Gathering user info
Using elements 8 and windows 7. When I open Elements, the bar that says gathering user info rolls forever. I have let it run for an hour and it never finishes. Is something missing on my PC? DoI need to reinstall?
The best thing to do is to just skip the unwelcome screen. Go into the program files or, if you have a 64-bit system, program files (x86) and find the actual editor and/or organizer and make desktop shortcut(s). Then use those in the future instead of the welcome screen.
Similar Messages
-
Opening premier elements for first time. Been "gathering user info" for 15 minutes...what to do? Previously hit "organize", ran for 25 min till hit 100%, then "had to close"?
Unfortunately, there's not enough info listed to give you an effective answer.
Can you give more detailed system spec's. There are a lot of differences in RAM, & Hard Drive Technologies. Is your 2TB a single hard drive, or multiple drives in RAID? While a single 2TB drive is nice for the storage capacity, they also sacrifice some performance to reach that capacity... What speed is the RAM, & I'm assuming it's properly opperating in Dual Channel mode (watch your POST screen to be sure). Which Core i7 CPU are you running, & what Operating System are you running. Finally, bring up your task manager, & see what processes are using CPU cycles. Also, are you starting up PrE8 through the default shortcut which uses the Welcome screen?
A quick guess is that Auto Analyzer & the Welcome screen are behind your troubles, but can't be sure till more info is available.
There is a current thread about Auto Analyzer, & I've posted a way to bypass the Welcome screen in several threads.
See my post in this thread to bypass the Welcome screen http://forums.adobe.com/thread/516524 (2nd post in thread)
Message was edited by: chaosdsmFL - added link -
Photoshop elements does not open, says "gathering user info...."
photoshop elements does not open, says "gathering user info...."
Hi,
Please try couple of probable solutions as mentioned below:
Solution 1:
1. Close Elements.
2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
Solution 2: In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
Solution 3: Try launching with anti-virus off or removing PSE from conflicting list.
Solution 4:
On the drive on which you have installed PSE,on my machine it is on C:
Go to C:\Program Files\Adobe\Photoshop Elements 9\Locales\<locale>\Plug-Ins\Import-Exportand you will find twain plug-in. Remove that plug-in from that location and copy it somewhere else.
Now launch PSE and check if it works.
Solution 5: Try with admin account or right click and select run as admin. or try directly from .exe
For related post for Twain please see this:http://forums.adobe.com/message/2954743#2954743
Thanks,
Garry -
I am on Elements 9 and have read a previous entry regarding this problem but to no avail.
I start the Organizer, click on the "Welcome. my name" and I get to input my password.
The only problem is that it is not recognised, so I ask to reset my password.
I get an email from "Photoshop.com" and am able to reset my password. Also receive an email confirming the reset.
I then restart Elements and get the "gathering user info" again. Once I get into the Orgainizer or the Editor my password is not recognised.
What now ?Launch PSe Welcome Screen
Allow 'Gathering Info' to fail.
Sign In again with Adobe Id (user ID) and new password.
- Ankur -
PSE9 on Win7. "Gathering User Info..."
Just installed PSE 9. Installation was successful (on Windows 7 x64). Detected that I'd had PSE 8 before, upgraded my catalog and informed me it was going to migrate all photo tag info. Got into Organizer OK. I exited after awhile.
Now when I start PSE 9, all I get is the Welcome screen with "Gathering User Info...". I left it in this state for 15 minutes. It was not consuming any CPU cycles. Rebooted my PC. Restarted PSE 9. Still just stays on "Gathering User Info...".
Any ideas how to fix this? I'm thinking I may have to try re-install...
ThanksAnkush,
The last thing that I did last night was
1. uninstall PSE9
2. uninstall Adobe Air, Adobe Flash Player IE, Adobe Flash Player
3. install latest Adobe Air and install the lastest Flash Players
4. installed PSE9. I just let it run and the installation completed succesfully (when I checked this morning).
So it looks like uninstalling and reinstalling those other Adobe products allowed the install to complete (instead of failing at the "Installing required Sharing Technlogies" step).
So now I have PSE9 installed.
1. When I clicked the desktop icon to start it, I get the Welcome Screen with the "Gathering User Info..."
2. When I click on Organize, it immediately goes into my Win 7 Taskbar and cannot be resurrected from there. It is still there. I'm not sure if PSE9 is doing anything.
3. Then I run the PhotoshopElementsEditor.exe (from its directory). Editor pops up. It has me signed in. I Sign Out. I sign back in successfully to my account.
I then wonder if, for some reason Organizer has decided to open up somewhere off my screens. I find that that is the case! I drag it back onto onto one of my three screens.
And it's all working
So I had multiple weird things on this installation:
a. "Gathering User Info..." which never went away
b. Multiple PSE9 installations that failed until I reinstalled Air and Flash Players.
c. Had to run PhotoshopElementsEditor.exe from the Adobe directory so that I could get the Adobe sign in dialog
c. Organizer deciding to open up off the screen.
But, as I said, it's working now. I hope that others don't have to attempt as many installs and jump through all these hoops like I did...
I do wonder why the Organizer icon is just showing as a black and white image and the Editor icon is a colored "PSE" image. This is what the two look like in my Win7 Taskbar. Is that the correct Organizer icon?
. . . . Brian -
When attempting to do a Lenov System update, the error message "An error occurred while gathering user information" is displayed.
Upon review the of the tvsu_*.log, it appears there is an issue with the lenovo website when it tries to pull down the following config file:
https://download.lenovo.com/ibmdl/pub/pc/pccbbs/agent/SSClientCommon/HelloLevel_9_12_00.xml
Has anyone else had a similar issue and been able to resolve?
Info 2014-12-16 , 10:26:08
at Tvsu.Engine.Process.HelloProcess.DownloadUDF(String helloClientLevel)
Message: The UDF will be downloaded from: https://download.lenovo.com/ibmdl/pub/pc/pccbbs/agent/SSClientCommon/HelloLevel_9_12_00.xml
Info 2014-12-16 , 10:26:08
at Tvsu.Engine.Process.HelloProcess.DownloadUDF(String helloClientLevel)
Message: The UDF will be downloaded to-> C:\ProgramData\Lenovo\SystemUpdate\session\system\SSClientCommon\HelloLevel_9_12_00.xml
Info 2014-12-16 , 10:26:08
at Tvsukernel.CustomControls.Step.<>c__DisplayClass7.<set_Image>b__6()
Message: Setting PROCESSING status.
Info 2014-12-16 , 10:26:08
at Tvsu.ConnectionSettings.ConnectionSettings.GetConnectionForURL(String url)
Message: Creating a new Connection Settings Bean instance to Host: download.lenovo.com
Info 2014-12-16 , 10:26:08
at Tvt.ConnectionSettings.ConnectionSettings.GetConnectionForURL(String url)
Message: Direct connection found
Info 2014-12-16 , 10:26:08
at Tvsu.FileDownloader.HttpsDownload.GetProxy(ConnectionSettingsBean connBean)
Message: Connection type set to DIRECT in ConnectionSettingsBean
Severe 2014-12-16 , 10:26:08
at Tvsu.FileDownloader.HttpsDownload.Init(FileDownloadInfo fileInfo)
Message: Debug Log: Init method:GET
Severe 2014-12-16 , 10:26:10
at Tvsu.FileDownloader.HttpsDownload.doDownloadByHttps(FileDownloadInfo fileInfo, downloadingDelegate downDelegate)
Message: Debug Log: doDownloadByHttps InterException is null, uri:https://download.lenovo.com/ibmdl/pub/pc/pccbbs/agent/SSClientCommon/HelloLevel_9_12_00.xml
Severe 2014-12-16 , 10:26:10
at Tvsu.FileDownloader.HttpsDownload.doDownloadByHttps(FileDownloadInfo fileInfo, downloadingDelegate downDelegate)
Message: Debug Log doDownloadByHttps webException message:The remote server returned an error: (404) Not Found.
