Garbled mouse on second screen with ati

Hello,
just finished a fresh install of arch on my desktop, it has a ati radeon 5700 and i would like to use 2 screens. After a while of tinkering and looking through the wiki and the aticonfig man page i managed to get both of my screens working with the command "aticonfig --initial=dual-head resolution=0,1280x1024 resolution=1,1024x786" or something very similar to that( sorry on laptop and cant remeber exact command). I could not get it to work until i manually set the resolutions. After that i installed dwm and everything started up fine and its usable however on the second screen my mouse becomes a big garbled square of pixels, it looks fine on whichever screen is set as 0 though.
thanks in advance for any help.

Well, I'm configuring everything today and making it all pretty, so I'll see if changing the pointer theme fixes it.
Thanks a bunch for the help.

Similar Messages

I am using MAC OSX 10.9.4 and LR5 Ver 5.6. I can't drag LR to my second screen. It's always worked before. All of my other apps drag to the second screen with no issues. I've re-booted my computer and it did't help. Any ideas???

I am using MAC OSX 10.9.4 and LR5 Ver 5.6. I can't drag LR to my second screen. It's always worked before. All of my other apps drag to the second screen with no issues. I've re-booted my computer and it did't help. Any ideas???

Make sure you are not in one of the full screen modes.
Window > Screen Mode > Normal
Can you see the "Traffic Lights" at the top left of the Lightroom window?

How do I use my iPad as a second screen with my macbook pro?

I've got splashtop streamer for my ipad. In school my computer teacher has two monitors and she is able to drag stuff from one screen to the other. If i was streaming to my ipad, how could i use it as a second screen? and how could I do this with any old monitor?
BTW if you dont know splashtop streamer, it is a software that lets you stream content from a computer or laptop to a wireless device, such as an iPad.

Splashtop only has the ability to mirror your Mac's single screen. It does not let your iPad work as a second screen.
You need an app that is designed to turn your iPad into a real second monitor.
I use Air Display to move all of my pallets to one screen when I am working with my graphics programs on my Mac. I keep my iPad connected to my iMac to keep it charged while I am using my iPad in this manner.

Connecting a second screen with PSE 11

Hi, How can I use a second screen - high quality - on my portable PC to show the progress of my work while keeping the tools on the base screen?

That is not a function of Photoshop or Elements, but rather of your computer hardware and operating system. If your 'portable' PC was bought in recent years, then it will probably have an HDMI socket that looks like this
If older, then it might have a VGA socket (the blue one)
Or if in between, possibly a DVI port
You need to match one of these sockets to whatever you have on the external display.
To link up is a function of the OS. If Windows 7 or 8, then 'Windows key p' will open a panel from which you should select Extend. After that you simply drag and resize panels to your taste, and when happy, save it as a new Workspace. I don't know how to do that with Elements. (This is the Photoshop forum)

IMac 21,5 2010 3,06GHz Second screen no max resolution

Hi there,
I have an iMac 21,5 3,06Ghz 2010-model. And an LG Flatron w2261VP. I want to connect this LG to my iMac, but when i do it gives a max res. of 1600x1200. This is not the native res. for this screen, the native one is 1920x1080. But when i select the 1600x1200 the screen goes black and says "out of range". However, when i connect the LG screen to my MacBook Pro 13" 2010 the screen automatically uses the 1920x1080 resolution and works flawlessly.. The resolutions i can select on my imac for my LG are: 640x480, 800x600, 1012x768, 1152x870, 1280x768, 1280x960, 1280x1024, 1344x1008, 1400x1050 and 1600x1200
I'm currently using the 1400x1050, can't select the higher one; screen goes "out of range"
I use a mini-displayport to VGA adapter.
My question is: Is it even possible to use a second screen with my iMac? Why does it work with my MacBook Pro and not with my iMac? Is it a bug? Do i need a DVI of HDMI? Anyone else suffering this problem?
Your help is very much appreciated!

Are both in Extended Desktop Mode?
Other than that, check out the following threads.
http://discussions.apple.com/thread.jspa?messageID=10960796&#10960796
http://discussions.apple.com/thread.jspa?messageID=11784734&#11784734
http://discussions.apple.com/thread.jspa?messageID=11723943&#11723943

How do I get my DVDs to play full screen on a second screen?

I downloaded OS X Lion a few days ago and went to watch a movie on the second screen that is hooked up to my macbook pro. Instead of going to full screen on my TV, the movie moved itself back onto my computer and filled my second screen with a gray picture. Why does it do this, and is ther any way to play a DVD on a second screen in full screen? I have tried mirroring but the movie will not fill my TV screen like it used to with the old system because it is limited to the shape of my computer screen.

