Garbled graphics when boot from USB

When I boot, I get nothing. When nomodeset is on, I get the screen in the picture below.
https://drive.google.com/file/d/0B6vGdX … sp=sharing
It's the nVidia GT610
Last edited by linuxuser21 (2014-12-09 05:52:05)

vi2nano wrote:nomodeset noapic noacpi nofb
Unfortunatly, this produced the same result; however pci=noacpi got me past the garbled screen. With this; however, I have no IDE hard drives or netork adapters.

Similar Messages

[RESOLVED] "Isolinux.bin missing or corrupt" when booting from USB.

Just giving root cause explanation and resolution to closed topic:
https://bbs.archlinux.org/viewtopic.php?id=107241
where "Isolinux.bin missing or corrupt" when booting from USB. I hope maybe someone will find it rather than closed topic 107241 :-(
Windows DD and unetbootin-windows are created for single ISO partition. That's why old Archlinux like 2010-05 will run.
The newest one archlinux-2014.01.05-dual.iso will not work like that because there is UEFI pre-boot (two partitions). That's why it can't find then Isolinux.bin and report it's missing. Of course this kind of issue will appear on old motherboard without / old UEFI support as they can't understand bootstrap and real root fs later.
unetbootin tool is partition driven so it can't do split well 32 UEFI + remaining root.
Resolution:
If you really don't have any Linux based machine to use Linux DD there is work around:
1. Install WIndows Virutalbox and extension pack
2. Download latest Archlinux ISO and run VM from it + USB support map real pendrive
3. In guest VM booted form Arch ISO just run DD if=/dev/sr0 of=/dev/sda (pay attention that SDA is real USB device then).
4. Wait about 8minutes. halt. unplug usb. Voila.
Last edited by varsovie (2014-01-15 22:20:37)

I am having this exact problem but with dd on Ubuntu 12.04 (my main distro on my main machine).
Perhaps my version of dd is too old?

Kernel panic when booting from USB

Hi guys, I'm trying to install arch on a cd-less HW (www.linutop.com) but during boot from USB
I get this kernel panic:
:: Waiting for devices to settle...
usb 2-3.1: configuration #1 chosen from 1 choice
:: Waiting 16s for USB devices
scsi 2:0:0:0: Direct-Access CBM Flash Disk 4.00 PQ: 0 ANSI: 2
sd 2:0:0:0: [sdb]: Assuming drive cache: write through
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI removable disk
:: Scanning for boot device...
:: Scanning cd drives...
:: Scanning usb drives...
/dev/sdb1
squashfs: version 3.4 (2008/08/26) Phillip Lougher
Registering unionfs 2.5 (for 2.6.27-rc6)
:: Mounting root (union) filesystem
:: Mounting images
::: Binding /bootmnt to bootmnt
:: Passing control to Arch Linux Initscripts...Please Wait
/bin/run-init: opening console: No such file or directory
Kernel panic - not syncing: Attempted to kill init!
This happens with both images archlinux-2009.02-2-ftp-i686.img and archlinux-2009.02-core-i686.img.
Have checked md5's of the downloaded files and they were correct, have also tried to double write it
to the usb stick but still the same kernel panic message.
(I can play play space invaders from the grub menu though :-) )
Many thanks for any info on this.
UPDATE:
Ups, it uses AMD Geode processor and google doesn't suggest it's i686 compatible. Can this be the reason? Please confirm and I'll mark this as solved.
Last edited by inetic (2009-03-22 23:56:39)

It is Geode LX. Thanks
Last edited by inetic (2009-03-23 12:11:32)

Blue screen when booting from USB drive in UEFI mode (2013.07)

