Gateway FPD2185W issue

I have a Macbook pro, and I'm looking for a solution on how to use my secondary monitor digitally instead of VGA. I'm using it no on VGA now, but like everyone knows, digital looks nicer. I have the ability as all MBPs do, so I'm wondering why i can't make this happen. The problem is that the Mac will not detect it. Ill connect it directly to the computer, and yet it still wont. I know the monitor works perfectly in both VGA and Digital as i used it on my previous computer - an HP.
If any of you smart computer people could give any solutions, it would be super Great..
thanks
grant

Try the suggestions in this thread reply:
http://discussions.apple.com/thread.jspa?messageID=3930814?
Macbook Pro Mac OS X (10.4.9) 2.33 GHZ 2GB RAM
Perhaps your mac is trying to use the saved display settings from when the monitor was connected via VGA.
Best of luck! That's all I got for ya.

Similar Messages

  • Trouble matching resolution of Gateway FPD2185W monitor to G4

    I just bought the Gateway FPD2185W, and it is really sweet. However, with my setup (PowerMac Dual G4 533 MHz with an NVIDIA GeForce2 MX graphics card) I cannot match the optimal (native) display resolution (1680 x 1050). The display preferences do not have that selection. The best looking display I can get is 1600 x 1200 at 60Hz, which looks good, but makes some text fuzzy. I've read in MacIntouch that some people have been able to match the resolution - with G5 iMacs at least (which I think use NVIDIA GeForce FX 5200 cards). So the question is, can I just buy a 5200 card and replace my current card? Will it be compatible with the G4 AGP? (the 5200 does support 8x AGP).
    Another issue related to this display/card combo seems to be that iPhoto slideshows have pictures off center (taking up the right 2/3 of the display and leaving the left blank). The entire picture is also not visible. I'm sure it is switching resolutions when doing the slideshow since when I stop the show, some of my apps are in different positions on the display.
    Thanks in advance for any insights!
    Rami
    Power Mac dual G4 533 MHz   Mac OS X (10.4.8)   NVIDIA GeForce2 MX

    See if you can set the required resolution with switchRes X
    <http://www.madrau.com>
    or DisplayConfigX
    <http://www.3dexpress.de>
    G5 graphics cards will not work in a G4. Some can be modified to work, but it is safer to get a card that was made for the G4. Which card would depend on what displays you plan to use and what performance you want (and on how much you want to spend).

  • What is the best method to connect Gateway FPD2185W External Monitor

    Hello,
    I just bought a new Macbook. I would like to connect it to my larger Gateway FPD2185W external monitor. The monitor is maybe three years old, and has VGA, component, S-Video, and DVI inputs. Which type of connection would work best? I have a mini-DVI to VGA connector from Apple, but the display doesn't look the greatest. I'm still new to using the MacBook, so help would be appreciated.
    Thanks!

    There are some settings on the monitor that might be affecting how it looks when running from VGA. There should be a "tuning" function, also known as clock phase adjustment. There is an AUTO button located on the side of the monitor. Press it and see if it helps the picture quality. Also under the Video Adjust menu are settings for Sharpness and Noise Reduction. Those settings can often interfere with good picture quality, so you might try playing with them as well.
    Of course, you could always switch to the DVI input for the best image quality, but that would require buying another adapter from Apple and also a DVI cable if the monitor didn't already come with one.

  • Gateway Server Issue

    Hello,
    Following is the issue that I'm having.
    I've 2 management servers and ADCS configured on Active Directory. I've a couple of servers in the workgroup that I need to monitor. I didn't configured gateway servers because there are only 2 workgroup servers. I've successfully imported the certificates
    using MOMImport.exe. on SCOM management servers and also on the WORKGROUP servers. However I don't see the workgroup servers in the pending servers. 
    I checked the event ID on the workgroup servers and I got the following Event IDs. 
    EVent ID 21006: The opsMgr connector could not connect to SCOM:5723. The error code is 11001L(no such host is know)
    Event ID : 21023 OpsMgr has no configuration for management group SCOM and is requesting new configuration from the Configuration service.
    The firewall is disabled on the all servers. I'm not sure what is going on. 
    I've followed a lot of blogs and technets answer, but i'm still having issues. 
    Any help will be apprecaited.
    Thanks

