by inserting the disc and holding the C key while rebooting. Run Disk Utility to repair the drive and restart. If everything goes ok run Software Update again.

  • IMac wont load install DVD 10.5 on iMac g4

    I have older iMac g4, which i've kept for design-reasons - its nice to look at.
    I bought it as demo-model from a dealer when the model just had gone out of production.
    It runs OSX 10.3.9.
    I wanted to upgrade to 10.5, so I bought an original second-hand DVD;
    "MAC OS Leopard - Install DVD - Version 10.5 - 2Z691-6037-A" (black-blue color; NOT grey)
    It wont load at all. It just runs in the drive for 10 - 15 seconds and then autoejects. Same thing if I restart pressing "c". At no time does the disc appear on the desktop or a start window opens. Just nothing.
    The CD drive works ok - can read and burn.
    I tried to start the Install DVD in the new iMac and the iBook; both macs can read the dvd and opens the install window.
    What should I do ?

    It sounds like a problem with the Mac not being able to read the disc rather than the disc being an upgrade-only edition etc as it won't even read it - do other DVDs (not just CDs, as sometimes a drive will partly die and be able to read CDs but not DVDs, or vice versa) definitely work in the drive?
    I think a few of the early iMac G4s came with only a CD-RW drive ie not compatible with DVDs at all, so again testing another DVD will show if you have one of those. If this is the case you could try using Target mode to install using the DVD drive in another Mac, if you don't want to replace/upgrade the drive in the G4.

  • Media wont load or freezes when viewing in Premiere Pro CS6 Media Browser

    Adobe support contacted me on the phone and said that its a known issue if you have multiple formats or codecs when you try to view media in browser in Premiere Pro CS6 & Prelude it wont load or it will freeze. The Adobe support Tech said he would call back, but had  to further research the issue. Its been over 3 weeks and I  never heard back?
    Premiere Pro CS6 & Prelude when trying to view media in browser wont load or it freezes during viewing in media browser. I downloaded CC version and it works fine in both app. I reinstalled both Premiere Pro CS6 & Prelude app to rule that out, deleted pref as well.
    27-inch iMac, 3.5 GHz Intel Core i7, 32 GB 1600 MHz DDR3, OS X 10.9.5 running Premiere Pro CS6 & Prelude
    I have been a long time customer of Adobe products and I hope this issue gets resolved asp!!!
    Message was edited by: Kevin Monahan
    Reason: shortened the title

    Hi Zencuts,
    When you try to view media in browser in Premiere Pro CS6 & Prelude it wont load or it will freeze.
    I'm not seeing that behavior with various kinds of media. If it's a known issue, it's the first I've heard of that.
    Do you have the latest update of Premiere Pro CS6 and Prelude CS6? You can try Help > Updates to make sure. I see you have an iMac on OS X 10.9. What kind of media are you using? Which GPU is in the iMac? Have you updated the drivers recently?
    Your issues may well have to do with your installation of OS X, as well. Certain ways of updating to OS X 10.9 can reset permissions in your Adobe folders so that can cause problems. See this doc: Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later)
    The Adobe support Tech said he would call back, but had  to further research the issue. Its been over 3 weeks and I  never heard back?
    I'm not sure how you got through to support with a CS6 issue, as phone and chat support is no longer available for CS6 users (except installation issues in the first 90 days and activation issues thereafter). Forums are the only option for support for CS6 users, sorry. That said, the agent should not have promised you a call back and not followed up in some form or fashion. I will see if I can look up the case and let the agent know their error.
    Thanks,
    Kevin

  • My safari just wont load, everything else works so connection ok

    Hi
    My Safari on my imac wont load up at all it just bounces on the bar then nothing, itunes and email work fine so connection is good...........??

    Make sure the Safari app is in the Applications folder.
    From your Safari menu bar click Safari / Preferences then select the Security tab. Deselect: Enable plug ins Quit then relaunch Safari. If Safari loads pages, troubleshooting help here. Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
    Check Safari / Preferences - Extensions. If you have any installed, turn that off, quit, relaunch Safari.
    Check for Login Items:  Open System Preferences/Accounts then select the Login Items tab. Delete any files or apps you have listed there. And go to /Library/Startup Items. Move any files in the Startup Items folder to the Trash.
    From the Safari menu bar click Safari / Reset Safari. Select the top 7 buttons, click Reset.
    Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you always have a minimum of 15% free disk space.
    Try Safari in another user account. Same problems there, then log back into your admin account, launch Disk Utility.  /Applications/Utillities.
    Select MacintoshHD in the panel on the left then select the First Aid tab.
    Click: Verify Disk  (not Verify Disk Permissions). If the startup disk needs repairing, follow the instructions for Using Disk Utility to verify or repair disks

  • Running 09 8.0.6 imovie wont load to youtube

    running 09 8.0.6 imovie on my Mac OS X version 10.6.8 proc 2.66 GHz Quad core Intel Xeon Memory 3 GB 1066 MHz DDR3
    Mac HD  I have 28 available GB on internal hard drive      My imove 09 freezes and wont load to youtubeany longer?

