Gateway 2.0 install to CRM OCS package SAPK-250AGINIWFND does not match

i try to install gateway 2.0 in crm 7.31.
i have successfull install gw-core 200,i have already the WEBCUI 731, but when i go to install the second package (IW-FND 250) the saint return me this error.
OCS package SAPK-250AGINIWFND does not match
current software component vector
I have update my spam-saint but nothing change.
Could you help me?
Best Regards
Andrea Preziuso

ok i find the solution note:
1901938 - Unable to install Add on SAP NW Gateway 2.0 - IW_FND 250
However to define the queue in SAINT or to install the add-on on a NW731 system please include the released ACP(attribute change package) for the addon "IW_FND====250" released in SMP.
http://service.sap.com/swdc
->Search for Support Packages and Patches
->IW_FND====250

Similar Messages

OCS package SAPK-603DHINISUT does not match the current software component

I'm getting an error in my installation of EHPI4 using the SAPehi tool in the PREP_EXTENSION/EHP_INCLUSION stage that says: OCS package SAPK-603DHINISUT does not match the current software component.
The SPDA_EHP_INCLUSION.log says " Calculate pure CRT Queue" "for installed Add-ons" "and already applied Support Packages" " "
3 ETN112 The OCS Package Queue is empty
2 ETN085X"2. Adding Add-on Installation Queue" " " " " " "
3 ETN245 The following import prerequisites of OCS Package "SAPK-603DHINISUT" have not been met:
3 ETN264   In the (alternatively) Requirement set "01":
3WETN493 Not allowed software component "ECC-SE" rel."600" is installed
3 ETN264   In the (alternatively) Requirement set "02":
3WETN493 Not allowed software component "ECC-SE" rel."600" is installed
3WETN492 Required Add-On component "IS-UT" rel."602" is not installed
3 ETN264   In the (alternatively) Requirement set "03":
3WETN493 Not allowed software component "ECC-SE" rel."600" is installed
3WETN493 Not allowed software component "ECC-VPACK" rel."*" is installed
2WETN543 OCS package "SAPK-603DHINISUT" does not match the current software component vector"
I have added the package IS-UT 602 along with all the support packs that go with the IS-UT 602 component but I am still recieving this error. Would anyone have an idea on how to correct this? Any help would be greatly appreciated. Thank you!

I ended up solving the issue with note #1150349. I had to go into transaction SEPS -> INBOX there where several versions of the ACP
IS-UT=====603:
Origin Number Ext. Subject Delivery date/time
CSR0120031469 0032968 PAT IS-UT=====603 07.10.2009 15:30:27
CSR0120031469 0032633 PAT IS-UT=====603 14.10.2009 21:19:46
delete them all out in SEPS and in the EPS\IN folder. Load teh ACP files from the note which corrected the issue. Thank you again for your help!

OCS package SAPK-60501INEAPS does not match the current software component

Hi Friends.
I installed NetWeaver 7.02 with ECC 605. When I try to update EA-PS component (SAPKGPPD16) with SPAM (7.02/0043) to SAPK-60501INEAPS, I got the following errors:
- OCS package SAPK-60501INEAPS does not match the current software component vector
- EA-PS,605 Non-permitted release of add-on EA-PS installed

I downloaded K-605DHINEAPS.SAR from marketplace.
In the note 1456663 there is a workaround for SEM_BW and FINBASIS components.
"Load ACP (attribute change package).
Before starting the installation of SEM_BW or FINBASIS load the attached file "ACP_EHP5_on_NW702.SAR" into your system (Transaction SPAM -> Support Package -> Load Packages -> from Frontend). Otherwise the installation will require a stack XML file which cannot be provided for this scenario."
My question is, I just can generate the stack XML file with Solution Manager?
Best regards.
Cesar Teixeira