    I've figured it out the problem. Ive resolved it by going through the following steps.
    1st issue was DNS entry. After entering the DNS of the work group machine I got the EVENT ID 21007 on the workgroup computer. 
    That lead me to check my certificate names which were not correct so I changed it to the FQDN of my SCOM server and on the workgroup computer I changed it to the computer name. Re-imported the certs and boom.
    NOTE make sure certificates name and friendly name are same as of the FQDN otherwise it will not work. 
    Kevingreen blog really explained it well. Below is the link
    http://kevingreeneitblog.blogspot.com/2011/09/using-internal-certificates-with-scom.html

  • SA520w ProtectLink Gateway activation issue

    Hi Forumers'
    Below are my problem statement:
    1. i had been register the ProtectLink Gateway at TrendMicro website. Now i receiveing the activation code with me.
    My problem is i never receive the additional activation email for me to proceed on configure the IMHS web portal.
    2. during the registration, i didn't provide my domain name and IP address of my WAN port. But still, i never receive the post-registration email for this. Now i need to get the MX record then forward to local ISP to configure over their DNS.
    3. anybody who the escalation channel? i raise case in trend micro but seem no reaction from them (i register since 8th march 2011, it's over 80hrs ++)
    thanks
    Noel

    exactly same as my case but even i did hardware reset with correct time zone & everything, problem still can't be solved. Re-generate the license from TrendMicro and get problem solved at the end. I can understand the point for factory default but when the box deployed in client site that'll be difficult for reseller to perform factory default. We trust & rely on Cisco but outcome is un-expected. I strongly suggested support to generate license for me in day but they insist in factory default even I'm very sure all setting are correct in box already.
    I found lots of post regarding SA500 series issues and I can't believe Cisco SMB products are even worst than China & Taiwan products nowadays.
    cheers,
    Chi Hong.

  • Adv RACF 9.0.4.15 LDAP Gateway setup issue on LINUX

    Hi,
    I am trying to setup LDAP Gateway on LINUX, while starting the script (run.sh), it is throwing lot of errors. Can anybody please share their working LDAP Gateway run.sh? I will try to compare and resolve the issue.
    Thanks,

