Gather distribution_name stopped with error: Login failed

Does anyone know what this error means....? I'm getting it on one
distribution I have. I've looked thru the KB and googled it, and can't find
anything that really applies.
Graham

Just an update, but this error went away when I installed Zen7 SP1 (which
seems to be fixing a few of our outstanding issues).
Graham
"Graham Mitchell" <[email protected]> wrote in message
news:mQgdh.9463$[email protected]..
> I've also just deleted and recreated the distribution, and I still get the
> same error.
>
>
> Graham
>
>
> "Jared Jennings" <[email protected]> wrote in message
> news:mf3dh.9087$[email protected]..
>> Graham Mitchell,
>>
>>>
>>>Does anyone know what this error means....? I'm getting it on one
>>>distribution I have. I've looked thru the KB and googled it, and can't
>>>find anything that really applies.
>>
>> It sounds as if the distributor object did not correctly install. Did
>> this just start happening?
>>
>> Have you implemented Universal Password on this tree?
>>
>> --
>> Jared Jennings - Data Technique, Inc.
>> Novell Support Forums Sysop
>> My Blog and Wiki with Tips, Tricks, and Tutorials
>> http://jaredjennings.org
>
>

Similar Messages

Sapinst stops with error while installing ess component for Java AS

Dear experts,
I really hope you can help me with this one,
We are installing a ABAP/Java AS development system and sapinst has gone through 75% of all execution tasks nicely,
but then stopped with error while deploying components for the Java AS:
ERROR 2009-03-30 13:01:27
CJS-30156 SDM deployment failed for at least one of the components to deploy.<br> SOLUTION: Check 'C:\Program Files/sapinst_instdir/ERP/SYSTEM/ORA/DISTRIBUTED/AS/CI/callSdmViaSapinst.log' for more information.
ERROR 2009-03-30 13:01:28
FCO-00011 The step enableUsageTypes with step key |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|15|0|enableUsageTypes was executed with status ERROR .
Any help would be really appreciated as I am stuck with this and dont seem to be able to find any information on this one.
Thanks a lot for your help in advance.
Here is the crucial part of callSdmViaSapinst.log:
Mar 30, 2009 12:55:18... Info: Starting: Initial deployment: Selected development component 'ess/bp_ess'/'sap.com'/'MAIN_ERP05VAL_C'/'788220'/'0' will be deployed.
Mar 30, 2009 12:55:18... Info: SDA to be deployed: D:\usr\sap\DE1\DVEBMGS00\SDM\root\origin\sap.com\ess\bp_ess\MAIN_ERP05VAL_C\0\788220\sap.com_ess~bp_ess.sda
Mar 30, 2009 12:55:18... Info: Software type of SDA: J2EE
*Mar 30, 2009 12:55:18... Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) ******
Mar 30, 2009 1:00:21 PM Info: Begin of log messages of the target system:
*09/03/30 12:55:19 - ************************************************************
09/03/30 12:58:07 - Start updating EAR file...
09/03/30 12:58:07 - start-up mode is lazy
09/03/30 12:58:08 - EAR file updated successfully for 578ms.
09/03/30 12:58:08 - Start deploying ...
09/03/30 12:58:42 - EAR file uploaded to server for 30641ms.
09/03/30 13:00:20 - ERROR: Not deployed. Deploy Service returned ERROR:
                     java.rmi.RemoteException: Cannot deploy application sap.com/ess~bp_ess..
                     Reason: <--Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Exception during deploy: Failed to deploy archive D:\usr\sap\DE1\DVEBMGS00\j2ee\cluster\server0\.\temp\deploy\work\deploying\reader1238414327258\sap.comessbp_ess.epa
               The following objects could not be locked: [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess**.iviews/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.mx/com.sap.pct.erp.ess.addr/com.sap.pct.erp.ess.addr|pcd_service], [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.iviews/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.de/com.sap.pct.erp.ess.addr|pcd_service], [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.iviews/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.id/com.sap.pct.erp.ess.addr/com.sap.pct.erp.ess.addr|pcd_service], [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.pages/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.jp/com.sap.pct.erp.ess.addr/com.sap.pct.erp.ess.addr|pcd_service], [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.pages/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.de/com.sap.pct.erp.es

Thanks Désirée for your answer and apologies for the late update on this one.
This issue is resolved now, the reason for the error was a lack of memory which probably triggered a timeout in sapinst. After upgrading the memory to 7GB and re-starting the ABAP+Java AS and resuming sapinst everything went through fine. However, this was hard to spot because the logs wouldn't tell you about the lack of memory but about everything else!
regards,
Manfred

