Gateway on Dialog Instance
Hello
On the Dialog instance I am getting error
LOCATION SAP-Gateway on host devserver14 / sapgw10
ERROR partner 'devserver1:sapgw10' not reached
Apart from this, when I log on to SAP Central Instance I check SMGW, here gateway running. But same TCODE at Dialog Instance nothing appears.
To my understanding thee should be only one gateway in the entire system. How can I ectigy this error
Maintain the ports in the service file in both your CI and DI.... just add sapgwXX 33XX/tcp for each instance (where XX is the instance number), and make sure the host of your DI is maintained in the host file of the CI and viceversa, that should solve the problem.
Theres 1 gateway per instance.
Regards
Juan
Similar Messages
-
Problem in updating Dialog instance kernel
Dear all,
I've a ECC 5 central instance runs on a sparc solaris machine, kernel version 175. The DB is oracle.
I tried to install a dialog instance on a win2k3 machine.
The installation was success, and the Dialog Instance can ran well. The kernel version of the DI is 43, so i want to update the kernel to version 175.
But when i tried to upgrade the kernel of the DI, it cannot start.
The error messsage is:
ERROR => platform patchno is 43 [dpxxdisp.c 14862]
ERROR => but my patchno is 175 [dpxxdisp.c 14863]
DP_FATAL_ERROR => Release inconsistent with running system
DISPATCHER EMERGENCY SHUTDOWN ***
It seem like the system still stuck with the old kernel. Please help me to solve this problem.
Below is the complete log from dev_disp.
Thanks a lot,
Fendhy.
trc file: "dev_disp", trc level: 1, release: "640"
Mon Aug 20 16:40:58 2007
kernel runs with dp version 134(ext=102) (@(#) DPLIB-INT-VERSION-134)
length of sys_adm_ext is 312 bytes
sysno 01
sid PRD
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 175
intno 20020600
make: multithreaded, ASCII
pid 2632
***LOG Q00=> DpSapEnvInit, DPStart (01 2632) [dpxxdisp.c 1102]
shared lib "dw_xml.dll" version 175 successfully loaded
shared lib "dw_xtc.dll" version 175 successfully loaded
shared lib "dw_stl.dll" version 175 successfully loaded
shared lib "dw_gui.dll" version 175 successfully loaded
shared lib "dw_mdm.dll" version 175 successfully loaded
Mon Aug 20 16:41:03 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [ dpxxtool2.c 3896]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpIPCInit2: start server >bmiapp2_PRD_01 <
DpShMCreate: sizeof(wp_adm) 4968 (828)
DpShMCreate: sizeof(tm_adm) 2379840 (11840)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (364)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 047E0040, size: 2663800)
DpShMCreate: allocated sys_adm at 047E0040
DpShMCreate: allocated wp_adm at 047E17D8
DpShMCreate: allocated tm_adm_list at 047E2B40
DpShMCreate: allocated tm_adm at 047E2B68
DpShMCreate: allocated wp_ca_adm at 04A27BA8
DpShMCreate: allocated appc_ca_adm at 04A2C1F8
DpShMCreate: allocated comm_adm_list at 04A2D968
DpShMCreate: allocated comm_adm at 04A2D980
DpShMCreate: allocated vmc_adm_list at 04A5C780
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 04A5C7A8
DpShMCreate: allocated wall_adm at 04A5C7B0
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 3965 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( bmiapp) [dpxxdisp.c 10051]
DpStartStopMsg: send start message (myname is >bmiapp2_PRD_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
ERROR => platform patchno is 43 [ dpxxdisp.c 14862]
ERROR => but my patchno is 175 [dpxxdisp.c 14863]
DP_FATAL_ERROR => Release inconsistent with running system
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-2296 (SIGUSR2)
ERROR => DpWpKill(2296, SIGUSR2) failed [dpxxtool.c 2507]
killing W1-3340 (SIGUSR2)
ERROR => DpWpKill(3340, SIGUSR2) failed [dpxxtool.c 2507]
killing W2-1536 (SIGUSR2)
ERROR => DpWpKill(1536, SIGUSR2) failed [dpxxtool.c 2507]
killing W3-2952 (SIGUSR2)
ERROR => DpWpKill(2952, SIGUSR2) failed [dpxxtool.c 2507]
killing W4-2428 (SIGUSR2)
ERROR => DpWpKill(2428, SIGUSR2) failed [ dpxxtool.c 2507]
killing W5-180 (SIGUSR2)
ERROR => DpWpKill(180, SIGUSR2) failed [dpxxtool.c 2507]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 20 16:41:13 2007
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Mon Aug 20 09:41:13 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2296 Run yes 0 0 0
1 DIA 3340 Run yes 0 0 0
2 DIA 1536 Run yes 0 0 0
3 DIA 2952 Run yes 0 0 0
4 BTC 2428 Run yes 0 0 0
5 BTC 180 Run yes 0 0 0
Dispatcher Queue Statistics Mon Aug 20 09:41:13 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
11
11
2000
11
0
--------++++--
+
DIA
2
2
2000
2
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 15
wake_evt_udp_now 1
wake events total 13, udp 1 ( 7%), shm 12 ( 92%)
since last update total 13, udp 1 ( 7%), shm 12 ( 92%)
Dump of tm_adm structure: Mon Aug 20 09:41:13 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Aug 20 09:41:13 2007
=============================
Slots: 300, Used: 6, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
74
DISPATCHER
-1
WPCAAD074
111
DISPATCHER
-1
WPCAAD111
148
DISPATCHER
-1
WPCAAD148
185
DISPATCHER
-1
WPCAAD185
222
DISPATCHER
-1
WPCAAD222
259
DISPATCHER
-1
WPCAAD259
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 20 16:41:18 2007
NiISelect: TIMEOUT occured (5000 ms)
DpHalt: shutdown server >bmiapp2_PRD_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_OFF
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
[DpWpDied] W0 lives (PID:2296 HANDLE:1564)
[DpWpDied] W1 lives (PID:3340 HANDLE:1560)
[DpWpDied] W2 lives (PID:1536 HANDLE:1556)
[DpWpDied] W3 lives (PID:2952 HANDLE:1552)
[DpWpDied] W4 lives (PID:2428 HANDLE:1548)
[DpWpDied] W5 lives (PID:180 HANDLE:1544)
Stop work processes...
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 20 16:41:19 2007
NiISelect: TIMEOUT occured (1000 ms)
wait for end of exclusive shutdown
[DpWpDied] W0 died (PID:2296 HANDLE:1564)
[DpWpDied] W1 died (PID:3340 HANDLE:1560)
[DpWpDied] W2 died (PID:1536 HANDLE:1556)
[DpWpDied] W3 died (PID:2952 HANDLE:1552)
[DpWpDied] W4 died (PID:2428 HANDLE:1548)
[DpWpDied] W5 died (PID:180 HANDLE:1544)
Stop gateway
killing process (3208) (SOFT_KILL)
Stop icman
killing process (3336) (SOFT_KILL)
Terminate gui connections
[DpWpDied] W0 handle not set (PID:2296)
[DpWpDied] W1 handle not set (PID:3340)
[DpWpDied] W2 handle not set (PID:1536)
[DpWpDied] W3 handle not set (PID:2952)
[DpWpDied] W4 handle not set (PID:2428)
[DpWpDied] W5 handle not set (PID:180)
[DpProcDied] Process lives (PID:3208 HANDLE:1568)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 20 16:41:20 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3208 HANDLE:1568)
[DpProcDied] Process lives (PID:3336 HANDLE:1572)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 20 16:41:21 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3336 HANDLE:1572)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 20 16:41:22 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3336 HANDLE:1572)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 20 16:41:23 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3336 HANDLE:1572)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 20 16:41:24 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3336 HANDLE:1572)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 20 16:41:25 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3336 HANDLE:1572)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 20 16:41:26 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3336 HANDLE:1572)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 20 16:41:27 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3336 HANDLE:1572)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 20 16:41:28 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3336 HANDLE:1572)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 20 16:41:29 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3336 HANDLE:1572)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 20 16:41:30 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3336 HANDLE:1572)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
DpStartStopMsg: send stop message (myname is >bmiapp2_PRD_01 <)
NiIMyHostName: hostname = 'bmiapp2'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: read 114, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=114
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER, typ 0, key -
DpHalt: received 4 bytes from message server
NiIRead: read 114, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=114
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER, typ 0, key -
DpHalt: received 4 bytes from message server
NiIRead: read 114, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=114
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER, typ 0, key -
DpHalt: received 4 bytes from message server
NiIRead: read 114, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=114
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER, typ 0, key -
DpHalt: received 4 bytes from message server
NiIRead: read 214, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=214
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 214 bytes
MSG received, len 110+104, flag 3, from MSG_SERVER, typ 0, key -
DpHalt: received 104 bytes from message server
NiIRead: read 562, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=562
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 562 bytes
MSG received, len 110+452, flag 1, from bmiapp_PRD, typ 0, key -
DpHalt: received 452 bytes from message server
NiIRead: read 562, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=562
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 562 bytes
MSG received, len 110+452, flag 1, from bmiapp_PRD, typ 0, key -
DpHalt: received 452 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 578, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=578
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 578 bytes
MSG received, len 110+468, flag 1, from - , typ 0, key -
DpHalt: received 468 bytes from message server
NiIRead: read 562, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=562
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 562 bytes
MSG received, len 110+452, flag 1, from bmiapp_PRD, typ 0, key -
DpHalt: received 452 bytes from message server
NiPRead: WSAEWOULDBLOCK 1.time 4
NiIPeek: peek for hdl 3 / socket 1532 timed out (r; 0)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: write 114, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiPRead: WSAEWOULDBLOCK 1.time 4
NiIPeek: peek successful for hdl 3 / socket 1532 (r)
NiIRead: read 114, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=114
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER, typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiPRead: WSAEWOULDBLOCK 1.time 4
Mon Aug 20 16:41:31 2007
NiIPeek: peek for hdl 3 / socket 1532 timed out (r; 1000)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 10308]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1532
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 2632) [dpxxdisp.c 8766]
Good Bye .....There are two reasons that cause this kind of issue:
1. An attempt is made to start two instances with the same operating
system but a different kernel patch.
2. Kernels are exchanged on one or several instances with an operating
system that differs from the one of the central instance without
restarting the central instance.