SOLUTION for me was to update the firmware on my ASRock mb as thatu pdate changed the EFI software (by American Megatrends) version from 2.00 to 2.31. However, other users are still experiencing the blue screen.
SHORT VERSION
When I try to boot Arch Linux 2013.07 with an USB drive in UEFI mode (for installation), I get a blue screen (which is rather a literal description and not a hint towards the old Windows' one) with the message
Failed to install override security policy (14): Not found
LONG VERSION
I made an USB installation media (product: Intenso Rainbow) by following this advice on the wiki.
I used the july release of Arch for that. First of, after installing the image to the USB stick I found that I needed to correct the label in the archiso-x86_64.conf file to ARCH_201307 (or was it the label of the usb stick, can't remember right now). (Pretty sure it was the same problem with "Linux Live USB Creator" which I used 3-4 months ago...)
After doing that, I rebooted and selected the entry
UEFI Intenso Rainbow
from this list of entries:
SATA HDJ ... something (the hard drive where Win 7 64 bit is installed with all programs)
SATA something (hard drive which only contains data)
Windows Boot Manager
USB: Intenso Rainbow
UEFI: Intenso Rainbow
It went to a blue screen with a message in white text saying
Failed to install override security policy (14): Not found
Below that was an OK button which had a black rectangle over it.
After I experienced the bluescreen, I tried booting the
USB Intenso Rainbow
entry and the boot process then worked fine, I got to that Arch menu where I could choose
Boot Arch Linux (x86_64)
Boot Arch Linux (i686)
Boot existing OS
Run Memtest...
and so on...
But just to make sure, I then did the check for UEFI mode according to this and only saw a folder acpi and ... something else I can't really remember, but it definitely was not efi. Thing is, I needwant to boot into UEFI mode as I have Win 7 already installed in UEFI mode.
Some info about my motherboard: it's from ASRock and is called H67M. The BIOS is dated to 2011-10-26 and is version 1.7.
So far, I only found a mention of the problem here at superuser.com.
Last edited by jones (2013-07-15 07:15:18)

Ok then, so this thread has also become about the blank screen problem when booting (in this particular case, Arch 2013.06 since 2013.07 seems to be worse).
srs5694 wrote:Typically, you adjust kernel boot options using your boot manager or boot loader. In GRUB, you hit the "e" key to open an editor. In rEFInd, you hit F2 or Insert twice. I don't recall offhand what key does the job for gummiboot (which I'm pretty sure the Arch installer uses), but I'm certain it's got the feature.
You are right. Thanks. I realized I had the gummiboot config right in front of me all the time. It's the file 'archiso-x86_64.conf' in \loader\entries (on Windows).
An addendum: I think the USB: Intenso Rainbow boot option takes me into a GRUB menu. Hitting 'e' in this "big" and fully designed menu didn't do anything IIRC. Hitting 'Tab' did the trick to get into editing the boot command line.
Hitting 'e' worked in the gummiboot menu though.
So I tried booting with the following options (also by combining some of them)
nomodeset
acpi_backlight=vendor
radeon.modeset=0 (I have a Gigabyte 7870 card in this desktop machien)
i915.modeset=0
but it did not help.
To be rather safe than sorry: I should mention that there are two grey-ish bars visible on the top and bottom of the screen after I try to boot the first entry, Arch Linux archiso x86_64 UEFI USB. Always has been with those two older Arch version (2013.05+2013.06). I also found another thread where one user talks about using the VGA port of the monitor, which I am currently not, I am using the DVI one, so that's worth a try too. EDIT It did not help either. What I did was setting the primary graphics adapter in the UEFI north bridge configuration menu to 'onboard' which worked immediately when rebooting (I hit the button labeled "Source" on my monitor and it showed it is using the "Analog" mode), but the problem just stayed the same. Adding aforementioned boot options or a combination thereof did not change anything.
Thanks for the e-mail addresses, I sent one to James Bottomley.
Last edited by jones (2013-07-07 11:12:05)

HT1948 Does the macbook use the internal harddrive when booting from usb and when fully booted?

I wonder if the Macbook Air uses the internal SSD drive when booting Mac OSX lion 10.8.2 from a bootable USB stick?
I am suspecting the internal harddrive is faulty because it gives me random system freeze ups during normal use, making me hold the power button to shut it down. So I'm wondering if I boot my macbook from a bootable USB, if the internal drive is used for caching or anything?

What i'm doing when it freezes is totally random. I am not having any programs open, but for example just clicking on the apple icon or starting up safari, there seems to be no specific program that crashes it. I'm still running without a freeze up after I fixed the drive permissions with Disk Utility. But here is Etrecheck;
Hardware Information:
MacBook Air - model: MacBookAir2,1
1 1.86 GHz Intel Core 2 Duo CPU: 2 cores
2 GB RAM
System Software:
OS X 10.8.2 (12C60) - Uptime: 0 days 0:9
Disk Information:
APPLE SSD SM128 disk0 : (121,33 GB)
disk0s1 (disk0s1) <not mounted>: 209,7 MB
MacBook Air (disk0s2) /: 120,47 GB (106,36 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
Apple Inc. Built-in iSight
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
       [failed] com.apple.afpstat.plist
       [failed] com.apple.mrt.uiagent.plist
Launch Daemons:
   [not loaded] com.bjango.istatmenusdaemon.plist
Launch Agents:
       [loaded] com.bjango.istatmenusagent.plist
User Launch Agents:
User Login Items:
iTunesHelper
3rd Party Preference Panes:
None
Internet Plug-ins:
JavaAppletPlugin.plugin
QuickTime Plugin.plugin
User Internet Plug-ins:
Bad Fonts:
None
Top Processes:

No GRUB menu when booting from USB stick with new archlinux

Hi,
I want to try archlinux but I do not have a full backup of my current system right now, such that I do not dare to install archlinux on it. I decided to install it on a USB drive and followed the Beginners Guide considering the hints for installations on USB sticks.
The first issue that I had was that I was not able to to install gurb and it complained that no boot partition was available. I started from scratch again but this time choose the partition type EF02 (bios boot partition) instead of the default 0700 (I only have one partition on the stick). This time everything went fine until I rebooted from the USB stick. Instead of a grub menu I got:
GRUB GRUB GRUB GRUB GRUB GRUB
and nothing happened.
I booted again from the boot cd with archlinux and did the following to examine the grub installation again:
mount /dev/sdb1 /mnt
arch-chroot /mnt /bin/bash
grub-install --recheck --boot-directory=/boot /dev/sdb
>Installation finished. No error reported.
grub-mkconfig -o /boot/grub/grub.cfg
>Generating grub.cfg
>Found linux image: /boot/vmlinux-linux
>Found linux image: /boot/initramfs-linux.img
> WARNING: Failed to connect to lvmetad: No such file or directory. Falling back to internal scanning.
> No volume groups found
>Found LMDE MATE Edition (1) on /dev/sda1
>done
I don't know what the grub-mkconfig output should look like...
Do you have any idea how I can fix this?
Thanks in advance!

Welcome to Arch!
EF02 is definitely not the type code you want. That is used for a small partition with no file system which grub needs on GPT disks because it cannot fit into the space on disk. You don't install anything into it and it is 1-2MB.
Perhaps https://wiki.archlinux.org/index.php/Usb_installation would help?

How can I get network connection when booting from usb stick or dvd

Computer: HP Pavillion P6-2450eo
Secure Boot disabled
Legacy Boot enabled
Thruogh F9 I can boot in uefi mode from DVD and USB stick but I can't get at network connection from the loadet program. I have tried with Ubuntu 13.04, Linux Mint 15 and Boot Repair - all with same result.
How can I get the programs to boot with network connection?
On beforehand thanks!
poul1304
This question was solved.
View Solution.

Please verify that the programs (Ubuntu, Mint, Boot-Repair, etc.) you are attempting to use, support the Atheros AR8161L gigabit ethernet controller natively. Not all operating systems and software programs support every network device and/or configuration otut of the box. Many times, specific drivers must be loaded or injected into the OS for a device to function properly.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

I Baught A iMac 2010 From Someone it came with lion but for the programs i use i need snow leopard but when trying to install it won't boot from usb or cd what can be the problem i've been at this for over 24 hours if anyone ca help it'd be greatly apprec

I Baught A iMac 2010 From Someone it came with lion but for the programs i use i need snow leopard but when trying to install it won't boot from usb or cd what can be the problem i've been at this for over 24 hours if anyone ca help it'd be greatly appreciate it! Thanks!

Downgrade OS X Lion To Snow Leopard [Video How-To]
http://www.cultofmac.com/110614/downgrade-os-x-lion-to-snow-leopard-video-how-to /
How To Downgrade OS X Lion To Snow Leopard: The Complete Tutorial
http://www.redmondpie.com/how-to-downgrade-os-x-lion-to-snow-leopard-the-complet e-tutorial/
How To Downgrade from Apple OS X Lion to Snow Leopard
http://www.pcmag.com/article2/0,2817,2389334,00.asp