    I have had to resiolve similar errors using the LDAP gateway for the AS400. The two products are based on the same gateway from Identity Forge.
    When you are trying to debug the startup, be sure to watch the console the console for class not found errors. When debugging, I typically run the gateway as a forground task instead of using nohup. In my case, there were some missing jar files that were reventing the gateway from running. I used google to locate the jars and got the gateway to run.
    Here is a copy of the run.sh I made using the provided run.sh code as a base.
    #!/bin/sh
    # IDF Server start script.
    # resolve link - $0 may be a softlink
    THIS_PROG="$0"
    #echo "This Prog = " $THIS_PROG
    while [ -h "$THIS_PROG" ]; do
    ls=`ls -ld "$THIS_PROG"`
    link=`expr "$ls" : '.*-> \(.*\)$'`
    if expr "$link" : '.*/.*' > /dev/null; then
    THIS_PROG="$link"
    else
    THIS_PROG=`dirname "$THIS_PROG"`/"$link"
    fi
    done
    PRGNAME=`basename ${THIS_PROG}`
    # Get standard environment variables
    PRGDIR=`dirname "$THIS_PROG"`
    if [ "$PRGDIR" = "." ] ; then
    PRGDIR=`pwd`
    THIS_PROG=${PRGDIR}/${PRGNAME}
    fi
    #APP_HOME is set here
    # we are assuming that this script
    # lives in a subdirectory like bin
    APP_HOME=`cd "$PRGDIR/.." ; pwd`
    TMPDIR="$APP_HOME"/temp
    ##### SET ENVIRONMENT VARIABLES #######
    APP_HOME=/opt/app/ldapgateway
    TMPDIR=/opt/app/ldapgateway/temp
    OIM_HOME=/opt/app/Middleware/Oracle_IDM1/server
    OIM_CLIENT_HOME=/opt/app/Middleware/Oracle_IDM1/designconsole
    ##### SET WEBLOGIC HOME ##################
    APPSERVER_HOME=/opt/app/Middleware
    ## ************ EXAMPLE 11G PATH **********************************
    # APPSERVER_HOME=/opt/Oracle/Middleware/wlserver_10.3
    # OIM_HOME=/opt/Oracle/Middleware/Oracle_IDM1/server
    # OIM_CLIENT_HOME=/opt/Oracle/Middleware/Oracle_IDM1/designconsole
    # Get standard environment variables
    # Like JAVA_HOME, etc.
    if [ -r "$PRGDIR"/setenv_idf.sh ]; then
    . "$PRGDIR"/setenv_idf.sh
    else
    #JAVA_HOME=$APPSERVER_HOME/jdk/jre
    SECURE="false"
    SM=""
    DEBUG="false"
    DB=""
    JVM_OPTS=""
    fi
    echo '********************************'
    echo 'Displaying vars from setenv'
    echo '********************************'
    echo "JAVA_HOME = " $JAVA_HOME
    echo "SECURE = " $SECURE
    echo "SM = " $SM
    echo "JAVA_OPTS = " $JVM_OPTS
    echo "DB = " $DB
    echo "DEBUG = " $DEBUG
    echo "APP_HOME = " $APP_HOME
    #echo '********************************'
    # resolve link - $JAVA_HOME may be a softlink
    #$echo "JAVA HOME = " $JAVA_HOME
    #while [ -h "$JAVA_HOME" ]; do
    # ls=`ls -ld "$JAVA_HOME"`
    # link=`expr "$ls" : '.*-> \(.*\)$'`
    # if expr "$link" : '.*/.*' > /dev/null; then
    # JAVA_HOME="$link"
    # else
    # JAVA_HOME=`dirname "$JAVA_HOME"`/"$link"
    # fi
    #done
    #echo "JAVA HOME = " $JAVA_HOME
    #Set Java Command after we resolved soft link
    JAVACMD="$JAVA_HOME"/bin/java
    if [ ! -r "$JAVACMD" ]; then
    echo "JAVE Executable not found, exiting"
    echo "JAVACMD = " $JAVACMD
    exit 1
    fi
    ## CHANGES THE BELOW CP_FILES FOR USER WITH 11G
    ## UMCOMMENT SPECFIC CONNECTOR AGENT /etc/...-adv-agent-recon.jar
    CP_FILES="${APP_HOME}/dist/idfserver.jar
    ${APP_HOME}/etc/as400-adv-agent-recon.jar
    ${APP_HOME}/lib/concurrent-1.3.4.jar
    ${APP_HOME}/lib/shared-ldap-0.9.5.3.jar
    ${APP_HOME}/lib/shared-ldap-0.9.5.3.jar
    ${APP_HOME}/lib/ldapfilt.jar
    ${APP_HOME}/lib/ldapjdk.jar
    ${APP_HOME}/lib/ldaplstd.jar
    ${APP_HOME}/lib/ldapsp.jar
    ${APP_HOME}/lib/antlr-2.7.5H3.jar
    ${APP_HOME}/lib/shared-asn1-codec-0.9.5.4.jar
    ${APP_HOME}/lib/shared-asn1-0.9.5.3.jar
    ${APP_HOME}/lib/commons-beanutils.jar
    ${APP_HOME}/lib/slf4j-jdk14.jar
    ${APP_HOME}/lib/jakarta-regexp-1.4.jar
    ${APP_HOME}/lib/license.jar
    ${APP_HOME}/lib/jdbm-1.0.jar
    ${APP_HOME}/lib/jt400-full-5.0.jar
    ${OIM_HOME}/lib/xlLogger.jar
    ${OIM_HOME}/lib/xlCrypto.jar
    ${OIM_CLIENT_HOME}/ext/commons-logging.jar
    ${OIM_CLIENT_HOME}/ext/javagroups-all.jar
    ${OIM_CLIENT_HOME}/ext/oscache.jar
    ${OIM_CLIENT_HOME}/ext/log4j-1.2.8.jar
    ${OIM_CLIENT_HOME}/ext/spring.jar
    ${OIM_CLIENT_HOME}/lib/oimclient.jar
    ${OIM_CLIENT_HOME}/lib/xlAdapterUtilities.jar
    ${OIM_CLIENT_HOME}/lib/xlAPI.jar
    ${OIM_CLIENT_HOME}/lib/xlAuditor.jar
    ${OIM_CLIENT_HOME}/lib/xlCache.jar
    ${OIM_CLIENT_HOME}/lib/xlDataObjectBeans.jar
    ${OIM_CLIENT_HOME}/lib/xlDataObjects.jar
    ${OIM_CLIENT_HOME}/lib/xlUtils.jar
    ${OIM_CLIENT_HOME}/lib/xlVO.jar
    ${APPSERVER_HOME}/wlserver_10.3/server/lib/weblogic.jar "
    #start
    CLASSPATH=""
    # Setting the classpath
    for cp in $CP_FILES
    do
    # echo $cp
    if [ "$cp" = "${APP_HOME}/dist/idfserver.jar" ] ; then
    CLASSPATH=$cp
    else
    CLASSPATH=${CLASSPATH}:$cp
    fi
    if [ ! -e "$cp" ] # Check if file exists.
    then
    echo "$cp does not exist."; echo
    continue # On to next.
    fi
    done
    # Checking to see if IDF will run with security Manager enabled
    if [ "$SECURE" = "false" ] ; then
    SM=""
    fi
    # Checking to see if IDF will run with debugging enabled
    if [ "$DEBUG" = "false" ] ; then
    DB=""
    fi
    #echo '*******************************'
    echo "TMPDIR: " $TMPDIR
    echo "JAVA_HOME: " $JAVA_HOME
    #echo '*******************************'
    #echo '*******************************'
    echo "JAVACMD = " $JAVACMD
    echo "DB = " $DB
    echo "JVM_OPTS = " $JVM_OPTS
    echo "SM = " $SM
    echo '*******************************'
    echo "CLASSPATH = " $CLASSPATH
    echo '*******************************'
    ## START COMMAND FOR WEBLOGIC [OIM 9.x & OIM 11G]
    nohup $JAVACMD $DB $JVM_OPTS $SM -classpath $CLASSPATH -DXL.HomeDir=${OIM_HOME} -Djava.security.auth.login.config=${OIM_HOME}/config/authwl.conf com.identityforge.idfserver.Main $1 $2 $3 $4 $5 $6 $7 $8 $9 2>&1 &
    xpid=$!
    #Save running process id (PID)
    echo $xpid > ${APP_HOME}/logs/idf_server_pid
    #end
    Kerry Classen
    [email protected]

