Gateway Failover with CCM 4 1 3b

Hi
I am having issues with gateway redundancy on CCM 4-1-3b. Basically when the Primary route group gateway fails, the backup gateway does not work. You can not make external calls out of this gateway unless you change the priority of the gateways in the route group manually. The only other time it failsover is if ip connectivity fails between the primary gateway and the CCM. Has anyone had any issues like this or is there a bug with this version of CCM? Failover with RG/RL should be a basic feature with CCM?

Hi Derek,
CCM regards H323 gateways as a black hole. CCM does not have the ability see the busy/fail status of the H323 ports. As you said, the only way CCM would switch to the second gateway, in the Route List, would be if IP connectivity was lost.
I would recommend that you additionally configuring outbound VOIP dial-peers (with a higher preference value) to forward the call from your first gateway to your second gateway when the first gateway is up and, for whatever reason, the outward ports are busy or down.
Regards
Chris

Similar Messages

  • UCCE for CCM failover with DNS SRV.

    we are testing UCCE for CCM failover with Local DNS SRV. We have enabled the "Use DNS SRV type query:YES"&"Resolve SRV records locally:1" on CVP Call server configuration SIP tab.
    The srv.xml file updated with CCM  IP addrs in this path \Cisco\CVP\conf\srv.xml
    On testing, the agent state moved to reserved state, but call is not delivered. Static Route is added for Phone Extension as "500>,proxy.ipcc.com".
    What will be the issue? Kindly let me know what needs to be done.
    Thanks & Regards
    JP.

    So, as Markus already figured out, you need to make sure that your CUCM actually understands that it is the intended recipient for these SIP INVITEs. I.e. if you define the static route to point to cucm.cisco.com you have to specificy the specify the Custer FQDN to be cucm.cisco.com under the 'Cluster Wide Domain Settings' in the CUCM Enterprise Parameters.
    A second thing to watch out for the CUCM Group assigned to your SIP Trunks. Each SIP Trunk, like any CUCM device, has a Device Pool, the device pool has a UCM Group defining on which UCM nodes that device 'exists'. For phones that typically means : which UCM nodes can I register to ?
    But for SIP trunks this means : which UCM nodes have a SIP deamon process for this Trunk and so which of the UCM nodes will actually accept INVITEs for this trunk. The most common cause for 503 Service Unavailable is probably this, (not all) the CUCM nodes in your DNS / srv.xml round robin are in the UCM Group assigned to the Device Pool configured on the SIP trunk for this Call Server.
    Cheers,
    Kris

  • Adapter Monitoring with CCMS

    Hi,
    is there anybody who already set up an adapter monitoring  with CCMS using the alert framework of Runtime Workbench ?
    Background:
    When using the existing MTE's in CCMS (J2EE Monitor Templates - All Systems - <SID> - J2EE Applications - SAP XI Adapter Engine) only rare monitoring information related to XI messages are posted.
    What I would like to see are information about the adapters provided in the logfiles of each adapter.
    For example as soon there's a permission problem for a directory in File Adapter an alert in CCMS should be raised.
    I already checked SAP notes 870232, 913858 and 824039.
    Any feedback appreciated.
    Cheers,
      Juergen

    Hi,
      You can configure the CCMS as per the following two blogs,
    Part 1: /people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
    Part 2: /people/sap.user72/blog/2005/12/05/xi-grmg-customizing-for-xi-ccms-heartbeat-monitoring-part-ii
    Configure the Alert Framework with the below Blog as reference,
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
    Then forward the Alerts created in the CCMS to Alert Frame work, the required steps are given in the below help links.
    http://help.sap.com/saphelp_nw04/helpdata/en/3f/567ddea69d3d4c93a6aedabd08899e/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/30/62e77b2f4865488a866d4103923a93/frameset.htm
    Then any alerts that gets generated in CCMS can be passed to the Alert Category kept configured in the Alert Framework.
    Hope this helps you