NWCE 7.1 EHP1 installation - server0 stopped with error code 2150

Hi All,
***I try to install NWCE 7.1 EHP1 with Oracle 10.2 on Windows Server 2003 Enterprise X64. On phase 29 of 40 Start Java Engine, it gives me this error:*****
WARNING[E] 2010-08-11 13:18:27.468
CJS-30222 Java process server0 of instance MII/J00 increased error count to 1. Giving up.
ERROR 2010-08-11 13:18:27.593
FCO-00011 The step startJava with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_StartJava|ind|ind|ind|ind|8|0|startJava was executed with status ERROR .
WARNING 2010-08-11 13:18:27.687
Could not get property IDs of the JavaScript object.
ERROR 2010-08-11 13:18:27.687
FJS-00010 Could not get value for property .
****I checked it on MMC and server0 stopped with error code 2150 (Core service start fails on initial startups )*****
std_server0 is here:
node name   : server0
host name   : sapmii
system name : MII
system nr. : 00
started at : Wed Aug 11 13:19:10 2010
JVMX version - Sep 4 2008 23:21:58 - 51_REL - optU - windows amd64 - bas2:106386 (mixed mode)
(CompilerOracle read from file D:\usr\sap\MII\J00\exe\sapjvm_5\jre\.hotspot_compiler )
(CompilerOracle exclude com/sun/tools/javac/code/SymbolMethodSymbol overrides)
The active factory is : com.sap.engine.boot.loader.StandardClassLoaderFactory
Class loading cache information loaded from package index [D:\usr\sap\MII\J00\j2ee\cluster\bin\index.list]
Reading kernel properties from kernelProperties.bin file...
   Checked the data for 15 ms
   Read the objects for 93 ms
   Substituted the values for 16 ms
Finished reading kernel objects for 109 ms
Startup mode [NORMAL] and action [NONE] read
AS Java version [7.11.3710.34306.20081117170308] is starting server process [ID7616850] on host [sapmii]...
Loading [LogManager]... [31] ms
Loading [PoolManager]... [0] ms
Loading [ApplicationThreadManager]... [47] ms
Loading [ThreadManager]... [0] ms
Loading [ClassLoaderManager]... [32] ms
Loading [ClusterManager]... [140] ms
Loading [LockingManager]... [31] ms
Loading [ConfigurationManager]... [1000] ms
Loading [CacheManager]... [GC [ParNew: 436736K->8479K(655104K), 0.0153459 secs] 436736K->8479K(5024512K), 0.0154061 secs]
[47] ms
Loading [DatabaseManager]... [203] ms
Loading [SessionManager]... [141] ms
Loading [LicensingManager]... [16] ms
Loading [ServiceManager]...
Initialize components for : 312 ms.
Resolve components for : 31 ms.
Load components for 1953 ms.
Loading services.
Calculate startup service set for 125 ms.
Service [r3startup] started. [0] ms / [0] CPU ms
Service [tc~je~content~classification~handler] started. [0] ms / [0] CPU ms
Service [webservices] started. [0] ms / [0] CPU ms
Service [tc~esi~uddi~content~handler] started. [0] ms / [0] CPU ms
Service [engine.dsr.facade] started. [0] ms / [0] CPU ms
Service [tc~je~cross~api] started. [0] ms / [0] CPU ms
Service [engine.lm.log.facade] started. [0] ms / [0] CPU ms
Service [tc~je~mngt_model~srv] started. [0] ms / [0] CPU ms
Service [tc~je~security~api] started. [0] ms / [0] CPU ms
Service [cluster] started. [16] ms / [0] CPU ms
Service [runtimeinfo] started. [16] ms / [0] CPU ms
Service [jmx_notification] started. [31] ms / [15] CPU ms
Service [userstore] started. [47] ms / [0] CPU ms
Service [memory] started. [63] ms / [15] CPU ms
Service [timeout] started. [78] ms / [31] CPU ms
Service [cross] started. [94] ms / [46] CPU ms
Service [log_configurator] started. [94] ms / [31] CPU ms
Service [locking] started. [0] ms / [0] CPU ms
Service [tc~sec~destinations~provider] started. [125] ms / [109] CPU ms
Service [p4] started. [62] ms / [62] CPU ms
Service [classload] started. [0] ms / [0] CPU ms
Service [classload.facade] started. [0] ms / [0] CPU ms
Service [msp] started. [16] ms / [15] CPU ms
Service [classpath_resolver] started. [16] ms / [15] CPU ms
Service [deploy] start ================= ERROR =================
java.lang.IllegalArgumentException: No enum const class com.sap.engine.services.deploy.container.ComponentReference.SERVu0130CE
     at java.lang.Enum.valueOf(Enum.java:196)
     at com.sap.engine.services.deploy.container.ComponentReference.valueOf(ComponentReference.java:18)
     at com.sap.engine.services.deploy.server.Component.<init>(Component.java:44)
     at com.sap.engine.services.deploy.server.Component.create(Component.java:60)
     at com.sap.engine.services.deploy.server.properties.impl.PropManagerImpl.readStandardAppRefs(PropManagerImpl.java:497)
     at com.sap.engine.services.deploy.server.properties.impl.PropManagerImpl.<init>(PropManagerImpl.java:234)
     at com.sap.engine.services.deploy.server.properties.PropManagerFactory.initInstance(PropManagerFactory.java:27)
     at com.sap.engine.services.deploy.server.DeployServiceFrame.start(DeployServiceFrame.java:56)
     at com.sap.engine.core.service630.container.ServiceRunner.startFrame(ServiceRunner.java:155)
     at com.sap.engine.core.service630.container.ServiceRunner.startService(ServiceRunner.java:113)
     at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:60)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:162)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:260)
FATAL: Critical shutdown with exit code [2150] was requested due to [AS Java cannot be started; core service [deploy] failed to start]
****What is the problem and how can I solve the problem.*****
Thanks.

