Gateway

- Is it allow to set more than one gateway in one GW system ?
- To change domains from indirect to Gateway by Link Configuration, is it as easy as this ?
- After changed as Gateways, select one of the new Gateway on GW system Operation - Internet Addressing - internet agent for outbound SMTP/MIME messages. Then on all other domains , select Override - select Alternate Internet Agent for outbound SMTP/MIME messages, to put the second Gateway. Is that how to set default and alternate agent for outbound messages ?

muiyee,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

Error while installing gateway please help soon

Error while installing gateway in
Microsoft Windows Server 2003.
error while installing gateway
E:\idm\gateway>gateway -i
10/02/2008 15.13.38.015000 [4972] (../../../../src/wps/agent/logging/WSTrace.cpp
,150): trace active, level: 4, file: E:\\IDMLOGS\\gateway.log, maxSize: 10240 KB
10/02/2008 15.13.38.015000 [4972] (../../../../src/wps/agent/logging/WSTrace.cpp
,108): In WSTrace::init()
10/02/2008 15.13.38.015000 [4972] (../../../../src/wps/agent/logging/WSTrace.cpp
,109): Gateway version: 'Sun Java System Identity Manager 7.1'
10/02/2008 15.13.38.015000 [4972] (../../../../src/wps/agent/logging/WSTrace.cpp
,110): OS version: 'Windows Server 2003 Family Service Pack 1 (Build 3790)'
An error occured when trying to install the service: No error
E:\idm\gateway>

Use that MS installer cleanup to get rid of iTunes first, then QuickTime.
Actually, I should back up. Go to the article I link below, and scroll down to the section
*General Installation Troubleshooting*
Important: A majority of customers experience successful iTunes installation after completing these troubleshooting procedures. If one does not help, proceed to the next.
-Completely Remove iTunes and QuickTime (Click to show)
-Empty your Temp directory and restart (Click for more)
-Clean up iTunes installer files on the computer (Click for more)
-Download QuickTime Standalone Installer (Click for more)
-Disable other conflicting software (Click for more)
-Make sure your folder names don't contain strange characters (Click for more)
http://docs.info.apple.com/article.html?artnum=93976

ASA default gateway

Estou montando um novo projeto de rede onde quero que o meu Switch de layer 3 seja o gateway da rede e o ASA o GATEWAY deste SWITCH. Hoje o ASA é o gateway da rede e tem 3 vlas criadas em interfaces virtuas.
O problema é o seguinte quando crio as novas Vlans no switch não consigo ter comunicação entre as Vlans antigas que já estão configuradas no ASA mesmo criando ACL no ASA. quando pingo de um PC na nova VLAN para um PC que esta na VLAn já criada no ASA o pacote até chega no ASA mas recebo a seguinte mensagem "an ICMP session is removed in the fast-path when stateful ICMP is enabled using the inspect icmp command."
Alguem já passou pro esse problema? quem poder ajudar agradeço muito.
Obrigado!
Vagner

Ola Vagner,
Nois podemos ter a configuração do ASA?
Mike

Multiple gateways for different Traffic on ASA 5510 firewall

Hello,
My network atthe moment is set up as:
WAN, with three sites
Site 1
Site 2
Site 3
Site 1 is behind a non-Cisco firewall, which is connected to the internet via a Frame Relay link (using a Cisco 1721 router). We host a number of servers on the Internal network and DMZ's.
All sites connect to the WAN using Cisco routers or switches.
All internet traffic (IN and OUT) for all sites goes via the non-Cisco firewall.
I am interested in the ASA 5510 with six interfaces.
Using the ASA 5510 is it possible to set up two (2) internet connections, one via the Frame Relay and a second internet connection via an ADSL connection?
Then, is it possible to direct the outward-bound traffic via specific gateways based upon either:
(a) the type of traffic, say HTTP from users behind the firewall; or
(b) the IP addresses of the host (i.e. users' PC versus the servers)
Any assistance is welcome.
Kind regards,
IT@C

yes you can do this with policy routing on the internet router in front of the firewall assuming that you are connecting both ISPs to that router. Also, remember that you can do vlans on the ASA. This may cut down on the # of interfaces that you use in your config.
http://www.cisco.com/en/US/customer/products/ps6120/products_configuration_guide_chapter09186a0080636f89.html
HTH, pls rate!