In your case, it might be the second one. I write down the solutions
for both cases anyway:
for 1. Upgrade the kernel to the same patch level on all R/3 system
instances with the same operating system.
for 2. The following alternatives are available:
a) Restart the system to have the message server determine the new
patch level automatically.
b) Enter the new patch number in the message server status area
which previously contained the old patch level:
- Transaction SMLG
- Goto -> System Diagnosis -> Message server status area
- Enter new patch level.
This should solve the issue.
Regards,
Anil K Kunapareddy -
Automatic shutdown of SAP Instance after installation of Dialog Instance
Hi all,
We've upgraded our system from SAP4.6C to ECC6.0 running on Win2003 64 bits Oracle 10g.
After upgrade, we installed Dialog instance (this dialog instance is running outside MS cluster) and it is running on Microsoft cluster. When we try to start up SAP dialog instance, the system is started but it automatically shuts down again.
Below are the trace for DEV_DISP
=============================
trc file: "dev_disp", trc level: 1, release: "700"
sysno 03
sid P02
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, ASCII, 64 bit, optimized
pid 3216
Wed Nov 22 12:32:40 2006
kernel runs with dp version 217(ext=109) (@(#) DPLIB-INT-VERSION-217)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (03 3216) [dpxxdisp.c 1237]
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Nov 22 12:32:51 2006
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0091.qqq.nxst) took 11 seconds
Wed Nov 22 12:33:08 2006
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 17 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >AP2_P02_03 <
DpShMCreate: sizeof(wp_adm) 5376 (896)
DpShMCreate: sizeof(tm_adm) 4663200 (23200)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
DpShMCreate: sizeof(comm_adm) 552064 (1088)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1496)
DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000007DA0050, size: 5314128)
DpShMCreate: allocated sys_adm at 0000000007DA0050
DpShMCreate: allocated wp_adm at 0000000007DA1AB0
DpShMCreate: allocated tm_adm_list at 0000000007DA2FB0
DpShMCreate: allocated tm_adm at 0000000007DA3010
DpShMCreate: allocated wp_ca_adm at 00000000082157B0
DpShMCreate: allocated appc_ca_adm at 0000000008219E00
DpShMCreate: allocated comm_adm at 000000000821B570
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 00000000082A21F0
DpShMCreate: allocated gw_adm at 00000000082A2270
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 00000000082A22A0
DpShMCreate: allocated wall_adm at 00000000082A22B0
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
Wed Nov 22 12:33:09 2006
***LOG Q0K=> DpMsAttach, mscon ( SAPGRPP02) [dpxxdisp.c 11586]
DpStartStopMsg: send start message (myname is >AP2_P02_03 <)
DpStartStopMsg: start msg sent to message server o.k.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
Release check o.K.
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
Wed Nov 22 12:33:49 2006
ERROR => W0 (pid 1100) died [dpxxdisp.c 14241]
ERROR => W1 (pid 1112) died [dpxxdisp.c 14241]
ERROR => W2 (pid 1856) died [dpxxdisp.c 14241]
ERROR => W3 (pid 576) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0x99 --> 0x98
ERROR => W4 (pid 1368) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0x98 --> 0x90
ERROR => W5 (pid 1108) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0x90 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:33:59 2006
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Nov 22 04:33:59 2006
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 1100 Ended no 1 0 0
1 DIA 1112 Ended no 1 0 0
2 DIA 1856 Ended no 1 0 0
3 DIA 576 Ended no 1 0 0
4 BTC 1368 Ended no 1 0 0
5 SPO 1108 Ended no 1 0 0
Dispatcher Queue Statistics Wed Nov 22 04:33:59 2006
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 11
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Wed Nov 22 04:33:59 2006
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Wed Nov 22 04:33:59 2006
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:04 2006
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >AP2_P02_03 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1096) (SOFT_KILL)
Stop icman
killing process (748) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1096 HANDLE:536)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:05 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1096 HANDLE:536)
wait for end of icman
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:06 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:07 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:08 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:09 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:10 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:11 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:12 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:13 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:14 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:15 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:16 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:748 HANDLE:544)
DpStartStopMsg: send stop message (myname is >AP2_P02_03 <)
NiIMyHostName: hostname = 'AP2'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to MSG_SERVER, type 1
DpStartStopMsg: stop msg sent to message server o.k.
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Wed Nov 22 12:34:17 2006
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11899]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 548 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 548 (pos=2)
SiSelNRemove: removed sock 548
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/6
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 14)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 548
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3216) [dpxxdisp.c 10259]
Good Bye .....
Below is the trace for DEV_W0
==========================
M patchno 75
M intno 20050900
M make: multithreaded, ASCII, 64 bit, optimized
M pid 1100
M
M kernel runs with dp version 217(ext=109) (@(#) DPLIB-INT-VERSION-217)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1100) [dpxxdisp.c 1299]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 5376 (896)
M DpShMCreate: sizeof(tm_adm) 4663200 (23200)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
M DpShMCreate: sizeof(comm_adm) 552064 (1088)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1496)
M DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000DDA0050, size: 5314128)
M DpShMCreate: allocated sys_adm at 000000000DDA0050
M DpShMCreate: allocated wp_adm at 000000000DDA1AB0
M DpShMCreate: allocated tm_adm_list at 000000000DDA2FB0
M DpShMCreate: allocated tm_adm at 000000000DDA3010
M DpShMCreate: allocated wp_ca_adm at 000000000E2157B0
M DpShMCreate: allocated appc_ca_adm at 000000000E219E00
M DpShMCreate: allocated comm_adm at 000000000E21B570
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000E2A21F0
M DpShMCreate: allocated gw_adm at 000000000E2A2270
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000E2A22A0
M DpShMCreate: allocated wall_adm at 000000000E2A22B0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host AP2
M
M Wed Nov 22 12:33:10 2006
M calling db_connect ...
C Prepending E:\usr\sap\P02\D03\exe to Path.
M call semaphore clean-up function ...
M ***LOG Q0E=> DpSigGenHandler, Exception (c06d007e) [dpnttool.c 432]
M -
C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c06d007e (Unknown exception)
App : disp+work.EXE (pid=1100)
When : 11/22/2006 12:33:14.515
Threads : 2
Computer Name : AP2
User Name : SAPServiceP02
Number of Processors: 4
Processor Type: EM64T Family 6 Model 15 Stepping 6
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id 440
--> (FAULT) Stack Back Trace <--
FramePtr ReturnAd Param#1 Function Name
000000000678f720 00000000078488ca 0000000000000003 kernel32!PulseEvent
000000000678f7f0 0000000007847fe6 0000000007926000 dboraslib!__delayLoadHelper2 [delayhlp.cpp (271)]
000000000678f860 00000000078136cd 000000000678f8b0 dboraslib!_tailMerge_OCI_dll
000000000678f8c0 000000000782f3d8 0000003d00000000 dboraslib!get_oci_client_version [dboci.c (2766)]
000000000678fa90 0000000001182107 000000000678fd80 dboraslib!DbSlConnect [dbsloci.c (1835)]
000000000678fce0 000000000118251e 0000000000000000 disp+work!open_con [dbcon.c (3582)]
000000000678fd50 00000000011856de 00000000ffffffff disp+work!supply_con [dbcon.c (3830)]
000000000678fd90 000000000117826c 0000000000000001 disp+work!dbsl_connect [dbslxxx.c (232)]
000000000678fdf0 00000000004ca16a 000000000755476c disp+work!db_connect [dblink.c (422)]
000000000678fe80 00000000004cf609 0000000006d6bdfd disp+work!ThInit [thxxhead.c (1404)]
000000000678feb0 000000000042c9e6 ffffffff00000002 disp+work!ThStart [thxxhead.c (1114)]
000000000678fee0 0000000000401097 ffffffff00000003 disp+work!DpMain [dpxxdisp.c (1119)]
000000000678ff10 00000000018919c1 0000000000000000 disp+work!nlsui_main [thxxanf.c (82)]
000000000678ff70 0000000078d5965c 0000000000000000 disp+work!mainCRTStartup [crtexe.c (501)]
000000000678ffa0 0000000000000000 0000000001891850 kernel32!BaseProcessStart
State Dump for Thread Id c70
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Function Name
000000000bd9fe40 0000000078d5f611 0000000006d31460 ntdll!NtFsControlFile
000000000bd9feb0 000000000178a99f 0000000000000000 kernel32!ConnectNamedPipe
000000000bd9ff40 000007ff7fc411c4 0000000000000000 disp+work!SigIMsgFunc [signt.c (595)]
000000000bd9ff70 0000000078d6b66a 0000000078d6b630 msvcrt!endthreadex
000000000bd9ffa0 0000000000000000 0000000000000000 kernel32!BaseThreadStart
M -
M
M Wed Nov 22 12:33:15 2006
M call clean-up function ...
M in_ThErrHandle: 1
M ThSigHandler: signal (step 1, th_errno 11, action 4)
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *****************************************************************************
M *
M * LOCATION SAP-Server AP2_P02_03 on host AP2 (wp 0)
M * ERROR ThSigHandler: signal
M *
M * TIME Wed Nov 22 12:33:15 2006
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 11
M * MODULE thxxhead.c
M * LINE 10354
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1100) [dpnttool.c 327]
M return from clean-up function ...
Does anybody has a solution for this problem?
Thank you.Hi all again,
I had the same problem and found a solution for it.
I made two steps to start the dialog instance successful. First I modified the NLS_LANG setting in the registry and enviroment (only if necessary). Second, I fetched the last Oracle Instant Client <b>OCL10264.sar</b> from SAP Net and extract the file to <b>E:\usr\sap\PDV\SYS\exe\nuc\NTAMD64</b> (This directory was created through the Installer. The Kernel lies under <b>E:\usr\sap\PDV\D20\exe</b>)
Now I changed the variable <b>DIR_CLIENT_ORAHOME = $(DIR_EXECUTABLE)</b> to
<b>DIR_CLIENT_ORAHOME = E:\usr\sap\PDV\SYS\exe\nuc\NTAMD64</b> in the Instance Profile of the new Dialog Instance. So the Kernel knows that he has to use the Oracle Instance Client and the profilevariable says where he found it.
After these modifications the Dialog Instance starts with success.
With kind regards
Thomas Espenhain -
Multiple dialog instances on same host for different System
Dear Sir,
I install two dialog instances on same host ,one for DEV one for QAS.
First I install dialog instance for DEV and startup with no error.
Second dialog instance for QAS install with success end ,but can not start dispatchers.