This is a general problem with the full screen mode under lion. Every time you bring whatever application in full screen mode the secondary screen is not usable anymore. As workaround you can only switch the primary screen onto you TV screen as long as you watch movies.
I know that this is no final solution but the only alternate is to roll back to SL. (I did so, and now I wait until Apple fix the problem)
Unfortunately Apple devellopers don't watch the community discussions. If you want to inform them about this problem please use the following link:
http://www.apple.com/feedback/
I did it also and discribed the problem there. My hope is that if many people do the same this problem gets higher priority and will be resolved by apple devellopers.

Moving to second screen of SAP GUI from webdynpro application

Hi friends,
I want to open the secatt applications second screen from webdynpro UI. For this I am using the following code on webdynpro side
CALL METHOD cl_wd_utilities=>construct_wd_url
EXPORTING
application_name = 'appname'
IMPORTING
out_absolute_url = lv_final_url.
SPLIT lv_final_url AT 'webdynpro' INTO lv_first_url lv_second_url.
SPLIT lv_second_url AT 'ztwb_tor' INTO lv_final_url lv_apostrophe.
CLEAR lv_final_url.
CONCATENATE lv_first_url '/gui/sap/its/webgui?TRANSACTION=secatt&RB_TEST_CONFIG=X&RB_ECATT_SCRIPT=& ECTC_VER-NAME =' ls_ztwb_test_case-testcase '&okcode=ECOB_SHOW' lv_apostrophe
INTO lv_final_url.
CALL METHOD lo_window_manager->create_external_window
EXPORTING
url = lv_final_url
RECEIVING
window = lo_window.
lo_window->open( ).
But I am still able to open the first screen of secatt and not the second screen with the relevant testcase datails.
But if I try to open the second screen of SCAT transaction I am able to open it using the following url.
CONCATENATE lv_first_url '/gui/sap/its/webgui?TRANSACTION=SCAT&*CATA-ABLNR=' ls_ztwb_test_case-testcase '&okcode=ZEIG' lv_apostrophe
INTO lv_final_url.
Is there anything else that I need to pass as parameters in SECATT transaction.
The program of SCAT transaction is a module pool program.
The program of secatt transaction is a function pool program.
Thank you.

Hello Mohsin,
I checked the program of SECATT. its just uses the workbench manager to start the respective GUI screen and its not passing any parameters. So I doubt whether you can pass parameters or OKcode to the SECATT tcode.
What you can do is to identify the respective landing screen of SECATT tcode and invoke them by passing parameters.
BR, Saravanan

White screen of death and computer halts with ATI 4870 in Boot Camp

Hi!
I have just received the ATI Radeon 4870 for my Mac Pro (Early 2008)and have upgraded my Leopard to 10.5.7 and works fine on the Mac side. When I reboot and hold the command key I can see my MAC and my BOOT CAMP 2 options as always before. When I click on boot camp I get a white screen with a black frome around it and there is NO hard disk activity and nothing happens no matter how long I leave the computer alone. Before I had no problem booting into my boot camp loaded with vista 64 bit. I have another partition with parallels and that is fine but not this boot camp partition.
I am using ONLY this card in the system. I removed the NVIDIA card.
ALso I tried putting in my Vista 64bit DvD into the drive and rem=booting and see the option when hold the option key to go into MAC,WINDOWS,DVD.... When I select DvD and computer adjust to work in a windows enviroment again the system halts. SO I believe it has nothing whatsoever to to do with drivers inside Vista. It would have to be something that needs upgrading for bootcamp to allow for this video card to work on Bootcamp?
Again I have the latest updates of the OS.
Any suggestions?
Thanks for all your time!