Severe 2014-12-16 , 10:26:10
at Tvsu.FileDownloader.HttpsDownload.doDownloadByHttps(FileDownloadInfo fileInfo, downloadingDelegate downDelegate)
Message: Debug Log server path: https://download.lenovo.com/ibmdl/pub/pc/pccbbs/agent/SSClientCommon/HelloLevel_9_12_00.xml responseStatus:404
Severe 2014-12-16 , 10:26:10
at Tvsu.FileDownloader.HttpsDownload.doDownloadByHttps(FileDownloadInfo fileInfo, downloadingDelegate downDelegate)
Message: Debug Log server path: https://download.lenovo.com/ibmdl/pub/pc/pccbbs/agent/SSClientCommon/HelloLevel_9_12_00.xml webException.StackTrace: at System.Net.HttpWebRequest.GetResponse()
at Tvsu.FileDownloader.HttpsDownload.doDownloadByHttps(FileDownloadInfo fileInfo, downloadingDelegate downDelegate)
Info 2014-12-16 , 10:26:10
at Tvsu.Engine.Process.HelloProcess.Start()
Message: UDF download status is -> Failed
Thanks
KarlHi,
in this situation try following:
open registry:
HKLM\Software\Wow6432Node\Software\Lenovo\System Update\Preferences\UCSettings\RunTime
check if the informations are correct.
In case not, then correct them.
- Try to run TVSU as Administrator (right-click on it and select Run as Administrator)
In case this will be of no use, then just go into the install folder of TVSU and there you will see the folder called "Logs". In there you will for sure find the exact information on what went wrong. Perhaps some proxy config, or just the server was unavailable.
Cheers -
Why is it when I launch Element 9, the window says "gathering user Info"?
The bar on this window continues to spin, but nothing EVER happens. It never really shows me any user information. Not sure what this is even supposed to do since it never works.
No, I mean you can log out until you are in PSE, then log in if you want to be connected. Or stop syncing before you launch PSE. Usually once you've eliminated the hung connection attempt it will work okay until the servers go weird again.
BTW, you seem to think I work for adobe. I don't. -
Why won't PE9 load up user info?
I'm having problems getting PE9 to load up. The gathering user info bar never changes. It just keeps "gathering". If I click on the new or open project buttons it takes 5 minutes to load if it loads at all. I uninstalled PE9 and re-installed it. Still having the same problems. Do I need to manually put my user info in?
One likely cause of issues would be an update/hot-fix to Vista (do you have those set to the default of automatic?) breaking your video (and/or audio) drivers. Per the suggestions in that linked article, I would update both from their mfgr's. Web sites. Do not trust Windows, or any utility to tell you if you have the very latest drivers. Those recommendations will probably be 6 mos. out of date, and of little to no use.
If nothing in that article helps, then I suggest posting the full system specs., as outlined in this ARTICLE.
Good luck,
Hunt -
Gathering User Information Freezes
When starting "C:\Program Files\Adobe\Elements 9 Organizer\Photoshop Elements 9.0.exe" the software brings up a "Welcome to Adobe Photoshop Elements 9" startup screen. It gives me the option to Organize or Edit. It also starts to gather user information related to my on-line photo storage archive.
Up until recently the "Gathering User Info..." process completed in a few seconds. Now it searches "forever" without retrieving any information.
Any suggestions/solutions?
Thank you.Open Full Edit. Click on “Welcome, your name” on the menu bar then sign out.
Then log back in again.
That usually works.
You may need to double click on the file - PhotoshopElementsEditor.exe - to launch it directly.
You will find it in the Program Files folder or program files (x86) on 64 bit systems. -
I have issues with SU with my Lenovo t61p
Win8Pro x64
[Lenovo System Update build: 2013-4-11 5.02.0011] 29.4.2013 1:31:43
Info 2013-04-29 , 01:31:43
at Tvsu.Environment.EnvironmentManager..ctor()
Message: Starting Environment Manager...
Info 2013-04-29 , 01:31:43
at Tvsu.Nls.NlsResources..ctor()
Message: Starting the instance of NLS@Runtime
Info 2013-04-29 , 01:31:44
at Tvsu.Nls.NlsResources..ctor()
Message:
The active language is: EN
The default language is: EN
The OS language is: EN
The language loaded type is: OS
Info 2013-04-29 , 01:31:44
at Tvsu.Commonscheduler.SchedulerManager.Save()
Message: Scheduler Manager Starts...
Info 2013-04-29 , 01:31:44
at Tvsu.Commonscheduler.SchedulerManager.Save()
Message: Obtaining information from the Enviroment Manager...
Info 2013-04-29 , 01:31:44
at Tvsu.Commonscheduler.SchedulerManager.Save()
Message: Validating Starts...
Info 2013-04-29 , 01:31:44
at Tvsu.Commonscheduler.SchedulerManager.Save()
Message: Validating Ends...
Info 2013-04-29 , 01:31:44
at Tvsu.Commonscheduler.SchedulerManager.Save()
Message: Sending Values to the SchedulerParser...
Info 2013-04-29 , 01:31:44
at Tvt.Commonscheduler.SchedulerParser.SetValues(String v_ScheduleMode, String v_ScheduleDayOfTheMonth, String v_ScheduleDayOfTheWeek, String v_ScheduleHour, String v_ScheduleMinute, String scheduleSecond, String v_NumMinutes, String v_wakeFromSuspendHibernate, String v_Pre, String v_PreParameters, String v_PreShow, String v_Post, String v_PostParameters, String v_PostShow, String v_Task, String v_TaskParameter, String v_TaskShow, String v_CPUPriority, String v_minDaysBetweenExecution, String v_lastRunTimeHigh, String v_lastRunTimeLow, String v_nextRunTimeHigh, String v_nextRunTimeLow, String v_preRunAsUser, String v_runAsUser, String v_postRunAsUser, String v_schedulerAbility, String v_schedulerPath)
Message: Scheduler Parser - Receiving Values from the SchedulerManager
Info 2013-04-29 , 01:31:44
at Tvt.Commonscheduler.SchedulerParser.SetValues(String v_ScheduleMode, String v_ScheduleDayOfTheMonth, String v_ScheduleDayOfTheWeek, String v_ScheduleHour, String v_ScheduleMinute, String scheduleSecond, String v_NumMinutes, String v_wakeFromSuspendHibernate, String v_Pre, String v_PreParameters, String v_PreShow, String v_Post, String v_PostParameters, String v_PostShow, String v_Task, String v_TaskParameter, String v_TaskShow, String v_CPUPriority, String v_minDaysBetweenExecution, String v_lastRunTimeHigh, String v_lastRunTimeLow, String v_nextRunTimeHigh, String v_nextRunTimeLow, String v_preRunAsUser, String v_runAsUser, String v_postRunAsUser, String v_schedulerAbility, String v_schedulerPath)
Message: Scheduler Parser - Starting Validation Process!
Info 2013-04-29 , 01:31:44
at Tvt.Commonscheduler.SchedulerParser.SetValues(String v_ScheduleMode, String v_ScheduleDayOfTheMonth, String v_ScheduleDayOfTheWeek, String v_ScheduleHour, String v_ScheduleMinute, String scheduleSecond, String v_NumMinutes, String v_wakeFromSuspendHibernate, String v_Pre, String v_PreParameters, String v_PreShow, String v_Post, String v_PostParameters, String v_PostShow, String v_Task, String v_TaskParameter, String v_TaskShow, String v_CPUPriority, String v_minDaysBetweenExecution, String v_lastRunTimeHigh, String v_lastRunTimeLow, String v_nextRunTimeHigh, String v_nextRunTimeLow, String v_preRunAsUser, String v_runAsUser, String v_postRunAsUser, String v_schedulerAbility, String v_schedulerPath)
Message: Scheduler Parser - All validations have been processed!
Info 2013-04-29 , 01:31:44
at Tvt.Commonscheduler.SchedulerParser.SetValues(String v_ScheduleMode, String v_ScheduleDayOfTheMonth, String v_ScheduleDayOfTheWeek, String v_ScheduleHour, String v_ScheduleMinute, String scheduleSecond, String v_NumMinutes, String v_wakeFromSuspendHibernate, String v_Pre, String v_PreParameters, String v_PreShow, String v_Post, String v_PostParameters, String v_PostShow, String v_Task, String v_TaskParameter, String v_TaskShow, String v_CPUPriority, String v_minDaysBetweenExecution, String v_lastRunTimeHigh, String v_lastRunTimeLow, String v_nextRunTimeHigh, String v_nextRunTimeLow, String v_preRunAsUser, String v_runAsUser, String v_postRunAsUser, String v_schedulerAbility, String v_schedulerPath)
Message: Scheduler Parser - Writting to the registry...