    Hi - I have a very similar problem I think.
    Just bought a new iMac and have latest versions of iMovie, iTunes and iPhoto - yes I have checked.
    Trying iMovie for the first time - cannot see anything listed where they are supposed to be in the media browser window.
    Looking at the intro to iMovie etc it clearly shows the folder structures - I get nothing showing at all.
    Reading through the posts here it seems that there is a bug to be fixed.
    Had a problem yesterday with my iPhone not showing in iTunes - an update cleared this problem.
    Message was edited by: Lewin321

  • Desktop wont load

    The other day I was watching a dvd on my imac (only purchased in november) and all of a suddon it went haywire and the screen went half black and half pixilated. I of course turned it off, but now when i turn it on the desktop wont load. The apple symbol turns up and then turns to a broken symbol and the fan goes haywire. I can run the apple hardware test off the CD but that is it. I can't even start it up on the installation CD. Please help.

    Did you run the hardware test?
    Here is apples steps for trouble shooting an iMac G5 (iSight) that won't start up:
    http://docs.info.apple.com/article.html?artnum=106464
    Glor

  • Dashboard wont load and cpu running at 60% with nothing open

    Hi
    Dasboard wont load suddenly and the cpu is running at 60% with nothing open.
    Restarted several times but no luck
    Also iMac now is slow to open other apps.
    Tried other user and it all works fine so ran macscan and did permissions again but no luck.
    Hope you can help
    Thanks

    Plasmaproductions wrote:
    Thanks for your reply.
    1 dashboard client process was not reponding, after quitting it, it loaded ok but the cpu is running at 20% whereas it had never been more than 8% when viewing dashboard previously.
    dashboard client has 3 processes when open
    Had look at that site and i couldnt find this process on their list.
    kernel_task
    it has no process id, the user is root 1.2 52 140.00 MB 291.38 MB Intel
    That's the main part of OSX (it does have a process id: zero). It always runs, and directly or indirectly starts & controls everything else. (I never noticed it's not listed on that site.)
    also not listed on the site
    #122 iavd root 98.9 5 16.29 MB 604.24 MB Intel
    Google says it's part of iAntiVirus. I'd recommend uninstalling it; there are no viruses that run on OSX. None. Zip. Zero. There is some "malware," such as Trojans, for Macs, though. But (unlike viruses that can get onto your system without your knowledge), you must approve their installation (via your Admin password) and/or operation (via the "This application was downloaded from the internet ..." prompt). For the gory details, see Thomas Reed's [Mac Virus Guide|http://www.reedcorner.net/thomas/guides/macvirus].
    also if why safari is powerpc if the mac is intel? safari takes forever to open on the main user but is fast on the other user of this iMac
    #248 Safari Andrew 11.9 14 165.41 MB 1.34 GB PowerPC
    It sounds like you have an old PPC version of Safari, running under Rosetta. Did you transfer from a PPC Mac and somehow brought over an old version?
    Make sure there's only one version on your Mac; there might be an older one in a sub-folder inside your Applications folder, or in a user home folder.

  • My app store wont let me search for apps it wont load anything

    when i go to search for an app in the app store it wont load anything i even tried searching for angry birds becasue i know theres an app for that and nothing loads at all i have turned off and on my phone and still nothing!

    Tap Settings App > General > Reset > Reset Network Settings. Then in Settings make sure Cellular Data is ON. If you are in a WiFi area, relog into WiFi.

  • My itunes wont load and i need it because i locked my ipad

    Help my itunes wont load and i need it because i had locked my ipad

    Check to see whether it's running under processess in task manager (Right click task bar).  If so, end process and try again.

  • Itunes wont load due to java scriptcore.dll what do i do, itunes wont load due to java scriptcore.dll what do i do

    Suddenly itunes stopped loading. I uninstalled it and tried to reinstall it but it wont load saying the Java sript core.dll is not valid. What do i do to fix this? And will i be able to get my downloads back?