EHP4 Upgrade: OCS package "SAPK-110EXINMED" does not match SW component

Hi!
I would like to upgrade SAP ERP 6.0 to EhP4.
During the phase PREP_EXTENSION/ADDON_QCALC (Configuration) I was asked regarding the procedure of 2 Add ons: ST A/PI and MED.
I answered the question that I would like to update the components with SAINT.
During the Add on queue calculation by tool I get the following error:
OCS package SAPK-110EXINMED does not match the current software component
3 ETN256 You want to install the following add-on components:
3 ETN248    Component: "MED" rel. "110_600", Support Package level: "0" (component type "C")
2 ETN085X"2. Adding Add-on Installation Queue" " " " " " "
3 ETN262    Calculating queue part for add-on "MED" rel. "110_600"
3 ETN490 Use the Add-On installation package "SAPK-110CHINMED" (type &4"AOU") for Add-On &2"MED" rel.&3"110_600"
3 ETN245 The following import prerequisites of OCS Package "SAPK-110CHINMED" have not been met:
3 ETN264   In the (alternatively) Requirement set "01":
3WETN492 Required Add-On component "IS-H" rel."600" is not installed
3WETN491 Required software component "SAP_APPL" rel."600" is not installed
3 ETN490 Use the Add-On installation package "SAPK-110COINMED" (type &4"AOI") for Add-On &2"MED" rel.&3"110_600"
3 ETN245 The following import prerequisites of OCS Package "SAPK-110COINMED" have not been met:
3 ETN264   In the (alternatively) Requirement set "01":
3WETN492 Required Add-On component "IS-H" rel."600" is not installed
3WETN491 Required software component "SAP_APPL" rel."600" is not installed3 ETN490 Use the Add-On installation package "SAPK-110EXINMED" (type &4"AOX") for Add-On &2"MED" rel.&3"110_600"
3 ETN245 The following import prerequisites of OCS Package "SAPK-110EXINMED" have not been met:
3 ETN264   In the (alternatively) Requirement set "01":
3WETN492 Required Add-On component "IS-H" rel."600" is not installed
3WETN491 Required software component "SAP_APPL" rel."600" is not installed
2WETN543 OCS package "SAPK-110EXINMED" does not match the current software component vector
Can some one help me to help with this issue?
Thank you very much!
regards
Jürgen

Hi,
have you checked if all your addons are compatible with ehp4? There is an OSS note dedicated to it. Please check note 1226284. Check also notes related to this note. It looks to many OSS notes related to ehp4
Cheers
Edited by: Martin Voros on Mar 22, 2009 11:29 PM

ECC-SE OCS package SAPK-604GGINECCSE does not match the current.

HI all,
We are in process of upgrading ECC 5.0 to ECC 6.0 EHP4 SR1 SP3.
In our source system there is no Base component of ECC-SE .
As part of upgrade to ECC 6.0 EHP4 we have included this component when selecting stack in Solution manager.
But during Configuration phase in ENHANCEMENT PACK INCLUSION we are get the below error message.
Severe error(s) occured in phase PREP_EXTENSION/EHP_INCLUSION!
Last error code set: Unable to generate addon queue. Return Code = 1,
Reason = "OCS package SAPK-604GGINECCSE does not match the current
software component vect", check log file 'SPDA_EHP_INCLUSION.LOG' for details
3 ETN262    Calculating queue part for add-on "ECC-SE" rel. "604"
3 ETN490 Use the Add-On installation package "SAPK-604GGINECCSE" (type &4"AOX") for Add-On &2"ECC-SE"
rel.&3"604"
3 ETN245 The following import prerequisites of OCS Package "SAPK-604GGINECCSE" have not been met:
3 ETN264   In the (alternatively) Requirement set "01":
3WETN492 Required Add-On component "EA-HR" rel."600" is not installed
3WETN492 Required Add-On component "ECC-SE" rel."501" is not installed
3WETN491 Required software component "SAP_APPL" rel."600" is not installed
3WETN491 Required software component "SAP_HR" rel."600" is not installed
3 ETN264   In the (alternatively) Requirement set "02":
3WETN492 Required Add-On component "ECC-SE" rel."501" is not installed
3 ETN264   In the (alternatively) Requirement set "03":
3WETN492 Required Add-On component "EA-HR" rel."600" is not installed
3WETN492 Required Add-On component "ECC-SE" rel."501" is not installed
3WETN491 Required software component "SAP_HR" rel."600" is not installed
3 ETN264   In the (alternatively) Requirement set "04":
3WETN492 Required Add-On component "ECC-SE" rel."501" is not installed
3WETN491 Required software component "SAP_APPL" rel."600" is not installed
2WETN543 OCS package "SAPK-604GGINECCSE" does not match the current software component vector
1 ETN214X."**************************************************"
1 ETN251   End of phase: "'Add-on Queue Calculation'"
1 ETN254       End date: "19.07.2009"
1 ETN255       End time: "05:32:23"
Please advice me on the following