Info 2013-04-29 , 01:31:44
at Tvt.Commonscheduler.SchedulerParser.SetValues(String v_ScheduleMode, String v_ScheduleDayOfTheMonth, String v_ScheduleDayOfTheWeek, String v_ScheduleHour, String v_ScheduleMinute, String scheduleSecond, String v_NumMinutes, String v_wakeFromSuspendHibernate, String v_Pre, String v_PreParameters, String v_PreShow, String v_Post, String v_PostParameters, String v_PostShow, String v_Task, String v_TaskParameter, String v_TaskShow, String v_CPUPriority, String v_minDaysBetweenExecution, String v_lastRunTimeHigh, String v_lastRunTimeLow, String v_nextRunTimeHigh, String v_nextRunTimeLow, String v_preRunAsUser, String v_runAsUser, String v_postRunAsUser, String v_schedulerAbility, String v_schedulerPath)
Message: Scheduler Parser - All values were saved on the Registry!
Info 2013-04-29 , 01:31:44
at Tvt.Commonscheduler.SchedulerParser.SetValues(String v_ScheduleMode, String v_ScheduleDayOfTheMonth, String v_ScheduleDayOfTheWeek, String v_ScheduleHour, String v_ScheduleMinute, String scheduleSecond, String v_NumMinutes, String v_wakeFromSuspendHibernate, String v_Pre, String v_PreParameters, String v_PreShow, String v_Post, String v_PostParameters, String v_PostShow, String v_Task, String v_TaskParameter, String v_TaskShow, String v_CPUPriority, String v_minDaysBetweenExecution, String v_lastRunTimeHigh, String v_lastRunTimeLow, String v_nextRunTimeHigh, String v_nextRunTimeLow, String v_preRunAsUser, String v_runAsUser, String v_postRunAsUser, String v_schedulerAbility, String v_schedulerPath)
Message: Scheduler Parser - Reloading Scheduler
Info 2013-04-29 , 01:31:44
at Tvt.Commonscheduler.SchedulerParser.SetValues(String v_ScheduleMode, String v_ScheduleDayOfTheMonth, String v_ScheduleDayOfTheWeek, String v_ScheduleHour, String v_ScheduleMinute, String scheduleSecond, String v_NumMinutes, String v_wakeFromSuspendHibernate, String v_Pre, String v_PreParameters, String v_PreShow, String v_Post, String v_PostParameters, String v_PostShow, String v_Task, String v_TaskParameter, String v_TaskShow, String v_CPUPriority, String v_minDaysBetweenExecution, String v_lastRunTimeHigh, String v_lastRunTimeLow, String v_nextRunTimeHigh, String v_nextRunTimeLow, String v_preRunAsUser, String v_runAsUser, String v_postRunAsUser, String v_schedulerAbility, String v_schedulerPath)
Message: Scheduler Parser - The Scheduler was reloaded
Info 2013-04-29 , 01:31:44
at Tvsu.Commonscheduler.SchedulerManager.Save()
Message: All values sent to SchedulerParser...
Info 2013-04-29 , 01:31:44
at Tvsu.Commonscheduler.SchedulerManager.Save()
Message: Scheduler Manager ends...
Severe 2013-04-29 , 01:31:44
at Tvsu.Sdk.SuSdk.StartApplication()
Message: Application runs with the framework: 2.0.50727.6400
Info 2013-04-29 , 01:31:44
at Tvsu.Engine.DataBase.InitializeDataBase()
Message: Initializing the DataBase from file: updates.ser
Info 2013-04-29 , 01:31:44
at Tvsu.Sdk.SuSdk.StartApplication()
Message: Starting the Application
Info 2013-04-29 , 01:31:44
at Tvsukernel.Logic.GUIController.StartGUI(Boolean showsplash)
Message: Starting GUI...
Info 2013-04-29 , 01:31:44
at Tvsukernel.Logic.GUIController.StartGUI(Boolean showsplash)
Message: MainFrame created successfully
Info 2013-04-29 , 01:31:44
at Tvsukernel.Logic.GUIController.StartGUI(Boolean showsplash)
Message: GUI -- Welcome screen
Info 2013-04-29 , 01:31:44
at Tvsukernel.Logic.GUIController.BackToMain()
Message: Setting Welcome screen...
Info 2013-04-29 , 01:31:44
at Tvsukernel.FlowScreens.MainFrame.SetScreen(String screen, RoutedEventHandler[] eh)
Message: Loading Welcome screen on Action pane.
Info 2013-04-29 , 01:31:49
at Tvsukernel.Logic.GUIController.SearchUpdates(Object sender, EventArgs args)
Message: Starting the Search process...
Info 2013-04-29 , 01:31:49
at Tvsukernel.FlowScreens.MainFrame.SetScreen(String screen, RoutedEventHandler[] eh)
Message: Loading Search screen on Action pane.
Info 2013-04-29 , 01:31:49
at Tvsukernel.Logic.ProgressThread.InitSearch()
Message: GUI -- Reporting progress for the Search
Info 2013-04-29 , 01:31:49
at Tvsu.Sdk.SuSdk.GetSystemProperties()
Message: Get the System Properties
Info 2013-04-29 , 01:31:49
at Tvsu.Engine.Task.Task.StartExecution()
Message: PreTask
Info 2013-04-29 , 01:31:49
at Tvsu.Engine.Task.Task.StartExecution()
Message: Start
Info 2013-04-29 , 01:31:49
at Tvsu.Engine.Task.Task.Start()
Message: Starting the task
Info 2013-04-29 , 01:31:49
at Tvsu.Engine.Task.Task.Start()
Message: The current process is:HelloProcess
Info 2013-04-29 , 01:31:49
at Tvsu.Engine.Task.Task.Start()
Message: Executing the PreProcess HelloProcess
Info 2013-04-29 , 01:31:49
at Tvsu.Engine.Task.Task.Start()
Message: Executing the StartProcess HelloProcess
Info 2013-04-29 , 01:31:49
at Tvsu.Engine.Process.HelloProcess.DownloadHelpFile()
Message: The chm help file is already present in the system
Info 2013-04-29 , 01:31:49
at Tvsu.Engine.Process.HelloProcess.Start()
Message: The test.properties file was not found, the normal Hello process will continue.
Info 2013-04-29 , 01:31:49
at Tvsu.Engine.Process.HelloProcess.Start()
Message: HelloProcess Started
Info 2013-04-29 , 01:31:49
at Tvsu.Engine.Process.HelloProcess.Start()
Message: Client level: HelloLevel_9_03_00
Info 2013-04-29 , 01:31:49
at Tvsu.Engine.Process.HelloProcess.DownloadUDF(String helloClientLevel)
Message: The UDF will be downloaded from: https://download.lenovo.com/ibmdl/pub/pc/pccbbs/agent/SSClientCommon/HelloLevel_9_03_00.xml
Info 2013-04-29 , 01:31:49
at Tvsu.Engine.Process.HelloProcess.DownloadUDF(String helloClientLevel)
Message: The UDF will be downloaded to-> C:\ProgramData\Lenovo\SystemUpdate\session\system\SSClientCommon\HelloLevel_9_03_00.xml
Info 2013-04-29 , 01:31:49
at Tvsu.ConnectionSettings.ConnectionSettings.GetConnectionForURL(String url)
Message: Creating a new Connection Settings Bean instance to Host: download.lenovo.com
Info 2013-04-29 , 01:31:49
at Tvt.ConnectionSettings.ConnectionSettings.GetConnectionForURL(String url)
Message: Direct connection found
Info 2013-04-29 , 01:31:49
at Tvsukernel.CustomControls.Step.<>c__DisplayClass7.<set_Image>b__6()
Message: Setting PROCESSING status.
Info 2013-04-29 , 01:31:49
at Tvsu.FileDownloader.HttpsDownload.SetCertificates()
Message: Setting certificates...
Info 2013-04-29 , 01:31:50
at Tvsu.FileDownloader.HttpsDownload.GetProxy(ConnectionSettingsBean connBean)
Message: Connection type set to DIRECT in ConnectionSettingsBean
Severe 2013-04-29 , 01:31:50
at Tvsu.FileDownloader.HttpsDownload.Init(FileDownloadInfo fileInfo)
Message: Debug Log: Init method:GET
Severe 2013-04-29 , 01:31:52
at Tvsu.FileDownloader.HttpsDownload.doDownloadByHttps(FileDownloadInfo fileInfo, downloadingDelegate downDelegate)
Message: Debug Log: doDownloadByHttps InterException is null, uri:https://download.lenovo.com/ibmdl/pub/pc/pccbbs/agent/SSClientCommon/HelloLevel_9_03_00.xml
Severe 2013-04-29 , 01:31:52
at Tvsu.FileDownloader.HttpsDownload.doDownloadByHttps(FileDownloadInfo fileInfo, downloadingDelegate downDelegate)
Message: Debug Log doDownloadByHttps webException message:The remote server returned an error: (404) Not Found.
