Gateway registration of RFC program note 63930
Hello,
I'm trying to register a program as explained in note 63930. After running
rfcexec -atest -gHOST -xsapgw00, on the SAP server nothing happens. I still
can't see the registered program in SMGW->Logged on clients.
Are there any actions that I need to execute for the program to be registered ?
Please advice,
Dimitry Haritonov
I am caught with the same problem. I am trying to register a program which is running on another server. Unfortunately, I get the error message, 'Program not registered'. I performed the same steps as explained by Dimitry but, I am not seeing the entry for this program under the logged on clients under SMGW transaction.
I also read from the other thread answered to Dimitry's question. It was explained that when the rfcexec command is executed, the command will keep running until we manually terminate. But, in my case (similar to Dimitry), I don't see the command running. The command immediately terminates without any error message and prompts with the command prompt again. Yes, I had the problem with the "SERVER_EXEC" and once the problem was corrected as suggested in the other thread, "SERVER_EXEC" is working fine. But still, I don't see the entries under logged on clients under SMGW for this program.
Any suggestion in the right direction is highly appreciated.
Thank you.
Similar Messages
-
Getting error in XI"RFC Program Not Found"
Hi All,
I am getting error in SXMB_MONI "RFC Program not found via SAP XI".
So please suggest me what is the problem behind this..For these SAP XI and R/3 i made 3 to 4 RFC program but only 1 RFC program name not getting Via SAP XI.
Thanks
AmitHi,
I am calling RFC FM via SAP XI.
Main Records are coming from siebel and recevied by SAP XI and XI will do some changes in records and calling REC FM from SAP R/3.
Problem is siebel to xi records coming fine but xi to sap R/3 error message coming "Program not Found".
Thanks
Amit -
BOEDGE - SM59 Connection RFC = Program Not Registered
Hello,
I installed on a server Windows Server 2003 SP1 32bit:
- BO Edge 3.1 (BuildVersion = 12.1.0.914)
- Java Connector 2.1.9
- Integration Kit for SAP 3.1 SP3 (BuildVersion = 12.3.0.601)
I see on the CCM (Central Configuration Manager) my services correctly started:
Apache Tomcat -- Running
BW Publisher Service -- Running
Server Intelligence Agent -- Running
I installed on the BW server the transport order of BOBJ INTG for "BOBJ INTG for SAP XI 3.1 FixPack 3.1" (BuildVersion=12.3.1.684).
I created a RFC connection type TCP/IP and test my new connexion and I have a error message:
Connexion Erreur connexion
Détails err. Error when opening an RFC connection
Détails err. ERROR: program BW_PUBLISHING not registered
Détails err. LOCATION: SAP-Gateway on host myserver.com / sapgw10
Détails err. DETAIL: TP BW_PUBLISHING not registered
Détails err. COMPONENT: SAP-Gateway
Détails err. COUNTER: 51016
Détails err. MODULE: gwr3cpic.c
Détails err. LINE: 1812
Détails err. CODE RETOUR: 679
Détails err. SUBRC: 0
Détails err. RELEASE: 700
Détails err. TIME: Fri Sep -
Détails err. VERSION: 2
An idea?Hi,
In Central Management Console ie, Admin application of BOE, you need to configure the BW system. Use the below URL,
http://<serverhostname>:<port>/CmcApp
After logging in Select the Authentication and SAP as authentication type. Regarding how to configure, follow the configuration steps mentioned in the below article:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f
Once you import the roles with the above configuration, the user with which you are validating the RFC connection will be imported in the BOE.
Now, verify the RFC in the BW system.
Regards,
Noor. -
Idoc - XI - File scenario: R3 RFC Program Not Registered
I have been going through all of the outbound idoc guides and other forum messages, but still cannot figure out how to get my rfc registered. This is my SM58 error on R/3.
Connection error program SAPXI_IDOC not registered / CPI-C error CM_ALLOCATE_FAILURE_RETRY.
I have SM59, IDX1, and IDX2 set up on XI, but cannot get them registered. Is there some sort of activation or cache refresh I need to do?