hi sunny,
SPAM is 35 ... well i have got stucked for ECC-SE 604 add-on isnot getting recognized in ssystem during upgrade as it didi not found any base component.
3 ETN262 Calculating queue part for add-on "ECC-SE" rel. "604"
3 ETN490 Use the Add-On installation package "SAPK-604GGINECCSE" (type &4"AOX") for Add-On &2"ECC-SE"
rel.&3"604"
3 ETN245 The following import prerequisites of OCS Package "SAPK-604GGINECCSE" have not been met:
3 ETN264 In the (alternatively) Requirement set "01":
3WETN492 Required Add-On component "EA-HR" rel."600" is not installed
3WETN492 Required Add-On component "ECC-SE" rel."501" is not installed
3WETN491 Required software component "SAP_APPL" rel."600" is not installed
3WETN491 Required software component "SAP_HR" rel."600" is not installed
3 ETN264 In the (alternatively) Requirement set "02":
3WETN492 Required Add-On component "ECC-SE" rel."501" is not installed
3 ETN264 In the (alternatively) Requirement set "03":
3WETN492 Required Add-On component "EA-HR" rel."600" is not installed
3WETN492 Required Add-On component "ECC-SE" rel."501" is not installed
3WETN491 Required software component "SAP_HR" rel."600" is not installed
3 ETN264 In the (alternatively) Requirement set "04":
3WETN492 Required Add-On component "ECC-SE" rel."501" is not installed
3WETN491 Required software component "SAP_APPL" rel."600" is not installed
2WETN543 OCS package "SAPK-604GGINECCSE" does not match the current software component vector
1 ETN214X."**************************************************"
1 ETN251 End of phase: "'Add-on Queue Calculation'"
1 ETN254 End date: "19.07.2009"
1 ETN255 End time: "05:32:23"
from tha above log i have considered set 2 & follwoed with sap note
1150350 Upgrade to SAP ECC 600 with Add-On ECC-SE 604
therefore it went smoothly with out issues in EHP_INCLUSION ....
-rahul

CRM Sales Order Item Status Does Not match R/3 Item Status

The status of the CRM sales order item is being set to 'In Process' when the related R/3 sales order line item status is set to 'Complete' - when, the delivery quantity is zero for the sales order item. This happens when the warehouse can't find the stock to pick - the delivery quantity is set to zero. Thus, the CRM order item status does not agree with the R/3 order item status. We need for the line item status to be set to 'Complete' in CRM. Anyone have an idea as to how to make this happen?
Thanks you.

Hi Peter and Suresh,
From the information provided I understand that the sales order created in CRM after replication to R/3 has some status change.
1. What are the fields which are updated in R/3 for the sales order created in CRM ?
2. If sales order fields are updated in R/3 are these updates reflected back to CRM?
3. If they are reflected back in CRM? Is there still flexibility for sales order to be changed in CRM and replicated back to R/3?
Can you please share you experiences.. Any help is highly appreciated.
Thanks
Jothi

Eclipse error : The declared package does not match the expected package

I'm trying to setup an Eclipse project on some existing code but I can't get past this error. The source files are in the following directories:
d:\mycompany\coolstuff
d:\mycompany\neatstuff
The source files in the coolstuff directory have a package statement:
package mycompay.coolstuff
The source files in the neatstuff directory have a package statement:
package mycompany.neatstuff
I create a new Eclipse Java project, specify the existing directoy of d:\mycompany. When Eclipse tries to build, it gives the following error:
The declared package "mycompany.coolstuff" does not match the expected package "coolstuff"
I've tried everything I can think of short of modifying every package statement since they seem correct based on the Java documentation. What am I missing?