CorkyO recommended what I would do: install old card, uninstall any graphics drivers and delete them, and use Driver Sweeper as well. So that there is nothing there.
If you have a raw unformatted drive, pull everything else and leave that in.... as if it was a PC and starting for the first time.
Don't use Boot Camp Assistant.
Don't put Windows on the same drive as OS X.
Do try Windows 7.7100 RC 64-bit.
Apple has not posted a link to graphics drivers since early 2008.
http://support.apple.com/kb/TS1442 - "Not found" and WAY out of date (167.xx) which would be foolish and obviously would not support Vista or 4870.
I would pull the Vista drive for another reason, too, so you can start fresh and import or access the files on it later.
Vista is sensitive to the presence and drive position of where the drive and OS was, the master boot record and such which I confess to not fully understanding.
Which is another reason to install Windows with no other hard drives present.
You keep saying you used COMMAND rather than OPTION key to restart into Windows, so figure typo/slip.
I would RESET SMC and ZAP PRAM/NVRAM. Force the device tree to get rebuilt. And that is important to OS X - suppose to do so but the G5s it never worked properly on its own.
There is a reason why people that play with graphics cards and drivers use Driver Sweeper, it works, and it is essential at times.
Early boot is under the control of EFI. I don't know what if anything Apple does (I don't trust the firmware updates that were suppose to provide better Windows compatibility only to learn it was mostly for XP and not Vista, and that it added a full 30 seconds to my boot routine into Windows - where EFI + Boot Camp does make Windows think there is a traditional BIOS.... my best summary guess.
Work with the only factual symptom: pulling one card and putting in 2nd is causing a problem.
EVGA Guide to troubleshooting graphics drivers and cards:
http://www.evga.com/forums/tm.asp?m=396474
Latest ATI Catalyst Vista/Windows 7
http://downloads.guru3d.com/ATI-Catalyst-9.5-Windows-7-
GURU3D Driver Sweeper
Driver Sweeper 2.0 beta (I'd use this instead.)
Driver Sweeper forum:
http://forums.guru3d.com/forumdisplay.php?f=29
GPU-Z (latest)
http://downloads.guru3d.com/GPU-Z-0.3.4-download-2073.html
http://downloads.guru3d.com/

Erratic Magic Mouse (jumps accross screen precisely every second)

The title sums it up really. Every second (on the second) the cursor will jump very slightly on the screen. Probably only about 2 or 3 millimeters. It's annoying, but it's not a huge deal.
What IS a huge deal is when the mouse decides to jump the cursor to a random point on either of my two screens. Extremely annoying especially if the second screen isn't even turned on and it jumps over there.
What I've noticed is that it seems to do it more frequently when there is a higher load on the system. With a 'normal' workload (internet browsing, skype, listening to music etc) it will do this big jump approximately every minute. But when there is a high load, like when I'm trying to play a game it will happen every couple of seconds, rendering most games totally unplayable! (The number of times my character has ran off the edge of a cliff because of this is maddening).
Now here's the thing, I took my iMac and Magic Mouse to my local Apple Store and wouldn't you know it, nothing happened. It behaved itself perfectly. But they were very good and swapped my old Magic Mouse for a brand new one out of a retail package anyway. Happy, I bring it home and immediately it's doing it again exactly as before with the brand new mouse!
My iMac is the 2010 27" Core i5 version upgraded with 12gb of ram, in case any of that is relevant at all.

I don't believe this. I've just spotted this post by user Ratzelda. He says that it's an issue with having dual (or multiple) monitors connected but powered down. I hadn't noticed any change in the mouse's behaviour when using the second monitor, but out of curiosity I just switched it on and sure enough the mouse is behaving normally now!
That explains why the mouse didn't respond erratically when I took the iMac to the Apple Store, because I didn't take my second display with me.
It seems like this is a known issue, and yet no patch has been released by Apple to fix it? Having to continuously run both monitors when it's not needed seems very energy inefficient to me. What is Apple playing at?

Sleep mode wakeup with black screen with curser for a few seconds

when the computer goes to sleep, sometimes when i click anybutton, it gives me a black screen with a curer and then it apparing everything normally. whats the problem causing this

I have the same problem but I do not know of any solutions. I am searching for one as well.
Let me rephrase the issue I experience. After the display goes off because of the energy saving settings, and after moving the mouse (or pushing a key) to wake it up, the screen appears black (but with the presence of the mouse cursor, which can move and even change shape---to a hand or a hyphen---if the pad is clicked) and stays black for a couple of seconds, from 3 to 10 seconds I believe.
The computer is not responsive after that but not before. The previous and normal behavior is intead for the screen to turn on immediately and the computer being responsive right away. Instead, now there is a window of 3-10 seconds where the screen is black with a cursor and the computer unresponsive.
Of course, it is very frustrating. Please help.