Severe 2013-04-29 , 01:31:52
at Tvsu.FileDownloader.HttpsDownload.doDownloadByHttps(FileDownloadInfo fileInfo, downloadingDelegate downDelegate)
Message: Debug Log server path: https://download.lenovo.com/ibmdl/pub/pc/pccbbs/agent/SSClientCommon/HelloLevel_9_03_00.xml responseStatus:404
Severe 2013-04-29 , 01:31:52
at Tvsu.FileDownloader.HttpsDownload.doDownloadByHttps(FileDownloadInfo fileInfo, downloadingDelegate downDelegate)
Message: Debug Log server path: https://download.lenovo.com/ibmdl/pub/pc/pccbbs/agent/SSClientCommon/HelloLevel_9_03_00.xml webException.StackTrace: at System.Net.HttpWebRequest.GetResponse()
at Tvsu.FileDownloader.HttpsDownload.doDownloadByHttps(FileDownloadInfo fileInfo, downloadingDelegate downDelegate)
Info 2013-04-29 , 01:31:52
at Tvsu.Engine.Process.HelloProcess.Start()
Message: UDF download status is -> Failed
Severe 2013-04-29 , 01:31:52
at Tvsu.Engine.Process.HelloProcess.Start()
Message: Could't connect to the HelloServer, no UDF file was downloaded
Info 2013-04-29 , 01:31:52
at Tvsu.Egather.EgatherManager.GetEgatherParser(String type)
Message: Running egather minimal.....
Info 2013-04-29 , 01:31:52
at Tvsu.Egather.EgatherExecutor.RunAsWindowsService(String directory, String command, String arguments)
Message: /execute ia.exe /arguments -filename"""C:\Program Files (x86)\Lenovo\System Update\egather\sysrecomin""" -probes REGIONAL_SETTINGS GATHERER_INFORMATION SYSTEM_SUMMARY -local /directory C:\Program Files (x86)\Lenovo\System Update\egather\ /type COMMAND /timeout 300000
Info 2013-04-29 , 01:31:52
at Tvsu.Egather.EgatherExecutor.RunAsWindowsService(String directory, String command, String arguments)
Message: FileName Path: C:\Program Files (x86)\Lenovo\System Update\TvsuCommandLauncher.exe
Info 2013-04-29 , 01:31:53
at Tvsu.Egather.EgatherExecutor.ExecuteEgather(String fileOutput, String args)
Message: RC eGatherer: 0
Info 2013-04-29 , 01:31:53
at Tvsu.Engine.Process.HelloProcess.Start()
Message: MTM received from eGather: 6458BS9
Severe 2013-04-29 , 01:31:53
at Tvsu.Engine.Process.HelloProcess.Start()
Message: An error ocurred while using the MappingParser
Exception:
Message: There is not entry for the key SRM
Type: System.NullReferenceException
at Tvt.Mapping.Languages.get_Item(String tla)
at Tvsu.Engine.Process.HelloProcess.Start()
Severe 2013-04-29 , 01:31:53
at Tvsu.Engine.Process.HelloProcess.Start()
Message: A value could not be mapped when using the MappingParser or eGather execution failed
Exception:
Message: Error getting MappingParser properties
Type: Tvsu.Engine.Process.MappingInterfaceException
at Tvsu.Engine.Process.HelloProcess.Start()
Severe 2013-04-29 , 01:31:53
at Tvsu.Engine.Task.Task.StartExecution()
Message: An error occurred while the task: HelloTask executed the process: HelloProcessthe message from exception isA fatal error ocurred while in the HelloProcess
Exception:
Message: A fatal error ocurred while in the HelloProcess
Type: Tvsu.Engine.Process.HelloProcessException
at Tvsu.Engine.Task.Task.Start()
at Tvsu.Engine.Task.Task.StartExecution()
Info 2013-04-29 , 01:31:53
at Tvsukernel.CustomControls.Step.<>c__DisplayClass7.<set_Image>b__6()
Message: Setting FAILED status.
Info 2013-04-29 , 01:31:53
at Tvsukernel.Logic.GUIController.ShowErrorMessage(Exception e)
Message: Error while gathering user information.
Exception:
Message: A fatal error ocurred while in the HelloProcess
Type: Tvsu.Engine.Process.HelloProcessException
at Tvsu.Engine.Task.Task.StartExecution()
at Tvsu.Sdk.SuSdk.GetSystemProperties()
at Tvsukernel.Logic.ProgressThread.InitSearch()
Info 2013-04-29 , 01:31:53
at Tvsukernel.Dialogs.Messages.ShowStaticMessage(String message, String title, MessageType t, Boolean check)
Message: Showing ERROR Message: < An error occurred while gathering user information. >
Info 2013-04-29 , 01:31:55
at Tvsukernel.Logic.GUIController.BackToMain()
Message: Setting Welcome screen...
Info 2013-04-29 , 01:31:55
at Tvsukernel.FlowScreens.MainFrame.SetScreen(String screen, RoutedEventHandler[] eh)
Message: Loading Welcome screen on Action pane.
Info 2013-04-29 , 01:31:57
at Tvsukernel.Logic.GUIController.AskBeforeClosing()
Message: Close System Update?
Info 2013-04-29 , 01:31:57
at Tvsukernel.Dialogs.Messages.ShowStaticMessage(String message, String title, MessageType t, Boolean check)
Message: Showing QUESTION Message: < Are you sure you want to close System Update? >
Info 2013-04-29 , 01:31:59
at Tvsukernel.Logic.GUIController.AskBeforeClosing()
Message: Application will close now? True
Info 2013-04-29 , 01:31:59
at Tvsukernel.FlowScreens.MainFrame.OnClosing(CancelEventArgs e)
Message: User wanted to close System Update, or the package force a reboot.
Severe 2013-04-29 , 01:31:59
at Tvsu.Sdk.SuSdk.ShutDownApplication()
Message: Has happened an exception while the UNCAuthenticator.Shutdown() was executedShare name can not be null or empty
Info 2013-04-29 , 01:31:59
at Tvsu.Engine.DataBase.ShutDownDataBase()
Message: Shutting down the DataBase, saving any data into file: updates.ser
Info 2013-04-29 , 01:31:59
at Tvsu.Environment.EnvironmentManager.closeEM()
Message: Closing Environment Manager.
Info 2013-04-29 , 01:31:59
at Tvsu.Sdk.SuSdk.ShutDownApplication()
Message: Shut Down the ApplicationYou have win8. Have you ever had an earlier version of SU , ie when you booted up the 1st time (did it work).
Run windows update and make sure .netframework is current.
Did you upgrade from win 7? -
System Update error "An error occurred while gathering user informatio​n"
I honestly think that i'm never going to stop running into issues with Lenovos software....
Anyways, i've reinstalled countless times trying every way to fix things and nothing works. I will post my log for others to look at and hopefully help me out.
[Lenovo System Update build: 2015-01-15 5.06.0027] 3/4/2015 5:58:34 PM
Info 2015-03-04 , 05:58:34
at Tvsu.Environment.EnvironmentManager..ctor()
Message: Starting Environment Manager...
Info 2015-03-04 , 05:58:36
at Tvsu.Nls.NlsResources..ctor()
Message: Starting the instance of NLS@Runtime
Info 2015-03-04 , 05:58:36
at Tvsu.Nls.NlsResources..ctor()
Message:
The active language is: EN
The default language is: EN
The OS language is: EN
The language loaded type is: OS
Severe 2015-03-04 , 05:58:36
at Tvsu.Sdk.SuSdk.StartApplication()
Message: Application runs with the framework: 4.0.30319.34209
Info 2015-03-04 , 05:58:36
at Tvsu.Engine.DataBase.InitializeDataBase()
Message: Initializing the DataBase from file: updates.ser
Info 2015-03-04 , 05:58:36
at Tvsu.Sdk.SuSdk.StartApplication()
Message: Starting the Application
Info 2015-03-04 , 05:58:36
at Tvsukernel.Logic.GUIController.StartGUI(Boolean showsplash)
Message: Starting GUI...
Info 2015-03-04 , 05:58:36
at Tvsukernel.Logic.GUIController.StartGUI(Boolean showsplash)
Message: MainFrame created successfully
Info 2015-03-04 , 05:58:36
at Tvsukernel.Logic.GUIController.StartGUI(Boolean showsplash)
Message: GUI -- Welcome screen
Info 2015-03-04 , 05:58:36
at Tvsukernel.Logic.GUIController.BackToMain()
Message: Setting Welcome screen...