Unable to access the data from Data Management Gateway: Query timeout expired

Hi,
Since 2-3 days the data refresh is failing on our PowerBI site. I checked below:
1. The gateway is in running status.
2. Data source is also in ready status and test connection worked fine too.
3. Below is the error in System Health -
Failed to refresh the data source. An internal service error has occurred. Retry the operation at a later time. If the problem persists, contact Microsoft support for further assistance.
Error code: 4025
4. Below is the error in Event Viewer.
Unable to access the data from Data Management Gateway: Query timeout expired. Please check 1) whether the data source is available 2) whether the gateway on-premises service is running using Windows Event Logs.
5. This is the correlational id for latest refresh failure
is
f9030dd8-af4c-4225-8674-50ce85a770d0
6.
Refresh History error is –
Errors in the high-level relational engine. The following exception occurred while the managed IDataReader interface was being used: The operation has timed out. Errors in the high-level relational engine. The following exception occurred while the
managed IDataReader interface was being used: Query timeout expired.
Any idea what could have went wrong suddenly, everything was working fine from last 1 month.
Thanks,
Richa

Never mind, figured out there was a lock on SQL table which caused all the problems. Once I released the lock it PowerPivot refresh started working fine.
Thanks.

Unable to refresh SQL Server data source through Data Management Gateway

I just installed the version 1.1.5226.8 of Data Management Gateway and tried to refresh a simple query on a table connected to SQL Server, with no transformations in Power Query.
This is the error I obtain:
Errors in the high-level relational engine. The following exception occurred while the managed IDataReader interface was being used: transfer service job status is invalid.
I am wondering whether my Power BI is still not updated to handle such a connection type, or there could be something else not working?
I correctly created the data source in admin panel following instructions in Release Notes, and
test Power Query connection is ok.
Marco Russo http://www.sqlbi.com http://www.powerpivotworkshop.com http://sqlblog.com/blogs/marco_russo

I made other tests and I found important information (maybe there is a bug, but read the following).
The functions DateTime.LocalNow and DateTime.FixedLocalNow
work correctly, generating these statements to SQL Server:
    convert(datetime2, '2014-05-03 06:37:52.1135108') as [LocalNow],
    convert(datetime2, '2014-05-03 06:37:52.0525061') as [FixedLocalNow],
The functions DateTimeZone.FixedLocalNow, DateTimeZone.FixedUtcNow,
DateTimeZone.LocalNow, and DateTimeZone.UtcNow
stop the scheduled refresh with the error I mentioned
in my previous messages, generating these statements to SQL Server:
    '2014-05-03 06:37:52.0525061+02:00' as [TZFixedLocalNow],
    '2014-05-03 04:37:52.0525061+00:00' as [TZFixedUtcNow],
    '2014-05-03 06:37:52.1135108+02:00' as [TZLocalNow],
    '2014-05-03 04:37:52.1135108+00:00' as [TZUtcNow]
I solved the issue by placing the DateTimeZone calls after a Table.Buffer call, so query folding does not translate in SQL these functions. However, it seems like something to fix.
Marco Russo http://www.sqlbi.com http://www.powerpivotworkshop.com http://sqlblog.com/blogs/marco_russo

Using Oracle ODBC Gateway connecting to a remote Oracle database

Oracle 11gR2
RHEL 6.4
Has anyone use the Oracle ODBC Gateway to connect to another Oracle database? Any issues with that configuration? Where do I get the ODBC drivers for Linux?
(I know, "why not use a dblink?" -- well that would be against company security policies)

Hi,
From the Oracle point of view we support using DG4ODBC for Oracle to Oracle connections. However, we have not actually tested it as DG4ODBC is primarily designed for access to non-Oracle databases.
How DG4ODBC will work between Oracle databases depends on the ODBC driver and what that supports. You will need an ODBC Oracle driver which you can get from various suppliers including Oracle but also vendors such as DataDirect, Easysoft etc. You could try a Google search.
You say you do not want to use database links but that is how DG4ODBC is used, You cannot do -
sqlplus user/password@dg4odbc_oracle
Once Dg4ODBC is setup and configured as in this note - if you are using Linux 64-bit -
How to Configure DG4ODBC on 64bit Unix OS (Linux, Solaris, AIX, HP-UX Itanium) to Connect to Non-Oracle Databases Post Install (Doc ID 561033.1)
then in the Oracle database you create a database link and select from tables in the other Oracle database -
select * from table@dg4odbc_db_link ;
Regards,
Mike