Hi,
Based on the Java trouble shooting guide 'error 2150' indicates that a core service failed to start. http://wiki.sdn.sap.com/wiki/display/TechTSG/(JSTTSG)(Kernel)ExitCodes. Based on the threads below it could be Oracle listener related.
Re: FCO-00011 error occurred when install ECC6.0 SR3 IDES on Win2003_X64
Problem installing JAVA WAS - ERP 7.0 (EHP4) - NW 7.01 - RHEL 5.3 - ORACLE
HTH.
O.

J2EE Engine Stopped with Error 11113

Hi All,
After I changed some values in the Portal UME to connect to ECC 6.0, after the restart of cluster the J2EE is not coming up and getting stopped with Error 11113.
I have changed the Datasource to ABAP and tried resetting the values in Configtool as per the previous threads in the forum but could not get my J2EE engine up.
Please find the last some last line of "std_server0.out" file:
stdout/stderr redirect
node name   : server0
pid         : 3456
system name : EP7
system nr. : 01
started at : Wed May 07 12:35:19 2008
Reserved 1610612736 (0x60000000) bytes before loading DLLs.
[Thr 5340] MtxInit: -2 0 0
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
SAP J2EE Engine Version 7.00   PatchLevel is starting...
Loading: LogManager ... 562 ms.
Loading: PoolManager ... 16 ms.
Loading: ApplicationThreadManager ... 203 ms.
Loading: ThreadManager ... 62 ms.
Loading: IpVerificationManager ... 16 ms.
Loading: ClassLoaderManager ... 16 ms.
Loading: ClusterManager ... 234 ms.
Loading: LockingManager ... 250 ms.
Loading: ConfigurationManager ... 2203 ms.
Loading: LicensingManager ... 31 ms.
Loading: CacheManager ... 172 ms.
Loading: ServiceManager ...
Loading services.:
Service memory started. (31 ms).
Service runtimeinfo started. (172 ms).
Service cafeucc~api started. (281 ms).
Service cross started. (219 ms).
Service timeout started. (156 ms).
Service file started. (500 ms).
Service userstore started. (78 ms).
Service jmx_notification started. (94 ms).
Service trex.service started. (156 ms).
Service p4 started. (282 ms).
Service classpath_resolver started. (46 ms).
Service log_configurator started. (7172 ms).
Service locking started. (0 ms).
Service naming started. (515 ms).
Service http started. (703 ms).
Service javamail started. (297 ms).
Service failover started. (219 ms).
Service appclient started. (203 ms).
Service ts started. (250 ms).
Service jmsconnector started. (297 ms).
Service licensing started. (32 ms).
Service cafeugpmailcf started. (281 ms).
Service connector started. (531 ms).
Service webservices started. (953 ms).
Service iiop started. (672 ms).
Service deploy started. (20344 ms).
Service MigrationService started. (47 ms).
Service bimmrdeployer started. (16 ms).
Service configuration started. (31 ms).
Service dbpool started. (2453 ms).
May 7, 2008 12:35:57 PM         com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_78] Fatal: User Management Engine (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed to connect to the ABAP backend system. Check that connection data are correct and the backend system is available. Error message: "'password' missing". Connection data (obtained from properties of UME service in section "ume.r3.connection.master.": "{
receiverid_guest=master
poolmaxwait=10000
client=800
user=sapuser
sysnr=02
poolmaxsize=10
ashost=SAP4
receiverid=master
May 7, 2008 12:35:57 PM         com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_78] Fatal: Initialization of UME persistence adapter "R3_DATASOURCE" failed.
May 7, 2008 12:35:57 PM   com.sap.security.core.InternalUMFactory [SAPEngine_System_Thread[impl:5]_78] Fatal:
May 7, 2008 12:35:57 PM   com.sap.security.core.InternalUMFactory [SAPEngine_System_Thread[impl:5]_78] Fatal:
service com.sap.security.core.ume.service ================= ERROR =================
Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: <Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='UME initialization failed.', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key UME initialization failed.
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:346)
     at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
     at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:211)
     at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:142)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:105)
Caused by: com.sap.security.api.UMException: Could not initialize principal factory class 'com.sap.security.core.imp.PrincipalFactory'!: Could not instantiate principal factory class 'com.sap.security.core.imp.PrincipalFactory'!: 'password' missing
     at com.sap.security.core.InternalUMFactory.initializeClass(InternalUMFactory.java:1258)
     at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:302)
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:251)
     ... 6 more
com.sap.engine.frame.ServiceException: <Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='UME initialization failed.', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key UME initialization failed.
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:346)
     at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
     at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:211)
     at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:142)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:105)
Caused by: com.sap.security.api.UMException: Could not initialize principal factory class 'com.sap.security.core.imp.PrincipalFactory'!: Could not instantiate principal factory class 'com.sap.security.core.imp.PrincipalFactory'!: 'password' missing
     at com.sap.security.core.InternalUMFactory.initializeClass(InternalUMFactory.java:1258)
     at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:302)
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:251)
     ... 6 more
[Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
May 7, 2008 12:35:57 PM             com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_78] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
Please take a look and help me in resolving this problem. Do let me know you need anymore other logs for analysis ?
Regards,
Srikar