Service
sapmsDEV 3600/tcp # SAP System Message Port
sapmsQAS 3601/tcp # SAP System Message Port
sapdp01s 4701/tcp # SAP System Dispatcher Security Port
sapgw01s 4801/tcp # SAP System Gateway Security Port
sapdp00 3200/tcp # SAP System Dispatcher Port
sapdp00s 4700/tcp # SAP System Dispatcher Security Port
sapgw00 3300/tcp # SAP System Gateway Central Instance Port
sapgw00s 4800/tcp # SAP System Gateway Security Port
Disp_dev
***LOG Q0I=> NiPConnect2: SiPeekPendConn (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 8716]
ERROR => MsIAttachEx: NiBufConnect to sap-qas/sapmsQAS failed (rc=NIECONN_REFUSED) [msxxi.c 633]
***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c 1549]
Stderr
D:\usr\sap\QAS\D01\work>ntscmgr start MSSQLSERVER -m sap-qas
failure: StartService, NT ErrorMessage: An instance of the service is already running. StartService SUCCESS
D:\usr\sap\QAS\D01\work>ntscmgr start SQLSERVERAGENT -m sap-qas
failure: StartService, NT ErrorMessage: An instance of the service is already running. StartService SUCCESS
It seem that first startup dialog instance already start MSSQLSERVER -m sap-dev and SQLSERVERAGENT -m sap-dev, so next instance can not start again ,and cause NICONN_REFUSED.
Could someone help me?
Thanks
Regards,
MattIt appears to be possible, at least in IDM 7.1
The release notes and Installation guide reference a setting called waveset.serverId that you set in your application server startup script like so:
-Dwaveset.serverId=Name
This would allow each JVM to identify itself differently from any others running on the same physical server.
I haven't tried this yet myself, so caveat emptor.
Jason -
Windows Central Instance ABAP+JAVA plus UNIX ABAP dialog instances ?
Hi everybody,
we are an SAP software partner and provide SAP complementary software on UNIX and Windows platforms.
Part of our software (a gateway) needs to be installed on the SAP application server.
In order to setup a cross-platform test environment for our developers, I was thinking about extending the existing SAP ERP 6.0 Windows-based Central Instance (IDES, Oracle, usage types ABAP+JAVA) by multiple ABAP dialog instances which run on different UNIX flavours (Solaris, AIX, Linux).
I searched the SAP Notes and found nothing which could confirm my plans, as this is quite an unusual setup and heterogenous systems are usually the other way round (CI on UNIX, DI on Windows).
SAP Note 1067221 however mentions that DIs on different OS platforms are only partly supported, but it seems this is only valid for JAVA DIs?
As I need only ABAP DIs, I hope my plans are fine?
Many thanks for your feedback
Markus> I searched the SAP Notes and found nothing which could confirm my plans, as this is quite an unusual setup and heterogenous systems are usually the other way round (CI on UNIX, DI on Windows).
Well - what is "usual" depends on the requirements
It's possible to do that. Technically there's no difference whether an application server is Unix or Windows based.
There are, however, a few things to take care of:
- if your system is non-Unicode, sorting algorithms are different on different platforms. Unicode systems use ICU which is cross-platform
- if you want to automatically distribute your kernel on system start you will need to create a "share" on the Windows machine and make it accessible from the various other platforms. You can, however, ensure "manually", that you use the same kernel patchlevels on all systems, then this is not needed
- Windows is LittleEndian whereas most Unix systems are BigEndian, depending on if you exchange data between those systems (means, binary data, files through NFS) the programs must be aware of the fact, that a file can be either LE or BE.
Markus -
Hi Friends
If more than one dialog instance can be installed in a computer?
I have installed a sap system(abap stack), central instance and dialog instance are in the same server. the dialog instance has started up, but I can't see the dialog instance through SM51. If some configuration is missing?
tons of thanks.
smhtrc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
M sysno 00
M sid S01
M systemid 399 (New architecture with Linux)
M relno 6400
M patchlevel 0
M patchno 56
M intno 20020600
M make: single threaded, Unicode, 64 bit
M pid 13770
M
M
M Sat May 9 00:32:26 2009
M ***LOG Q01=> tskh_init, WPStart (Workproc 0 1 13770) [thxxhead.c 1131]
M calling db_connect ...
C
C DBADASLIB : version 640.00, patch 0.055 (Make PL 0.56)
C SAPDB shared library (dbadaslib) patchlevels (last 10)
C (0.055) Min. release check of non default connection removed (note 807218)
C (0.055) Statistic data in ST05 corrected (note 807216)
C (0.039) Invalid data of STAD corrected (note 779116)
C (0.039) Do not abort session after -810 (note 780238)
C (0.035) Sapdb_free invalid address (note 766340)
C (0.035) EXPLAIN with non character inputvariables (note 770755)
C (0.032) Sapdb_free invalid address (note 766340)
C (0.032) Abap info for performance montior (note 216208)
C (0.032) SAPDB min. release is 7.4.3 (note 326487)
C (0.031) Set isolation level calls optimized (note 762712)
C
C
C INFO : SQLOPT= -I 0 -t 0 -F SAPDB.13770.pct
C Precompiler Runtime : C-PreComp 7.5.0 Build 026-123-094-430
C Precompiler runtime is SAP DB 7.5.0.026
C Try to connect (DEFAULT) on connection 0 ...
C
C Sat May 9 00:32:27 2009
C Attach to SAP DB : Kernel 7.5.0 Build 026-123-094-430
C Database release is SAP DB 7.5.0.026
C INFO : Database 'S01' instance is running on 'saps01'
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPS01'
C 00: DB_000 saps01-S01, conn=1, since=20090509003227
C ABAP= <unknown> (0)
C Now I'm connected to SAP DB
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20090509 003226 saps01
C INFO : SAP RELEASE (DB) = 640
M db_connect o.k.
I
I Sat May 9 00:32:31 2009
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0x2ba866adb000, size: 4400000)
M SHM_ROLL_AREA (addr: 0x2ba9763af000, size: 134217728)
M SHM_PAGING_AREA (addr: 0x2ba97e3af000, size: 67108864)
M SHM_ROLL_ADM (addr: 0x2ba866f0f000, size: 2672386)
M SHM_PAGING_ADM (addr: 0x2ba9823af000, size: 656416)
M ThCreateNoBuffer allocated 556152 bytes for 1000 entries at 0x2ba982452000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 0x2ba988f20000
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation map
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 8
B dbtbxbuf: Buffer TABL (addr: 0x2ba9896b9100, size: 30000000, end: 0x2ba98b355480)
B dbtbxbuf: Buffer TABLP (addr: 0x2ba98b356100, size: 10240000, end: 0x2ba98bd1a100)
B dbexpbuf: Buffer EIBUF (addr: 0x2ba98bd1a108, size: 4194304, end: 0x2ba98c11a108)
B dbexpbuf: Buffer ESM (addr: 0x2ba98c11b108, size: 4194304, end: 0x2ba98c51b108)
B dbexpbuf: Buffer CUA (addr: 0x2ba98545e108, size: 3072000, end: 0x2ba98574c108)
B dbexpbuf: Buffer OTR (addr: 0x2ba98c51c108, size: 4194304, end: 0x2ba98c91c108)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
S
S Sat May 9 00:32:33 2009
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0x14dbd1f0
S
S Sat May 9 00:32:34 2009
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S intervals: query=50, rescan=1800, global=300 info=120
S processing queue enabled
S creating spool memory service RSPO-RCLOCKS at 0x2ba98574e070
S doing lock recovery
S setting server cache root
S using server cache size 100 (prof=100)
S creating spool memory service RSPO-SERVERCACHE at 0x2ba98574e388
S using messages for server info
B dbtran INFO (init_connection '<DEFAULT>' [ADABAS D:640.00]):
B max_blocking_factor = 10, max_in_blocking_factor = 127,
B min_blocking_factor = 10, min_in_blocking_factor = 127,
B prefer_union_all = 1, prefer_union_for_select_all = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->0, dbif->0x1, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2168 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A Sat May 9 00:32:35 2009
A
A -PXA--
A PXA INITIALIZATION
A PXA: Fragment Size too small: 36 MB, reducing # of fragments
A System page size: 4kb, admin_size: 5540kb.
A Attached to PXA (address 0x2ba98cb1e000, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A
A Sat May 9 00:32:36 2009
A ABAP ShmAdm attached (addr=0x2ba9695b7000 leng=20955136 end=0x2ba96a9b3000)
A >> Shm MMADM area (addr=0x2ba969aaed80 leng=242176 end=0x2ba969ae9f80)
A >> Shm MMDAT area (addr=0x2ba969aeb000 leng=15499264 end=0x2ba96a9b3000)
A RFC Destination> destination saps01_S01_00 host saps01 system S01 systnr 0 (saps01_S01_00)
A RFC Options> H=saps01,S=00
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC abap/SIGCHILD_default not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
A Hotpackage version: 9
M ThrCreateShObjects allocated 8460 bytes at 0x2ba995de8000
N SsfSapSecin: putenv(SECUDIR=/usr/sap/S01/DVEBMGS00/sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is /usr/sap/S01/SYS/exe/run/libsapsecu.so .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
W =================================================
W === ipl_Init() called
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 640, [6400.0.56.20020600]
W ITS Plugin: Int.version, [31]
W ITS Plugin: Feature set: [4]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
M MBUF info for hooks: MS component UP
M ThSetEnqName: set enqname by server list
M ThISetEnqname: enq name = >saps01_S01_00 <
E
E *************** EnqId_EN_ActionAtMsUpHook ***************
E Hook on upcoming Ms (with EnqSrv), get auth EnqId and check it locally
E Enqueue Info: enque/disable_replication = 2
E Enqueue Info: replication disabled
E
E *************** ObjShMem_CheckAuthoritativeEnqId ***************
E Checking authoritative EnqId from EnqSrv into ObjShMem
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: EnqId is initial in ShMem
E ObjShMem_CheckAuthoritativeEnqId: Overwrite incoming auth EnqId, continue
E EnqId inscribed into initial ObjShMem: (ObjShMem_CheckAuthoritativeEnqId)
E -SHMEM--
E EnqId: EnqTabCreaTime/RandomNumber = 09.05.2009 00:32:36 1241800356 / 13770
E ReqOrd at Srv: TimeInSecs/ReqNumberThisSec = 09.05.2009 00:32:36 1241800356 / 2
E ReqOrd at Cli: TimeInSecs/ReqNumberThisSec = 09.05.2009 00:32:36 1241800356 / 1
E Status: STATUS_OK
E -
M ThActivateServer: state = STARTING
L Begin of BtcSysStartRaise
L Raise event SAP_SYSTEM_START with parameter <saps01_S01_00 >
L End of BtcSysStartRaise
M MBUF info for hooks: MS component UP
M ThActivateServer: state = STARTING
S
S Sat May 9 00:32:38 2009
S server @>SSRV:saps01_S01_00@< appears or changes (state 1)
S
S Sat May 9 00:32:39 2009
S server @>SSRV:saps01_S01_00@< appears or changes (state 1)
I MPI<6>3#17 Peak buffer usage: 5 (@ 64 KB)
S
S Sat May 9 00:32:58 2009
S server @>SSRV:saps01_S01_10@< appears or changes (state 5)
S server @>SSRV:saps01_S01_10@< appears or changes (state 5)
S
S Sat May 9 00:33:18 2009
S server @>SSRV:saps01_S01_10@< appears or changes (state 3)
S server @>SSRV:saps01_S01_10@< vanished
N
N Sat May 9 00:34:29 2009
N login/password_change_for_SSO : 1 -> 1
B
B Sat May 9 00:34:35 2009
B dbmyclu : info : my major identification is 171442396, minor one 0.