New Install - startx results in blank screen with mouse cursor

I installed Arch on my desktop last week with no issues, so I wanted to install it on an old THinkpad R31. Everything with the installation went smooth, but when I try to 'startx' all I get is a blank screen with a mouse cursor that I can move around. I've installed xorg-xinit, xorg-twm, xorg-xclock, and xterm.
I'm not getting any significant errors in the logs, or even the terminal I issue 'startx' in.
I'm not sure what the problem could be...
Here is my output from 'startx'
X.Org X Server 1.13.0
Release Date: 2012-09-05
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.6.0-1-ARCH i686
Current Operating System: Linux x_00294-ibc 3.5.6-1-ARCH #1 SMP PREEMPT Sun Oct 7 19:33:50 CEST 2012 i686
Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=ec6a9a60-8d8c-4de0-960b-9e2a044d0ca5 ro quiet
Build Date: 05 October 2012 02:01:30PM
Current version of pixman: 0.26.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 13 09:26:12 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
xinit: connection to X server lost
waiting for X server to shut down XIO: fatal IO error 0 (Success) on X server ":0"
after 554 requests (554 known processed) with 0 events remaining.
xterm: fatal IO error 11 (Resource temporarily unavailable) or KillClient on X server ":0"
xterm: fatal IO error 11 (Resource temporarily unavailable) or KillClient on X server ":0"
xterm: fatal IO error 11 (Resource temporarily unavailable) or KillClient on X server ":0"
Server terminated successfully (0). Closing log file.
xinit: unexpected signal 2
And my Xorg.0.log
[ 4955.478]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 4955.479] X Protocol Version 11, Revision 0
[ 4955.479] Build Operating System: Linux 3.6.0-1-ARCH i686
[ 4955.479] Current Operating System: Linux x_00294-ibc 3.5.6-1-ARCH #1 SMP PREEMPT Sun Oct 7 19:33:50 CEST 2012 i686
[ 4955.479] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=ec6a9a60-8d8c-4de0-960b-9e2a044d0ca5 ro quiet
[ 4955.479] Build Date: 05 October 2012 02:01:30PM
[ 4955.479]
[ 4955.479] Current version of pixman: 0.26.2
[ 4955.479] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4955.479] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4955.480] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 13 09:26:12 2012
[ 4955.480] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4955.480] (==) No Layout section. Using the first Screen section.
[ 4955.480] (==) No screen section available. Using defaults.
[ 4955.480] (**) |-->Screen "Default Screen Section" (0)
[ 4955.480] (**) | |-->Monitor "<default monitor>"
[ 4955.481] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4955.481] (==) Automatically adding devices
[ 4955.481] (==) Automatically enabling devices
[ 4955.481] (==) Automatically adding GPU devices
[ 4955.481] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 4955.481] Entry deleted from font path.
[ 4955.481] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 4955.481] Entry deleted from font path.
[ 4955.481] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 4955.481] Entry deleted from font path.
[ 4955.481] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 4955.481] Entry deleted from font path.
[ 4955.481] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 4955.481] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 4955.481] Entry deleted from font path.
[ 4955.481] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 4955.481] (==) FontPath set to:
/usr/share/fonts/misc/
[ 4955.481] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4955.481] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4955.481] (II) Loader magic: 0x825a620
[ 4955.482] (II) Module ABI versions:
[ 4955.482] X.Org ANSI C Emulation: 0.4
[ 4955.482] X.Org Video Driver: 13.0
[ 4955.482] X.Org XInput driver : 18.0
[ 4955.482] X.Org Server Extension : 7.0
[ 4955.484] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 4955.486] (--) PCI:*(0:0:2:0) 8086:3577:1014:0505 rev 4, Mem @ 0x98000000/134217728, 0x90100000/524288
[ 4955.486] (--) PCI: (0:0:2:1) 8086:3577:1014:0505 rev 0, Mem @ 0x88000000/134217728, 0x80200000/524288
[ 4955.486] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 4955.486] Initializing built-in extension Generic Event Extension
[ 4955.486] Initializing built-in extension SHAPE
[ 4955.486] Initializing built-in extension MIT-SHM
[ 4955.486] Initializing built-in extension XInputExtension
[ 4955.486] Initializing built-in extension XTEST
[ 4955.486] Initializing built-in extension BIG-REQUESTS
[ 4955.486] Initializing built-in extension SYNC
[ 4955.487] Initializing built-in extension XKEYBOARD
[ 4955.487] Initializing built-in extension XC-MISC
[ 4955.487] Initializing built-in extension SECURITY
[ 4955.487] Initializing built-in extension XINERAMA
[ 4955.487] Initializing built-in extension XFIXES
[ 4955.487] Initializing built-in extension RENDER
[ 4955.487] Initializing built-in extension RANDR
[ 4955.487] Initializing built-in extension COMPOSITE
[ 4955.487] Initializing built-in extension DAMAGE
[ 4955.487] Initializing built-in extension MIT-SCREEN-SAVER
[ 4955.487] Initializing built-in extension DOUBLE-BUFFER
[ 4955.487] Initializing built-in extension RECORD
[ 4955.487] Initializing built-in extension DPMS
[ 4955.487] Initializing built-in extension X-Resource
[ 4955.487] Initializing built-in extension XVideo
[ 4955.487] Initializing built-in extension XVideo-MotionCompensation
[ 4955.487] Initializing built-in extension XFree86-VidModeExtension
[ 4955.487] Initializing built-in extension XFree86-DGA
[ 4955.487] Initializing built-in extension XFree86-DRI
[ 4955.487] Initializing built-in extension DRI2
[ 4955.487] (II) LoadModule: "glx"
[ 4955.488] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4955.489] (II) Module glx: vendor="X.Org Foundation"
[ 4955.489] compiled for 1.13.0, module version = 1.0.0
[ 4955.489] ABI class: X.Org Server Extension, version 7.0
[ 4955.489] (==) AIGLX enabled
[ 4955.489] Loading extension GLX
[ 4955.489] (==) Matched intel as autoconfigured driver 0
[ 4955.489] (==) Matched intel as autoconfigured driver 1
[ 4955.489] (==) Matched vesa as autoconfigured driver 2
[ 4955.489] (==) Matched modesetting as autoconfigured driver 3
[ 4955.489] (==) Matched fbdev as autoconfigured driver 4
[ 4955.489] (==) Assigned the driver to the xf86ConfigLayout