Info 2015-03-04 , 05:58:36
at Tvsukernel.FlowScreens.MainFrame.SetScreen(String screen, RoutedEventHandler[] eh)
Message: Loading Welcome screen on Action pane.
Info 2015-03-04 , 05:58:39
at Tvsukernel.Logic.GUIController.SearchUpdates(Object sender, EventArgs args)
Message: Starting the Search process...
Info 2015-03-04 , 05:58:39
at Tvsukernel.FlowScreens.MainFrame.SetScreen(String screen, RoutedEventHandler[] eh)
Message: Loading Search screen on Action pane.
Info 2015-03-04 , 05:58:39
at Tvsukernel.Logic.ProgressThread.InitSearch()
Message: GUI -- Reporting progress for the Search
Info 2015-03-04 , 05:58:39
at Tvsu.Sdk.SuSdk.GetSystemProperties()
Message: Get the System Properties
Info 2015-03-04 , 05:58:39
at Tvsu.Engine.Task.Task.StartExecution()
Message: PreTask
Info 2015-03-04 , 05:58:39
at Tvsu.Engine.Task.Task.StartExecution()
Message: Start
Info 2015-03-04 , 05:58:39
at Tvsu.Engine.Task.Task.Start()
Message: Starting the task
Info 2015-03-04 , 05:58:39
at Tvsu.Engine.Task.Task.Start()
Message: The current process is:HelloProcess
Info 2015-03-04 , 05:58:39
at Tvsu.Engine.Task.Task.Start()
Message: Executing the PreProcess HelloProcess
Info 2015-03-04 , 05:58:39
at Tvsu.Engine.Task.Task.Start()
Message: Executing the StartProcess HelloProcess
Info 2015-03-04 , 05:58:39
at Tvsu.Engine.Process.HelloProcess.DownloadHelpFile()
Message: The chm help file is already present in the system
Info 2015-03-04 , 05:58:39
at Tvsu.Engine.Process.HelloProcess.Start()
Message: The test.properties file was not found, the normal Hello process will continue.
Info 2015-03-04 , 05:58:39
at Tvsu.Engine.Process.HelloProcess.Start()
Message: HelloProcess Started
Info 2015-03-04 , 05:58:39
at Tvsu.Engine.Process.HelloProcess.Start()
Message: Client level: HelloLevel_9_14_00
Info 2015-03-04 , 05:58:39
at Tvsu.Engine.Process.HelloProcess.DownloadUDF(String helloClientLevel)
Message: The UDF will be downloaded from: https://download.lenovo.com/ibmdl/pub/pc/pccbbs/agent/SSClientCommon/HelloLevel_9_14_00.xml
Info 2015-03-04 , 05:58:39
at Tvsu.Engine.Process.HelloProcess.DownloadUDF(String helloClientLevel)
Message: The UDF will be downloaded to-> C:\ProgramData\Lenovo\SystemUpdate\session\system\SSClientCommon\HelloLevel_9_14_00.xml
Info 2015-03-04 , 05:58:39
at Tvsu.ConnectionSettings.ConnectionSettings.GetConnectionForURL(String url)
Message: Creating a new Connection Settings Bean instance to Host: download.lenovo.com
Info 2015-03-04 , 05:58:39
at Tvsukernel.CustomControls.Step.<>c__DisplayClass7.<set_Image>b__6()
Message: Setting PROCESSING status.
Info 2015-03-04 , 05:58:39
at Tvt.ConnectionSettings.ConnectionSettings.GetConnectionForURL(String url)
Message: Direct connection found
Info 2015-03-04 , 05:58:39
at Tvsu.FileDownloader.HttpsDownload.GetProxy(ConnectionSettingsBean connBean)
Message: Connection type set to DIRECT in ConnectionSettingsBean
Severe 2015-03-04 , 05:58:39
at Tvsu.FileDownloader.HttpsDownload.Init(FileDownloadInfo fileInfo)
Message: Debug Log: Init method:GET
Info 2015-03-04 , 05:58:39
at Tvsu.Engine.Process.HelloProcess.Start()
Message: UDF download status is -> Downloaded
Info 2015-03-04 , 05:58:39
at Tvsu.Engine.Process.HelloProcess.ParseUDF(String udfPath)
Message: Parsing the UDF file
Severe 2015-03-04 , 05:58:39
at Tvsu.Engine.Process.HelloProcess.Start()
Message: Error reading C:\ProgramData\Lenovo\SystemUpdate\session\system\SSClientCommon\HelloLevel_9_14_00.xml, this XML file is not well-formed
Exception:
Message: Root element is missing.
Type: System.Xml.XmlException
at System.Xml.XmlTextReaderImpl.Throw(Exception e)
at System.Xml.XmlTextReaderImpl.ParseDocumentContent()
at System.Xml.XmlTextReaderImpl.Read()
at System.Xml.XPath.XPathDocument.LoadFromReader(XmlReader reader, XmlSpace space)
at System.Xml.XPath.XPathDocument..ctor(TextReader textReader)
at Tvsu.Engine.Process.HelloProcess.ParseUDF(String udfPath)
at Tvsu.Engine.Process.HelloProcess.Start()
Info 2015-03-04 , 05:58:39
at Tvsu.Egather.EgatherManager.GetEgatherParser(String type)
Message: Running egather minimal.....
Info 2015-03-04 , 05:58:39
at Tvsu.Egather.EgatherExecutor.RunAsWindowsService(String directory, String command, String arguments)
Message: /execute ia.exe /arguments -filename$C:\Program Files (x86)\Lenovo\System Update\egather\sysrecomin$ -probes REGIONAL_SETTINGS GATHERER_INFORMATION SYSTEM_SUMMARY -local /directory $C:\Program Files (x86)\Lenovo\System Update\egather\$ /type COMMAND /securitycode a7db21fdc747d5e6f213b2b4c6632dc5dbfe5162 /timeout 300000
Info 2015-03-04 , 05:58:39
at Tvsu.Egather.EgatherExecutor.RunAsWindowsService(String directory, String command, String arguments)
Message: FileName Path: C:\Program Files (x86)\Lenovo\System Update\TvsuCommandLauncher.exe
Info 2015-03-04 , 05:58:39
at Tvsu.Egather.EgatherExecutor.ExecuteEgather(String fileOutput, String args)
Message: RC eGatherer: 0
Severe 2015-03-04 , 05:58:39
at Tvsu.Egather.EgatherManager.GetEgatherParser(String type)
Message: Unable to execute egather
Severe 2015-03-04 , 05:58:39
at Tvsu.Engine.Process.HelloProcess.Start()
Message: Error getting the Egather parser
Exception:
Message: Could not find file 'C:\Program Files (x86)\Lenovo\System Update\egather\sysrecomin.XML'.
Type: System.IO.FileNotFoundException
at Tvsu.Egather.EgatherManager.GetEgatherParser(String type)
at Tvsu.Egather.EgatherManager.get_EgatherMinimal()
at Tvsu.Engine.Process.HelloProcess.Start()
Severe 2015-03-04 , 05:58:39
at Tvsu.Engine.Task.Task.StartExecution()
Message: An error occurred while the task: HelloTask executed the process: HelloProcessthe message from exception isError getting the Egather parser
Exception:
Message: Error getting the Egather parser
Type: Tvsu.Engine.Process.EgatherException
at Tvsu.Engine.Task.Task.Start()
at Tvsu.Engine.Task.Task.StartExecution()
Info 2015-03-04 , 05:58:39
at Tvsukernel.CustomControls.Step.<>c__DisplayClass7.<set_Image>b__6()
Message: Setting FAILED status.
Info 2015-03-04 , 05:58:39
at Tvsukernel.Logic.GUIController.ShowErrorMessage(Exception e)
Message: Error while gathering user information.
Exception:
Message: Error getting the Egather parser
Type: Tvsu.Engine.Process.EgatherException
at Tvsu.Engine.Task.Task.StartExecution()
at Tvsu.Sdk.SuSdk.GetSystemProperties()
at Tvsukernel.Logic.ProgressThread.InitSearch()
Info 2015-03-04 , 05:58:39
at Tvsukernel.Dialogs.Messages.ShowStaticMessage(String message, String title, MessageType t, Boolean check)
Message: Showing ERROR Message: < An error occurred while gathering user information. >
Info 2015-03-04 , 05:58:41
at Tvsukernel.Logic.GUIController.BackToMain()
Message: Setting Welcome screen...