Hi Karthik,
I have checked all the UME properties and are fine. I am trying to connect to ECC 6.0 Clnt 800 with Communication user I created called "portaluser" and the pwd along with system number and application host.
I tried giving all the details in Configtool > Ume properties but again the same problem J2EE is getting stopped with the same error.
About the SAPJSF user, it has been created while installation as a Dailog user in the EP system. I logged into the EP system and checked that in SU01. It there but not as a communication user but as a Dialog user.
Can you let me know what could be the issue ?
Regards,
Srikar
Edited by: Srikar Vankadaru on May 8, 2008 7:59 PM

HT204406 When downloading albums some songs stop with error messages..

Hi, I was trying to download Armin van Buuren "A State of Trance 2011". The individual songs downloaded fine but both continuous dj mixes failed to download, they get right to the end and then stop with error messages. This is the 2nd Armin van Buuren album this has happened to! Please help!
Dave.

The 2nd mix still won't play, it just skips to the next track on the album. In my purchases it says it's downloaded, it just won't seem to play.
It sounds damaged.
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one. See the following document for instructions:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If you get another -50 on the redownload, perhaps try the "Error -50," "-5000," "8003," "8008," or "-42023"section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

Download of adobe creative cloud desktop always stops with error code 207. Trying for 6 hours now. What now?

Hi.
I started a Creative Cloud abonement and try to install applications. But the download of the "adobe creative cloud desktop" always stops with error code 207 (No answer from server, try later). I am trying for 6 hours but the problem is still the same. What can I do?
Thank you,
Heiko

Errors 201 & 205 & 206 & 207 or several U43 errors
-http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Entourage error "The server for my email acount returned the error "Login Failed". Your username/password or security settings may be incorrect. Would you like to try re-entering your password?"

I have 1 user on a Mac who just started having a pop up message when opening entourage "The server for my email acount returned the error "Login Failed".
Your username/password or security settings may be incorrect. Would
you like to try re-entering your password?" I know the settings are right because the users mail works on iPhone,iPad,an windows machine. I have deleted entourage plist and also tried a new user same message appears in new user.

See thread here:
https://discussions.apple.com/message/23175721#23175721
It worked for me.

TS1539 How do we deal with Error 50 when downloading a movie rental then stopped with error 50 and when I try to resume the downld, it doesn't do it?

How do we deal with Error 50 when downloading a movie rental then stopped with error 50 and when I try to resume the downld, it doesn't do it?

Yeah this "fix" is bunk. The movie is downloading just fine, but the extra features is the one giving me this error code. It is NOT my firewall. If it was, then both files wouldn't download. Plus, I already have the firewall "issue" tacked down and fixed. Have had it fixed for months now. No, this is due to the "new" itunes version 11 software. The only conclusion to fix this issue is UPgrading from 11 back to 10.7 which is what I am going to do. This is completely ridiculous! Come on, Apple, get itunes working once and for all, and fire the people responsible for itunes 11, just like you did to the guy who was responsible for apple maps. Thankfully Google came back to the rescue with google maps app.