Gateway FX and Blue Screen of Death

Computer:
Gateway FX 7024
GeForce 8800GT 512 mb
Problem:
I've had the computer for 1 1/2 years with very few problems. Recently, the screen will lock up solid and be illegible with "static" lines all the way down the monitor. Sometimes before the screen locks up, it will flip to the blue screen of death, say it's dumping physical memory, and then lock up. Only thing I can do is restart, but it will do it again at random lengths of time. Happens more while I'm playing games than anything else. Sounds to me like the graphics card has gone Tango Uniform, but a computer guru, I am not. Any ideas?
What I've done so far:
I have checked for updated drivers and installed them.... no fix. I rolled back the drivers.... no fix. I have visually checked fans on power supply and graphics card to make sure they are working and they are fine. The fan on the motherboard spins, but doesn't appear to be moving overly fast. I checked BIOS and everything looks around what it should be for temp settings. In the "problems and solutions" application, it shows a video hardware error.
The only thing i did notice was there is only a 400W power supply installed and from the posts I've read, the 8800GT graphics card should have a 700-900W power supply. However... I've never had problems with it before. Could this cause the problem after 1 1/2 years?
help... i'm shaking from game withdrawals

Visited a company IT department today and an engineer looked at the AT&T Net Client settings. It now works - this may have been the "fix" for those in a similar predicament (all in the AT&T Net Client):
1. Click "Settings".
2. Click "Show the login properties window".
3. Click "Configure".
4. Click "Next".
5. Select the "Both the internet and my company's intranet" radio button.
6. Select "Managed VPN - SSL DualAccess" from the dropdown.
7. Click "Finish".
Cheers,
- Pete

Sap-nw:3300 not reached error in gateway

Dear experts,
I am facing a strange problem after a successful installation of netweaver Java+abap.
when i start the server i found this error
**** ERROR file opened at 20100131 114242 Arab Standard T, SAP-REL 700,0,113 RFC-VER 3 911150 MT-SL
T:2844 Error in program 'igsmux': ======> CPIC-CALL: 'SAP_CMNOREGTP'
LOCATION    CPIC (TCP/IP) on local host
ERROR       partner 'sap-nw:3300' not reached
TIME        Sun Jan 31 11:42:42 2010
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2770
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER     1
i ignore the error and i tried to login
after successful login to the portal server when i access the user administration tab. the explorer show
SAP WebAS Engine is starting...
If this state does not change within a few minutes,
please contact your system administrator.
Check the recommendations in SAP Notes: 943498, 764417
Message: Dispatcher running but no server connected!
and the server turns to yellow again when it turns to green again
i checked dev_rd
Sun Jan 31 13:11:15 2010
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 9 / sock 268
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1205) [nixxi.cpp    4424]
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 6 / sock 304
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1148) [nixxi.cpp    4424]
***LOG S23=> GwIDisconnectClient, client disconnected (006) [gwxxrd.c     11592]
***LOG S74=> GwIDisconnectClient, client disconnected ( sap-nw) [gwxxrd.c     11603]
***LOG S0R=> GwIDisconnectClient, client disconnected () [gwxxrd.c     11638]
***LOG S0I=> GwIDisconnectClient, client disconnected ( jlaunch) [gwxxrd.c     11651]
* LOCATION    SAP-Gateway on host sap-nw / sapgw00
* ERROR       connection to partner 'sap-nw:1148' broken
* TIME        Sun Jan 31 13:11:15 2010
* RELEASE     700
* COMPONENT   NI (network interface)
* VERSION     38
* RC          -6
* MODULE      nixxi.cpp
* LINE        4424
* DETAIL      NiIRead
* SYSTEM CALL recv
* ERRNO       10054
* ERRNO TEXT WSAECONNRESET: Connection reset by peer
* COUNTER     232
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 10 / sock 256
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1206) [nixxi.cpp    4424]
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 11 / sock 244
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1208) [nixxi.cpp    4424]
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 12 / sock 232
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1207) [nixxi.cpp    4424]
then i try to login again with the browser it give me
Portal Runtime Error
An exception occurred while processing your request
Exception id: 01:27_31/01/10_6192950
See the details for the exception ID in the log file.
any help would be appreciated
<br>
i also wanted to add that telnet 3300 works fine ping to host name is ok
my os win2003 sap 2004s sr3
Edited by: ebrahime on Jan 31, 2010 11:37 AM