Info 2015-03-04 , 05:58:41
at Tvsukernel.FlowScreens.MainFrame.SetScreen(String screen, RoutedEventHandler[] eh)
Message: Loading Welcome screen on Action pane.
Info 2015-03-04 , 05:58:41
at Tvsukernel.Logic.GUIController.AskBeforeClosing()
Message: Close System Update?
Info 2015-03-04 , 05:58:41
at Tvsukernel.Dialogs.Messages.ShowStaticMessage(String message, String title, MessageType t, Boolean check)
Message: Showing QUESTION Message: < Are you sure you want to close System Update? >
Info 2015-03-04 , 05:58:42
at Tvsukernel.Logic.GUIController.AskBeforeClosing()
Message: Application will close now? True
Info 2015-03-04 , 05:58:42
at Tvsukernel.FlowScreens.MainFrame.OnClosing(CancelEventArgs e)
Message: User wanted to close System Update, or the package force a reboot.
Severe 2015-03-04 , 05:58:42
at Tvsu.Sdk.SuSdk.ShutDownApplication()
Message: Has happened an exception while the UNCAuthenticator.Shutdown() was executedShare name can not be null or empty
Info 2015-03-04 , 05:58:42
at Tvsu.Engine.DataBase.ShutDownDataBase()
Message: Shutting down the DataBase, saving any data into file: updates.ser
Info 2015-03-04 , 05:58:42
at Tvsu.Environment.EnvironmentManager.closeEM()
Message: Closing Environment Manager.
Info 2015-03-04 , 05:58:43
at Tvsu.Sdk.SuSdk.ShutDownApplication()
Message: Shut Down the Application
One thing I noticed is that if I visit the download link for the HelloLevel_9_14_00.xml here: https://download.lenovo.com/ibmdl/pub/pc/pccbbs/agent/SSClientCommon/HelloLevel_9_14_00.xml
It shows up completely blank but everything HelloLevel_9_13_00.xml and < shows up fine for me. It appears this is the same issue the log is reporting saying that "this XML file is not well-formed" could this be a Lenovo issue though? No one else has reported this exact problem though so I guess not.
My model is a Thinkpad Edge E540 (20C6008SUS) with Windows 8.1
Solved!
Go to Solution.The hello level 9_14 is expected behavior. The link is currently set blanks. Down the road, when a newer version of SU is available, and Lenovo wants SU to self update, this link will contain the self update information.
As you saw, hello level9_13 contains data.
My notes:
systemupdate506-01-15-2015.exe System Update 5.06.0027 hl=14 (02/05/2015)
systemupdate506-11-04-2014.exe System Update 5.06.0024 hl=13 (11/24/2014)
>>>> users of SU 5.6.0024 , which is hello level 13, will be offered self update of SU to the current release.
====
Your failure is here:
Info 2015-03-04 , 05:58:39
at Tvsu.Egather.EgatherExecutor.RunAsWindowsService(String directory, String command, String arguments)
Message: FileName Path: C:\Program Files (x86)\Lenovo\System Update\TvsuCommandLauncher.exe
Info 2015-03-04 , 05:58:39
at Tvsu.Egather.EgatherExecutor.ExecuteEgather(String fileOutput, String args)
Message: RC eGatherer: 0
Severe 2015-03-04 , 05:58:39
at Tvsu.Egather.EgatherManager.GetEgatherParser(String type)
Message: Unable to execute egather
Severe 2015-03-04 , 05:58:39
at Tvsu.Engine.Process.HelloProcess.Start()
Message: Error getting the Egather parser
Exception:
Message: Could not find file 'C:\Program Files (x86)\Lenovo\System Update\egather\sysrecomin.XML'
================
SU runs ia.exe(inventory agent) via tvsucommandlauncher via the SU service in windows services.
Expected output is the creation of two XML's:
'C:\Program Files (x86)\Lenovo\System Update\egather\sysrecomin.XML'
'C:\Program Files (x86)\Lenovo\System Update\egather\sysreco.XML'
These two .xmls contain information about your system such as machine type and model.
This message stated:
Message: RC eGatherer: 0
I dont think ia.exec ever got executed.
===
In c\programdata\lenovo\systemupdate\logs
Post
tvsu_exec.log
Tvsucommandlauncher.log
service.log (inside the SUservice logs folder).
Go into windows services, and find entry name System Update and make sure it is set to start type=manual..
==
DId your system ship from the factory with System Update installed?
Have you ever run a prior release of SU on your system with success, or is this your first time using Su on your system? -
TVSU "an error occurred while gathering user information"
I am getting this error on E20 4220CTO. I was told by tech support one/some of the windows files were bad and that was why it didn't run. I don't believe that response as everything else works just fine--except TVSU--and the tech gave me no idea which windows files might be bad. I am running version 4.03.0012. Is there any fix out there?? I do not manually update the registry.But I have run a registry cleaner and reinstalled latest verion of TVSU same problems. I also did a windows repair on NetFramework 4.0. I am running Win7-SP1 64-bit. I understand there is a beta Ver. 5 out for TVSU, if yes, where can I get it???? Or is there a different fix? I have checked the mapping interface.xml file and my version of Windows appears correctly there. Any help would be appreciated.
OS was preinstalled Win 7-64 bit but I have updated monthly when MS issues new releases. Copy of log file below:
[ThinkVantage System Update build: 2012-5-11 4.03.0012] 6/19/2012 8:08:14 PM
Info 2012-06-19 , 08:08:15 at Tvsu.Environment.EnvironmentManager..ctor() Message: Starting Environment Manager...
Info 2012-06-19 , 08:08:15 at Tvsu.Nls.NlsResources..ctor() Message: Starting the instance of NLS@Runtime
Info 2012-06-19 , 08:08:15 at Tvsu.Nls.NlsResources..ctor() Message: The active language is: EN The default language is: EN The OS language is: EN The language loaded type is: OS
Info 2012-06-19 , 08:08:15 at Tvsu.Commonscheduler.SchedulerManager.Save() Message: Scheduler Manager Starts...
Info 2012-06-19 , 08:08:15 at Tvsu.Commonscheduler.SchedulerManager.Save() Message: Obtaining information from the Enviroment Manager...
Info 2012-06-19 , 08:08:15 at Tvsu.Commonscheduler.SchedulerManager.Save() Message: Validating Starts...
Info 2012-06-19 , 08:08:15 at Tvsu.Commonscheduler.SchedulerManager.Save() Message: Validating Ends...
Info 2012-06-19 , 08:08:15 at Tvsu.Commonscheduler.SchedulerManager.Save() Message: Sending Values to the SchedulerParser...
Info 2012-06-19 , 08:08:15 at Tvt.Commonscheduler.SchedulerParser.SetValues(String v_ScheduleMode, String v_ScheduleDayOfTheMonth, String v_ScheduleDayOfTheWeek, String v_ScheduleHour, String v_ScheduleMinute, String scheduleSecond, String v_NumMinutes, String v_wakeFromSuspendHibernate, String v_Pre, String v_PreParameters, String v_PreShow, String v_Post, String v_PostParameters, String v_PostShow, String v_Task, String v_TaskParameter, String v_TaskShow, String v_CPUPriority, String v_minDaysBetweenExecution, String v_lastRunTimeHigh, String v_lastRunTimeLow, String v_nextRunTimeHigh, String v_nextRunTimeLow, String v_preRunAsUser, String v_runAsUser, String v_postRunAsUser, String v_schedulerAbility, String v_schedulerPath) Message: Scheduler Parser - Receiving Values from the SchedulerManager
Info 2012-06-19 , 08:08:15 at Tvt.Commonscheduler.SchedulerParser.SetValues(String v_ScheduleMode, String v_ScheduleDayOfTheMonth, String v_ScheduleDayOfTheWeek, String v_ScheduleHour, String v_ScheduleMinute, String scheduleSecond, String v_NumMinutes, String v_wakeFromSuspendHibernate, String v_Pre, String v_PreParameters, String v_PreShow, String v_Post, String v_PostParameters, String v_PostShow, String v_Task, String v_TaskParameter, String v_TaskShow, String v_CPUPriority, String v_minDaysBetweenExecution, String v_lastRunTimeHigh, String v_lastRunTimeLow, String v_nextRunTimeHigh, String v_nextRunTimeLow, String v_preRunAsUser, String v_runAsUser, String v_postRunAsUser, String v_schedulerAbility, String v_schedulerPath) Message: Scheduler Parser - Starting Validation Process!