  • SCOM Gateway Server Issue

    Hi All
    I am having an issue related with my LAB Gateway server with SCOM 2012 SP1
    I am having 2 Management server and 3 gateway server in my LAB. Now I am trying to install a new Gateway server. But its not showing in Management server list. Its showing as a SCOM Client. have any one faced this issue or any idea.
    Your earlier response is appreciated.

    Hi,
    Whether the gateway server is listed under pending management, if it is, try to remove it from here before running the approval.
    Please also go through the below similar thread for more details:
    SCOM 2012 R2 Gateway installation error and no System Center Management server after install
    http://social.technet.microsoft.com/Forums/en-US/ce6d0a73-c31d-4c26-85d4-d3cce35d48c3/scom-2012-r2-gateway-installation-error-and-no-system-center-management-server-after-install?forum=operationsmanagerdeployment
    Please follow the below steps:
    1) Validate that the gateway server can ping the Management Server that it will need to communicate with and can telnet to port 5723. Also validate that the OpsMgr Management Server can ping the Gateway server. If traffic doesn’t route between these systems,
    or they cannot resolve each others names, or they cannot communicate on port 5723 the Gateway will not function.
    2) Install the gateway server from the OpsMgr media (Gateway management server).
    When installing, choose the Management Server that we have determined will be the primary Management Server for gateway servers in the environment and configure the gateway to run as local system.
    3) Next if required in the OpsMgr console we delete the agent from pending management if it appears in that view.
    4) Perform the approval of the gateway by transferring the Microsoft.EnterpriseManagement.GatewayApprovalTool.exe from the installation media to the appropriate path to run it from (c:\program files\System Center Operations Manager 2012\Server is the default
    location)
    Regards,
    Yan Li
    Regards, Yan Li