thanks for your reply. i wanted to add 2 thing after the installation the password i entered in installation was not working for all the super users that is why i had to delete SAP* from database and change the j2ee_Admin password.
you mentioned that the java stack is unable to communicate with abap stack but i can login to portal by j2ee_admin user. but when i go to identity management then it give the error i gave you earlier.
any way the dev_w0 file contents is bellow
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
B
B Tue Feb 02 10:23:01 2010
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\ENP\DVEBMGS00\exe\dbdb6slib.dll' ...
B Library 'F:\usr\sap\ENP\DVEBMGS00\exe\dbdb6slib.dll' loaded
B Version of 'F:\usr\sap\ENP\DVEBMGS00\exe\dbdb6slib.dll' is "700.08", patchlevel (0.144)
C DbSl trace SM50: switch request to level 1
B New connection 0 created
M sysno      00
M sid        ENP
M systemid   562 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    144
M intno      20050900
M make:      multithreaded, Unicode, 64 bit, optimized
M pid        1604
M
M kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1604) [dpxxdisp.c   1305]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm)          25168     (1480)
M DpShMCreate: sizeof(tm_adm)          5652128     (28120)
M DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
M DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm)          552080     (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm)          0     (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)          0     (72)
M DpShMCreate: sizeof(vmc_adm)          0     (1864)
M DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm)     48
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 0000000010E70050, size: 6348592)
M DpShMCreate: allocated sys_adm at 0000000010E70050
M DpShMCreate: allocated wp_adm at 0000000010E72150
M DpShMCreate: allocated tm_adm_list at 0000000010E783A0
M DpShMCreate: allocated tm_adm at 0000000010E78400
M DpShMCreate: allocated wp_ca_adm at 00000000113DC2A0
M DpShMCreate: allocated appc_ca_adm at 00000000113E2060
M DpShMCreate: allocated comm_adm at 00000000113E3FA0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000001146AC30
M DpShMCreate: allocated gw_adm at 000000001146ACB0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000001146ACE0
M DpShMCreate: allocated wall_adm at 000000001146ACF0
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Tue Feb 02 10:23:02 2010
M ThInit: running on host ENP
M
M Tue Feb 02 10:23:03 2010
M calling db_connect ...
C Registering callback for dynamic profile parameters
C DB2 library successfully loaded DB2 library 'F:\usr\sap\ENP\DVEBMGS00\exe/db6_clidriver\bin\db2app64.dll' successfully loaded
C
C DB6 (DB2 UDB) UNICODE database interface 700.08 [opt]
C
C DB6 shared library (dbdb6slib) patchlevels
C    (0.8) DB6: V8.2.2 optguidelines in OPEN SQL (note 150037)
C    (0.8) Support of SDBUPDEXCL (note 847616)
C    (0.9) DB6: use export file for dbdb6slib (note 835135)
C    (0.9) DB6: Core in getAndBindSQLDA (note 833183)
C    (0.10) DB6: link dbdb6slib.dll on windows with libdb6.obj (note 761159)
C    (0.10) DB6: DUPLICATE_KEY on MERGE -> repeat (note 851474)
C    (0.15) DB6: wrong CAST for short string ABAP type (note 861905)
C    (0.17) DB6: special characters in sidadm passwd (note 865839)
C    (0.21) DB6: no SAP_INFO comments (note 873889)
C    (0.22) DB6: hints: get correlation names from view texts (note 868888)
C    (0.23) DB6: hints: get correlation names from view texts (note 868888)
C    (0.26) DB6: DB6_DBSL_CLP_COMMAND STRING_BAD_REF (note 883402)
C    (0.27) DB6: activate value compression (note 886231)
C    (0.28) DB6: optimization guidelines on views part 2 (note 868888)
C    (0.30) DB6: no SQL trace for SQLCancel (note 892111)
C    (0.33) DB6: append SAP_TA comment (note 873889)
C    (0.34) DB6: activate value compression with quoted names (note 886231)
C    (0.36) DB6: Repeat isolated DDL statements after SQL0911 (note 901338)
C    (0.41) DB6: add V9 to list of supported DB2 releases (note 912386)
C    (0.50) DB6: reread passwords for secondary connections (note 931742)
C    (0.52) DB6: double quote table names in optguidelines (note 868888)
C    (0.54) DB6: error handling in DBSL CLP (note 940260)
C    (0.69) DB6: technical support of DB2 CLI driver (note 962892)
C    (0.73) DB6: log table name on TRUNCATE failure (note 970743)
C    (0.79) DB6: column type XML in index size calculation (note 982993)
C    (0.82) DB6: CAST for SSTRING data types (note 989568)
C    (0.86) DB6: long runtimes for R3szchk (note 1000847)
C    (0.88) DB6: patch collection Dec 06 (note 1005574)
C    (0.96) DB6: patch collection Jan 07 (note 1017852)
C    (0.97) DB6: CLP commands with DB2 CLI Driver (note 1024102)
C    (0.99) DB6: SUBSTITUTE VALUES with FAE statements (note 1028779)
C    (0.107) DB6: patch collection Apr 07 (note 1047194)
C    (0.110) DB6: SAP user names ending with non-ASCII char (note 1054555)
C    (0.113) DB6: work process type in application snapshot (note 1059905)
C    (0.114) DB6: connect using SAPDBHOST and DB2DB6_SVCENAME (note 1062049)
C    (0.117) DB6: patch for execution of long DDL statements (note 1069658)
C    (0.122) DB6: SNAPSHOT_TBS_CFG table function is deprecated (note 1077963)
C    (0.123) DB6: CLP commands on Windows with V9.1 (note 1080149)
C    (0.124) DB6: Set DB2CODEPAGE=819 for non-Unicode (note 1084400)
C    (0.126) DB6: reuse optguidelines on FAE statements (note 1087375)