  • Install Solaris 8 on Gateway Laptop with Windows XP

    I have Gateway laptop with Windows XP pre-installed. Now I want to install Solaris 8 without removing the Windows XP. I wanted to use dual boot option. Can any body advice me if there is any whit paper on this subject(with step by step insturctions). I have partition magic but it can only partition and format to NTFS, FAT, FAT32 and Ext2 (linux only).
    Thanks for your help.
    rambo

    It can be done but the biggest stump is the network interface. I've an Acer 350 series with a built-in NIC. I also use XFree86 because the Xsun doesn't recognize the video card. The biggest problem in getting Solaris x86 working is getting the network interface to work, since the PCMCIA support is horrible. You need to be sure the the components on your laptop conform to the HCL. As for X, just use XFree86.

  • SMS gateway integration with UCCX 7.0

    I have a question, can we perform SMS gateway integration with Cisco Unified Contact Center Express 7.0 premuim license?

    Just to enhance Somar's response a bit: The CCX Premium licnese activates an SMTP subsystem in CCX. This allows you to send emails from within a script. As long as the SMS gateway can accept SMTP you should be able to make it work.

  • Gateway service with multiple entity sets

    Hi,
    I have designed a Gateway service with 3 entities, and 3 entity sets.Entity sets are not related one to another. This entity sets correspond to static data stored in 3 different custom table in SAP. The aim of this service is to provide static data (but customizable on the backend) for drop down lists on a SAP UI5 application consuming Gateway services.
    I am wondering if it is possible through a single read operation, to retrieve all entity sets. Since the service URL to get data related to one entity set is /sap/opu/odata/sap/ZTEST_SERVICE_SRV/EntitySet, how should I process if I want to retrieve all 3 entity sets ? Is it something possible or do we have to call each entity set at once ?
    Thanks in advance for your help.
    Thibault

    Hi Krishna,
    I'd try and avoid a construct like this because I don't think it's very compliant or discoverable - you have to know how to access it. That's maybe acceptable for "internal" services, but really, we should try and use the protocol instead of introducing so many workarounds.
    It seems that the simplicity of OData on some levels makes people think they have got the wrong answer. It can get complex but something like a value list is pretty basic and shouldn't be subject to loads of different interpretations.   
    Batching GET's on the entities or using a grouping entity as per Andre's suggestion is what I'd be thinking of doing. I know that the former is used by some Fiori applications.
    Regards
    Ron.

  • RFC monitor with CCMS

    Hello,
    I'm implementing RFC monitor with CCMS and I have a problem.
    I was able to implement the method with an auto-reaction method of send mail.
    It is working fine but it doesn't repeat the alert!  Let's say, imagine that the RFC isn't working since 3am... we are now at 13pm and the alert is not triggered anymore. In fact, in RZ20 I just see 1 Alert triggered at 3am.
    Is there any way to set this alert to trigger every period of time?
    thanks.
    regards,
    Filipe Vasconcelos

    Hello,
    first it would be good to clarify which monitor are you implementing - there are multiple RFC monitors - for example:
    Availability and Performance Overview Monitor :
    http://help.sap.com/saphelp_nw70/Helpdata/en/ae/cd823bd26a5c42e10000000a114084/frameset.htm
    Transactional RFC and Queued RFC Monitor
    http://help.sap.com/saphelp_nw70/Helpdata/en/8b/ceea3b31aac554e10000000a114084/frameset.htm
    Best to type the name of monitor as displayed in RZ20.
    Based on the type of monitor you might find the answer here:
    http://help.sap.com/saphelp_nw70/Helpdata/en/f6/c55c3bab977239e10000000a114084/frameset.htm
    (for example for status monitor you can set option "When should a message trigger an alert?" to "Always (at every message)")
    Anyway I am afraid that in case you are using performance monitor there is not much you can do. Possibility can be to check if data collection method (for example function) has parameter that can do this (but I am skeptical about this) - if not then you would have to adjust data collection method or implement the monitoring in another way.
    Possibility can be to use some kind of "switch". You can activate option "Display All-Clears in Alert Browser" - this will generate green alerts. Then you can program your own autoreaction method that will perform the "switch operation" (simple insert/update/delete into some Z-table you will create - based on status of alert - red/yellow/green.) Then you can have batch job running another Z-program that is reading this value and constantly reminding use via email.
    If you program this in a good way (abstract autoreaction method) - you can reuse this solution for other monitors as well and easily buid you own email notification functionality.
    I hope it helps.
    Best regards.