More details-
(my R/3 system is RD0-120 and my XI system is XD0-110)
R/3 TCP RFC: SAPXI_IDOC
R/3 tRFC Port: SAPXI_IDOC
R/3 BD54: RD0120 and XD0110 are set up (wasn't sure which system)
XI SM59:RD0120 (tests ok)
XI IDX1:SAPRD0 (client of 120, RFC destination of RD0120)
XI IDX2:(SAPRD0 metadata, my 2 idoc types, and client 120)
ThanksHi Keith,
>>>R/3 TCP RFC: SAPXI_IDOC
why did you call tcpip connection IDOC?
you have to use R3 type connection
in order to send idocs to the XI
you don't need tcpip - so delete it and try again
Regards,
michal -
Error 'Program not registered' while testing RFC - SRM to MDM / TCP/IP conn
Hello All,
While testing RFC connection in SRM, we are getting this error. This connection between SRM to MDM. Any inputs will be highly appreciated.
Error Details LOCATION: SAP-Gateway on host <hostname> / sapgw<instance no>
our server OS : windows 2008 server
We are getting error while doing connection test in SRM.
This is sm59 connection (TCP/IP ) connection.
Connection Type: T / RFC destination Name: MDM_API_CATALOG
Registered server program: hostname.MDS
I checked smgw transaction ..Logged on clients...Program id is not showing. Any hint will be helpful.
I Checked this MDM setup also.
MDS setup
In mdm server go to folder F:\usr\sap\DM1\MDS00\config
Open MDM.ini file in notepad
Add the below 2 entries.
SAP RFC Gateways= GWHOST=XXXX.hostnamexxx.xxx GWSERV=sapgw00
Trusted SAP Systems= XXD
This will enable gateway connection between SRM and MDM and will enable trusted connection.
For trusted connections to work, we created a service user called SRM_MDM_API with SAP_ALL in SRM and also created the same user in MDM with Default role.
Error message:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program XXXXXXXXPRD.MDS not registered
Error Details LOCATION: SAP-Gateway on host XXXXXXXXprd.xx.xxxxxxhostname.xxx / sapgw00
Error Details DETAIL: TP XXXXXXXXPRD.MDS not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 77326
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1778
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME:
Error Details VERSION: 2
Procedure Tried
1) This procedure is for Linux OS - Similarly we tried in Windows OS ( If any procedure is wrong also, Please correct us)
To register the program login into the OS level as sudo su u2013 <sid>adm and execute the following command.
rfcexec u2013g<program id> -a<gateway host name> -x<gateway service>
rfcexec is the server program name, the <program id> can be obtained from SM59, it is case sensitive and should match with the entry in SM59. The <gateway host name> and <gateway service> can be obtained from the transaction SMGW. When this command is executed it goes to a hanging loop.
The connection will fail once this command is terminated or the user executing this command logs off
2)
To avoid this, instead of using the above mentioned command an entry should be made in the file saprfc.ini
To do this, execute the following command
sudo su u2013 <sid>adm
rfcexec u2013D<destination name>
<destination name> is the RFC destination name in SM59
In order to do above step 2, we could not find saprfc.ini in windows 2008 server. Please let us know path where it will be usually?
3) Already checked the notes sapnote_0000684841
I know that it is generic error..This is happening to specific one of system only.
Thanks
Edited by: saptest2011 on May 20, 2011 5:36 PMHello SM,
Thanks for your quick reply.
Thanks for sharing link for document ie Configure the MDM Administration_cockpit. It is helpful. I read that document.
But still issue remain there.
The same RFC connection works between SRM sandbox to MDM sandbox.
Only issue with SRM Prod to MDM Prod (newly built system)
difference between MDM Prod and MDM sandbox.
MDM Prod runs: Windows server 2008 OS
MDM Sandbox runs: Windows server 2003 OS
Landscape: PI7.1, MDM 7.1 and SRM 5.5, SRM-MDM Catalog 3.0
Even i did os01 tcode ping test using host name (specific IP address) from SRM prod to MDM prod, it is fine.
Thanks a lot for your help.