[ 4955.489] (II) LoadModule: "intel"
[ 4955.490] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 4955.491] (II) Module intel: vendor="X.Org Foundation"
[ 4955.491] compiled for 1.13.0, module version = 2.20.9
[ 4955.491] Module class: X.Org Video Driver
[ 4955.491] ABI class: X.Org Video Driver, version 13.0
[ 4955.491] (II) LoadModule: "vesa"
[ 4955.491] (WW) Warning, couldn't open module vesa
[ 4955.491] (II) UnloadModule: "vesa"
[ 4955.492] (II) Unloading vesa
[ 4955.492] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 4955.492] (II) LoadModule: "modesetting"
[ 4955.492] (WW) Warning, couldn't open module modesetting
[ 4955.492] (II) UnloadModule: "modesetting"
[ 4955.492] (II) Unloading modesetting
[ 4955.492] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 4955.493] (II) LoadModule: "fbdev"
[ 4955.493] (WW) Warning, couldn't open module fbdev
[ 4955.493] (II) UnloadModule: "fbdev"
[ 4955.493] (II) Unloading fbdev
[ 4955.493] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 4955.493] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 4955.496] (--) using VT number 7
[ 4955.508] (II) intel(0): using device path '/dev/dri/card0'
[ 4955.509] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4955.509] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 4955.509] (==) intel(0): RGB weight 888
[ 4955.509] (==) intel(0): Default visual is TrueColor
[ 4955.509] (--) intel(0): Integrated Graphics Chipset: Intel(R) i830M
[ 4955.509] (**) intel(0): Relaxed fencing disabled
[ 4955.509] (**) intel(0): Wait on SwapBuffers? enabled
[ 4955.509] (**) intel(0): Triple buffering? enabled
[ 4955.509] (**) intel(0): Framebuffer tiled
[ 4955.510] (**) intel(0): Pixmaps tiled
[ 4955.510] (**) intel(0): 3D buffers tiled
[ 4955.510] (**) intel(0): SwapBuffers wait enabled
[ 4955.510] (==) intel(0): video overlay key set to 0x101fe
[ 4955.593] (II) intel(0): Output VGA1 has no monitor section
[ 4955.593] (II) intel(0): Output LVDS1 has no monitor section
[ 4955.594] (--) intel(0): found backlight control interface /sys/class/backlight/thinkpad_screen
[ 4955.676] (II) intel(0): EDID for output VGA1
[ 4955.677] (II) intel(0): Printing probed modes for output VGA1
[ 4955.677] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 4955.677] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 4955.677] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 4955.677] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 4955.677] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 4955.677] (II) intel(0): EDID for output LVDS1
[ 4955.677] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 4955.677] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 4955.677] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 4955.677] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 4955.678] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 4955.678] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 4955.678] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 4955.678] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 4955.678] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 4955.678] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 4955.678] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 4955.678] (II) intel(0): Printing probed modes for output LVDS1
[ 4955.678] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz P)
[ 4955.678] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 4955.678] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 4955.678] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 4955.678] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 4955.678] (II) intel(0): Output VGA1 connected
[ 4955.678] (II) intel(0): Output LVDS1 connected
[ 4955.678] (II) intel(0): Using exact sizes for initial modes
[ 4955.678] (II) intel(0): Output VGA1 using initial mode 1024x768
[ 4955.678] (II) intel(0): Output LVDS1 using initial mode 1024x768
[ 4955.678] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 4955.678] (II) intel(0): Kernel page flipping support detected, enabling
[ 4955.678] (==) intel(0): DPI set to (96, 96)
[ 4955.678] (II) Loading sub module "fb"
[ 4955.678] (II) LoadModule: "fb"
[ 4955.679] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4955.679] (II) Module fb: vendor="X.Org Foundation"
[ 4955.679] compiled for 1.13.0, module version = 1.0.0
[ 4955.679] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4955.679] (II) Loading sub module "dri2"
[ 4955.679] (II) LoadModule: "dri2"
[ 4955.680] (II) Module "dri2" already built-in
[ 4955.680] (==) Depth 24 pixmap format is 32 bpp
[ 4955.680] (II) intel(0): [DRI2] Setup complete
[ 4955.680] (II) intel(0): [DRI2] DRI driver: i915
[ 4955.680] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[ 4955.680] (II) UXA(0): Driver registered support for the following operations:
[ 4955.680] (II) solid
[ 4955.680] (II) copy
[ 4955.680] (II) composite (RENDER acceleration)
[ 4955.680] (II) put_image
[ 4955.680] (II) get_image
[ 4955.680] (==) intel(0): Backing store disabled
[ 4955.680] (==) intel(0): Silken mouse enabled
[ 4955.681] (II) intel(0): Initializing HW Cursor
[ 4955.681] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 4955.684] (==) intel(0): DPMS enabled
[ 4955.684] (==) intel(0): Intel XvMC decoder disabled
[ 4955.684] (II) intel(0): Set up overlay video
[ 4955.684] (II) intel(0): direct rendering: DRI2 Enabled
[ 4955.684] (==) intel(0): hotplug detection: "enabled"
[ 4955.983] (--) RandR disabled
[ 4956.021] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 4956.021] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 4956.021] (II) AIGLX: enabled GLX_ARB_create_context
[ 4956.021] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 4956.021] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 4956.021] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 4956.021] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 4956.021] (II) AIGLX: Loaded and initialized i915
[ 4956.022] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 4956.023] (II) intel(0): Setting screen physical size to 270 x 203
[ 4956.124] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 4956.124] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4956.124] (II) LoadModule: "evdev"
[ 4956.124] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4956.125] (II) Module evdev: vendor="X.Org Foundation"