B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
B dbmyclu : info : my uuid is D65E044AA45ECA35E10000000A3800DC.
B dbmyclu : info : current optimistic cluster level: 2
B dbmyclu : info : pessimistic reads set to 2.
S
S Sat May 9 00:40:53 2009
S found spool memory service RSPO-ACTIONS at 0x2ba9857567d0
B
B Sat May 9 12:02:53 2009
B table logging switched off for all clients
M
M Sat May 9 12:02:55 2009
M ***LOG R49=> ThCPICSyncWait, CPIC-Error (026665) [thxxcpic.c 3544]
M ***LOG R64=> ThCPICSyncWait, CPIC-Error ( CMINIT(SAP)) [thxxcpic.c 3557]
M
M *****************************************************************************
M *
M * LOCATION SAP-Gateway on host saps01 / sapgw00
M * ERROR service 'sapgw30' unknown
M *
M * TIME Sat May 9 12:02:55 2009
M * RELEASE 640
M * COMPONENT NI (network interface)
M * VERSION 37
M * RC -3
M * MODULE niuxi.c
M * LINE 521
M * DETAIL NiPGetServByName: service 'sapgw30' not found
M * SYSTEM CALL getservbyname
M * COUNTER 1357
M *
M *****************************************************************************
M
A RFC 1446 CONVID
A * CMRC=26 DATA=0 STATUS=0 SAPRC=665 ThSAPECMINIT
A RFC> ABAP Programm: RSLDAGDS (Transaction: RZ70)
A RFC> User: JXIONG (Client: 000)
A RFC> Destination: SLD_UC (handle: 1, , )
A *** ERROR => RFC ======> CPIC-CALL: 'ThSAPECMINIT'
Service name is not known
[abrfcio.c 7594]
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1462
CPIC-CALL: 'ThSAPECMINIT'
Service name is not known
DEST =SLD_UC
HOST =%%RFCSERVER%%
PROG =SLD_UC
GWHOST =10.56.0.169
GWSERV =sapgw30
[abrfcio.c 7594]
A TH VERBOSE LEVEL FULL
M
M Sat May 9 14:07:53 2009
M WARNING ==> PfFileIndUpd: new starttime < starttime -
Problems in Dialog instance installation for ECC6.0(ABAP+JAVA)
Does anyone can help me what should be a procedure of installing Dialog instance for ECC 6.0 with both ABAP + Java Stacks.
When installing app server do we also choose ABAP and Java or just ABAP. Installation manual does not cover this and when we run the sapinst we have following problem:
<u>The following are the activities that I have done as pre-reqs on the standby on the server that is to host dialog instance</u>
I have mounted the following file systems on ddrsap02. Created the local filesystem /usr/sap/DSP/D00 and NFS mounted the others
/dev/appsaph 5505024 5503856 1% 5 1% /usr/sap/DSP/D00 <b>(is this required or SAPINST should create it itself)</b>
ddrsap00:/stage 419430400 149761708 65% 90835 1% /stage
dprsap01:/sapmnt/DSP 4718592 2888416 39% 12790 2% /sapmnt/DSP
ddrsap12:/usr/sap/trans 2752512 1084932 61% 5107 3% /usr/sap/trans
Then when I run the sapinst from ddrsap02 to install the DI I get the following error
ddrsap02[/tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI]#vi sapinst_dev.log
"sapinst_dev.log" 20516 lines, 641048 characters
TRACE
Running with toplevel file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI/toplevel.xml
Running with dialog file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI/dialog.xml
Running with keydb file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI/keydb.xml
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_exe.397528.1170221882.
Opened iaejs701.o
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI.
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_exe.397528.1170221882.
Opened iacdlib701.o
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI.
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_exe.397528.1170221882.
Opened iaccdlib.o
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI.
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_exe.397528.1170221882.
Opened iapasswdman701.o
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI.
This is SAPinst, version 701, make variant 700_REL, build 817256
compiled on Mar 14 2006, 23:39:26
TRACE [syxxsyshlp.cpp:175]
syslib::logSystemState()
Process environment
===================
Environment Variables
=====================
_ = /tmp/sapinst_exe.397528.1170221882/sapinstexe
SAPINST_EXE_DIR = /tmp/sapinst_exe.397528.1170221882
LANG = en_US
LOGIN = root
PATH = /usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin:/usr/java14_64/jre/bin:/usr/java14_64/bin
SAPINST_EXEDIR_CD = /stage/51031797/IM_AIX_PPC64/.
LC__FASTMSG = true
WINDOWID = 8388621
"sapinst_dev.log" 20516 lines, 641048 characters
EJS_Installer::writeTraceToLogBook()
2007-01-31 09:42:48.898 NWDB.getDBHost() done: undefined
<i><b>ERROR 2007-01-31 09:42:48 [iaxxinscbk.cpp:271]
abortInstallation
CJS-00030 Assertion failed: in getSidFromProfiles: Variable dbHost should be defined</b></i>
TRACE [iaxxejsbas.hpp:388]
handleException<ESAPinstException>()
Converting exception into JS Exception Exception.
ERROR 2007-01-31 09:42:48
CJSlibModule::writeError_impl()
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
TRACE [iaxxejsbas.hpp:460]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2007-01-31 09:42:48
FCO-00011 The step assertDBInfo with step key |NW_DI|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|1|0|assertDBInfo was executed with status ERROR .
<html><head></head><body><p>An error occurred while processing service <b>SAP ERP 2005 Support Release 1 > SAP Systems > Oracle > High-Availability System > Base
d on AS ABAP and AS Java > Dialog Instance</b>. You may now</p><ul> <li>press <I>Retry</I> to repeat the current step.</li> <li>press the <I>View Log</I> button
to get more information about the error.</li> <li>stop the task and continue with it later.</li></ul><p>Log files are written to <b>/tmp/sapinst_instdir/ERP/SYST
EM/ORA/HA/ABAPJAVA/DI</b>.</p></body></html>
TRACE [iaxxgenimp.cpp:1093]
showDialog()
waiting for an answer from gui
Am I missing some pre-reqs or variable definitions?
I was going through the documentation and it says that /sapmnt/DSP/exe should be a local filesystem for a DI on a separate server. Will this create a problem ?
Also they talk about starting sapinst with the variable SAPINST_USE_HOSTNAME set to ddrsap02. I have tried this also
We are also not 100% sure about the settings for parameters:
rdisp/mssserv
rdisp/mssserv_internal
Accorss Devault Instance and Services Instance profile.
When we define it as per installation GUIDE (Abap+Java page 64) we get the popup message in SAPINST:
<b><html>Profile parameter <em>rdisp/msserv_internal</em> is not set for instance DVEBMGS01/DSP on host dprsap01.<p>You have to set the parameter in the default profile and restart the instance.<p>For further information refer to SAP Note 821875.</html></b>
Other errors follow shortly.
Any help would be appreciatedHi ,
are you able to resolve this error :Profile parameter rdisp/msserv_internal is not set for instance DVEBMGS01/DSP on host dprsap01.
You have to set the parameter in the default profile and restart the instance.
For further information refer to SAP Note 821875.</html>
? if yes , pls let me know , I am stuck with same issue while installing dialog instance .
Thanks
Hamendra -
SAP Dialog Instance Installation.
Hi
Installation of ABAP System ECC6.0
I am trying to install another application server(Dialog Instance) on
different host. My both System Central(main server) and Dialog system in
same domain. I am installing SAP Server as a Local Installation.
I am able to installed Dialog Instance on same Host of Central System. But
when I was trying to installation it on different Host, I got error on
u201CStart Dialog Instanceu201D step that is last step it cant able to start Dialog
Instance.
Can you please tell me the Prerequisite for this type of setup as well as
any other Setting related to u201Chostsu201D and u201Cservicesu201Dfile ? and also central system
side settings.
Following Error is occurred :
u201CCopy Errors detected.................: 0
Sync Errors detected.................: 0
Warnings detected....................: 0
INFO 2008-11-21 13:14:39
Execute step createOsCol of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
nd|ind|ind|ind|1|0.
WARNING[E] 2008-11-21 13:14:40
FSL-06002 Error 1060 (The specified service does not exist as an installed
service.
) in execution of a 'OpenService' function, line (266), with parameter
(SAPOsCol).
INFO 2008-11-21 13:14:41
Creating file C:\Program
Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DI\ntscmgr.exe.log.
INFO 2008-11-21 13:14:41
Output of
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\ntscmgr.exe remove SAPOsCol
is written to the logfile ntscmgr.exe.log.
INFO 2008-11-21 13:14:41
Execution of the command "
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\ntscmgr.exe
remove SAPOsCol" finished with return code 0. Output:
failure: OpenService (0x424)
INFO 2008-11-21 13:14:41
The 'SAPOsCol' service on the 'Local' machine was created successfully.
INFO 2008-11-21 13:14:45
The service 'SAPOsCol' started successfully on host 'Local'.
INFO 2008-11-21 13:14:46
Execute step createService of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
nd|ind|ind|ind|1|0.
INFO 2008-11-21 13:14:46
Creating SAP start service of instance PT6/D02...
INFO 2008-11-21 13:14:47
Creating file C:\Program
Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DI\sapstartsrv.exe.log.