Info 2012-06-19 , 08:08:15 at Tvt.Commonscheduler.SchedulerParser.SetValues(String v_ScheduleMode, String v_ScheduleDayOfTheMonth, String v_ScheduleDayOfTheWeek, String v_ScheduleHour, String v_ScheduleMinute, String scheduleSecond, String v_NumMinutes, String v_wakeFromSuspendHibernate, String v_Pre, String v_PreParameters, String v_PreShow, String v_Post, String v_PostParameters, String v_PostShow, String v_Task, String v_TaskParameter, String v_TaskShow, String v_CPUPriority, String v_minDaysBetweenExecution, String v_lastRunTimeHigh, String v_lastRunTimeLow, String v_nextRunTimeHigh, String v_nextRunTimeLow, String v_preRunAsUser, String v_runAsUser, String v_postRunAsUser, String v_schedulerAbility, String v_schedulerPath) Message: Scheduler Parser - All validations have been processed!
Info 2012-06-19 , 08:08:15 at Tvt.Commonscheduler.SchedulerParser.SetValues(String v_ScheduleMode, String v_ScheduleDayOfTheMonth, String v_ScheduleDayOfTheWeek, String v_ScheduleHour, String v_ScheduleMinute, String scheduleSecond, String v_NumMinutes, String v_wakeFromSuspendHibernate, String v_Pre, String v_PreParameters, String v_PreShow, String v_Post, String v_PostParameters, String v_PostShow, String v_Task, String v_TaskParameter, String v_TaskShow, String v_CPUPriority, String v_minDaysBetweenExecution, String v_lastRunTimeHigh, String v_lastRunTimeLow, String v_nextRunTimeHigh, String v_nextRunTimeLow, String v_preRunAsUser, String v_runAsUser, String v_postRunAsUser, String v_schedulerAbility, String v_schedulerPath) Message: Scheduler Parser - Writting to the registry...
Info 2012-06-19 , 08:08:15 at Tvt.Commonscheduler.SchedulerParser.SetValues(String v_ScheduleMode, String v_ScheduleDayOfTheMonth, String v_ScheduleDayOfTheWeek, String v_ScheduleHour, String v_ScheduleMinute, String scheduleSecond, String v_NumMinutes, String v_wakeFromSuspendHibernate, String v_Pre, String v_PreParameters, String v_PreShow, String v_Post, String v_PostParameters, String v_PostShow, String v_Task, String v_TaskParameter, String v_TaskShow, String v_CPUPriority, String v_minDaysBetweenExecution, String v_lastRunTimeHigh, String v_lastRunTimeLow, String v_nextRunTimeHigh, String v_nextRunTimeLow, String v_preRunAsUser, String v_runAsUser, String v_postRunAsUser, String v_schedulerAbility, String v_schedulerPath) Message: Scheduler Parser - All values were saved on the Registry!
Info 2012-06-19 , 08:08:15 at Tvt.Commonscheduler.SchedulerParser.SetValues(String v_ScheduleMode, String v_ScheduleDayOfTheMonth, String v_ScheduleDayOfTheWeek, String v_ScheduleHour, String v_ScheduleMinute, String scheduleSecond, String v_NumMinutes, String v_wakeFromSuspendHibernate, String v_Pre, String v_PreParameters, String v_PreShow, String v_Post, String v_PostParameters, String v_PostShow, String v_Task, String v_TaskParameter, String v_TaskShow, String v_CPUPriority, String v_minDaysBetweenExecution, String v_lastRunTimeHigh, String v_lastRunTimeLow, String v_nextRunTimeHigh, String v_nextRunTimeLow, String v_preRunAsUser, String v_runAsUser, String v_postRunAsUser, String v_schedulerAbility, String v_schedulerPath) Message: Scheduler Parser - Reloading Scheduler
Info 2012-06-19 , 08:08:15 at Tvt.Commonscheduler.SchedulerParser.SetValues(String v_ScheduleMode, String v_ScheduleDayOfTheMonth, String v_ScheduleDayOfTheWeek, String v_ScheduleHour, String v_ScheduleMinute, String scheduleSecond, String v_NumMinutes, String v_wakeFromSuspendHibernate, String v_Pre, String v_PreParameters, String v_PreShow, String v_Post, String v_PostParameters, String v_PostShow, String v_Task, String v_TaskParameter, String v_TaskShow, String v_CPUPriority, String v_minDaysBetweenExecution, String v_lastRunTimeHigh, String v_lastRunTimeLow, String v_nextRunTimeHigh, String v_nextRunTimeLow, String v_preRunAsUser, String v_runAsUser, String v_postRunAsUser, String v_schedulerAbility, String v_schedulerPath) Message: Scheduler Parser - The Scheduler was reloaded
Info 2012-06-19 , 08:08:15 at Tvsu.Commonscheduler.SchedulerManager.Save() Message: All values sent to SchedulerParser...
Info 2012-06-19 , 08:08:15 at Tvsu.Commonscheduler.SchedulerManager.Save() Message: Scheduler Manager ends...
Severe 2012-06-19 , 08:08:15 at Tvsu.Sdk.SuSdk.StartApplication() Message: Application runs with the framework: 2.0.50727.5456
Info 2012-06-19 , 08:08:15 at Tvsu.Engine.DataBase.InitializeDataBase() Message: Initializing the DataBase from file: updates.ser
Info 2012-06-19 , 08:08:15 at Tvsu.Sdk.SuSdk.StartApplication() Message: Starting the Application
Warning 2012-06-19 , 08:08:15 at Tvsu.Gui.Util.Tools.get_SystemVendor() Message: The vendor was resolved to THINK
Info 2012-06-19 , 08:08:15 at Tvsu.Gui.GUIController.StartGUI(Boolean showsplash) Message: Starting GUI...
Info 2012-06-19 , 08:08:15 at Tvsu.Gui.GUIController.StartGUI(Boolean showsplash) Message: MainFrame created successfully
Info 2012-06-19 , 08:08:15 at Tvsu.Gui.GUIController.StartGUI(Boolean showsplash) Message: GUI -- Welcome screen
Info 2012-06-19 , 08:08:15 at Tvsu.Gui.GUIController.BackToMain() Message: Setting Welcome screen...
Info 2012-06-19 , 08:08:15 at Tvsu.Gui.MainFrame.SetScreen(String screen, EventHandler[] eh) Message: Loading Welcome screen on Action pane.
Info 2012-06-19 , 08:08:20 at Tvsu.Gui.GUIController.SearchUpdates(Object sender, EventArgs args) Message: Starting the Search process...
Info 2012-06-19 , 08:08:20 at Tvsu.Gui.MainFrame.SetScreen(String screen, EventHandler[] eh) Message: Loading Search screen on Action pane.
Info 2012-06-19 , 08:08:20 at Tvsu.Gui.Util.ProgressThread.InitSearch() Message: GUI -- Reporting progress for the Search
Info 2012-06-19 , 08:08:20 at Tvsu.Sdk.SuSdk.GetSystemProperties() Message: Get the System Properties
Info 2012-06-19 , 08:08:20 at Tvsu.Engine.Task.Task.StartExecution() Message: PreTask
Info 2012-06-19 , 08:08:20 at Tvsu.Engine.Task.Task.StartExecution() Message: Start
Info 2012-06-19 , 08:08:20 at Tvsu.Engine.Task.Task.Start() Message: Starting the task
Info 2012-06-19 , 08:08:20 at Tvsu.Engine.Task.Task.Start() Message: The current process is:HelloProcess
Info 2012-06-19 , 08:08:20 at Tvsu.Engine.Task.Task.Start() Message: Executing the PreProcess HelloProcess
Info 2012-06-19 , 08:08:20 at Tvsu.Engine.Task.Task.Start() Message: Executing the StartProcess HelloProcess
Info 2012-06-19 , 08:08:20 at Tvsu.Engine.Process.HelloProcess.DownloadHelpFile() Message: The chm help file is already present in the system
Info 2012-06-19 , 08:08:20 at Tvsu.Engine.Process.HelloProcess.Start() Message: The test.properties file was not found, the normal Hello process will continue.