Upgraded pc to ios7 but when syncing to iphone 4 it crashed. Phone is now in recovery mode but it nearly finishes recovery then stops with error 3014. Phone rendered useless until this is fixed. Help pls?

Upgraded pc to ios 7 but when syncing to iphone 4 it crashed. Phone is now in recovery mode but it nearly finishes recovery then stops with error 3014. Phone rendered useless until this is fixed. Help pls? I have tried many of the suggestions for the error code given. Im getting frustrated. I'm not a techno so would appreciate simple terms or ways of explanation. Thx!!

I have the exact same issue right now!

TM stops after 170 KB, TM prepares for ages, TM stops with error

Here's another one:
TM stops after 170 KB, TM prepares for ages, TM stops with error
I've had it all - after some successful backups. Now I can't make any; error messages ("could not complete because an error has occurred" - thank you very much, Apple, for that most helpful explanation).
Apple turns us all into beta testers! Another product that is shipped long before it's ready due to marketing strategies - and customers are the idiots.
I agree: +Don't use TM!+

I had a very similar problem a few months ago. I spent several days troubleshooting it. Try disabling TM and see if the Finder stops freezing. You might need to wait two or three days to find out. Then try disconnecting your external disk drives and see what happens after another two or three days. I traced my problem back to a Western Digital external disk drive, so I contacted Western Digital via their web site. The next day, they emailed me directions on how to update the disk drive's firmware. I did the update and the problem went away.

Sm35 / session stops with error F5 097

Hi together,
we´ve created a batch input session (report RFBIBL00). When we go to trx. sm35 erverything looks fine within the simulation. But when we execute the the session the process stops with error "F5 097"
The error occurs in dypro SAPMF05A /302. No field is beeing filled her. Wenn we fill the fields manually the session breaks away.
We are working with release ECC 6.0.
Thanks for any help.

Hi Rob,
Nope.
I want to create an entry with a positive amount (>0).
Thus I use report RFBIBL00 to create this entries/session.
When I simulate this very session in trx. sm35 erverything looks OK.
--> there is the expected positive amount in field bseg-wrbtr.
But when I execute the session these information get lost! The entire dynpro remains empty.
If I then try to fill the fields manually, no further processing is possible.