All the source builds just fine using a command
nd line and a classpath=.\That's meaningless, since classpath=.\ is just setting the classpath to the current directory.
d:\mycompany\coolstuff
d:\mycompany\neatstuff
The source files in the coolstuff directory have a
package statement:
package mycompay.coolstuff
The source files in the neatstuff directory have a
package statement:
package mycompany.neatstuff
I create a new Eclipse Java project, specify the
existing directoy of d:\mycompany.When you use the package statement "package mycompay.coolstuff" Eclipse looks in the directory above mycompany for mycompay\coolstuff\<classname>, and that directory is d:\, not d:\mycompany.
When Eclipse
tries to build, it gives the following error:
The declared package "mycompany.coolstuff" does not
match the expected package "coolstuff"

Installing ST-A/PI Addon : "OCS package SAPKITAB9L does not match the current software component vector"

Dear Gurus,
When i try to install ST-A/PI Addon from SPAM and select queue : OCS package SAPKITAB9L does not match the current software component vector
My downloads ;
1 - SAPKITAB9J ==> CSN0120061532_0073055.PAT (ST-A/PI , 01Q_731 , Package Level=0000) downloaded from
ST-A/PI 01Q_731 (INSTALLATIONS AND UPGRADES)
2 - SAPKITAB9K==> CSR0120031469_0081131.PAT (ST-A/PI , 01Q_731 , Package Level=0001) downloaded from
ST-A/PI 01Q_731 (SUPPORT PACKAGES AND PATCHES)
3 - SAPKITAB9L==> CSR0120031469_0076956.PAT   (ST-A/PI , 01Q_731 , Package Level=0002)
ST-A/PI 01Q_731 (SUPPORT PACKAGES AND PATCHES)
I placed them under EPS and uploaded succesfully when i "Load Packages" from " "from Application Server"
What could be problem ?
Here is system components ;
SAP_BASIS
740
0005
SAPKB74005
SAP Basis Component
SAP_ABA
740
0005
SAPKA74005
Cross-Application Component
SAP_GWFND
740
0005
SAPK-74005INSAPGWFND
SAP Gateway Foundation 7.40
SAP_UI
740
0006
SAPK-74006INSAPUI
User Interface Technology 7.40
PI_BASIS
740
0005
SAPK-74005INPIBASIS
Basis Plug-In
ST-PI
2008_1_710
0007
SAPKITLRE7
SAP Solution Tools Plug-In
BI_CONT
757
0001
SAPK-75701INBICONT
Business Intelligence Content
BI_CONT_XT
757
0001
SAPK-75701INBICONTXT
Business Intelligence Content for Bobj I
SAP_BW
740
0005
SAPKW74005
SAP Business Warehouse
CPMBPC
801
0005
SAPK-80105INCPMBPC
CPM Business Planning and Consolidation
POASBC
100_731
0005
SAPK-10205INPOASBC
POA Shared Business Components

in 000 client but now i am getting DUMP ;
Category               ABAP Programming Error
Runtime Errors         CALLBACK_REJECTED_BY_WHITELIST
ABAP Program           SAPLSTPA
Application Component BC-CTS
What happened?
    An RFC callback has been prevented due to no corresponding whitelist
    entry being configured. The original RFC called function module "RFC_TP" in
    the target system with destination "CALLTP_WindowsNT". The callback called
     function
    module "TRINT_PROGRESS_INDICATOR" in its own system.
Error analysis
    Function module "RFC_TP" was called. This execute an RFC callback via ABAP
    statement CALL FUNCTION 'TRINT_PROGRESS_INDICATOR' DESTINATION 'BACK'
    . This action resulted in this ABAP short dump.
    This action was triggered explicitly by the application in transaction
    "SAINT               " and in ABAP main program "SAPLSAINT_UI".