I checked these notes also
Note 353597 - Registering a server program
Note 44844 - No connection to registered RFC program
Note: in smgw tcode in SRM system, the required program id is not showing in logged on clients
Thanks
Edited by: saptest2011 on May 23, 2011 5:00 PM
Edited by: saptest2011 on May 23, 2011 5:39 PM -
Gateway error - Program not registered
Hello,
We were getting the following error while doing a "Connection test" of a TCP/IP RFC destination:
LOCATION SAP-Gateway on host gisrxx / sapgw00
ERROR program SBCX not registered
It's an ECC 6.0 system.
I found SAP note - - 353597 - Registering a RFC program
I executed the following command as sidadm
rfcexec -aSBCX -ggisrxx -xsapgw00
But the command keeps on running on teh command prompt.
And for that duration the RFC works.
But after sometime the command ends and comes back to command prompt and the RFC doesn't work any more.
Could you tell what needs to be done to resolve this issue?
Regards,
Gautam.Hi Gautam,
Please run the program in background (Unix) or as a service (Windows).
Please go through the following forum post. This should help.
Run rfcexec as service on windows
Br,
Venky -
RFC Error: Program not registered
Hi,
We are presently facing issue with our GTS (Quality) and Seeburger system RFC connection. While doing the testing we are getting error as below:
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: RSRFCPIN (Transaction: SM59)
User: TESTUSER (Client: 202)
Destination: SEEBURGER_RFC (handle: 2, , )
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =SEEBURGER_RFC
HOST =%%RFCSERVER%%
PROG =BIS_ABC_202_DEV
GWHOST =ABC.XYZ.STU.com
GWSERV =sapgw15
I have checked RFC connection is fine. Also production systems connection are working fine.
Can anyone please help me out where to look in GTS or Seeburger to check about this issue and correct it.
Thanks & Regards,
ManishHi Sunny,
Thank you for your suggestion, actually we have tried registration using rfcexec and it works fine.
BTW, we have managed to solve this issue by de-activate the IDoc receive & send modules of websap component and activate them again.
Thanks and Regards,
Nick -
RFC error: transaction program not registered
Hi gurus,
I am facing one issue with RFC connection.
I am creating one TCP/IP connection from ECC 6.0 (windows 2003) to EHS/WWI application. i am getting following error when i am doing connection test.
error: Program <PROGRAM ID> not registered.
Then i tried to register the program by running the following command at OS level.
rfcexec u2013a program_ID u2013g ######id u2013x sapgw00
But still the error persists.
Please guide me. also does this command creates entry in saprfc.ini file? i have tried adding it manually in that file also.I think you need change Activation Type Radiobutton.
I believe that you have checked "Registered Server Program", and with this flag you have to identify a registered RFC program. With an SAP gateway, an RFC server program can be registered under this ID and then wait for RFC calls from different SAP Systems.
Type T destinations are connections to external programs that use the RFC API to receive RFCs.
If it is Start, you must specify the host name and the pathname of the program to be started. -
There is a RFC connection not working connection test fails.
I found out the RFC is using a a program id that is not registerd.
When I register the program on os level like rfcexec -r -a <program_id> -g <hostname> -x <sapgw> the connection test on the rfc works.
The problem with the rfcexec is that it just works as long as the os session is active.
From what I´ve read I need to configure this on java side in the web dynpro content administrator.
Can you help me with that ? When I try to click Create jco destination I get an error.Hello Vioar,
rfcexec is only a standard program for testing, you sould not register it for your application on the gateway.
Since you are getting "User is not allowed to read any data..." - did you logon with the correct user? Does this user have enough authorizations?
Regards,
Alwina -
CPIC-CALL Transaction program not registered Error while creating RFC Desti
Hi All,
I am trying to create a new RFC Destination.
Details I have provided are..
1.RFC Destination Name
2.Connection Type - TCP/IP
3.Description
4. Activation Type - Registered Server Program.
5.Program Id.
6. Gateway Host and Gateway Service.
But When I Test the connection, I am getting the following error.