Unhandled Exception Error - Login Failed for User

Hello,
I am receiving an error when I run my application stating “Unhandled exception has occurred. If you click continue, the application will ignore the error………..Login failed for MyUser.
When I click the Continue button the application runs and seems to work properly. This application used to run without receiving the error and I did not make any changes. I have another application that is using basically the exact same code and does not
receive the error. The only difference is the application is querying a different DB but using the exact same connection string. The error only occurs when I run the exe file created from the build. When I run (debug) the application from within the VS 2013
IDE I do not receive the error.
Here are the details to the error message:
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.Data.OleDb.OleDbException (0x80040E4D): Login failed for user 'jobrunner'.
   at System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection)
   at System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
   at System.Data.ProviderBase.DbConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
   at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
   at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
   at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
   at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
   at System.Data.ProviderBase.DbConnectionInternal.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
   at System.Data.OleDb.OleDbConnection.Open()
   at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
   at System.Data.Common.DbDataAdapter.Fill(DataTable[] dataTables, Int32 startRecord, Int32 maxRecords, IDbCommand command, CommandBehavior behavior)
   at System.Data.Common.DbDataAdapter.Fill(DataTable dataTable)
   at LoanOrig_FDIC_Codes.DataSet1TableAdapters.I_LoansTableAdapter.Fill(I_LoansDataTable dataTable) in u:\Visual Studio Projects\LoanOrig_FDIC_Codes\LoanOrig_FDIC_Codes\LoanOrig_FDIC_Codes\DataSet1.Designer.cs:line 1668
   at LoanOrig_FDIC_Codes.Form1.Form1_Load_1(Object sender, EventArgs e) in u:\Visual Studio Projects\LoanOrig_FDIC_Codes\LoanOrig_FDIC_Codes\LoanOrig_FDIC_Codes\Form1.cs:line 152
   at System.Windows.Forms.Form.OnLoad(EventArgs e)
   at System.Windows.Forms.Form.OnCreateControl()
   at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
   at System.Windows.Forms.Control.CreateControl()
   at System.Windows.Forms.Control.WmShowWindow(Message& m)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   at System.Windows.Forms.ContainerControl.WndProc(Message& m)
   at System.Windows.Forms.Form.WmShowWindow(Message& m)
   at System.Windows.Forms.Form.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
LoanOrig_FDIC_Codes
    Assembly Version: 1.0.0.0
    Win32 Version: 1.0.0.0
    CodeBase: file:///U:/Visual%20Studio%20Projects/LoanOrig_FDIC_Codes/LoanOrig_FDIC_Codes/LoanOrig_FDIC_Codes/bin/Debug/LoanOrig_FDIC_Codes.exe
System.Windows.Forms
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System.Drawing
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
System
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34238 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
System.Configuration
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
System.Xml
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
System.Data
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_32/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll
System.Data.DataSetExtensions
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Data.DataSetExtensions/v4.0_4.0.0.0__b77a5c561934e089/System.Data.DataSetExtensions.dll
System.Numerics
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Numerics/v4.0_4.0.0.0__b77a5c561934e089/System.Numerics.dll
System.Transactions
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_32/System.Transactions/v4.0_4.0.0.0__b77a5c561934e089/System.Transactions.dll
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
I'm not sure what the JIT debugger is but to my knowledge my other apps are not using that. The production username and password are correct in the connection string so I'm not clear why I am receiving this error especially since I'm not receiving the
error on my other application. I have also attached the code just in case it is needed. Any assistance will be greatly appreciated. Thank you.
Dave
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
using System.Data.SqlClient;
using ClosedXML.Excel;
using DocumentFormat.OpenXml;
using System.IO;
namespace LoanOrig_FDIC_Codes
public partial class Form1 : Form
SqlCommand sqlCmd;
SqlDataAdapter sqlDA;
DataSet sqlDS;
DataTable sqlDT;
SqlCommand sqlCmdCnt;
public Form1()
InitializeComponent();