INFO 2008-11-21 13:14:47
Output of D:\usr\sap\PT6\D02\exe\sapstartsrv.exe -r -q -p
i3643vm\sapmnt\PT6\SYS\profile\START_D02_I3976vm2 -s PT6 -n 02 -U
I3976vm2\SAPServicePT6 -P XXXXXX -e I3976vm2\pt6adm is written to the
logfile sapstartsrv.exe.log.
INFO 2008-11-21 13:14:53
Execution of the command "D:\usr\sap\PT6\D02\exe\sapstartsrv.exe -r -q -p
i3643vm\sapmnt\PT6\SYS\profile\START_D02_I3976vm2 -s PT6 -n 02 -U
I3976vm2\SAPServicePT6 -P XXXXXX -e I3976vm2\pt6adm" finished with return
code 0. Output:
Service succesfully installed.
INFO 2008-11-21 13:14:53
Execute step setServiceSecurity of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
nd|ind|ind|ind|1|0.
INFO[E] 2008-11-21 13:14:58
FSL-01027 Account user="I3976vm2\SAP_PT6_LocalAdmin" does not exist.
INFO 2008-11-21 13:14:58
Successfully set '(S-1-5-21-134454618-3270849815-193169279-1011, NONE, + |
SERVICE_START | SERVICE_STOP)(S-1-5-18, NONE, +o | READ_CONTROL |
SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE
| SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP
| SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ |
STANDARD_RIGHTS_WRITE)(S-1-5-32-544, NONE, + | DELETE | READ_CONTROL |
SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS |
SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG |
SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP |
SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE
| WRITE_DAC | WRITE_OWNER)(S-1-5-4, NONE, + | READ_CONTROL |
SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_QUERY_CONFIG |
SERVICE_QUERY_STATUS | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ |
STANDARD_RIGHTS_WRITE)(S-1-5-6, NONE, + | READ_CONTROL |
SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_QUERY_CONFIG |
SERVICE_QUERY_STATUS | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ |
STANDARD_RIGHTS_WRITE)(S-1-5-11, NONE, + | SERVICE_USER_DEFINED_CONTROL)(S-
1-5-32-547, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS |
SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG |
SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP |
SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ |
STANDARD_RIGHTS_WRITE)(S-1-5-21-134454618-3270849815-193169279-1009, NONE, +
| DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG |
SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE
| SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP
| SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ |
STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)' security to service
I3976vm2\SAPPT6_02' on computer 'I3976vm2'.
INFO 2008-11-21 13:14:58
Execute step createCCMSService of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
nd|ind|ind|ind|1|0.
WARNING[E] 2008-11-21 13:14:58
FSL-06002 Error 1060 (The specified service does not exist as an installed
service.
) in execution of a 'OpenService' function, line (266), with parameter
(sapccmsr.02).
INFO 2008-11-21 13:14:59
Creating file C:\Program
Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DI\ntscmgr.exe.log.
INFO 2008-11-21 13:14:59
Output of
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\ntscmgr.exe remove
sapccmsr.02 is written to the logfile ntscmgr.exe.log.
INFO 2008-11-21 13:14:59
Execution of the command "
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\ntscmgr.exe
remove sapccmsr.02" finished with return code 0. Output:
failure: OpenService (0x424)
INFO 2008-11-21 13:14:59
Execute step setCCMSServiceSecurity of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
nd|ind|ind|ind|1|0.
INFO 2008-11-21 13:15:00
Execute step registerEventsDLL of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
nd|ind|ind|ind|1|0.
INFO 2008-11-21 13:15:09
Execute step setICMBndPermissions of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
nd|ind|ind|ind|1|0.
INFO 2008-11-21 13:15:09
Execute step copyRFCExecSec of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
INFO 2008-11-21 13:15:10
Copied file '
i3643vm/sapmnt/PT6/SYS/exe/uc/NTI386/rfcexec.sec' to
'D:/usr/sap/PT6/D02/work'.
INFO 2008-11-21 13:15:11
Execute step callSetDB4PWD of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
INFO 2008-11-21 13:15:13
Execute step unpackJ2EEINSTALL of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
INFO 2008-11-21 13:15:13
Execute step runBatchconfig of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
INFO 2008-11-21 13:15:13
Execute step removeTempDirectory of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
INFO 2008-11-21 13:15:14
Execute step start of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
INFO 2008-11-21 13:15:14
Starting instance PT6/DVEBMGS00...
INFO 2008-11-21 13:15:15
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:15
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:15
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:15
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:15
Starting instance PT6/D02...
INFO 2008-11-21 13:15:22
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:22
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:22
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:22
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:35
Creating file C:\Program
Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DI\stop_PT6_D02.log.
INFO 2008-11-21 13:15:35
Output of
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\stopsap.exe name=PT6 nr=02
SAPDIAHOST=I3976vm2 is written to the logfile stop_PT6_D02.log.
INFO 2008-11-21 13:15:43
Execution of the command "
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\stopsap.exe
name=PT6 nr=02 SAPDIAHOST=I3976vm2" finished with return code 0. Output:
STOPSAP executed succesfully
INFO 2008-11-21 13:15:46
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:46
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:46
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:46
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:48
Creating file C:\Program
Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DI\start_PT6_D02.log.
INFO 2008-11-21 13:15:48
Output of
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\startsap.exe name=PT6 nr=02
SAPDIAHOST=I3976vm2 is written to the logfile start_PT6_D02.log.
INFO 2008-11-21 13:16:21
Execution of the command "
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386
\startsap.exe name=PT6 nr=02 SAPDIAHOST=I3976vm2" finished with return code
0. Output:
STARTSAP continues...
INFO 2008-11-21 13:16:21
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:16:21
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:16:21
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:16:21
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:16:22
State of instance PT6/D02 changed from ABAP: UNKNOWN to ABAP: UNKNOWN.
INFO 2008-11-21 13:16:50
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:16:50
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:16:50
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:16:50
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:17:23
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:17:23
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:17:23
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:17:23
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:17:24
State of instance PT6/D02 changed from ABAP: STARTING to ABAP: STARTING.
ERROR 2008-11-21 13:17:24
CJS-30105 Instance PT6/D02 reached state UNKNOWN after having state
STARTING. Giving up.
ERROR 2008-11-21 13:17:24
FCO-00011 The step start with step key
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|start was
executed with status ERROR .
Thanks in advance.
Regards
ManojHi, I'm Josephine and I almost have the same scenario as this problem reported earlier but it's just that we are using SAP Netweaver 04 SR1.
However, I'm installing additional SAP Application server to our existing one.
Our existing main server is in MS cluster. SAPPRD1 (DB Server in node A) and SAPPRD2 (SAP App Server in node B). System ID is PRD and the CI Instance number is 00. The hostname where the USR folder is SAPPRD (hostname in the cluster environment but this is the SAPPRD2 server in node B).
Now I'm installing additional SAP App server into a new host (SAPPRD3 & SAPPRD4) they are all in the same domain.
But I would like to install the 2nd and 3rd SAP App server in a local host.
While installing there was an error "Output: Service not started" the process "Create or reregister services" during the installation stopped.
I used the installer under the folder InstMaster\IM01_NT_I386\SAPINST\NT\I386\sapinst.exe and run the Dialog Instance under the SAP Netweaver\ABAP System\MS SQL Server\Unicode\.
This is the part of the sapinst log where the error starts:
PHASE 2009-01-28 08:39:29
Preparing DBMS-specific profile parameters
INFO 2009-01-28 08:39:30
Adapt operation t_SAPComponent_Profiles_SHARED processed successfully.
PHASE 2009-01-28 08:39:31
Handle services
INFO 2009-01-28 08:39:32
Creating file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_MSS_UC\DI\sapstartsrv.exe.log.
INFO 2009-01-28 08:39:32
Output of C:\usr\sap\PRD\D02\exe/sapstartsrv.exe '-r' '-q' '-p' '
sapprd\sapmnt\PRD\SYS\profile\START_D02_sapprd4' '-s' 'PRD' '-n' '02' '-U' 'sapprd4\SAPServicePRD' '-P' 'XXXXXX' '-e' 'sapprd4\prdadm' is written to the logfile sapstartsrv.exe.log.
WARNING 2009-01-28 08:39:35
Execution of the command "C:\usr\sap\PRD\D02\exe/sapstartsrv.exe '-r' '-q' '-p' '
sapprd\sapmnt\PRD\SYS\profile\START_D02_sapprd4' '-s' 'PRD' '-n' '02' '-U' 'sapprd4\SAPServicePRD' '-P' 'XXXXXX' '-e' 'sapprd4\prdadm'" finished with return code -1. Output: Service not started.
ERROR 2009-01-28 08:39:35
MOS-01011 'C:\usr\sap\PRD\D02\exe/sapstartsrv.exe' returned with '-1'.
Please help me on this I can't successfully install another dialog instance to add to our existing one now.
Thank you and hoping for your reply.
Yours truly,
Josephine Dejolde -
BI : dialog instance does not start
Hi all.
--> Before explain you our problem, I'm going to tell you our scenario: We have an HP-UX cluster where we have installed BI system ABAP+JAVA stack (NW 701). We have got one central package with SAP and oracle in node1 and one dialog instance in node2.
--> When we start the cluster, central instance starts succesfully and all works fine. But at the moment we start dialog one in second node, for this instance only starts ABAP stack, but not java one. All logs shows a clear error, and it is that not connect to database. But at the same time, in central instance we are not able to start configtool because not connection to database. It's strange because in all nodes, processes are running. Just at the moment we stop dialog instance, central one works fine again and configtool access is succesfully.
Lot of bootstrap logs appear, so we are thinking that some parameters are wrong in configtool, but we are not so sure.
Can anybody help us with this issue? What can be causing that database connection is lost when starting dialog instance?
Thanks a lot to all in advance.
Best regardsHi,
which way you apply kernel patch on application server for iseries?
use following method to apply kernel patch on application server for iseries.
stop application server.
download the kernel sapexe.sar and saexedb.sar application server on windows for iseries.
extract both file in one folder. i.e kernel
also download patch for IGS i.e igs.sar
and extract it in same folder. i.e kernel
now
backup NTI386 folder on iSeries host.