[ 4956.125] compiled for 1.13.0, module version = 2.7.3
[ 4956.125] Module class: X.Org XInput Driver
[ 4956.125] ABI class: X.Org XInput driver, version 18.0
[ 4956.125] (II) Using input driver 'evdev' for 'Power Button'
[ 4956.125] (**) Power Button: always reports core events
[ 4956.125] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 4956.126] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 4956.126] (--) evdev: Power Button: Found keys
[ 4956.126] (II) evdev: Power Button: Configuring as keyboard
[ 4956.126] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 4956.126] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 4956.126] (**) Option "xkb_rules" "evdev"
[ 4956.126] (**) Option "xkb_model" "evdev"
[ 4956.126] (**) Option "xkb_layout" "us"
[ 4956.197] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 4956.198] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 4956.198] (II) Using input driver 'evdev' for 'Video Bus'
[ 4956.198] (**) Video Bus: always reports core events
[ 4956.198] (**) evdev: Video Bus: Device: "/dev/input/event2"
[ 4956.198] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 4956.198] (--) evdev: Video Bus: Found keys
[ 4956.198] (II) evdev: Video Bus: Configuring as keyboard
[ 4956.198] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input2/event2"
[ 4956.198] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 4956.198] (**) Option "xkb_rules" "evdev"
[ 4956.198] (**) Option "xkb_model" "evdev"
[ 4956.198] (**) Option "xkb_layout" "us"
[ 4956.200] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 4956.200] (II) No input driver specified, ignoring this device.
[ 4956.200] (II) This device may have been added with another device file.
[ 4956.201] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 4956.201] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 4956.201] (II) Using input driver 'evdev' for 'Sleep Button'
[ 4956.202] (**) Sleep Button: always reports core events
[ 4956.202] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 4956.202] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 4956.202] (--) evdev: Sleep Button: Found keys
[ 4956.202] (II) evdev: Sleep Button: Configuring as keyboard
[ 4956.202] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[ 4956.202] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 4956.202] (**) Option "xkb_rules" "evdev"
[ 4956.202] (**) Option "xkb_model" "evdev"
[ 4956.202] (**) Option "xkb_layout" "us"
[ 4956.204] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 4956.205] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 4956.205] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 4956.205] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 4956.205] (**) AT Translated Set 2 keyboard: always reports core events
[ 4956.205] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 4956.205] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 4956.205] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 4956.205] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 4956.205] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 4956.205] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 4956.205] (**) Option "xkb_rules" "evdev"
[ 4956.206] (**) Option "xkb_model" "evdev"
[ 4956.206] (**) Option "xkb_layout" "us"
[ 4956.208] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event6)
[ 4956.208] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 4956.208] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 4956.208] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 4956.208] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event6"
[ 4956.208] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 4956.208] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 4956.208] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 4956.208] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 4956.208] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 4956.208] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 4956.208] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 4956.208] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[ 4956.208] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 10)
[ 4956.209] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 4956.209] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 4956.209] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 4956.209] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 4956.209] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 4956.210] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse0)
[ 4956.210] (II) No input driver specified, ignoring this device.
[ 4956.210] (II) This device may have been added with another device file.
[ 4956.211] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 4956.211] (II) No input driver specified, ignoring this device.
[ 4956.211] (II) This device may have been added with another device file.
[ 4956.213] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event7)
[ 4956.213] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 4956.213] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 4956.213] (**) ThinkPad Extra Buttons: always reports core events
[ 4956.213] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event7"
[ 4956.214] (--) evdev: ThinkPad Extra Buttons: Vendor 0x1014 Product 0x5054
[ 4956.214] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 4956.214] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 4956.214] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input7/event7"
[ 4956.214] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 11)
[ 4956.214] (**) Option "xkb_rules" "evdev"
[ 4956.214] (**) Option "xkb_model" "evdev"
[ 4956.214] (**) Option "xkb_layout" "us"
[ 4960.630] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 4964.186] (II) evdev: ThinkPad Extra Buttons: Close
[ 4964.189] (II) UnloadModule: "evdev"
[ 4964.189] (II) evdev: TPPS/2 IBM TrackPoint: Close
[ 4964.189] (II) UnloadModule: "evdev"
[ 4964.189] (II) evdev: AT Translated Set 2 keyboard: Close
[ 4964.189] (II) UnloadModule: "evdev"
[ 4964.189] (II) evdev: Sleep Button: Close
[ 4964.189] (II) UnloadModule: "evdev"
[ 4964.189] (II) evdev: Video Bus: Close
[ 4964.190] (II) UnloadModule: "evdev"
[ 4964.190] (II) evdev: Power Button: Close
[ 4964.190] (II) UnloadModule: "evdev"
[ 4964.192] Server terminated successfully (0). Closing log file.