C    (0.126) DB6: Enforce DB2CODEPAGE=819 for non-Unicode environments (note 1084400)
C    (0.128) DB6: db6_free on invalid memory area (note 1092030)
C    (0.133) DB6: statement cache enhancements (note 1101031)
C    (0.136) DB6: change for enhancement pack installer (note 1111536)
C    (0.138) DB6: improoved table size estimate for DB8 V8 (note 1119934)
C    (0.144) I5/OS ldappasswd support for 5250 terminal. (note 1129573)
C    (0.144) MSSQL: ODBC fastload on separate connection (note 1131805)
C
C Supported features:
C
C ..retrieving configuration parameters
C ..done
C Running with UTF-8 Unicode
C
C Tue Feb 02 10:23:04 2010
C Running with CLI driver
C DB2 client driver version '09.01.0007'
C Connected to DB2 server type 'DB2/NT64'
C Connected to DB2 version '09.01.0007'
C Connect to 'ENP' as 'SAPENP' schema 'SAPENP' o.k.; con_hdl=0
C Database code page is ok.
C Database collating sequence is ok.
C DB2_WORKLOAD=SAP is set in DB2 registry as required.
C CLI Insert Buffering is disabled on single partition databases.
C DbSl trace SM50: switch request to level 1
C DbSlControl: returning SAPDBHOST='ENP'
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       NO YES NO 000 255 255 20100202 102303 ENP
C DbSlControl: returning SAPDBHOST='ENP'
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Tue Feb 02 10:23:05 2010
I MtxInit: 0 0 0
M SHM_PRES_BUF               (addr: 0000000015400050, size: 4400000)
M SHM_ROLL_AREA          (addr: 000007FFDDA80050, size: 268435456)
M SHM_PAGING_AREA          (addr: 0000000015840050, size: 134217728)
M SHM_ROLL_ADM               (addr: 000000001D850050, size: 2678942)
M SHM_PAGING_ADM          (addr: 000000001DAE0050, size: 525344)
M ThCreateNoBuffer          allocated 544152 bytes for 1000 entries at 000000001DB70050
M ThCreateNoBuffer          index size: 3000 elems
M ThCreateVBAdm          allocated 12176 bytes (50 server) at 000000000AE50050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 17, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0000000021540160, size: 30000000, end: 00000000231DC4E0)
B dbtbxbuf: Buffer TABLP (addr: 00000000231E0160, size: 10240000, end: 0000000023BA4160)
B dbexpbuf: Buffer EIBUF (addr: 0000000023BC0170, size: 4194304, end: 0000000023FC0170)
B dbexpbuf: Buffer ESM   (addr: 0000000023FD0170, size: 4194304, end: 00000000243D0170)
B dbexpbuf: Buffer CUA   (addr: 00000000243E0170, size: 3072000, end: 00000000246CE170)
B dbexpbuf: Buffer OTR   (addr: 00000000246D0170, size: 4194304, end: 0000000024AD0170)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 00000000128BEA10
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile)   = 300
S hostspool list size = 3000
S option list size is 30
S      found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 000000002DDF00D0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 000000002DDF0610
S    using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2272 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A PXA: Locked PXA-Semaphore.
A System page size: 4kb, total admin_size: 11460kb, dir_size: 11392kb.
A Attached to PXA (address 000007FFEDAB0050, size 300000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=000007FF35ED5000 leng=20955136 end=000007FF372D1000)
A >> Shm MMADM area (addr=000007FF363AEF10 leng=244096 end=000007FF363EA890)
A >> Shm MMDAT area (addr=000007FF363EB000 leng=15622144 end=000007FF372D1000)
A RFC Destination> destination ENP_ENP_00 host ENP system ENP systnr 0 (ENP_ENP_00)
A RFC Options> H=ENP,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects          allocated 35354 bytes at 000000002DF60050
N SsfSapSecin: putenv(SECUDIR=F:\usr\sap\ENP\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is F:\usr\sap\ENP\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...completed with return code 5.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
B    dbtran INFO (init_connection '<DEFAULT>' [DB6:700.08]):
B     max_blocking_factor = 30, max_in_blocking_factor      = 60,
B     min_blocking_factor =   1, min_in_blocking_factor      =   1,
B     prefer_union_all    =   1, prefer_join                 =   1,
B     prefer_fix_blocking =   0, prefer_in_itab_opt          =   0,
B     convert AVG         =   1, alias table FUPD            =   0,
B     escape_as_literal   =   0, opt GE LE to BETWEEN        =   0,
B     select *            =0x0f, character encoding          = STD / <none>:-,
B     use_hints           = abap->1, dbif->0x3, upto->2147483647, rule_in->0,
B                           rule_fae->0, concat_fae->0, concat_fae_or->0
W    ITS Plugin: Path dw_gui
W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
W    ITS Plugin: sizeof(SAP_UC) 2
W    ITS Plugin: Release: 700, [7000.0.144.20050900]
W    ITS Plugin: Int.version, [33]
W    ITS Plugin: Feature set: [16]
W    ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N VSI: WP init in ABAP VM completed with rc=0
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume ENP_ENP_00
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Tue Feb 02 10:23:06 2010
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 000000000A960050
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 000000000A9607C0
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 000000000A960800
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 000000000A96080C
M
M Tue Feb 02 10:23:28 2010
M rdisp/rb_cleaned_rfc = 0
A
A Tue Feb 02 10:23:34 2010
A RFC FRFC> fallback on the central gateway ENP sapgw00 activ