  • JMS Failover with Distributed Destinations in 7.0

              How does JMS failover with distributed destinations in WL 7.0?
              In an environment using file stores for persistent messages, can a working server
              automatically pick up unprocessed and persisted messages from a failed server?
              If so, what's the best way to set this up?
              Or, is this completely manual? In other words, we have to bring up a new server
              pointing to the location of the file store from the failed server?
              

              It appears that two JMSServers cannot share the same file store and, I'm assuming,
              two file stores cannot be using the same directory for persistence.
              So the HA you're talking about is something like Veritas automatically restarting
              a server (or starting a new one) to process the messages in the persistent queue
              that were unprocessed at the time of failure with the file store residing on some
              sort of HA disk array.
              The key point is that a message once it arrives at a server must be processed
              by that server or, in the case of failure of that server, must be processed by
              a server similarly configured to the one that failed so that it picks up the unprocessed
              messages. The message can't be processed by another server in the cluster.
              Or, is there some trick that could be employed to copy from the file store of
              the failed server and repost the messages to the still operating servers?
              "Zach" <[email protected]> wrote:
              >Unless you have some sort of HA framework/hardware, this is a manual
              >operation. You either point to the existing persistent storage (shared
              >storage or JDBC connection pool), or you move the physical data.
              >
              >_sjz.
              >
              >"Jim Cross" <[email protected]> wrote in message
              >news:[email protected]...
              >>
              >>
              >> How does JMS failover with distributed destinations in WL 7.0?
              >>
              >> In an environment using file stores for persistent messages, can a
              >working
              >server
              >> automatically pick up unprocessed and persisted messages from a failed
              >server?
              >> If so, what's the best way to set this up?
              >>
              >> Or, is this completely manual? In other words, we have to bring up
              >a new
              >server
              >> pointing to the location of the file store from the failed server?
              >
              >
              

  • Configuring CCMS_OnAlert_Email with CCMS

    Hi,
    I have setup CCMS_OnAlert_Email with CCMS  for transport alerts, I have also setup distribution list in client 000 but I got express message  as "Cannot process message, no route from DDIC to DEV:<client>:<userid>", please let me know how to route DDIC to other client users.
    Thanks in advance
    KVR

    I have configured in individual system, what CCMS background jobs run for transport alerts? I have configured CCMS alerts through DDIC in 000. I am assuming jobs will run with that user.
    I don't have any other users so I have configured a distribution list for forwarding the alerts. But when I am trying to send a mail from SAP business workplace using distribution list I was getting above error.
    Thank you

  • Create SAPUI5 application consuming Gateway service with the help of SAP NW Gateway Plug-in for Eclipse

    Hi,
    I followed the amazing SAPUI5 blog :
    How to create SAPUI5 application consuming Gateway service with the help of SAP NW Gateway Plug-in for Eclipse
    I was able to resolve all errors mentioned in this blog but then i get another error :
    Uncaught TypeError: Cannot read property 'dataServices' of undefined
    Any idea what is the problem.
    Thanks a lot!
    Amina

    Hi,
    I followed the amazing SAPUI5 blog :
    How to create SAPUI5 application consuming Gateway service with the help of SAP NW Gateway Plug-in for Eclipse
    I was able to resolve all errors mentioned in this blog but then i get another error :
    Uncaught TypeError: Cannot read property 'dataServices' of undefined
    Any idea what is the problem.
    Thanks a lot!
    Amina

  • Personal Address Book of PC Integration with CCM 5.1

    Hi,
    How can I integrate my Personal Address Book of MY PC with CCM 5.1 ?