OCS package SAPKITAC4E does not match the current software component vector

Hello Experts,
I am running EHP4 upgrade on ECC system, I have downloaded files from MOPZ, I got an error message in PREP_EXTENSION/SUBMOD_EXTENSION_NEW/EHP_INCLUSION, error is as follows,
Last error code set: Unable to generate addon queue. Return Code = 1, Reason = "OCS package SAPKITAC4E does not match the current software component vector", check log file 'SPDA_EHP_INCLUSION.LOG' for details
As per the log 'SPDA_EHP_INCLUSION.LOG' it is looking for BBP CRM patches, error message is as follows,
3 ETN490 Use the Add-On installation package "SAPKITAC4E" (type &4"AOI") for Add-On &2"ST-A/PI" rel.&3"01M_CRM570"
3 ETN245 The following import prerequisites of OCS Package "SAPKITAC4E" have not been met:
3 ETN264   In the (alternatively) Requirement set "01":
3WETN491 Required software component "BBPCRM" rel."500" is not installed
3 ETN264   In the (alternatively) Requirement set "02":
3WETN491 Required software component "BBPCRM" rel."510" is not installed
3 ETN264   In the (alternatively) Requirement set "03":
3WETN491 Required software component "BBPCRM" rel."520" is not installed
3 ETN264   In the (alternatively) Requirement set "04":
3WETN491 Required software component "BBPCRM" rel."600" is not installed
3 ETN264   In the (alternatively) Requirement set "05":
3WETN491 Required software component "BBPCRM" rel."700" is not installed
3 ETN264   In the (alternatively) Requirement set "06":
3WETN491 Required software component "BBPCRM" rel."701" is not installed
2WETN543 OCS package "SAPKITAC4E" does not match the current software component vector
1 ETN214X."**************************************************"
1 ETN251   End of phase: "'Add-on Queue Calculation'"
1 ETN254       End date: "02.08.2011"
1 ETN255       End time: "23:30:08"
1 ETN214 ."**************************************************"
BBP CRM is not installed in our ECC system, I am not sure why it is required.
Can you please advise me how to move forward without installing BBPCRM.
Regards,
Fazil

If someone one found the following errors during SAP ECC6-EHP6 implementation with Software Update Manager:
1:
Error message set: 'Unable to generate addon queue. Return Code = 1, Reason = "Extended attribute STACK_XML_REQUIRED for SAPK-100AHINUI2FND is unknown"
Solution:
Please update the SPAM/SAINT version with latest available at OSS site, then restart the implementation with INIT option.
2:
Error message set: 'RFC error system DEV nr 00 function 'SPDA_READ_NEW_PACKAGES' failed with code 3 key CALL_FUNCTION_NOT_FOUND: Function module "OCS_CHECK_PATH_CONSISTENCY" not found.
Restart the Software Update Manager and SAP instance. If possible then update SAP Kernel with latest available patch, R3trans and tp as well.
Regards.

OCS package does not match the current software component vector

Hello TECHIES,
Please help me with following error it is very emergency
We had developed an ADD-ON in CRM7.0 and when we try to Install in it into CRM EHP1 server
we get the following error:
OCS package does not match the current software component vector"

"emergency" errors should be handled through OSS/CSN, not here on the forum.
The error message means that the source system has a different support package level than the target system.
Markus

SPAM/SAINT - OCS package does not match current software component vector

Hello Experts,
This could happen on any type of system I suspect, but it is on my Solution Manager (7.01 on Eh1). I downloaded a support stack (27)and was checking the components requirements. I use the Directory box in SPAM, and I go into New Support Packages. I highlight the support package for ST 400 then click on the Queue button. It comes back with this message: OCS package SAPKITL437 does not match the current software component vector.
I click continue and the requirements window comes up. It shows that I have currently loaded the wrong BI_Content. It says: Non-permitted release of add-on BI_CONT installed. The release information is BI_CONT,706.
If I go back to the main window to look at the current package level, I see that BI_CONT component release (loaded) is 704 - sp 8.
I must have gotten very creative when loading that back in 2008. MOPZ was used, but it was before the support stack restrictions were in place on my system.
I can't get around this issue, because even trying to load the Basis support package I get this message.
If anyone has had the problem and knows what to do I would appreciate some help. Notes searching has not found anything. So far my Customer message has not been helpfull, but it is not SAP support .
Pat

