Gateway FX and Blue Screen of Death

Computer:
Gateway FX 7024
GeForce 8800GT 512 mb
Problem:
I've had the computer for 1 1/2 years with very few problems. Recently, the screen will lock up solid and be illegible with "static" lines all the way down the monitor. Sometimes before the screen locks up, it will flip to the blue screen of death, say it's dumping physical memory, and then lock up. Only thing I can do is restart, but it will do it again at random lengths of time. Happens more while I'm playing games than anything else. Sounds to me like the graphics card has gone Tango Uniform, but a computer guru, I am not. Any ideas?
What I've done so far:
I have checked for updated drivers and installed them.... no fix. I rolled back the drivers.... no fix. I have visually checked fans on power supply and graphics card to make sure they are working and they are fine. The fan on the motherboard spins, but doesn't appear to be moving overly fast. I checked BIOS and everything looks around what it should be for temp settings. In the "problems and solutions" application, it shows a video hardware error.
The only thing i did notice was there is only a 400W power supply installed and from the posts I've read, the 8800GT graphics card should have a 700-900W power supply. However... I've never had problems with it before. Could this cause the problem after 1 1/2 years?
help... i'm shaking from game withdrawals

Visited a company IT department today and an engineer looked at the AT&T Net Client settings. It now works - this may have been the "fix" for those in a similar predicament (all in the AT&T Net Client):
1. Click "Settings".
2. Click "Show the login properties window".
3. Click "Configure".
4. Click "Next".
5. Select the "Both the internet and my company's intranet" radio button.
6. Select "Managed VPN - SSL DualAccess" from the dropdown.
7. Click "Finish".
Cheers,
- Pete

Similar Messages

ITunes 9.2 causes fatal error and "blue screen of death"

I installed Itunes 9.2 this morning and whenever I tried accessing this version of Itunes, my system hangs and showed me the infamous “blue screen of death”. I have tried uninstalling and reinstalling Itunes but nothing seems to work.
Anyone encountering this problem and is there any way to solve this? Thanks!

I was using v9.1.1.12 and could not synch my iphone with outlook although with other versions there was no problem so was keen to install the new version of iTunes yesterday (9.2.0.61). Installation went fine, iTunes opened up perfectly and read my music library and hey presto synched my phone with outlook. I was well pleased. Closed down itunes and went back to working A couple of hours later as my secretary had updated my calendar I plugged in my iphone and itunes started to open then.... disaster. The blue screen appeared.
I restarted again, and again and again and the same thing happens everytime iTunes was opened (independently or when plugging my iphone in). Tried 4 times.
I did a repair using itunes installer. No change stilled blue screened when opened. I then had the bright idea of uninstalling iTunes totally and reinstalling. No change - itunes begins to open then causes blue screen.
The next step I uninstalled itunes. Did a disk defrag and then thought I would reinstall version 9.1.1.12 and install the newer version over the top. But hey you have guessed it, the older version would not open because the library it was using had been created with a newer version i.e. v9.2.0.61 - nice one iTunes!!
So at the moment I have no iTunes at all so am stuffed. So, iTunes solves one problem but creates another. Do they ever check these things???
Help!!

Two PCIe-6537 read error and blue screen of death

Hi all
I am reading two PCIe-6537 at 20MHz sample rate acquiring all 32 lines each with externally supplied clock and external trigger.
When operating separately, no problem, but when two are read I get
a) on average of 25% of time error reading the data (time out error but happening before the actually time set by timeout, i.e. immediately after trigger) and
b) a blue screen of death after 1h or so of constant operation.
I have a feeling a) and b) are related and LV causes the system crash with so many errors. NI support seems to think otherwise.
I am using Dell Studio XPS 8100 and I have done all the firmware updates for the Chipsets etc. It has
not changed anything.
Changing single line to whole port reading does not change anything.
Any ideas what to try else?

Hello Pawel,
I have looked over the service request you mentioned about acquiring 2 PCIe-6537 at 20MHz sampling rate on all 32 lines. In order to narrow down this issue, I think it would be best to try only acquire from both cards without doing any triggerring etc. Also when performing this test, I would only want to acquire from 8 channels on both cards to see if this reproduces it. If this works, we can slowly add more elements to narrow down what the issue is and make us more effective to solve the problem.
I also wanted to ask if you have tried this setup on another machine and if it worked.
Along with this, have you tried to create two Digital Tasks in MAX and try to acquire for the same amount of time to see if the issue reoccurs here? This would tell us if this problem is connected to the driver/computer or LabVIEW.
Jim St
National Instruments
RF Product Support Engineer

I have a new iPhone 4 and every time I plug it into my laptop I get the "blue screen of death", it didn't do this the first time because I downloaded all my music from iTunes but ever since it has done this. Anybody have any insight?