Gateway error - Program not registered

Hello,
We were getting the following error while doing a "Connection test" of a TCP/IP RFC destination:
LOCATION SAP-Gateway on host gisrxx / sapgw00
ERROR program SBCX not registered
It's an ECC 6.0 system.
I found SAP note - - 353597 - Registering a RFC program
I executed the following command as sidadm
rfcexec -aSBCX -ggisrxx -xsapgw00
But the command keeps on running on teh command prompt.
And for that duration the RFC works.
But after sometime the command ends and comes back to command prompt and the RFC doesn't work any more.
Could you tell what needs to be done to resolve this issue?
Regards,
Gautam.

Hi Gautam,
Please run the program in background (Unix) or as a service (Windows).
Please go through the following forum post. This should help.
Run rfcexec as service on windows
Br,
Venky

SAP Business Workflow and SAP Netweaver Gateway - Missing extensible elements

Hello,
For a mobile project we use SAP Netweaver Gateway in order to retrieve information from workflows stored into SAP Business Workflow.
We are able to retrieve standard informations for a workflow but custom fields added into "Extensible Elements" section are lost when exit SAP NG.
We have checked the configuration of SAP NG (by 4 differents person) and it seems to be OK.
Do you have an idea why the custom fields are lost during SAP NG processing ?
Thanks in advance
Best regards,
Dominique

Hi Dominique,
FYI. SAP Fiori Approve Requests uses task processing service. This may help.
How to display application data in SAP Fiori Approve Requests app
Regards, Masa
SAP Customer Experience Group - CEG