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

  • If I have more then a few tabs open such as gmail, facebook, and a zynga game no tabs will load at all. I close and reopen firefox numorous (Im talking 7 or 8 times or many more) and shut down the zynga game and still it wont load

    If I have more then a few tabs open such as gmail, facebook, and a zynga game no tabs will load at all. I close and reopen firefox numorous (Im talking 7 or 8 times or many more) and shut down the zynga game and still it wont load the tabs or if it does and I then try to add the game or any other site at all on a tab it causes firefox to stop working (though not close) and I have to restart opening and closing it many times to get it to work at all.

    1st, you will not be able to activate your PPro1.5 on ANY new computer, see next link for the special version you MUST use
    CS2 (and earlier) Activation Server http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l
    2nd, you already mentioned Virtual XP, so if a direct install doesn't work, that would be the way to go... or, to just do what SHOULD work from the start, just do Virtual XP

  • HT201407 during a update of apple my iphone 3GS crashed an now the operating system wont load up..ive tried to reset the phone to the factory settings it took 4 hours an completed but my iphone still wont come on..what can i do to fix the problem? please

    during a update of apple my iphone 3GS crashed an now the operating system wont load up..ive tried to reset the phone to the factory settings using itunes it took 4 hours and completed but my phone still wont come on..what can i do to fix the problem? please help #

    In trying to include what information all that I could I should have specified I DON'T KNOW THAT IT WAS DEFINATELY JAILBROKEN when I took it to the apple store they told me there's no way for them to tell if it was jail broken or not. I'm only going by what ppl have told me COULD HAVE BEEN DONE TO THE PHONE. With that said the only thing I know for sure is that the apple tech at the Genius Bar told me that someone took control of my root menu in February &amp; I've had no control of my phone since. I asked him how to regain control &amp; how he knew his exact words were "oh that is out of our scope of capabilities here at this level &amp; you would need an apple engineer to fix it". I said ok then how do I get an apple eng then? He laughed &amp; said you can't!!!! To which I was furious I came home &amp; called apple requesting to speak w/the fraud dept to file a report they said we don't have a fraud dept!! So after a 45 mn phone call again I left w/no answers.
    @TJBUSMC1973-
    I DON'T HAVE THOUSANDS OF DOLLARS TO SPEND HIRING AN ATTORNEY &amp; Although I appreciate your suggestion I fail to how an attorney would be able to facilitate in any way since there's no suspect. I cannot prove that it's him doing it so I certainly can't pursue legal action w/no proof &amp; no money. :'((
    Again I thank you for your advice but I don't think that will help.
    I was looking more for a TECHNICAL way to avoid this happening w/a new phone should I buy one or trying to get them out of my phone now! Such as installing some kind of software protection?? Someway to clear out the entire phone (other than factory reset which was done 10 x's w/no success, etc. if this person got in then there HAS TO BE A WAY OF GETTING HIM OUT, right????

Maybe you are looking for

  • How to knock off CVD clearing account?

    The Miro for custom vendor will debit CVD clearing accout. And exicise invoice will credit CVD clearing accout and debit RG a/c,but the vendor is suppier. Due to This Issue Our GRIR reports (GL also) of custom vendor Shows excess Debit Balance. Can a

  • WEBUTIL_C_API Documentation ?

    Hi People !! Does anybody knows where i can find WEBUTIL_C_API documentantion ? I would like to know all available functions WEBUTIL_C_API offers. Thanks Marcelo

  • Socket error on syslog.log

    - machine : HP-rx - CPU : Itanium - TimesTen 6.0.8 After OS reboot, below error was in the syslog.log. Jun 20 20:51:20 hbepa TimesTen Data Manager 6.0.4.tt60[3000]: 3000: Error -232 reading line from socket 11 Jun 20 20:51:21 hbepa TimesTen Data Mana

  • [PXE][IPv6] WdsClient: There was a problem initializing WDS Mode‎

    PXE/IPV6 show error after load boot image: WdsClient: There was a problem initializing WDS Mode‎ ; boot via IPV4 is pass and success to insall win8 to clent 1. Server 2012(DHCP+WDS): fail at some times 2. Server2012(DHCP)+Server2008R2(DHCP): fail alw

  • Nokia N9 can not connect with 802.1x WLAN security

    Hi, Can anybody please help me how to connect with 802.1x WLAN security network. All of other symbian devices N8, E7 can connect with it. I have the N9 latest phone from Nokia and it dont even support 802.1x in WLAN security options. I have searched