I have an iPhone 4 and downloaded all my iTunes music to it. Now when I connect it to my laptop I automatically get the "blue screen of death", does anyone have any insight into this problem?

This will happen if you have photos in your camera roll and an out-of-date scanner or webcam driver. See this: http://support.apple.com/kb/TS1502

Blue screen of death when running labwindows, pxi chassis, and windows 2000

Hi, when programming under labwindows the software crashes cvi, and windows NT and i get the blue screen of death...usually every hr or so. I checked the hw config and there are no conflicts. Is it normal to share IRQ 9 for all? is there a document that explains the I/O map addresses for the pxi to check for conflicts? I got all NI instruments, but one irig board. Currently only talking to the DMM and the switch.

me also
-win2000
-cvi 6.0
-pxi1006 8176cpu
-dmm4060
-IVI1.83 ,nidaq693,nidmm201,nidmm21
- break program after a nidmmread function
- terminate program
- rerun program
- DMM Blue Screen of Death..everytime
- Make Software User Friendly -
Attachments:
BADDMM.ZIP ‏3 KB

Who knows how to fix iphone 5s blue screen of death and itunes error 4013?!

Hi
Last day, dec 14th, a blue screen of death appears on my iphone 5s, aparently because I was installing facebook app.
After that, the iphone remains restarting over and over non stop, until the battery shutoff.
I try to press home and power/sleep buttons for 10 secs, but stil continuous with the blue screen.
After that, with battery charged, I tried to hold the home button and simultaneously connect to an usb cable (the cable is in perfect conditions) to start itunes.
Its worked, but now, everytime shows an itunes message: error 4013, "the iphone cannot be restored".
What can I do now?!
Thanks

Hi Tks777,
Thanks for visiting Apple Support Communities.
If you see an "error 4013" when you try to restore your iPhone, try these troubleshooting steps:
Error 4000, 4005, 4013, 4014, and 4016
After you perform each step, try to restore your device.
Restart your computer.
Disconnect all your USB devices from your computer and connect to another USB port.
Use a different USB cable.
Uninstall third-party security software.
Try restoring using an alternate computer.
You can find the article with these steps here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Regards,
Jeremy

HP PSC 2355 Blue screen of Death and Error message/ blinking lights.

Hello, I have a HP PSC2355 that we recently moved, after we moved it started randomly locking up with the Blue Screen Of Death (BSOD), it would give an error:0X880529ec on the BSOD, further down the screen were the characters 1:H+x?+ The (ON) light was Blinking Green, the (!) light was blinking orange. This will happen regardless if the PC was on or not, it will happen when trying to print, sometimes only getting 1" of print at the top of the page. Currently running Windows XP, SP3 connected via USB. I highly doubt it is a PC issue as it will happen when trying to use it as a standalone copier. Sounds internal to me, I do have electronics experience ( I repair televisions ) If someone has any ideas, let me know.....
I might also add, you dont have to be printing for the error to crop up, you can just plug it in and wait, later you will see the BSOD and the blinking lights.
Message Edited by lesterl on 07-04-2009 06:49 AM

Well, decided to try to print from another computer, d/l the smaller driver only package (26meg), did a fresh install after finally getting the printer to stay on for a few minutes, it took forever on the first part of 8 on the installer (cable already plugged in), and it has been on for many hours now, printed many things, yet to have an error. Dont know if the driver installation did anything with the firmware on the unit or not.
Differences:
Celeron Laptop (virus/trojan free) now
Was on a P4 desktop that had not been so lucky with the trojan/viruses.
Upstairs on my dining room table now
Was in basement in wife's scrapbooking room.
Dunno, time will tell.......

Blue screen of death, and continous reboot. Phone never actually boots up, just keeps going from reboot to blue screen and back again. Any suggestion?

Blue screen of death, and continous reboot. Phone never actually boots up, just keeps going from reboot to blue screen and back again. Any suggestion?

Hello jared1915
If you are stuck in that loop, the next step would be to restore your iPhone. Check out the article below to get your iPhone into recovery-mode and restore it in iTunes.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Regards,
-Norm G.

Blue screen of death? I just updated my MacBook Air with the latest OX (25 Jun 11). When I restart - I get the Apple logo and then a blue screen and nothing else. Help!!!