\usr\sap\SID\SYS\exe\uc\NTI386
now copy the content of extracted kernel from folder kernel to NTI386 folder.
now start the application server host.
consider following to install application server for iseries on windows server.
if you use a 64 bit windows server, please have look to Note 734428:
This Application Server (64 bit) is available for EM64T/AMD64 technologies and NOT for Itanium
also check Note 680617 - INST: Appl.Server in Heterogeneous SAP System Environment
regards,
kaushal
Edited by: kaushal malavia on Apr 1, 2008 10:16 AM -
Installing Java Dialog Instance - Error while connecting to DB
We would like to add a dialog instance to our production Portal server. We installed Portal as stand-alone on the central instance. We have another server we would like to setup to serve as a Portal dialog instance.
So far I have installed Windows 2003 Server Standard. Installed MSSQL server client tools (database is mssql server). Installed jdk 1.4.62. Set java home and path environmental variables. I'm now installing the Java dialog instance (I can't find any documentation on this). From Netweaver installation CD> SAP NetWeaver '04 Support Release 1> Java System> MS SQL Server> Dialog Instance Installation>
SAP System ID: (sid) ES2
Central Host: SAPEPS02
Path to JAVA DVD supplied> JDK Directory confirmed> Domain paramaters confirmed> domain<sid> account passwords supplied> domain<service><sid> account password supplied> Instance number confirmed>
Installation started> It gets to step 8 and fails stating "Error while connecting to DB". I looked through all the log files and couldn't come up with anything (i'm very thorough).
I tried adding the users to the database as dbowners (no luck). I installed SQL server 2000 with SP4. No where during this installation did I get prompted for database parameters?
Is there something basic i'm missing? Does this scenario not work? Any help would be greatly appreciated. Pointing me in the right direction of the correct documentation would also be appreciated. Thank you in advance.
Sincerely,
Brad DridiHi Brad,
I am facing the same problem. I hope by now you must have got the solution for this.
Can you please let me know how did you overcome this situation?
Thank you!!
Regards,
Abhijeet Bhagat -
Error installing Dialog Instance ABAP+JAVA
Hi,
We're having a little issue with installation of a ERP dialog instance. The problem is, when the initial
installation was made, it was a system copy but not in the traditional way, the partner performed a copy
in OS level (cp -rp .... , etc). Once it was finished, renaming of certain this happended.
As we can see, DEV was the initial installation (normal way) but QAS and PRD were copies of DEV ( oracle
schema in PRD is SAPDEV too) this apparently doesn't cause a problem. But now the installer of a dialog
instance stops with this error:
PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path
com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>
(DBConnectionPool.java:115)
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>
(PersistenceHandler.java:38)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>
(ConfigurationCache.java:149)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init
(ConfigurationManagerBootstrapImpl.java:236)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>
(ConfigurationManagerBootstrapImpl.java:49)
at com.sap.engine.configtool.batch.BatchConfig.go(BatchConfig.java:47)
at com.sap.engine.configtool.batch.BatchConfig.main(BatchConfig.java:83)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: com.sap.sql.log.OpenSQLException: Error while accessing secure store: The encryption key
(usually in the key file) is not the key that is required to decrypt the data in the secure store file or
the system name (SID) is wrong..
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:106)
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:145)
at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:226)
at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:197)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>
(DBConnectionPool.java:112)
... 11 more
Caused by: com.sap.security.core.server.secstorefs.WrongKeyException: The encryption key (usually in the
key file) is not the key that is required to decrypt the data in the secure store file or the system name
(SID) is wrong.
at com.sap.security.core.server.secstorefs.SecStoreFS.openExistingStore(SecStoreFS.java:2017)
at com.sap.sql.connect.OpenSQLConnectInfo.getStore(OpenSQLConnectInfo.java:802)
at com.sap.sql.connect.OpenSQLConnectInfo.lookup(OpenSQLConnectInfo.java:783)
at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:209)
... 13 more
Caused by: com.sap.security.core.server.secstorefs.InvalidStateException: Internal error during the
decryption process.
at com.sap.security.core.server.secstorefs.Crypt.decrypt(Crypt.java:850)
at com.sap.security.core.server.secstorefs.SecStoreFS.openExistingStore(SecStoreFS.java:1985)
... 16 more
Caused by: javax.crypto.BadPaddingException: Invalid PKCS#5 padding length: 176
at iaik.security.cipher.s.b(Unknown Source)
at iaik.security.cipher.w.a(Unknown Source)
at iaik.security.cipher.w.engineDoFinal(Unknown Source)
at javax.crypto.Cipher.doFinal(DashoA12275)
at com.sap.security.core.server.secstorefs.Crypt.decrypt(Crypt.java:825)
... 17 more
Error while connecting to DB.
The error occurs when the installer tries to connect to oracle via jdbc, but the files
SecStore.properties and SecStore.key are from DEV, and they were created with the values of DEV, so when
the installer tries with PRD as central instance name, it doesn't work, how can we recreate this files or
reconfigure the j2ee engine so the installer can connect and finish installation ?
Thanks in advanceExactly, the problem is when the installer tries to execute the following:
/usr/j2se/bin/java -classpath /tmp/sapinst_instdir/ERP/LM/AS/ORA/DI/install/shar
edlib/launcher.jar -Xmx256m -d64 -d64 com.sap.engine.offline.OfflineToolStart co
m.sap.engine.configtool.batch.BatchConfig /usr/sap/PRD/SYS/global/security/lib/t
ools/iaik_jce.jar:/usr/sap/PRD/SYS/global/security/lib/tools/iaik_jsse.jar:/usr/
sap/PRD/SYS/global/security/lib/tools/iaik_smime.jar:/usr/sap/PRD/SYS/global/sec
urity/lib/tools/iaik_ssl.jar:/usr/sap/PRD/SYS/global/security/lib/tools/w3c_http
.jar:/tmp/sapinst_instdir/ERP/LM/AS/ORA/DI/install/lib:/tmp/sapinst_instdir/ERP/
LM/AS/ORA/DI/install/sharedlib:/oracle/client/10x_64/instantclient/ojdbc14.jar /
tmp/sapinst_instdir/ERP/LM/AS/ORA/DI/BatchConfig.xml
The file /tmp/sapinst_instdir/ERP/LM/AS/ORA/DI/BatchConfig.xml has this:
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE config [
<!ELEMENT config (dbproperties, task*)>
<!ELEMENT dbproperties (property*)>
<!ELEMENT task (property*)>
<!ATTLIST task name CDATA #REQUIRED>
<!ELEMENT property (#PCDATA)>
<!ATTLIST property key CDATA #REQUIRED>
<!ATTLIST property value CDATA #REQUIRED>
]>
<config>
<dbproperties>
<property key="rdbms.maximum_connections" value="5"/>
<property key="system.name" value="PRD"/>
<property key="secstorefs.keyfile" value="/sapmnt/PRD/global/security/data/S
ecStore.key"/>
<property key="secstorefs.secfile" value="/sapmnt/PRD/global/security/data/S
ecStore.properties"/>
<property key="secstorefs.lib" value="/sapmnt/PRD/global/security/lib"/>
<property key="rdbms.driverLocation" value="/oracle/client/10x_64/instantcli
ent/ojdbc14.jar"/>
<property key="rdbms.connection" value="jdbc/pool/PRD"/>
<property key="rdbms.initial_connections" value="1"/>
As you can see the are values "system.name" with PRD. This cause an error:
PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path
com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:115)
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:38)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:149)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:236)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:49)
at com.sap.engine.configtool.batch.BatchConfig.go(BatchConfig.java:47)
at com.sap.engine.configtool.batch.BatchConfig.main(BatchConfig.java:83)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: com.sap.sql.log.OpenSQLException: Error while accessing secure store: The encryption key (usually in the key file) is not the key that is required to decrypt the data in the secure store file or the system name (SID) is wrong..
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:106)
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:145)
at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:226)
at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:197)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:112)
... 11 more
Caused by: com.sap.security.core.server.secstorefs.WrongKeyException: The encryption key (usually in the key file) is not the key that is required to decrypt the data in the secure store file or the system name (SID) is wrong.
at com.sap.security.core.server.secstorefs.SecStoreFS.openExistingStore(SecStoreFS.java:2017)
at com.sap.sql.connect.OpenSQLConnectInfo.getStore(OpenSQLConnectInfo.java:802)
at com.sap.sql.connect.OpenSQLConnectInfo.lookup(OpenSQLConnectInfo.java:783)
at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:209)
... 13 more
Caused by: com.sap.security.core.server.secstorefs.InvalidStateException: Internal error during the decryption process.
at com.sap.security.core.server.secstorefs.Crypt.decrypt(Crypt.java:850)
at com.sap.security.core.server.secstorefs.SecStoreFS.openExistingStore(SecStoreFS.java:1985)
... 16 more
Caused by: javax.crypto.BadPaddingException: Invalid PKCS#5 padding length: 176
at iaik.security.cipher.s.b(Unknown Source)
at iaik.security.cipher.w.a(Unknown Source)
at iaik.security.cipher.w.engineDoFinal(Unknown Source)
at javax.crypto.Cipher.doFinal(DashoA12275)
at com.sap.security.core.server.secstorefs.Crypt.decrypt(Crypt.java:825)
... 17 more
The same as configtool with PRD value.
So can we change the system.name value to PRD and is there a posibility to change the encpytion key so it can be used with PRD value ??
My theory is: The SecStore.key file is used to decript the SecStore.properties but the system.name value plays an important role in decryption, am I right??
Can I regenerate the key with the system.name = PRD so the error solves??
Regards. -
How to patch the sapjvm in either NW7.1 or NW7.3 in a dialog instance
Hi, all.
I only found the procedure to patch sapjvm 5.1 or 6.1 using JSPM. Actually SAP is saying only patching sapjvm with JSPM is supported. However, we all know that jspm cannot be started on a dialog instance. So how do you patch it on a dialog instance? I have spent the last 2 hours searching on the SDN and service marketplace and come up empty.
Note that you cannot manually copy the jvm directory either because the sapcpe will somehow pick up the executable in the older version and copy it into /usr/sap/SID/DXX/exe. Again, SAP manages to change something simple into 10 times more complicated and it is totally pointless.
Thanks,
Jonathan.Did you manage to get this working?
If yes ... what did you do?
I am having the same problem implementing commons-logging with log4j -
Dialog instance for portal installation error in db2 linux
Dear all,
i am installing a dialog instance for the exsisting portal server for the load balancing .while installing i am facing the following error.
SAPINST_DEV.log is as follows
TRACE 2011-08-17 12:17:39.380
NWException thrown: nw.configError:
Java EE Engine configuration error. DIAGNOSIS: See output of logfile batchconfig.log: '
Warning : /usr/sap/ESP/SYS/global/db6/jdbc/db2jcc.jar file stated but does not exist !