<b>" program xyz not registered / CPIC-CALL: 'ThSAPECMINIT'# Transaction program not registered"</b>
However I was able to create and connect RFC Destinations successfully previously.
I am not SAP guy. Could someone help resolve this issue.
Thanks,
Phanihi Sekhar,
I request you to please help me out in this issue. I am getting similar kind of problem. I am trying to replicate the customer from CRM to R/3 and i get a bdoc message in SMW01 that "RFC connection failed please press the save button again". When the basis team further investigated they came up with the below error..
User: CRREMOTE (Client: 071)
Destination: OCR (handle: 1, , )
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1462
CPIC-CALL: 'ThSAPECMINIT'
Transaction program not registered
DEST =OCR
HOST =%%RFCSERVER%%
PROG =dpssrfc
Trace file opened at 20061121 140451 EST SAP-REL 640,0,109 RFC-VER
3 804778
resize I/O buffer to 28000 bytes
>>>> [2] MQ_LINK : TCP <ac: 3> K %%RFCSERVER%% >>> OPEN
{45632F14-288E-0046-0000-0000A888A7AA}-
======> CPIC-CALL: 'ThSAPECMINIT'
can you please tell me where can be probelm. Regarding your message, where can i get the communication channel to assign the program id.
Awaiting your reply,
Thanks & Regards,
Yogesh -
RFC : Transaction Program not Registered
Hi Folks,
We have registered the server program from the middleware onto SAP R/3 System and is successfully registered as per the logs. As a next step, we have logged into R/3 System, SM59, in the RFC destination (Type TCP/IP) after specifying the registered program, we have tested it(Connectivity test). The test is positive and connectivity is established successfully.
The solution was working for months and suddenly connectivity is broken.
To restore the connection, we have repeated the steps, registered the server program, tested and everything is fine.
But when we have pushed a new message, then onwards the RFC destination shows an error. "TP is not registered", Return Code 679. That is when the first message is pushed, it is de-registering the server program and running into error. All the messages got stuck in SM58 with status 'Error when opening an RFC connection'.
RFC trace shows
ERVER> Caller transaction code: (Caller Program: SAPLQOWK)
ERVER> Called function module: ARFC_RUN_NOWAIT
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered.
Please let me know for any inputs.
Thanks, SurajMy problem got solved. In the middleware, when TRFC connection is made, it has created a lock entry during the time, system was brought down for maintenance activity. When the system is brought up, then as the connection lock entry is available, then it deregistered the server program and not able to establish further connection.
To resolve the issue, we have just deleted lock file and registered server program from middleware. This time the connection was established successfully and could able to restore the message flow.
Thanks, Suraj -
SAP SM59 Connection - Program Not Registered
I created the SM59 in the SAP system and did the basic install using the BO Integration Kit XI release 2 on a Windows system.
On the test using the SM59 I am getting:
ERROR: program AERSND02_BO_SB2 not registered.
AERSND02_BO_SB2 is the program ID I used in the BO install and is the program ID I used in the Registered Server Program in the SM59. The SAP system is a unix box and the BO system is on a different windows box.
Also, When I execute the rfc_ping se37 program I get "Communication Failure".
In the BO system tab "SAP" I can see the roles in my SAP system so the connection to the SAP system is functioning.
Points awarded.
MikeMuhammad, its helpful.
Trying to configure BW Publisher.
I verified that:
1) BW Publisher has been started in windows.
2) I executed netstat u2013an | find u201C3306u201D and see valid responses:
xxx.x.xx.xx:2940 xxx.x.xx.xy:3306 ESTABLISHED
xxx.x.xx.xx:3354 xxx.x.xx.xy:3306 ESTABLISHED
This was promising!!
3) My sm59 has valid values per the doc
4) My sm59 gives me the following error response:
ERROR: program mybox02_BO_XX2 not registered
LOCATION: SAP-Gateway on host aersnd02.dcs.eis.lmco.com / sapgw06
DETAIL: TP mybox02_BO_XX2 not registered
5) The following link http://help.sap.com/saphelp_nw70/helpdata/EN/22/042652488911d189490000e829fbbd/frameset.htm shows:
Activation Type Registration
If the activation type is Registration, you have to identify a registered RFC program. With an SAP gateway, you can register an RFC server program under this ID and then wait for RFC calls from other SAP Systems.