Blue screen of death? I just updated my MacBook Air with the latest OX (25 Jun 11). When I restart - I get the Apple logo and then a blue screen and nothing else. Help!!!

Insert the install disk and press c on startup. Select your langauge then, if there's a menubar click utilities then click Disk Utility. If you didn't see the menubar continue with the installer until you see it.
Once in disk utitly select the drive and repair permissions.
After the repair is done, quit the utiltiy.
You can try to reboot and see if it works if you reboot, but if it doesn't repeat the same as before again.
Now you can continue with the installer and install the os.
Quit

Blue Screen of Death with XP and E1000

I am getting the blue screen of death on my Thinkpad running XP and wireless G with E1000 router. I have narrowed it down to issues with my wireless connection, but am wondering if I setup the router incorrectly. Any suggestions?

My XP ThinkPad didn't quite get to that blue-screen point, but it was no fun. The driver update mentioned previously is important (I updated both wired and wireless drivers at the same time) as is fully updating/patching XP.
Access Connections was causing me more trouble than it was worth, so I uninstalled that.
I think those were the three crucial steps (on the computer side anyway) that finally got things working.

Blue Screen of Death and no XP CDs - Satellite M70

Hi.
I've got a Toshiba Satellite M70 that displays the Blue Screen of Death directly upon startup. It reads an error of 0x000000ED stating an unmountable error as the specific problem.
Unfortunately, I've no Windows XP CD to restore my computer. I do have the Toshiba Product Recovery CD, but that seems like it will simply format my computer, and I have important data I absolutely do not want to delete from my hard drive.
I cannot start in safe mode; Blue Screen of Death appears straightaway upon startup. If I try to get int through F8, Advanced Options appear but after selecting system restore it goes back to BSOD. I've also tried burning an ISO file for recovery, and the computer went into Windows Setup but hangs on "Setup is starting Windows".
Any idea what the trouble could be? And how can I fix this problem without deleting any info on my computer?
Thx.

The best option would be to remove the HDD and connect it to another PC using a USB 2.5" HDD Adapter. The HDD will appear as another Drive letter (E: for example) and you will be able to copy your data. Then you put the HDD back in and run Recovery.
If its simply a File System corruption problem, you could try running CHKDSK /F to fix it. You will need a retail version of the XP CD to do a CHKDSK from the Repair Console. Or you can create a Live Bootable XP CD which loads XP directly off a CD (Google BartPE) and run CHKDSK.
Otherwise the HDD may have bad sectors. You can use the Advanced test in Hitachi DFT to check the surface. But you should back up your data first, the HDD could get worse if you stress it out.

Blue Screen of Death, 0x0000007B and 0x00000050

Hi,
Product: HP Pavilion dv9500
S/N {Removed for privacy}
P/NG2745UA#ABA
Windows Vista Service Pack 2.
Today, when I was running Adobe Photoshop, my computer suddenly froze and some colors on the screen became "corrupted" (some yellow dots, lines and patches appeared throughout the screen). After the computer did not respond after 5 minutes, I then held down the power button to force a restart. When I tried to start it again, the HP logo appeared as usual, then came the black screen with the flashing in upper left corner (a little longer than usual I noted). Then came a screen where I was allowed to choose between, run startup recovery or normal mode. I chose startup recovery. A windowed showed which displayed "Windows is Loading Files" and a bar began filling up. Then the screen turned blue and I saw command prompt flash several times in upper left corner for fractions of a second. Then, without even the recovery window showing, a blue screen of death appeared with the code bearing "0x00000050" PAGE FAULT IN NON-PAGE AREA. This screen hung until I pressed the power button and the computer obeyed. I then began to use several other options that I hoped would fix it, Safe Mode, Last Known Safe Configuration, System Restore, though they all went back to the same "Windows is Loading Files" page. I noted that went I tried to launch from "Normal Mode", the BIOS screen would appear, then after the computer would display another Blue Screen of Death with the more famous code "0x0000007B" INACESSIBLE_BOOT_DEVICE. Could someone please help me? I do not have that many important documents on this computer and I am willing to reboot it though I do not have any disks. Is there another way I can reinstall WIndows Vista? If there is a way that I can recover my files, that would be better. Thanks.

Update: I went into BIOS Setup Utility and performed a Primary Hard disk Self Test. Although the test didn't finish, it stopped with this message "#10009- Replace Hard Disk". I do not really want to order another hard drive, does anyone have a solution?