//BEGIN BUTTON LOAD CLICK EVENT
private void btnLoad_Click(object sender, EventArgs e)
string sqlCon = "Data Source=FS-12345; Initial Catalog=ExtractGenerator; User ID=MyUser; Password=MyPW";
//Set the 2 dateTimePickers to today's date
DateTime @endDate = End_dateTimePicker.Value.Date;
DateTime @startDate = Start_dateTimePicker.Value.Date;
//Validate the values of the 2 dateTimePickers
if (endDate < startDate)
MessageBox.Show("End Date must be greater than or equal to the Start Date OR Start Date must be less than or equal to the End Date ", "Incorrect Date Selection",MessageBoxButtons.OK,MessageBoxIcon.Error);
//Reset both dateTimePickers to todays date
Start_dateTimePicker.Value = DateTime.Today;
End_dateTimePicker.Value = DateTime.Today;
return;
//End of date validation
string sqlData = @"SELECT AcctNbr,
CurrAcctStatCD,
Org,
MJAcctTypCD,
MIAcctTypCD,
NoteOriginalBalance,
ContractDate,
FDICCATCD,
FDICCATDESC,
PropType,
PropTypeDesc
FROM I_Loans
WHERE CAST(ContractDate AS datetime) BETWEEN @startdate AND @enddate ORDER BY ContractDate";
SqlConnection connection = new SqlConnection(sqlCon);
SqlCommand sqlCmd = new SqlCommand(sqlData, connection);
sqlCmd.Parameters.AddWithValue("@startDate", startDate);
sqlCmd.Parameters.AddWithValue("@endDate", endDate);
sqlDS = new DataSet();
sqlDA = new SqlDataAdapter(sqlCmd); //SqlAdapter acts as a bridge between the DataSet and SQL Server for retrieving the data
connection.Open();
sqlDA.SelectCommand = sqlCmd; //SqlAdapter uses the SelectCommand property to get the SQL statement used to retrieve the records from the table
sqlDA.Fill(sqlDS, "I_Loans"); //SqlAdapter uses the "Fill" method so that the DataSet will match the data in the SQL table
sqlDT = sqlDS.Tables["I_Loans"];
//Code section to get record count
sqlCmdCnt = connection.CreateCommand();
sqlCmdCnt.CommandText = "SELECT COUNT(AcctNbr) AS myCnt FROM I_Loans WHERE ContractDate BETWEEN @startDate AND @endDate";
sqlCmdCnt.Parameters.AddWithValue("@startDate", startDate);
sqlCmdCnt.Parameters.AddWithValue("@endDate", endDate);
int recCnt = (int)sqlCmdCnt.ExecuteScalar();
txtRecCnt.Text = recCnt.ToString();
btnExport.Enabled = true;
//End of code section for record count
connection.Close();
dataGridView1.DataSource = sqlDS.Tables["I_Loans"];
dataGridView1.ReadOnly = true;
//Reset both dateTimePickers to todays date
Start_dateTimePicker.Value = DateTime.Today;
End_dateTimePicker.Value = DateTime.Today;
//END BUTTON LOAD CLICK EVENT
//BEGIN BUTTON EXPORT CLICK EVENT
private void btnExport_Click(object sender, EventArgs e)
SaveFileDialog saveFD = new SaveFileDialog();
{ //ClosedXML code to export datagrid result set to Excel
string dirInfo = Path.GetPathRoot(@"\\FS-03250\users\dyoung\LoanOrig_FDIC_Codes");
if (Directory.Exists(dirInfo))
var wb = new XLWorkbook();
var ws = wb.Worksheets.Add(sqlDT);
ws.Tables.First().ShowAutoFilter = false;
//SaveFileDialog saveFD = new SaveFileDialog(); //I moved this variable to the top of the btnExport code block so that the variable will be available thru the entire scope of that code block
saveFD.Title = "Save As";
saveFD.Filter = "Excel File (*.xlsx)| *.xlsx";
saveFD.FileName = "LoanOrig_FDIC_Codes_" + DateTime.Now.ToString("yyyy-MM-dd");
if (saveFD.ShowDialog() == System.Windows.Forms.DialogResult.OK)
Stream stream = saveFD.OpenFile();
wb.SaveAs(stream);
stream.Close();
else if (saveFD.ShowDialog() == System.Windows.Forms.DialogResult.Cancel)
MessageBox.Show("Save file operation has been canceled", "Save As Canceled", MessageBoxButtons.OK, MessageBoxIcon.Stop);
return;
//End of ClosedXML code
MessageBox.Show("File has been exported to " + saveFD.FileName, "File Exported", MessageBoxButtons.OK, MessageBoxIcon.Information);
//MessageBox.Show("File has been exported to U:\\LoanOrig_FDIC_Codes", "File Exported", MessageBoxButtons.OK, MessageBoxIcon.Information);
else
MessageBox.Show("Drive " + saveFD.FileName + " " + "not found, not accessible, or you may have invalid permissions");
//MessageBox.Show("Drive " + "U:\\Visual Studio Projects\\LoanOrig_FDIC_Codes" + " " + "not found, not accessible, or you may have invalid permissions");
return;
//END THE SAVE AS PROCESS
//END BUTTON EXPORT CLICK EVENT
private void Form1_Load(object sender, EventArgs e)
//Set dates to be today's date when the form is openend
Start_dateTimePicker.Value = DateTime.Today;
End_dateTimePicker.Value = DateTime.Today;
private void Form1_Load_1(object sender, EventArgs e)
// TODO: This line of code loads data into the 'dataSet1.I_Loans' table. You can move, or remove it, as needed.
this.i_LoansTableAdapter.Fill(this.dataSet1.I_Loans);
private void iLoansBindingSource_CurrentChanged(object sender, EventArgs e)
private void btnExit_Click(object sender, EventArgs e)
this.Close();
David Young