Hi Patricia,
Please, check prerequisites for SAPKITL437 in SPAM.
It seems like you need to install/update some components in SAINT before.
From official note: https://service.sap.com/sap/support/notes/1274287
"Requirements with component ST400 for SP27
- Support Package 00 for BI_CONT 706 (SAPK-706BHINBICONT)
- Support Package 00 for ST-BCO 400 (SAPK-400AGINSTBCO)"
Additional info: https://service.sap.com/sap/support/notes/1169247
Best Regards,
Aleh
Edited by: Aleh Mikhniuk on Jul 20, 2011 1:59 PM

Ocs package does not match the current software components

Hi Experts,
In our SAP ERP 6.0 system few components like SAP APPL,EA APPL ,FinBasis were already upgraded to 603 SP04 long time back.
Now to install language,we need to upgrade all the components to EHP3.The pre requisite to upgrade to EHP3 as per note number 1095233 is SP08.Few of our components are at SP06 level and i downloaded the supported packages of all the components to upgrade to SP08 and then upgrade to EHP3.
When i try to display/define the component ECC-DIMp,i get the eror message message" ocs package does not match the current software componentu201D when trying to apply ECC-DIMPu201D .When i looked at the queue,the SPAM is looking for prerequisites of components EA APPL 600 and SAP APPL 600(This components are already upgraded to 603 level).
Please suggest me the option.
Thanks
satish

Hi,
For your problem, please check SAP note 1083533, please check extract from this note:
If you cannot integrate the required component Support Packages because the import conditions are not met (for example, because you have already installed SAP_APPL 603 although SAP_APPL 600 is the prerequisite), you must update the import conditions. When you try to install EHP3 packages using the EHP installer (EHPI), the following error occurs in SPDA_EHP_INCLUSION.LOG: "OCS package SAPKxxx does not match the current software component vector" Ths system displays the same error message when you try to install packages using transaction SAINT. Proceed as described in Note 1118803.
Solution is documented in the SAP note 1118803.
Thanks
Sunny

OCS package SAPKIPYJ61 does not match

Hi Expert
When I am applying pi_basis patches that time gives error
OCS package SAPKIPYJ61 does not match the current software component vector
SAPKIPYJ61
PI_BASIS,2005_1_640 Non-permitted release of add-on PI_BASIS installed
regds
Rahul

Hello,
There're 2 kinds of packages: SAINT Packages and Support packages. For SAINT pacakges, they're the installation of a component, whicle support package are the patches for the component.
Which packge were you installing when you go the error:
'PI_BASIS,2005_1_640 Non-permitted release of add-on PI_BASIS installed'?
Can you please provide the name? I assume it's a SAINT pacakges. The package SAPKIPYJ61 is a support package.
Regards,
Joe

OCS package SAPKITL437 does not match the current software component vector

I am trying to apply SAPKB70108 in SOLMAN 7.1 ehp1. SPAM=KD70143, got error OCS package SAPKITL437 does not match the current software component vector
Lalit Kumar

I have posted single time but due to internet problem, I clicked two times and the same posted twice.. I want to delete one but haven't find delete option...
Lalit Kumar

OCS Package SAPK-1507HINSTPL, tp step A, return 0008

Hi Experts,
System: Solution Manager
DB: Oracle
OS: Windows 2003 Server 32bits
When I was to proceed a importing of EHP1 I stay stuck in SAINT in importing phase DDIC_ACTIVATION and the error/warning is:
- Error in phase: DDIC_ACTIVATION
- Reason for error: TP_STEP_FAILURE
- Return code: 0008
- Error message: OCS Package SAPK-1507HINSTPL, tp step A,
return code 0008
My kernel is 23 , 701
Any clue?

In the Window popping up you get information, what logs you need to check.
You can also check in SAINT
Goto --> Import Logs --> Installation Queue
Markus

Gateway 2.0 install to CRM OCS package SAPK-250AGINIWFND does not match

Similar Messages

Maybe you are looking for