Failed boot with flashing folder, but boots from USB

Hi,
I was recently running an app from the App Store, when my computer froze. I got the classic spinning beach ball on the app, so went to the dock to ctrl-click the dock application icon to force quit it. This then crashed my dock. After some time I gave up, and force-turned my MacBook Pro (13-inch, Mid 2009) off by pressing and holding the power button.
I turned my mac on again, booted to a gray screen, then 30 seconds later a folder with a question mark in it began flashing on the screen.
My Mac did not progress further in its boot. So I did all the usual stuff;
I re-installed my RAM and HDD (both of which I have upgraded a little while ago to improve specs) and tried to boot again without success.
I tried to access the recovery partition by holding alt while booting, to no avail, doing so just left me with a grey screen and a mouse pointer displayed. I believe that this may have been the case because I boot from an encrypted hard drive (I have encrypted it using filevault) and I have heard that recovery mode is inaccessible when booting from an encrypted drive.
I zapped my PRAM. (cmd-alt-P-R)
I tried booting into safe mode. (⇧)
Nothing worked. I then, as a last resort, removed the HD from my MacBook Pro, and swapped it with the non-encrypted drive that I use to back up menial data. I tried booting from the unencrypted drive into recovery mode, and it didn't work.
However this is the interesting bit. I then tried to boot (via USB) from the encrypted (original) HD that I had put in my external enclosure. This works. I logged in (past the encryption) and can now use my computer as normal.
I would therefore think that my Mac has something wrong with the HD bridge, or the HD cable inside my Mac. However, I can now read from and right to the unencrypted HD that I installed in my mac!? Very Wierd!?
If anyone has any ideas about what may be going on, I would be very gratefull, as I can now only boot my Mac via USB, which is a hastle to say the least. I include a screenshot.
Thanks so much!!
Mr BlobE

In this case sig the interesting thing is that the computer boots when the Startup Disk is connected via USB. In other words, my laptop will read and write, but not boot from the internal drive. Thanks Linc Davis, I have done just that and should hopefully have a working mac by tomorrow!

Can't boot from USB or DVD. HP Pavilion g6-2257sr

My new notebook HP Pavilion g6-2257sr don't let me to boot from USB device.
When notebook's booting, I pressed ESC and F10. Then I set up UFEI boot order - USB-device / DVD / OS selector.
I use official Windows 7 disk, and several own USB devices with bootable images.
But rebboting use hard drive's OS all the same.
Please help. I want to delete current OS from my notebbok.
This question was solved.
View Solution.

Hi:
I would make a set of recovery disks first before proceeding.
To boot the PC you need to go into the BIOS and enable legacy mode.
Then you should be able to boot from another device.

Hp mini will not boot from usb and USB not listed as a choice

I have an HP mini 110-1116NR and it crashed. During a system restore it stopped working so now there is no operating system on it.
In BIOS there is no choice to boot from USB (when my disks come in mail from HP)
Also when it kinda starts im at the DOS screen....system32.exe???????
I dont know what this means

Hi cathy69:
Thank you for your inquiry. I am pleased to assist you!
I hope you had a great weekend!
I see you are looking to change the boot order on your computer. Here is a link to 'Configuring the Boot Order in the System Bios" click here. Please let me know if you require further assistance.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

How to boot from USB flash drive - Portege R500

Hi,
I have a Portege R500 running Windows XP, brought about 2 years ago, and recently contracted a worm virus that has infected some of the start up files as the minute I log in it logs out again, even in safe mode! Quickest way I can think of sorting it is to reformat it with the XP recovery disc and reinstall windows.
Problem!! The CD/DVD drive on the laptop stopped working a while ago, have tried pretty much everything in the thread on this site but had no luck.
So my plan was to boot from a USB flash drive and do it that way. However in the boot settings I only have the options of HDD / FDD / CD-ROM / LAN, neither of these will work. Does anyone know how to boot from USB flash drives?
Any help would be really appreciated

Hi
As far as I know it should be possible to boot from USB FDD
Im not sure if you would be able to boot from USB flash drive but its definitely worth a try
Generally you could try to press F12 button when notebook powers up.
Then a boot menu should appear on the display and you should see all bootable devices.
PS: As far as I know the USB booting was available in ToshibaHWSetup (Toshiba tool which changes the BIOS settings in windows OS.) Therefore I assume booting from USB should be possible.
Greets

Bootcamp woes, unable to boot from USB and DVD drive reads all DVDs blank

My partner and I are completely unable to install Windows using Bootcamp. We have tried dozens of solutions on the internet.
2011 iMac (purchased in by me and my partner 2012) reads all DVDs as blank. We have (hilariously) another Mac, an MBP, that has the same exact problem. You'd almost think "Superdrives" eventually just stop working or something. So obviously we can't install Bootcamp on the iMac using a DVD.
But what about a USB stick? Well after modifying the plist file and writing a bootable Windows USB and trying to boot from that, we were greeted with the mysterious and apparently yet-unsolved "no bootable device" error.
So our iMac can't boot from USB drives or read DVDs. We've only owned it for two years. And this is the second Mac we've owned where the Superdrive has died. And we don't even use DVDs more than like once a year.
But anyway, can someone tell me what we're supposed to do if we want to install Windows aside from throwing money away to buy another Superdrive that is probably going to die again in a year? Maybe a way to make our mac boot from our USB stick? Something?
Thanks.