Example entry name: SERVER_EXEC
6) When I run sapinfo.exe dest=bin I get:
SAP System Information
Destination mybox01
Host mybox01
System ID (extern)
Database
DB host
DB system
SAP release 640
SAP kernel release 640
RFC Protokoll 011
Characters 1100 (NON UNICODE PCS=1)
Integers LIT
Floating P. IE3
SAP machine id 560
Timezone
When I ran this sapinfo.exe to get the connection registered (using type=R) you can see that it did not get registered.
Since the sap system is on unix and bo on windows I'm thinking that I need something on my sap system box pointing back to bo.
Anyone been here b4? Points rewarded !!
Edited by: Michael Hill on Jun 6, 2008 9:16 PM -
Help with error program not registered CPI-C error CM_ALLOCATE_FAILURE_RETR
I have the following connection error in SM59 ...
Connection error program ZCCCOM_NZ_PMH01 not registered / CPI-C error CM_ALLOCATE_FAILURE_RETRY.
I have deleted and re-registered the program but still no connection. Any ideas as to what/where I am going wrong would be fantastic!!
RFC Destin = CCCOM
Type = T
Gateway Host = ntchsapqas
Gateway service = sapgw00
ERROR program ZCCCOM_NZ_PMH01 not registered
LOCATION SAP-Gateway on host ntchsapqas / sapgw00
DETAIL TP ZCCCOM_NZ_PMH01 not registered
COMPONENT SAP-Gateway
COUNTER 19364
MODULE gwr3cpic.c
LINE 1593
RETURN CODE 679
SUBRC 0
RELEASE 46D
TIME Tue Jun 10 14:47:28 2008
VERSION 2Something helpful related to this
The program in the above error should be registered in the gateway for this connection test to complete successfully. The server program rfcexec is responsible for its registration on the gateway.
To register the program login into the OS level as sudo su - <sid>adm and execute the following command.
rfcexec u2013g<program id> -a<gateway host name> -x<gateway service>
rfcexec is the server program name, the <program id> can be obtained from SM59, it is case sensitive and should match with the entry in SM59. The <gateway host name> and <gateway service> can be obtained from the transaction SMGW. When this command is executed it goes to a hanging loop.
The connection will fail once this command is terminated or the user executing this command logs off
To avoid this, instead of using the above mentioned command an entry should be made in the file saprfc.ini
To do this, execute the following command
sudo su - <sid>adm
rfcexec u2013D<destination name>
<destination name> is the RFC destination name in SM59
So now we are done with registering the server program, but how do we check it is registered, once a server program is registered it is displayed in the Logged on clients in SMGW.
In transaction SMGW choose GOTO-> Logged on clients. There should be an entry for the server program in the screen that is displayed with system type Registered_TP (which indicates that the program is registered) -
Mapping Runtime with multiple gateway registration
I need a help about increase mapping performance.
I have add new Java server on new server(I mean HW).
I wonder if ABAP(I mean RFC Gateway with JCo) can recognize this "New" Java server.
I reference following...
http://help.sap.com/saphelp_nw04/helpdata/en/1c/ba295ee20fcd41b6804f1bc602de68/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/sap exchange infrastructure tuning guide xi 3.0.pdf
-->See section "Mapping Runtime"
I have a following XI3.0 system.
EOne central Instance(ABAP and Java) on one server(HW).
Java have one J2EE Dispatcher and one Server.
EOne dialog Instance(ABAP and Java) on one server(HW)
Java have one J2EE Dispatcher and one Server.
So "Java" have two Server processes on each hardware.
You know when mapping, ABAP connect to Java with JCo.
In ABAP side, I defined as AI_RUNTIME_JCO_SERVER(SM59).
In Java side, I defined as AI_RUNTIME_XI1(visual admin)
They have set same "Program ID" and test connection well.
Now I add new Java server node.