  • XML Gateway  Mapping Issue

    Hi All,
    My map has following structure
    -<envelope> -- root element and also level
    -<gdsnItemRegistryResponse> --Level
    -<docException> --Level
    -<docAcknowledgement> --Level
    <docException> and <docAcknowledgement> are siblings
    I dont have any dtd's associated with map
    In payload <docException> and <docAcknowledgement> can be occur in any order
    When I push the payload with following order same as defined in XMG map
    -<docException>
    -<docAcknowledgement>
    its working fine
    but when I push the payload with different order
    -<docAcknowledgement>
    -<docException>
    PL/SQL procedure calling on INPROCESS action on <docAcknowledgement> is
    working fine,
    but
    PL/SQL procedure calling on INPROCESS action on <docException> is being
    performed, but XML Gateway is not passing values to the parameters of that
    procedure.
    When I verified the parameter values in log, all are null
    I am calling same procedure on both tags
    How to overcome above problem ?
    How to enforce that two tags can be in any order without dtd?
    Thanks
    -Praveen

    Just I am confirming my map structure
    -<envelope> -- root element and also level
    ----<gdsnItemRegistryResponse> --Level
    -------<docException> --Level
    -------<docAcknowledgement> --Level                                                                                                                                                                                                                                                                                                                                                                                                   

  • NAC Appliance + OOB Virtual Gateway Trunking issues

    I have the following problem. When I connect the CAS eth0 to a trunk port in the core switch it disconnects from the CAM. When the port is in access mode, the CAM can connect to the CAS. The core switch is a 4500 with IOS 12.2(25)EW. What could be the problem?

    Hi prananth,
    I managed to resolve the issue. It was a HA issue. I had configured "Link failure detect" on the redundant CAS app. Apparently the CAS couldnt reach the pingable IP causing failover to take place many times between the two boxes causing the CAS not to communicate with the CAM.
    Kindly help me with the following problem I am now having:
    http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Security&topic=General&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddf45d4/0#selected_message
    I will really appreciate. Thank you.

  • Gateway time issue

    I have a window that is opened from an IFramed gadget. The page in the window is gatewayed, but not a Plumtree gadget (ie used webform in VS.NET instead of gadgetform). I have a stored proc that takes anywhere from 1-3 minutes to run. Propagating security permission in a doc management solution. How can I make the page "wait"

    I have a window that is opened from an IFramed gadget. The page in the window is gatewayed, but not a Plumtree gadget (ie used webform in VS.NET instead of gadgetform). I have a stored proc that takes anywhere from 1-3 minutes to run. Propagating security permission in a doc management solution. How can I make the page "wait"

  • RV042 Protectlink Gateway Major Issues

    So to start I have the latest firmware on the device. 1.3.12.19.  When we have the URL Filtering and or the web reputation enabled it brings the internet down to a crawl.  We have scanned all system for viruses/malware and all 6 pc's are clean.  We are peer to peer and no servers. I've done speedtest with the service disabled and the speedtest are normal but when I enabled either url filtering or web reputation or both it kills the internet.
    The logs are saying the url cache is full.
    Warning! ProtectLink URL queue is almost full (80%) now. URL blocking might occur3
    ProtectLink URL queue is empty now.
    We will see those over and over again.  When we trialed this service it did not behave this way but as soon as we activated a full licenses it's started.  I've created a ticket and both Trend and Cisco have little experience with their own product is what I'm gathering or the two techs I've worked with are not up to speed which may be the case.
    We could really use some help on this since we are running a business have paid for this service.
    Thanks in advance for helping with our issue.