The Default Gateway Is Not Available / Problem

Hello, I recently purchased this HP Pavileon laptop, and I've been encountering this problem very often (every 2-10 minutes). This problem is getting extremely frustrating as absolutely nobody has been able to provide a fix for this issue.
When the laptop is on battery mode (this does not happen when plugged in); I commonly get disconnected from my wi-fi connection and to fix it, I must run the troubleshooter. This temporarily fixes the issue by resetting the wi-fi adapter.
What I have tried and has not worked:
* Turn off to save power option in the driver settings (in Device Manager) untickets
* Updated drivers
* New power plan
* Tried different drivers
* Complete system restore
The wireless adapter is Realtek RTL 8188EE. Upon running the troubleshooter, this is all the information from the detailed information section:
Windows Network Diagnostics
Publisher details
Issues foundThe default gateway is not available
The default gateway is not availableThe default gateway is a device that connects a local network or computer to the Internet. A broadband modem or router is usually the default gateway.
Fixed
Reset the "WiFi" adapter
Completed
Investigate router or broadband modem issues
Not run
Issues found
Detection details
6The default gateway is not availableFixed
The default gateway is a device that connects a local network or computer to the Internet. A broadband modem or router is usually the default gateway.
Reset the "WiFi" adapterCompleted
This can sometimes resolve an intermittent problem.
Network Diagnostics LogFile Name: 2D0FE1F0-C2C2-43B5-A857-2D2B3C4B8A51.Repair.1.etl Investigate router or broadband modem issuesNot run
If you're connected to a hotspot or domain network, contact the network administrator. Otherwise: 1. Unplug or turn off the device. 2. Once all the lights on the device are off, wait at least 10 seconds. 3. Turn the device on or plug it back in to the power outlet. To restart a router or modem that has a built-in battery, press and quickly release the Reset button.
Detection details
Diagnostics Information (Network Adapter)
Details about network adapter diagnosis:
Network adapter WiFi driver information:
Description . . . . . . . . . . : Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Manufacturer . . . . . . . . . : Realtek Semiconductor Corp.
Provider . . . . . . . . . . . : Realtek Semiconductor Corp.
Version . . . . . . . . . . . : 2012.2.827.2013
Inf File Name . . . . . . . . . : C:\WINDOWS\INF\oem8.inf
Inf File Date . . . . . . . . . : 12 September 2013 10:17:00
Section Name . . . . . . . . . : HP8188ee.ndi
Hardware ID . . . . . . . . . . : pci\ven_10ec&dev_8179&subsys_197d103c
Instance Status Flags . . . . . : 0x180200a
Device Manager Status Code . . : 0
IfType . . . . . . . . . . . . : 71
Physical Media Type . . . . . . : 9
Diagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
Information for connection being diagnosed
Interface GUID: 7c04789b-0b43-472c-abd6-a84cb31e9053
Interface name: Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Interface type: Native WiFi
Connection incident diagnosed
Auto Configuration ID: 1
Connection ID: 1
Connection status summary
Connection started at: 2014-07-24 04:19:49-759
Profile match: Success
Pre-Association: Success
Association: Success
Security and Authentication: Success
List of visible access point(s): 0 item(s) total, 0 item(s) displayed
Connection History
Information for Auto Configuration ID 1
List of visible networks: 1 item(s) total, 1 item(s) displayed
BSS Type PHY Security Signal(RSSI) Compatible SSID
Infra <unknown> Yes 100 Yes Matt
List of preferred networks: 1 item(s)
Profile: Matt
SSID: Matt
SSID length: 4
Connection mode: Infra
Security: Yes
Set by group policy: No
Connect even if network is not broadcasting: No
Connectable: Yes
Information for Connection ID 1
Connection started at: 2014-07-24 04:19:49-759
Auto Configuration ID: 1
Profile: Matt
SSID: Matt
SSID length: 4
Connection mode: Infra
Security: Yes
Pre-Association and Association
Connectivity settings provided by hardware manufacturer (IHV): No
Security settings provided by hardware manufacturer (IHV): No
Profile matches network requirements: Success
Pre-association status: Success
Association status: Success
Last AP: 98-fc-11-88-61-b8
Security and Authentication
Configured security type: WPA2-PSK
Configured encryption type: CCMP(AES)
802.1X protocol: No
Key exchange initiated: Yes
Unicast key received: Yes
Multicast key received: Yes
Number of security packets received: 0
Number of security packets sent: 0
Security attempt status: Success
Connectivity
Packet statistics
Ndis Rx: 34302
Ndis Tx: 32619
Unicast decrypt success: 0
Multicast decrypt success: 0
Unicast decrypt failure: 0
Multicast decrypt failure: 0
Rx success: 0
Rx failure: 0
Tx success: 0
Tx failure: 0
Tx retry: 0
Tx multiple retry: 0
Tx max lifetime exceeded: 0
Tx ACK failure: 0
Roaming history: 0 item(s)
Diagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
For complete information about this session see the wireless connectivity information event.
Helper Class: Auto Configuration
Initialise status: Success
Information for connection being diagnosed
Interface GUID: 7c04789b-0b43-472c-abd6-a84cb31e9053
Interface name: Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Interface type: Native WiFi
Result of diagnosis: There may be problem
Diagnostics Information (Wireless Network Adapter)
Details about wireless network adapter diagnosis:
For complete information about this session see the wireless connectivity information event.
Helper Class: Native WiFi MSM
Initialise status: Success
Information for connection being diagnosed
Interface GUID: 7c04789b-0b43-472c-abd6-a84cb31e9053
Interface name: Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Interface type: Native WiFi
Profile: Matt
SSID: Matt
SSID length: 4
Connection mode: Infra
Security: Yes
Connect even if network is not broadcasting: No
Result of diagnosis: There may be problem
Network Diagnostics LogFile Name: 2D0FE1F0-C2C2-43B5-A857-2D2B3C4B8A51.Diagnose.0.etl
Other Networking Configuration and LogsFile Name: NetworkConfiguration.cab Collection information Computer Name: LAPTOP Windows Version:6.3Architecture:x64Time:24 July 2014 04:34:47
Windows Network Diagnostics Detects problems with network connectivity. Package Version:1.0Publisher:Microsoft Windows