Should you have another drive with a MBR, use it to rule that issue out. Alternatively create a GPT on the flash drive and try to boot from it.
What options are there for the usb controller/boot priorities/order/options? Does the laptop recognize the usb flash when already in bios setup? Should there be any form of choosing the device to boot, use that with the flash drive in the socket, then switch it with the external drive.

K7T Turbo2 - how do I tell BIOS to boot from USB?

I have an old K7T Turbo2 system, and I'm trying to install Windows 7 on it. I guess that's my first question - am I going to run into any nasty problems running W7 on this board, other than RAM limitations? I have a version of "Tiny7" (which installs from CD-ROM) installed already and it seems fine, but I'd rather run a fuller non-pirated OS, and that means installing from a DVD/iso. I don't have a DVD drive installed and it would be a bit of a pain to acquire one, so I'm hoping to boot from USB to winstall W7.
I have a PCI USB2.0 card installed in the system, which seems to work fine. I've set the BIOS to boot from USB-FDD (but I've also tried USB-CDROM and USB-ZIP). I have BIOS 3.6. I've tried booting from the PCI USB2.0 hub (will that ever work or does the BIOS not recognize it?) and from the regular USB1 port on the mobo (but my USB flash drive is USB2).
Is there something else I need to do in the BIOS to get this to work? Will it never work no matter what I do?
I read somewhere about a BIOS setting to "enable legacy USB support" but can't see anything like that in my BIOS settings.
Any suggestions? (thanks in advance)

If there is no option to boot from USB-HDD then it may never work.
Long shot I know, but what if you connect your USB drive, then power on your system, and press F11 when the logo/POST screen appears, does the drive show in the Boot Menu that appears?
Quote
I don't have a DVD drive installed and it would be a bit of a pain to acquire one
Really? DVD drives are very common, and cheap as chips! You can pick up a brand new DVD writer, for the price of a (good) DVD movie.
http://www.newegg.com/Store/SubCategory.aspx?SubCategory=5&name=CD-DVD-Burners&Order=PRICE
(Obviously, you'll need an IDE/EIDE type )

HP Pavilion 11 x2 not booting from USB

I have tried everything I can think of but my HP Pavilion 11 x2 will not boot from USB...I have Windows 10 currently installed on it and need to boot from USB to allow me to install a new OS on the machine.
I have gone into hte bios...(which I can see is a locked bios with very limited options)....I have turned off the Secure Boot option and have set the USB has the first boot device.
But when I hit F9 on startup...it just gives me 2 options:-
OS Boot Manager
Boot From EFI File
I have tried Boot from EFI File...but this does not work..
I know the USB is configured correctly as I can boot from it on my desktop computer.
How can I get this to work?
Thanks in advance

hi,
i stumbbled into your thread while i was looking for a similar answer for my Pavilion X2 10".
mine was delivered with win 8.1 with bing. it was alright to use, but i was unable to bring this machine to connect to my office domain. due to the lack of networking features which is only available in the pro or enterprise version of win 8.1.
i tried many ways to load in a win 8.1 pro os. the disc is authentic, keys are authentic, usb stick or optical drives; it makes no differences. the machine just refuse to boot into the usb disc / stick like all other previous system does.
there isnt an option for the bios to go into legacy mode. however there is an option to turn off the secure boot, but that does not gives legacy support to the make the system boot to usb.
i had probably done the same things you tried, no matter what setting is done to the bios, there is always only 'os boot manager' and 'ueif' when i hit boot sequence (f9).
had tired everything that i can think of, talking to HP was like talking to an answering machine, and they were asking the most bacis questions ... "were you able to select 'legacy boot' from the bios menu?" ... even when i tell them there isnt a legacy boot option in the bios ... they were too amature .
i concluded that the only way to boot to usb is to do it in uefi with secure boot off and encryption turn off in win 8.1 (else it will bring u to bitlocker).
but i am still unable to boot into the usb media to install win 8.1 pro today. i gave up.

Garbled graphics when boot from USB

Similar Messages

Maybe you are looking for