    Hi Christi,
    Can you please gather me a copy of your logs and your RV's config?
    Thanks!
    Dave

  • Voice gateway Config issue

    Hello everyone;
    I do have an analog line that i want to affect to (04) four IP Phones, so that any one of these four ip phones users can use this same analog line, and when we call that analog line number, any one of these four ip phone users can answer.
    Is this possible to do on the Voice gateway?
    I think about configuring many connection plar under one voice port, like this: 
        voice port 1/0/0
        connection plar opx 1000
        connection plar opx 1001
        connection plar opx 1002
        connection plar opx 1003
    And about, puting many answer adress under dial-peer voice this way:
         Dial-peer voice
         answer adress 1000
         answer adress 1001
         answer adress 1002
         answer adress 1003
    but i don't know if it will work , and don't see how it could be done for the voice translation rule and the voice translation profile.
    Ragards.
    Camélia

    This will be done in only specific Dial-peer and Voice port.
    A voice Translation rule is not need because once the voice-port number is dialed for example 011-27272, the plar command forward it 2001 and the dial-peer 10 is matched, you only need to configure a hunt-pilot in CUCM.
    Voice-Port 1/0/0
    connection plar opx 2001
    2.) You will need to match incoming calls from PSTN, you can do this by use the below commands to match all incoming calls from PSTN.
    Dial-peer voice 1 Pots
    Incoming called-number .
    3.) Finally you will need to send calls to 2001 via CUCM to match the Hunt-Pilot.
    Dial-peer voice 10 voip
    destination-pattern 2001
    session-target ipv4:<<CUCM-IP-Address>>
    Please Rate.

  • EVM module FXS - FXO GSM Gateway interoperability issue

    Hello,
    I have a router Cisco 2821 with EVM module 8 FXS + 4 BRI and GSM Gatewat Ecotel Vierling GSM3-1F which has a FXO and FXS ports.
    I'm controlling the router interfaces by mgcp and tried to connect the GSM Gateway. The problem is that the GSM Gateway expects the digits after it goes off-hook but the CCM sends them before that.
    I want to develop a method to send the digits inband.
    Now it works with access code 8 and then users dial the phone when they head the second dial tone but it is not very convenient.
    Further thank for any ideas.
    Best Regards,
    Zdravkov

    Look at this link for more information on GSM Gateway:
    http://www.cisco.com/en/US/prod/collateral/iosswrel/ps8802/ps6968/ps6441/product_bulletin_c25-409474.html

  • API Gateway/Domain issue

    We have an API gateway that has ran wonderfully for many years and we send email from the mainframe through it. In the past couple of years, occasionally we have an account that will not process, we get an error 'unknown destination in address string'. If I put the fully qualified domain and post office in the address, it will process fine.
    This only happens on a couple of addresses, the other addresses in that domain/po process fine. What is missing that the domain cannot process that record without the domain/post office information?

    On 6/17/2010 2:36 PM, catruss wrote:
    >
    > We have an API gateway that has ran wonderfully for many years and we
    > send email from the mainframe through it. In the past couple of years,
    > occasionally we have an account that will not process, we get an error
    > 'unknown destination in address string'. If I put the fully qualified
    > domain and post office in the address, it will process fine.
    >
    > This only happens on a couple of addresses, the other addresses in that
    > domain/po process fine. What is missing that the domain cannot process
    > that record without the domain/post office information?
    >
    >
    Dunno, but since gateway was written for GW 4.1, (1994) and doesn't
    udnerstand internet addressing, I am not surprised.

  • Primavera Gateway Installation issues

    Hi everyone,
    I am trying to install Primavera Gatway on my system.
    But requires Weblogic with patch 7BWI.
    I am unable to find 7BWI.jar and patch-catalog.xml anywhere.
    Can anyone help me?
    Thanks in advance.
    System Info :
    Microsoft 32 bit
    Oracle
    Regards,
    Santosh

    Hello Santosh,
    I'm trying to do the same, I just found this patch number 9923849, which looks to be the 7BWI Patch
    https://support.oracle.com/epmos/faces/PatchResultsNDetails?_adf.ctrl-state=d6g7a11q2_4&releaseId=8191036000&requestId=14192858&patchId=9923849&languageId=0&platformId=2000&_afrLoop=1075004471937562
    Good luck with the install :)

Maybe you are looking for