Run the HP Support Asssitant's Tune up application. There should be a new BIOS available. sp66866
Have you installed the latest Windows 8.1 updates?
Do not install optional video graphics updates.
I was runnning into a similar problem with my HP product loan Envy Spectre 13 TouchSmart Ultrabook until I did the updates. I had upgraded my wireless router to a model with 802.11AC specification.
Invoke the Device Manager and ensure that the box next to Allow this computer to turn off this device to save power is unchecked.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

How to call an ebs web service using the soa gateway

Hi All,
I installed Oracle E-Business Suite Release 12.1.1 Media Pack v4 (32bit) and now I wanna use the soa gateway to develop and integration and consume web services. I found the soa gateway/irep and I can browse through the existing services. But how can I call one e. g. using .NET?
For .NET, I need an valid address (URL) to the services. How can I get such an URL.
Example:
I opened the integration repository, browsed to:
Order Management Suite - Order Management - Sales Order - INBOUND: Change Purchase Order XML Transaction.
I cannot find an address at this page which can be used in MS Dev Studio to call the service.
If I click on "Generate WSDL" or try to open the WSDL under the "Web Service - Web Service Provider" section, I get an error message:
Error
SOA Provider Access resulted in exception 'oracle.apps.fnd.soa.util.SOAException: SystemError: Error while sending message to server. Server returned HTTP response code: 500 for URL: http://ebs1.tesis.de:8000/webservices/SOAProvider/EbizAuth?Generate=4283&soa_ticket=HKGsq9YYnoswMKFsHijTPQ..' when attempting to perform 'GENERATE'. Please contact your System Administrator
What exactly does this error mean?
Many thanks,
Konrad

You have to make sure every step in MOS Document ID 726414.1 that is applicable to your E-Business Suite 12.1.x release is performed. Enabling ASADMIN is just one of the steps. In spite of following all the steps in this Document you continue to get the error when clicking "Generate WSDL", please log a Service Request with Oracle Support.I will check all steps again. Maybe I missed one... Thanks!

Access to portal desktop denied through gateway

I'm trying to get the gateway component to configured and working. I've installed gateway on a separate box from my portal server. When I go to the gateway url (using either https or http) I get prompted to login. Once I submit my user credentials, I get this message:
Access to this resource is denied !!
Contact your administrator
If I enter incorrect user credentials, I get an authentication failed, as expected. So authentication is working, but for some reason, I just can't get to the portal desktop! I ensured that my user account has the Access List service. And I haven't changed any URL allow/deny lists from whatever the default templates were, they still allow *.
Any ideas?
Thanks,
Patricia

Are you able to get to the portal desktop without going throwing the gateway ?
What the does the debug error logs show ?

Return 504 Gateway TimeOut when access exchange service by domain/user and password

hi,
here is the scenario: a user of our app is in ntdev domain, and his exchange server located at apj.cloudmail.microsoft.com. our backend api is deployed at the Azure servers at US West.
our api get 504 Gateway Timeout when calling the
FindFolders API of exchangeService. does anyone know how to fix this issue? the following is the core code:
var
service = newExchangeService(ExchangeVersion.Exchange2010);
service.Credentials =
newNetworkCredential(username,
password, domain);
service.AutodiscoverUrl(emailAddress, RedirectionUrlValidationCallback);
service.FindFolders(
WellKnownFolderName.Root,
newFolderView(1));

That doesn't sound like its an EWS issue more an issue with the Network path your trying to traverse to the Exchange Server. My suggestion is that you test EWS using the EWSeditor
https://ewseditor.codeplex.com/ (eg it sounds like you may have proxy server that expecting authentication etc.).
Cheers
Glen

Caller ID not working on H323 Gateway

Hi,
I have a CCM Version 4.1.3 set-up to cater for 200 phones, I have a VG gateway in one of the sites that uses an FXO card for local calls, this VG is set-up as an H323 gateway, however calls coming throguh the PSTN line onto the FXO card and then onto an IP phone are not displaying Caller ID.
Just wondering if anyone has seen this before, I know that on an MGCP gateway the FXO cards don't support Caller-ID but we have it set-up as H323.
Thanks
Paul

Funny, this is a question straight from one of the CCVP tests, although I won't say which one.
Try "caller-id enable" in global mode and "station-id name" on the voice-port.
http://www.cisco.com/en/US/tech/tk652/tk653/technologies_configuration_example09186a00800a9a49.shtml

Gateway

Similar Messages

Maybe you are looking for