Blue screen of death out of control and a pain

Hi,
I recently reinstalled Windows Vista 64 bit on my computer, and now my computer is acting really slow to the point of a blue screen of death. I even tried Windows Update and it even blue screened on me. Any help will always be appreciated.
My Computer is an HP pavilion elite m9500y
My graphics card is a nvidia geforce gt 610

Hello ComputerGuy86. I would like you to follow this troubleshooting document to address this issue:
http://support.microsoft.com/kb/958233
If the steps here do not resolve the issue, please provide pictures of the error, and specifics as to when it occurs. I'm only here to help!
Mario
I worked on behalf of HP.

Notebook with blue screen of death and HP Ceement errors

Hello, I am using:
Product name: HP Pavilion g7 Notebook PC
Product number: QE310UA#ABA
Windows 7 Home Premium 64-bit Service Pack 1
I have been having a few message/errors lately and suspect they are related
1) The "blue screen of death" has shut down operations a few times now, that I have seen. When it reboots, all my passwords are gone, all new log ins are required. I know it's been happening more than I see because my passwords will dissapear while I am away from my laptop and I had not seen it.
2) Error message "HP CEEment has stopped working, windows is looking for a solution to solve this problem", comes up a lot. Daily, usually twice at a time. I googled this and a few "answers" said to look at your firewall and to "allow" HP Ceement. I called Norton and they showed me that it is allowed, so they are not the issue and to contact HP, hence why I am here.
3) Not sure if this last one is part of the issue, but it has come up more than once lately. Error "Your current settings do not allow file to be downloaded". I ssupect when the computer reboots after the blue screen the security is automatically heightened and that is why I got this, as well as loose passwords and a couple other "secruity level" type problems.
Thanks for the help, Amy

coatiamy
Welcome to the HP Community Forum.
I can offer the following in hopes that it may help.
First, a bit about the CEEment program:
CEEment Overview
Excerpted:
CEEment stands for Customer Experience Enhancement. CEEment (HPCEE.exe) is the reporting tool that HP uses to collect and study anonymous data. You can activate CEEment when you set up your computer. Or, you can activate using HP Advisor or HP Support Assistant at any time.
Commentary
It might be that the CEEment program is not the direct cause of the problem, that is, the issue might be symptomatic of the underlying problems -- it may be part of the train wreck, so-to-speak.
In any case, while the system is up and running you can try the following to fix the issue or to at least try to eliminate the CEEment program from the mix.
Download Install a new copy of the latest version of the HP Support Assistant on your system:
HP Support Assistant
If you have ‘Admin’ control, you may highlight the package and “double-click” to install it, else Right-Click, Select run as Administrator and install.
Reboot the system
If you like, you can switch OFF the CEEment program and the other checks that HP Support Assistant performs on your system.
Example (HP Support Assistant Version 7.4.45.4)
Open the HP Support Assistant > Settings >
Scroll down to Warranty and Services >
Next to Check warranty now >>
CHECK No, I do not want to send this data >
Scroll down to Would you like to share anonymous usage data with HP? >
CHECK No >
Under Welcome Screen (if necessary) >>
UNCHECK Show a welcome screen when I open HP Support Assistant >
Click Save
Dragon Tips
You may want to create an extra / new account with administrator privileges on the computer in case the issue is related in some way to your account.
You do want to make sure you have your personal data backed up -- make an extra effort to make sure your critical data is backed up somewhere other than on the computer. Make a copy of those files to a USB drive or to the Cloud. Make sure you include your bookmarks.
You may like to take a look at the following in case your computer's File System has issues:
Using System File Checker (SFC) to Restore System Files
A good Second Resource on the same subject:
Windows 7: SFC /SCANNOW Command - System File Checker
NOTE: SFC can be run more than one time!
A different type of check that can be run at boot time:
How to Run Check Disk at Startup in Vista or Windows 7
Things That are Blue
Free tool: BlueScreenView v1.52
Windows approach - works up to and including Windows 7:
How to read the small memory dump file that is created by Windows if a crash occurs
More Help:
dmp file and blue screen error Windows 7
Blue Screen of Death Survival Guide: Every Error Explained
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

Blue screen of death and restart.

Hi, I'm running Windows 7 through Boot Camp. I recently did updates for Windows 7 and had no issues. I use Windows 7 for online gaming only, prior to the new updates I had no issues. In the last two days I have experienced the blue screen of death and had my system restart back to the Apple OS. I then have to restart the computer to launch Boot Camp for Windows. Is ther anyone else having this issue? Or should I conduct a restore and prior to the recent updates?

Any update regarding this issue?
now the iphone shutdown by itself

Gateway FX and Blue Screen of Death

Similar Messages

Maybe you are looking for