In SQL you have a login which allows access to the server but you must also have permissions to access each database that you will use (including Master). So I would verify that your user also has the necessary permissions on the database itself and
not just the SQL instance. The error you're getting is from SQL saying that the user doesn't have permissions. If it works for 1 DB but not the other on the same SQL instance then it is likely a missing permission on the DB itself.
I should note that you have a hard coded conn string in your code but the error is for a different user. I'm assuming that you simply posted it there for convenience and that you changed the values to obscure the data. If you are actually getting
the info from your config file then verify the connection string is correct. Also be sure to not use Integrated Security since it appears that you are using SQL authentication.

Windows Update does not work, Windows Standalone Update Installer stops with error 0xc8000247 (Windows 7 Home Premium on Acer Aspire 1810TZ notebook)

I purchased a new notebook with Windows 7 in October. During the first weeks I uninstalled McAfee and replaced the harddrive. Since November Windows Update fails with error messages and defender does not start anymore. I made several virus scans (complete) with multiple antivirus programs but nothing showed up.
Since it took my days to install various software, I do not want to re-install W7. I also have no good backup that I could restore.
I am really surprised that there is not even a single entry regarding the error code in the Microsoft Knowledge base or elsewhere.
I really would appreciate help.

I hit this same problem... I spent days trying to figure out what went wrong. MS advise of doing; Windows7 re-installs, BIOS/firmware updates, drivers changed, etc etc etc.
I installed a new(large) SEAGATE Momentus XT hybrid 750GB SATA drive upon newly purchased notebook, but the twist here is between the storage configuration mode in the BIOS, ATA vs. AHCI. See, the DELL BIOS required to configure my laptop storage for AHCI
mode, because I had the 4GB Intel Flash Cache Module (Turbo Memory) installed on the DELL Precision notebook. The Flash Cache is installed internally in the mini-pcie slot, loaded the Intel storage drivers, and when it works, is an outstanding feature which
supports:
Windows ReadyDrive*
Windows ReadyBoost*
Looking at the details of the Intel storage drivers that support the INTEL TURBO MEMORY, they're from 2009. Of course it was recommended by users to install these drivers first before anything else, so it would function best, but this was part of the
cause to all the problems with Windows 7. I've provided links to Intel Flash Cache info for those interested. Unfortunately, loading the HP/Intel Storage drivers fixes the Windows permissions/update problems, but "Breaks" the Intel Turbo Flash Cache
functionality now, even though Microsoft still supports ReadyDrive in Windows 7.
"Intel® Turbo Memory is a primary PC component, along with the CPU, chipset, and system memory. It caches large amounts of frequently used data or user selected applications for faster access by the processor. This decreases the need for hard-disk accesses,
saving both time and power, which equates to increased performance and energy efficiency. That's good news for users who run data-intensive software like media applications. It's also a good match to the substantial system requirements to load and run Windows
Vista*.
Intel Turbo Memory is a single solution that accelerates data transfer both to and from the processor."
Intel discontinued support for the modules or drivers with the marketing move to producing their own SSD storage drives.
WIKI: http://en.wikipedia.org/wiki/Intel_Turbo_Memory
INTEL page: http://www.intel.com/cd/channel/reseller/apac/eng/products/mobile/mprod/turbo_memory/396715.htm
Intel Drivers/Support Turbo Memory: http://www.intel.com/cd/channel/reseller/apac/eng/products/mobile/mprod/turbo_memory/396719.htm
For me, I hit all the symptoms everyone else hit and thanks to humphrey for his find. I just wish Microsoft/Intel would get together and fix this Windows 7 issue between SW/HW; Large Drive Sizes, Licensing/Permissions, Flash Memory, ATA vs. ACHI, BIOS, etc.
There's been an incredible amount of loss productivity, resources, and costs incurred on this one ISSUE by everyone involved.
Intel Member login for Mobility Turbo Memory Flash Cache pdf: http://www.intel.com/cd/channel/reseller/asmo-na/eng/products/mobile/mprod/turbo_memory/394947.htm

ITunes Movie Extras stopping with error -19

After download completes for a Movies iTunes Extras package, the program processes the download package and then stops with an Error = -19
Does anyone know what this error is or how it can be corrected? I've searched everywhere and haven't seen any information about this.

I've had this problem myself recently with 2 Blu-Ray films which came with iTunes copies. Both films downloaded fine, but the iTunes Extras for both fail to complete with the same error code.
I've been in touch with Apple who responded really quickly, and they have basically solved nothing. They gave me a small walkthrough to do which I was unable to complete because one step required removing a folder from my machine which didn't exist in the first place. The same person has been back in touch with me 3 times now, following it up (which is nice of them at least, they don't just forget about the problem) but the problem persists to the point where I'm convinced it will never be fixed, as the Customer Service rep has basically had me retry the same thing over and over...
I'm at the stage where I'm willing to just concede defeat, at least I have the extras on Disc too I suppose.
I'm just about to reply to his last email asking if the problem was still there, if I get anywhere further I'll be sure to let you know! But I'd suggest trying to email them yourself too and see if the reply you get actually works!

Linked Server error: Login Failed for user 'NT AUTHORITY\ANONYMOUS LOGON' between sql server 2005 32 bit and sql server 2012 64 bit

Hi All,
Here the linked server is created between sql server 2012 64 bit and sql server 2005 32 bit. I am getting the below error when i try to access linked server from third server. I have created linked from Instance 1 to Instance 2. When i access it from
instance 3 i am getting the below error. SPN setting has been done between these 2 servers. Also the option 'Trust the delegate' is enabled for the both the service account.
'Login Failed for user 'NT AUTHORITY\ANONYMOUS LOGON'
Appreciate your quick response.
Vikas.M.S

Hello,
Please read the following resources:
http://www.databasejournal.com/features/mssql/article.php/3696506/Setting-Up-Delegation-for-Linked-Servers.htm
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/ea26de43-4c6b-4991-86d7-e1578f107c92/linked-server-login-failed-for-user-nt-authorityanonymous-logon?forum=sqldataaccess
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Gather distribution_name stopped with error: Login failed

Similar Messages

Maybe you are looking for