karol wrote:
Leonid.I wrote:@0x001A4:
To run twm, you need to install xorg-twm from [extra] (I am not sure if it installs by default). Do you have xterm installed?
According to his first post he has both xorg-twm and xterm installed.
I do indeed.
I went ahead and installed LXDE anyways, just to see what would happen. Exact same thing, it looks like everything is about to load but only the mouse cursor shows up. My Xorg.0.log is the same, so I won't post it again.
I do get an error in the console about the openbox menu.xml file missing but I doubt that's related.
X.Org X Server 1.13.0
Release Date: 2012-09-05
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.6.0-1-ARCH i686
Current Operating System: Linux x_00294-ibc 3.5.6-1-ARCH #1 SMP PREEMPT Sun Oct 7 19:33:50 CEST 2012 i686
Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=ec6a9a60-8d8c-4de0-960b-9e2a044d0ca5 ro quiet
Build Date: 05 October 2012 02:01:30PM
Current version of pixman: 0.26.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct 15 18:12:28 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
Openbox-Message: Unable to find a valid menu file "/usr/share/lxde/openbox/menu.xml"
xinit: connection to X server lost
waiting for X server to shut down pcmanfm: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0"
after 2326 requests (2323 known processed) with 0 events remaining.
Server terminated successfully (0). Closing log file.
xinit: unexpected signal 2
.xinitrc for my user
exec ck-launch-session startlxde
Very wierd.