Warning : /usr/sap/ESP/SYS/global/db6/jdbc/db2jcc_license_cu.jar file stated but does not exist !
Can not get DB connection. Batchconfig will only be able to execute offline tasks. '.
TRACE 2011-08-17 12:17:39.380
Function setMessageIdOfExceptionMessage: nw.configError
WARNING[E] 2011-08-17 12:17:39.381
CJSlibModule::writeError_impl()
CJS-30059 Java EE Engine configuration error. DIAGNOSIS: See output of logfile batchconfig.log: '
Warning : /usr/sap/ESP/SYS/global/db6/jdbc/db2jcc.jar file stated but does not exist !
Warning : /usr/sap/ESP/SYS/global/db6/jdbc/db2jcc_license_cu.jar file stated but does not exist !
Can not get DB connection. Batchconfig will only be able to execute offline tasks. '.
TRACE 2011-08-17 12:17:39.381 [iaxxejsbas.hpp:483]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
TRACE 2011-08-17 12:17:39.398 [syuxctask.cpp:1382]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 7072
TRACE 2011-08-17 12:17:39.435 [syuxctask.cpp:1382]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 7073
ERROR 2011-08-17 12:17:39.718 [sixxcstepexecute.cpp:951]
FCO-00011 The step runBatchconfig with step key |NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|runBatchconfig was executed with status ERROR .
TRACE 2011-08-17 12:17:39.727 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing service SAP NetWeaver 7.0 Support Release 3 > Software Life-Cycle Options > Application Server > IBM DB2 for Linux, UNIX, and Windows > Dialog Instance. You may now </p> <ul> <li> choose <i>Retry</i> to repeat the current step. </li> <li> choose <i>View Log</i> to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> <p> Log files are written to /tmp/sapinst_instdir/NW04S/LM/AS/DB6/DI. </p> </body></html>
TRACE 2011-08-17 12:17:39.727 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
SAPINST.log error
INFO 2011-08-17 12:17:36.946
Creating file /tmp/sapinst_instdir/NW04S/LM/AS/DB6/DI/batchconfig.log.
INFO 2011-08-17 12:17:36.971
Output of /opt/IBMJava2-amd64-142/bin/java -classpath /tmp/sapinst_instdir/NW04S/LM/AS/DB6/DI/install/sharedlib/launcher.jar -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.engine.configtool.batch.BatchConfig /usr/sap/ESP/SYS/global/security/lib/tools:/tmp/sapinst_instdir/NW04S/LM/AS/DB6/DI/install/lib:/tmp/sapinst_instdir/NW04S/LM/AS/DB6/DI/install/sharedlib:/usr/sap/ESP/SYS/global/db6/jdbc/db2jcc.jar:/usr/sap/ESP/SYS/global/db6/jdbc/db2jcc_license_cu.jar /tmp/sapinst_instdir/NW04S/LM/AS/DB6/DI/BatchConfig.xml is written to the logfile batchconfig.log.
WARNING 2011-08-17 12:17:39.377
Execution of the command "/opt/IBMJava2-amd64-142/bin/java -classpath /tmp/sapinst_instdir/NW04S/LM/AS/DB6/DI/install/sharedlib/launcher.jar -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.engine.configtool.batch.BatchConfig /usr/sap/ESP/SYS/global/security/lib/tools:/tmp/sapinst_instdir/NW04S/LM/AS/DB6/DI/install/lib:/tmp/sapinst_instdir/NW04S/LM/AS/DB6/DI/install/sharedlib:/usr/sap/ESP/SYS/global/db6/jdbc/db2jcc.jar:/usr/sap/ESP/SYS/global/db6/jdbc/db2jcc_license_cu.jar /tmp/sapinst_instdir/NW04S/LM/AS/DB6/DI/BatchConfig.xml" finished with return code 183. Output:
Warning : /usr/sap/ESP/SYS/global/db6/jdbc/db2jcc.jar file stated but does not exist !
Warning : /usr/sap/ESP/SYS/global/db6/jdbc/db2jcc_license_cu.jar file stated but does not exist !
Can not get DB connection. Batchconfig will only be able to execute offline tasks.
WARNING[E] 2011-08-17 12:17:39.381
CJS-30059 Java EE Engine configuration error. DIAGNOSIS: See output of logfile batchconfig.log: '
Warning : /usr/sap/ESP/SYS/global/db6/jdbc/db2jcc.jar file stated but does not exist !
Warning : /usr/sap/ESP/SYS/global/db6/jdbc/db2jcc_license_cu.jar file stated but does not exist !
Can not get DB connection. Batchconfig will only be able to execute offline tasks. '.
ERROR 2011-08-17 12:17:39.718
FCO-00011 The step runBatchconfig with step key |NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|runBatchconfig was executed with status ERROR .
kindly help on this issue.
Regards
Revantha Vishnu> Java EE Engine configuration error. DIAGNOSIS: See output of logfile batchconfig.log: '
What do you see in that log?
Markus -
SAP Dialog Instance is not Starting - DISPATCHER EMERGENCY SHUTDOWN
Hi All,
We are running on SAP ECC 6.0, Oracle 10, Windows 2003.
We have One Central Instance an Two Dialog Instances, we shutdown the SAP system ( Jun 10 15:56:18 2008 ) to do an OFFLINE backup, now one of the Dialog Instances is no starting, we try to restart the system on Wed Jun 11 02:05:45 2008
Oracle is Up and Open.
The Central Instance and one of the Dialog Instances are Up, so you can login on the SAP System, and execute SAP transactions.
I will Attach Our DEV_DISP, and DEV_W0 files:
dev_dip
trc file: "dev_disp", trc level: 1, release: "700"
sysno 02
sid MIS
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 133
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 4008
Wed Jun 11 02:05:45 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (02 4008) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 133 successfully loaded
shared lib "dw_xtc.dll" version 133 successfully loaded
shared lib "dw_stl.dll" version 133 successfully loaded
shared lib "dw_gui.dll" version 133 successfully loaded
shared lib "dw_mdm.dll" version 133 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Jun 11 02:05:50 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >SAPPREC2_MIS_02 <
DpShMCreate: sizeof(wp_adm) 37008 (1480)
DpShMCreate: sizeof(tm_adm) 56268128 (28120)
DpShMCreate: sizeof(wp_ca_adm) 80000 (80)
DpShMCreate: sizeof(appc_ca_adm) 160000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=2000/16/2208064/2208080
DpShMCreate: sizeof(comm_adm) 2208080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (416064/346352/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000CCF0050, size: 59524432)
ERROR => DpShMCreate: ShmCreate SHM_DP_CA_KEY(rc=4) [dpxxca.c 181]
ERROR => DpIPCInit2: DpShMCreate [dpxxtool2.c 462]
DP_FATAL_ERROR => DpSapEnvInit: DpIPCInit2
DISPATCHER EMERGENCY SHUTDOWN ***
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Jun 11 02:05:55 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >SAPPREC2_MIS_02 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
call semaphore clean-up function ...
***LOG Q0E=> DpSigGenHandler, Exception (c0000005) [dpnttool.c 432]
C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c0000005 (Access Violation)
App : disp+work.EXE (pid=4008)
When : 6/11/2008 2:5:55.274
Threads : 2
Computer Name : SAPPREC2
User Name : SAPServiceMIS
Number of Processors: 4
Processor Type: EM64T Family 6 Model 15 Stepping 6
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id 11ec
--> (FAULT) Stack Back Trace <--
FramePtr ReturnAd Param#1 Function Name
0000000007d1f2e0 000000000041a395 0000000000000001 disp+work!DpVmcCheckDebugProxy [dpxxvmc.c (1211)]
0000000007d1f3d0 000000000041d007 0000000005561401 disp+work!DpHalt [dpxxdisp.c (10016)]
0000000007d1fc10 0000000000421a1b 0000000002671ab0 disp+work!DpFatalErr [dpxxdisp.c (17789)]
0000000007d1feb0 000000000042d570 0000000000000000 disp+work!DpSapEnvInit [dpxxdisp.c (1388)]
0000000007d1fee0 000000000040108d ffffffff00000002 disp+work!DpMain [dpxxdisp.c (1076)]
0000000007d1ff10 00000000019c7dd1 0000000000000000 disp+work!nlsui_main [thxxanf.c (84)]
0000000007d1ff70 0000000077d5966c 0000000000000000 disp+work!wmainCRTStartup [crtexe.c (498)]
0000000007d1ffa0 0000000000000000 00000000019c7c60 kernel32!BaseProcessStart
State Dump for Thread Id 1194
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Function Name
000000000ccefe40 0000000077d5f651 0000000007d7bc60 ntdll!NtFsControlFile
000000000ccefeb0 00000000018ae00f 0000000000000000 kernel32!ConnectNamedPipe
000000000cceff40 000007ff7fc411c4 0000000000000000 disp+work!SigIMsgFunc [signt.c (679)]
000000000cceff70 0000000077d6b69a 0000000077d6b660 msvcrt!endthreadex
000000000cceffa0 0000000000000000 0000000000000000 kernel32!BaseThreadStart
call clean-up function ...
SigICallExitRoutine: call exithandler (DpHalt)
DpHalt: shutdown server >SAPPREC2_MIS_02 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
DpShmPrfSwitch : State already set (OFF)
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
And our dev_w0
this file was no modifued since we stop SAP System.
M Tue Jun 10 15:56:18 2008
M *** WARNING => ThSndDelUser: delete client/user 020/RMENDOZA (T60) on server SAPPREC1_MIS_01
S
S Tue Jun 10 19:07:40 2008
S server @>SSRV:SAPPREC1_MIS_01@< appears or changes (state 3)
M
M Tue Jun 10 19:07:52 2008
M in_ThErrHandle: 1
M ThIErrHandle: new stat of W0 is WP_SHUTDOWN
M ThIErrHandle: I'm during shutdown
M PfStatDisconnect: disconnect statistics
M Entering ThSetStatError
M ThCallDbBreak: use db_sqlbreak
M ThIErrHandle: don't try rollback again
M ThShutDownServer: shutdown server
M PfStatIndInit: Initializing Index-Record
M PfWriteIntoFile: copied shared buf (0 bytes) to local buf
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
B Disconnecting from ALL connections:
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 INACTIVE NO YES NO 000 255 255 20080610 144648 SAPPRECDB
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=000000000866D128,usrhp=0000000007D91058)
C Detaching from DB Server (con_hdl=0,svchp=000000000866D128,srvhp=0000000018D61918)
C Now I'm disconnected from ORACLE
B Disconnected from connection 0
B statistics db_con_commit (com_total=29203, com_tx=3253)
B statistics db_con_rollback (roll_total=494, roll_tx=0)
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2632) [dpnttool.c 327]
Please Some Tips!