I can see "New" Java server tree in visual administrator.
Can I defined RFC Destination "AI_RUNTIME_XI1" to this New one? (This is same destination.)
Tunning Guide said, "load distribution by multiple gateway registration".
What's mean?? I have only one Gayteway(I mean AI_RUNTIME_JCOSERVER)...
Help.sap.com said, "The RFC Engine service can register under one name to one particular gateway. To register to another gateway, another name has to be used. ".
What's mean?? Can XI ABAP Gateway recognize "another name"?
I confuse a bit...
regards,Hi All,
In addition to the above, if mapping is tested within ESR there is no issue. The problem is happening only during runtime.
BTW, When we applied the note 1838921 we upgraded the Adapter Framework from SP09 to SP12.
Could this be an issue?
Regards,
Sudheer -
TREX7.1 - Program not registered
Hi to all experts,
I am implementing TREX7.1 revision 36 (latest) which is standalone, but I encountered the error - program not registered while creating the RFC connection in admin tool. Previously the connection was working but it happens when I switched the RFCSERVER to "single thread (all hosts), deleted the old RFC connection and recreate the new one.
I have tried the following methods:
1. removed TREX and reinstall it again.
2. executed rfcexec u2013g<program id> -a<gateway host name> -x<gateway service> (it seems like nothing has been changed) - I registered it in SAP server, am I correct?
Thanks in advance.
BR,
NancyHi to all experts,
Problem solved once i restarted the SAP server and recreated the RFC connection in TREX server.
Another issue now, when i run the "python runInstallationTest.py", error occurs as below:
--> Check 01: Ping TREX Services
++----
++----
++----
STEP ³³ ACTION ³³ SPECIFICATION ³³ RESULT
++----
++----
++----
++----
++----
++----
Traceback (most recent call last):
File "/usr/sap/TX1/TRX01/exe/python_support/testbase.py", line 709, in run
ret = self.runHandler(*rest, **self.extractInheritedArgs(keys))
File "runInstallationTest.py", line 710, in runHandler
TREX_SHOW_STOPPER, webserver_unreachable, IS_QUEUE_SERVER = ps.ping()
File "runInstallationTest.py", line 275, in ping
services = HostPort4Services().getHostPort4Services()
File "runInstallationTest.py", line 88, in __init__
self.srvs = Services().getServices()
File "runInstallationTest.py", line 69, in getServices
content = Content('TREXDaemon.ini')
File "runInstallationTest.py", line 33, in __init__
self.content = self.getContent()
File "runInstallationTest.py", line 42, in getContent
raise RETURN_CODE(2, msg=msg)
RETURN_CODE: RC_NO_SETTINGS
No SAP_RETRIEVAL_PATH set in environment.
---> TEST ABORTED !!!
Is this test run very important? Any idea what is this problem about?
Many thanks in advance!
BR,
Nancy
Maybe you are looking for
-
I have an early 2008 and mid 2010 13 inch macbook pro running iTunes 10.7. Itunes on both machines doesn't recognize blank cds or allow me to import from a music cd when I insert it.
-
HP Officejet Pro 8500 A909a Series email address to print from an ipad
Where do I find the email address for my HP Officejet Pro 8500 A909a Series so I can use my new HP app on my ipad for printing from my ipad to my printer? Tina This question was solved. View Solution.
-
I cannot Disable a constraint in SQL Developer
Here is my issue: I have created a table already named practice1. Using SQL Developer PL/SQL try to run a loop as following: DECLARE COUNTER1 NUMBER(2); BEGIN COUNTER1 := 30; ALTER TABLE practice1 DISABLE CONSTRAINT PRK1; LOOP COUNTER1 := 30; INSER
-
Hi, The problem that I am having is that I took all of the necessary files in order to run a project and moved it to a different computer. When I open Veristand, and try to configure the project, a pop up window comes up with "Search for Dependent Fi
-
I've just installed JDeveloper and when I try to run any XSQL Page (i've tried about 10 different ones) I get this same trace with the same File Not Found error at the end. I'm sure it's some kind of configuration problem, but I don't where to fix th