Frozen screen with no connection with mouse or keyboard

Hello,
My iMac has frozen on the start up page. I googled what might be wrong and came up with a bluetooth connection problem. So, I bought a wired mouse and it still won't 'wake up'. The wired mouse doesn't work either. Anyone got any suggestions? Thanks in advance for any techy help!
Em

Reboot and immediately hold down the Alt/Option key during the sound that Linc mentioned, until a grey screen with a choice of boot disks appears. Choose your Mac OS X boot disk.

I am going to sell my second generation ipod touch, so i resetted it to factory defaults. It said it would take up to an hour, and i patiently waited. But when the black and white loading bar completed, the ipod went to the black screen with an apple logo

I am going to sell my second generation ipod touch, so i resetted it to factory defaults. It said it would take up to an hour, and i patiently waited. But when the black and white loading bar completed, the ipod went to the black screen with an apple logo on it. Sounds about right, right? But now, there is a processing circle on top of the logo, but the circle spins once, and stops at about halfway to the bottom. It just stays there, and about every half to one hour it becomes a white screen and starts all over again. (not the loading bar part, just the circle). I've tried holding the power and the home button, and it works, but it just goes back to the circle screen with the apple logo. HELP PLEASE?

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Windows Server 2008 black screen with mouse *PLEASE HELP*

Hello fellow techs,
I have been tearing my hair out for the past 12hrs on this issue.
About 3 weeks ago, one of our clients reported that they were experiencing
issues on the network so one of the staff went into the server room and noticed
the screen was black with only the cursor. As they couldn't reboot, they
decided to hold the power button to power it off. When they powered it back
up, it went passed the windows loading
splash screen, and again the screen is black with
the mouse pointer in the center of the screen.
I am diagnosing the server and find that at the black screen, I’m able to move
the cursor and beyond that nothing happened. I started in safe mode with the
exact same results.
I have been trying many different solutions from posts that I have found in
Google but no change.
From other machines you can type \\servername in
the run box and see the shared folders, as well as ping it.
This is a very urgent request as I need to have the Server back up and running
by tomorrow.
I am quiet willing to pay for phone support with anyone that can assist as soon
as possible. I am happy to transfer founds via Paypal.<o:p></o:p>
PLEASE HELP!

Hi,
I agree with sm, you should give us more details. Also you should use sfc /scannow
command to scans the integrity of all protected system files and repairs files with problems when possible. For more details, please refer to the following article.
Sfc
http://technet.microsoft.com/en-us/library/ff950779.aspx
Before going further, would you please let me know whether there were any changes on the affected server? Has windows update or any new device been added? Please also check your shadow copies.
The Windows Server black screen may be caused by them.
In addition, there are similar questions, please refer to.
Windows Server 2008 black screen
http://social.technet.microsoft.com/Forums/en-US/463b529b-26a6-4d5d-88f5-7d8b3460d165/black-screen-windows-2008-r2
Windows Server 2008 and the Black Screen of Waiting
http://projectdream.org/wordpress/2009/03/03/windows-server-2008-and-the-black-screen-of-waiting/
By a way, you also can be able to boot into last know good configuration to solve the trouble. You can refer to the following similar question that provide the detailed operations.
Windows Server 2008 black screen with only the mouse pointer showing
http://social.technet.microsoft.com/Forums/en-US/5c878af8-78f2-430d-9530-a0e5ad73ff03/windows-server-2008-black-screen-with-only-the-mouse-pointer-showing
Hope this helps.
Best regards,
Justin Gu

C655D 5210 tosiba black screen with mouse pointer

I have only had this computer for 8 months. One day I turned it on, and windows kept restarting. After a few trouble shooting steps off the internet, I decided to reinstall windows 7 and lose my data and start all over. The first time it could not repair the computer and asked me to send the information to microsoft. Cannot boot in safe mode, I can get to the setup utility screen. This is a new Windows 7 cd. After several tries, it installed and said it had to restart, (this may happen several times) it only restarted once, then a black screen with a cursor. When I try to boot from the cd, the windows logo apppears, then a black screen with mouse pointer again. Toshiba is no help at all. This is my third Toshiba laptop. The first one did the same thing. But it was out of warranty, the amount they wanted to charge us, i just got another one. My mom's Toshiba just died with no real reason, the old one is in the garbage, and this one is only 8 months old. Toshiba would like us to send the computer in, pay for shipping, wait for 3 weeks, pay to ship it back to us, with a promise that it may not work.
Please help
here is the error message when trying to install windows 7
file:\Boot\BCD
Statu" 0xc000000f
An error occured while attempting to read the boot configuration.

Hi, last try is to install os manually, a clean os Install (way to go here)
regards KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Garbled mouse on second screen with ati

Similar Messages

Maybe you are looking for