Best Regards,
Erick ILarrazaHi Deepak,
Thanks a lot for your reply, in this case the problem was with the Dialog Instance (Only SAP apps, not Oracle).
We shutdown the instance with the Microsoft SAP Management Console (right button -> Stop).
In general to shutdown the SAP System we first:
1. Shutdown The Dialog Instance. (SAP Management Console)
2. Shutdown The Central Instance. (SAP Management Console)
3. Shutdown Oracle (BR*Tools).
4. Stop SAP and Oracle Services.
Maybe is more a problem of Windows Memory Management.....
Best Regards,
Erick ILarraza -
Hi All,
FYI, my SAP PRD running on 3 tier SAP server configuration. Yesterday, after stop the instances, i start the services.
So far 2 servers instances (CI & DI) can be started, but 1 DI server could not be started.I had restart the dialog instance server but the the SAP still can't start.
Below is the log file for DEV_DISP:
trc file: "dev_disp", trc level: 1, release: "640"
Fri Mar 26 15:07:41 2010
kernel runs with dp version 130(ext=102) (@(#) DPLIB-INT-VERSION-130)
length of sys_adm_ext is 312 bytes
sysno 03
sid PRD
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 129
intno 20020600
make: multithreaded, ASCII
pid 3524
***LOG Q00=> DpSapEnvInit, DPStart (03 3524) [dpxxdisp.c 1098]
Fri Mar 26 15:07:42 2010
shared lib "dw_xml.dll" version 129 successfully loaded
shared lib "dw_xtc.dll" version 129 successfully loaded
shared lib "dw_stl.dll" version 129 successfully loaded
shared lib "dw_gui.dll" version 129 successfully loaded
shared lib "dw_mdm.dll" version 129 successfully loaded
Fri Mar 26 15:07:46 2010
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3893]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpIPCInit2: start server >bashful_PRD_03 <
DpShMCreate: sizeof(wp_adm) 18216 (828)
DpShMCreate: sizeof(tm_adm) 2379840 (11840)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (364)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 05830040, size: 2677040)
DpShMCreate: allocated sys_adm at 05830040
DpShMCreate: allocated wp_adm at 058317D0
DpShMCreate: allocated tm_adm_list at 05835EF8
DpShMCreate: allocated tm_adm at 05835F20
DpShMCreate: allocated wp_ca_adm at 05A7AF60
DpShMCreate: allocated appc_ca_adm at 05A7F5B0
DpShMCreate: allocated comm_adm_list at 05A80D20
DpShMCreate: allocated comm_adm at 05A80D38
DpShMCreate: allocated vmc_adm_list at 05AAFB38
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05AAFB60
DpShMCreate: allocated wall_adm at 05AAFB68
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
Fri Mar 26 15:07:47 2010
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 12499 blocks reserved for free list.
ES initialized.
Fri Mar 26 15:07:48 2010
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( sneezyapp) [dpxxdisp.c 9915]
DpStartStopMsg: send start message (myname is >bashful_PRD_03 <)
DpStartStopMsg: start msg sent
Fri Mar 26 15:07:49 2010
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
Release check o.K.
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
Fri Mar 26 15:08:28 2010
ERROR => W0 (pid 2592) died [dpxxdisp.c 12414]
ERROR => W1 (pid 2596) died [dpxxdisp.c 12414]
ERROR => W2 (pid 2624) died [dpxxdisp.c 12414]
ERROR => W3 (pid 2632) died [dpxxdisp.c 12414]
ERROR => W4 (pid 2644) died [dpxxdisp.c 12414]
ERROR => W5 (pid 2648) died [dpxxdisp.c 12414]
ERROR => W6 (pid 2672) died [dpxxdisp.c 12414]
ERROR => W7 (pid 2680) died [dpxxdisp.c 12414]
ERROR => W8 (pid 2700) died [dpxxdisp.c 12414]
ERROR => W9 (pid 2708) died [dpxxdisp.c 12414]
ERROR => W10 (pid 2712) died [dpxxdisp.c 12414]
ERROR => W11 (pid 2720) died [dpxxdisp.c 12414]
my types changed after wp death/restart 0x9b --> 0x9a
ERROR => W12 (pid 2736) died [dpxxdisp.c 12414]
ERROR => W13 (pid 2744) died [dpxxdisp.c 12414]
ERROR => W14 (pid 2764) died [dpxxdisp.c 12414]
ERROR => W15 (pid 2788) died [dpxxdisp.c 12414]
ERROR => W16 (pid 2812) died [dpxxdisp.c 12414]
ERROR => W19 (pid 2852) died [dpxxdisp.c 12414]
ERROR => W20 (pid 2864) died [dpxxdisp.c 12414]
my types changed after wp death/restart 0x9a --> 0x92
ERROR => W21 (pid 2892) died [dpxxdisp.c 12414]
my types changed after wp death/restart 0x92 --> 0x82
And below is the file for DEV_W0:
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Fri Mar 26 15:07:50 2010
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\PRD\D03\exe\dbmssslib.dll' ...
B Library 'D:\usr\sap\PRD\D03\exe\dbmssslib.dll' loaded
B Version of 'D:\usr\sap\PRD\D03\exe\dbmssslib.dll' is "640.00", patchlevel (0.126)
B New connection 0 created
M sysno 03
M sid PRD
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 129
M intno 20020600
M make: multithreaded, ASCII
M pid 2592
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2592) [dpxxdisp.c 1158]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 18216 (828)
M DpShMCreate: sizeof(tm_adm) 2379840 (11840)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (364)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 06030040, size: 2677040)
M DpShMCreate: allocated sys_adm at 06030040
M DpShMCreate: allocated wp_adm at 060317D0
M DpShMCreate: allocated tm_adm_list at 06035EF8
M DpShMCreate: allocated tm_adm at 06035F20
M DpShMCreate: allocated wp_ca_adm at 0627AF60
M DpShMCreate: allocated appc_ca_adm at 0627F5B0
M DpShMCreate: allocated comm_adm_list at 06280D20
M DpShMCreate: allocated comm_adm at 06280D38
M DpShMCreate: allocated vmc_adm_list at 062AFB38
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 062AFB60
M DpShMCreate: allocated wall_adm at 062AFB68
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Fri Mar 26 15:07:51 2010
M calling db_connect ...
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\PRD\D03\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 126
C patchcomment MSSQL: Unknown table in FOR ALL ENTRIES (945910)
C Network connection used from BASHFUL to kingdomdb using tcp:kingdomdb
C CopyLocalParameters: dbuser is 'prd'
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: MARS property was not set.
C
C Fri Mar 26 15:07:54 2010
C Provider Release:08.10.1830
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C
C Fri Mar 26 15:07:55 2010
C Cache sizes: header 52 bytes, 20000 names (26720000 bytes), 1000 dynamic statements (5432000 bytes), total 32152052 bytes
C Using shared procedure name cache KINGDOMDB_PRDPRD_PRD_MEM initialized by another process.
C Connected to db server : [kingdomdb] server_used : [tcp:kingdomdb], dbname: PRD, dbuser: prd
C pn_id:KINGDOMDB_PRDPRD_PRD
C Not using MARS (on sql 8.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20100326 150751 KINGDOMDB
C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Fri Mar 26 15:07:59 2010
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0A730040, size: 20000768)
M SHM_ROLL_AREA (addr: 61AF0040, size: 268435456)
M SHM_PAGING_AREA (addr: 103C0040, size: 134217728)
M SHM_ROLL_ADM (addr: 0BA50040, size: 2678942)
M SHM_PAGING_ADM (addr: 0BCE0040, size: 525344)
M ThCreateNoBuffer allocated 324144 bytes for 1000 entries at 0BD70040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 7424 bytes (50 server) at 0BDC0040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 22, CON_ID = -1
I *** ERROR => [CreateOsShm] CreateFileMapping(19,97656 KB) failed with Err=1450
ERROR_NO_SYSTEM_RESOURCES: Insufficient system resources exist to complete the requested service. [shmnt.c 2130]
I *** ERROR => ShmCreate: Create (19,99999904,1) failed [shmnt.c 469]
May i know why the dialog instance is down. And I dont know what should i do now. Need your advice.
Thank You
regards,
Anang78Hi,
Some memory parameter must have been changed, which results ERROR_NO_SYSTEM_RESOURCES Messages.
Backup the current DI Instance profile and rename old version of DI Profile (which is having .BAK extension).
Check the "TIME STAMP" when DI instance was working fine to select the backup version of the profile.
Then try again to start the DI Instance and post the log again.
Later you can analyse the system load and tune the parameters accordingly...
If requred, increase the Physical Memory.
Regards.
Rajesh Narkhede
Maybe you are looking for
-
PO Form attahcment Name in Email
Hello, we have a requirement whe PO get saved it will sent out an email attahcment with PDF format. we have an outputdevice as Email and Device type is PDF.This will send an attchment as PRINT DATA.PDF.Our Requirement to change the name of the attach
-
Flex 4.5.1 AIR application is not running on iPhone 3gs
I developed an iOS application in Flash builder 4.5 with flex 4.5.1 extension using AIR 2.6. This application is successfully installed on iPhone4G. When I tried to install it on iPhone 3GS it say, this application is not compatible with this iPhone.
-
Hi all, I have 2 materials (purchased items with proc type F) say A & B. A is assigned with MRP group 100 & B is assigend with MRP GRoup 200. PLanning horizon for group 100 (mtl A) is 3 months. and PLanning horizon for group 200 (mtl B) is 18 months.
-
My Pavilion G4 shuts down after a few minutes when I plug it in
My hp pavilion G4 shuts down automatically after a few minutes when I plug it in. It does not happen regularly so I'm not sure of the reason of why it happens. The laptop shuts down and when I press the power button, the light on the power button jus
-
HT2188 every time I plug the ipod into the computer itunes opens then quits unexpectedly
Every time i connect my ipod to the computer i tunes opens and then shuts down unexpectedly and almost immediately.The devise remain visible in the finder. This is the beginning of the error message. Can some one tell me how to fix the problem? Excep