    In Cisco CallManager 5.0, the Personal Address Book and FastDials were integrated into Cisco CallManager, instead of the requirement of an IP Phone service as previous versions. From any phone registered to the 5.0 system, go into the directories, then choose Personal Address Book. After you login, then you can choose either the address book or the fast dials. This is also configurable from the Cisco CallManager User page of the Cisco CallManager

  • Installing Locale Installer with CCM 5.1.2

    Hello, I need add the locale installer Spanish's in a cluster CCM with version 5.1.2.
    In the download's page only avaible the version "cm-locale-es_ES-5.1.1.1-1.cop.sgn", I'm trying upgrade with version 5.1.1, it's fails.
    For version CCM 5.1.2, can be updated with version 5.1.1 of locale to installer?
    If a new version of locale is necessary to installer, somebody it has some forecast of date?
    Thanks!!!

    It should work. I've installed Polish locales cm-locale-pl_PL-5.1.1.1-1.cop.sgn with CCM 5.1.2 and 5.1.3. Both versions work without any problem.

  • How to diagnose problem with CCMS?

    RWB -> Component Monitoring -> Integration
    I have a red flag on  CCMS Status Last Retry Jan 24, 2006 5:15:03 PM
    How to diagnose what is wrong with CCMS?

    Which o/s are you using??
    We had this problem on windows 2003, and the SAPCCMSR.00 service was not running. I started the service manually and this corrected the error.

  • Iam unable to purchase in AppStore reason being payment gateway,checked with my bank no issues.

    Iam unable to purchase in AppStore reason being payment gateway,checked with my bank no issues.

    Hey Bing:
    Clearly the message hasn't trickled down to Adobe support. After purchasing Captivate, and trying to register now I'm locked out of my accoun entirely-- including all my files on Creative Cloud!! I just spent a the better part of two hours dealing with this exact same issue as the orginial poster (creative cloud login issues... likely due to an old email address floating around). Here's my favorite gem:
    Khalid: I have checked the information and see that I am unable to reset your password and login to subscription service in this case I will go ahead and escalate this issue to our concern team who will reset and get back to you within 24 to 48 hours
    Jeff: great. can i get a case number so i can follow up with billing / otherwise track this issue
    Khalid: Once you close this chat you can login to your Adobe account after some time like 20 minutes later to view the case number
    Jeff: how am i supposed to login exactly?
    Khalid: If you are able to login to your Adobe account then you can login to Creative Cloud
    Jeff: Khalid, that's what we've been trying to do
    Jeff: if i could login we wouldn't have anything to escalate
    Khalid: Yes, that is correct since you are unable to login I will escalate this issue to next level they will check and get back to you at the earliest
    Jeff: got that. now how do i get this case number?

  • Is SRM Mandatory with CCM?

    Hi,
    Is it mandatory that SRM needs to be used with CCM? If I look at the architecture I can do a stand alone install of SAP CCM on a WAS. So, If want to have the functionality of CCM alone, can I implement CCM alone?
    Does SAP sell CCM individually?
    Please let me know your thoughts?
    Regards,
    Ravi

    You can use CCM with ECC only without other SRM components.
    Functionality of CCM 2.0 is mostly oriented to SRM, but CCM 3.0 will support also CRM processes.
    As CCM consists of two components Catalog Authoring Tool (CAT) and Catalog Search Engine (CSE)
    There are three mayor possibilities for deployment of CCM within SRM solution.
    1. On same WAS as SRM Server (EBP)
    2. Two WAS installations one SRM Server one CCM (CAT + CSE)
    3. Three WAS installations - one SRM Server, one CAT, one CSE
    As you can see from second and third deployment option CCM can be installed individually.
    HTH
    Gordan

Maybe you are looking for