Info 2012-06-19 , 08:08:20 at Tvsu.Engine.Process.HelloProcess.Start() Message: HelloProcess Started
Info 2012-06-19 , 08:08:20 at Tvsu.Engine.Process.HelloProcess.Start() Message: Client level: HelloLevel_8_11_00
Info 2012-06-19 , 08:08:20 at Tvsu.Engine.Process.HelloProcess.DownloadUDF(String helloClientLevel) Message: The UDF will be downloaded from: https://download.lenovo.com/ibmdl/pub/pc/pccbbs/agent/SSClientCommon/HelloLevel_8_11_00.xml
Info 2012-06-19 , 08:08:20 at Tvsu.Engine.Process.HelloProcess.DownloadUDF(String helloClientLevel) Message: The UDF will be downloaded to-> C:\Program Files (x86)\Lenovo\System Update\session\system\SSClientCommon\HelloLevel_8_11_00.xml
Info 2012-06-19 , 08:08:20 at Tvsu.Gui.CustomComponents.Step.set_Image(StepImage value) Message: Setting PROCESSING status.
Info 2012-06-19 , 08:08:20 at Tvsu.ConnectionSettings.ConnectionSettings.GetConnectionForURL(String url) Message: Creating a new Connection Settings Bean instance to Host: download.lenovo.com
Info 2012-06-19 , 08:08:20 at Tvt.ConnectionSettings.ConnectionSettings.GetConnectionForURL(String url) Message: Direct connection found
Info 2012-06-19 , 08:08:20 at Tvsu.FileDownloader.HttpsDownload.SetCertificates() Message: Setting certificates...
Info 2012-06-19 , 08:08:20 at Tvsu.FileDownloader.HttpsDownload.GetProxy(ConnectionSettingsBean connBean) Message: Connection type set to DIRECT in ConnectionSettingsBean
Severe 2012-06-19 , 08:08:20 at Tvsu.FileDownloader.HttpsDownload.Init(FileDownloadInfo fileInfo) Message: Debug Log: Init method:GET
Severe 2012-06-19 , 08:08:21 at Tvsu.FileDownloader.HttpsDownload.doDownloadByHttps(FileDownloadInfo fileInfo, downloadingDelegate downDelegate) Message: Debug Log: doDownloadByHttps InterException is null, uri:https://download.lenovo.com/ibmdl/pub/pc/pccbbs/agent/SSClientCommon/HelloLevel_8_11_00.xml
Severe 2012-06-19 , 08:08:21 at Tvsu.FileDownloader.HttpsDownload.doDownloadByHttps(FileDownloadInfo fileInfo, downloadingDelegate downDelegate) Message: Debug Log doDownloadByHttps webException message:The remote server returned an error: (404) Not Found.
Severe 2012-06-19 , 08:08:21 at Tvsu.FileDownloader.HttpsDownload.doDownloadByHttps(FileDownloadInfo fileInfo, downloadingDelegate downDelegate) Message: Debug Log server path: https://download.lenovo.com/ibmdl/pub/pc/pccbbs/agent/SSClientCommon/HelloLevel_8_11_00.xml responseStatus:404
Severe 2012-06-19 , 08:08:21 at Tvsu.FileDownloader.HttpsDownload.doDownloadByHttps(FileDownloadInfo fileInfo, downloadingDelegate downDelegate) Message: Debug Log server path: https://download.lenovo.com/ibmdl/pub/pc/pccbbs/agent/SSClientCommon/HelloLevel_8_11_00.xml webException.StackTrace: at System.Net.HttpWebRequest.GetResponse() at Tvsu.FileDownloader.HttpsDownload.doDownloadByHttps(FileDownloadInfo fileInfo, downloadingDelegate downDelegate)
Info 2012-06-19 , 08:08:21 at Tvsu.Engine.Process.HelloProcess.Start() Message: UDF download status is -> Failed
Severe 2012-06-19 , 08:08:21 at Tvsu.Engine.Process.HelloProcess.Start() Message: Could't connect to the HelloServer, no UDF file was downloaded
Info 2012-06-19 , 08:08:21 at Tvsu.Egather.EgatherManager.GetEgatherParser(String type) Message: Running egather minimal.....
Info 2012-06-19 , 08:08:21 at Tvsu.Egather.EgatherExecutor.RunAsWindowsService(String directory, String command, String arguments) Message: /execute ia.exe /arguments -filename"""C:\Program Files (x86)\Lenovo\System Update\egather\sysrecomin""" -probes REGIONAL_SETTINGS GATHERER_INFORMATION SYSTEM_SUMMARY -local /directory C:\Program Files (x86)\Lenovo\System Update\egather\ /type COMMAND /timeout 300000
Info 2012-06-19 , 08:08:21 at Tvsu.Egather.EgatherExecutor.RunAsWindowsService(String directory, String command, String arguments) Message: FileName Path: C:\Program Files (x86)\Lenovo\System Update\TvsuCommandLauncher.exe
Info 2012-06-19 , 08:08:22 at Tvsu.Egather.EgatherExecutor.ExecuteEgather(String fileOutput, String args) Message: RC eGatherer: 0
Info 2012-06-19 , 08:08:23 at Tvsu.Engine.Process.HelloProcess.Start() Message: MTM received from eGather: 4220CTO
Severe 2012-06-19 , 08:08:23 at Tvsu.Engine.Process.HelloProcess.Start() Message: An error ocurred while using the MappingParser Exception: Message: Key cannot be null. Parameter name: key Type: System.ArgumentNullException at System.Collections.Hashtable.ContainsKey(Object key) at System.Collections.Hashtable.Contains(Object key) at Tvt.Mapping.Languages.get_Item(String tla) at Tvsu.Engine.Process.HelloProcess.Start()
Severe 2012-06-19 , 08:08:23 at Tvsu.Engine.Process.HelloProcess.Start() Message: A value could not be mapped when using the MappingParser or eGather execution failed Exception: Message: Error getting MappingParser properties Type: Tvsu.Engine.Process.MappingInterfaceException at Tvsu.Engine.Process.HelloProcess.Start()
Severe 2012-06-19 , 08:08:23 at Tvsu.Engine.Task.Task.StartExecution() Message: An error occurred while the task: HelloTask executed the process: HelloProcessthe message from exception isA fatal error ocurred while in the HelloProcess Exception: Message: A fatal error ocurred while in the HelloProcess Type: Tvsu.Engine.Process.HelloProcessException at Tvsu.Engine.Task.Task.Start() at Tvsu.Engine.Task.Task.StartExecution()
Info 2012-06-19 , 08:08:23 at Tvsu.Gui.CustomComponents.Step.set_Image(StepImage value) Message: Setting FAILED status.
Info 2012-06-19 , 08:08:23 at Tvsu.Gui.GUIController.ShowErrorMessage(Exception e) Message: Error while gathering user information. Exception: Message: A fatal error ocurred while in the HelloProcess Type: Tvsu.Engine.Process.HelloProcessException at Tvsu.Engine.Task.Task.StartExecution() at Tvsu.Sdk.SuSdk.GetSystemProperties() at Tvsu.Gui.Util.ProgressThread.InitSearch()
Info 2012-06-19 , 08:08:23 at Tvsu.Gui.FlowScreens.Messages.ShowMessage(String message, String title, String mastheadtext, MessageType t, Boolean check, IWin32Window owner) Message: Showing ERROR Message: < An error occurred while gathering user information. >
Info 2012-06-19 , 08:08:25 at Tvsu.Gui.GUIController.BackToMain() Message: Setting Welcome screen...
Info 2012-06-19 , 08:08:25 at Tvsu.Gui.MainFrame.SetScreen(String screen, EventHandler[] eh) Message: Loading Welcome screen on Action pane.
Info 2012-06-19 , 08:08:30 at Tvsu.Gui.GUIController.AskBeforeClosing() Message: Close System Update?
Info 2012-06-19 , 08:08:30 at Tvsu.Gui.FlowScreens.Messages.ShowMessage(String message, String title, String mastheadtext, MessageType t, Boolean check, IWin32Window owner) Message: Showing QUESTION Message: < Are you sure you want to close System Update? >
Info 2012-06-19 , 08:08:32 at Tvsu.Gui.GUIController.AskBeforeClosing() Message: Application will close now? True
Info 2012-06-19 , 08:08:32 at Tvsu.Gui.MainFrame.OnClosing(CancelEventArgs e) Message: User wanted to close System Update, or the package force a reboot.
Severe 2012-06-19 , 08:08:32 at Tvsu.Sdk.SuSdk.ShutDownApplication() Message: Has happened an exception while the UNCAuthenticator.Shutdown() was executedShare name can not be null or empty
Info 2012-06-19 , 08:08:32 at Tvsu.Engine.DataBase.ShutDownDataBase() Message: Shutting down the DataBase, saving any data into file: updates.ser
Info 2012-06-19 , 08:08:32 at Tvsu.Environment.EnvironmentManager.closeEM() Message: Closing Environment Manager.
Info 2012-06-19 , 08:08:32 at Tvsu.Sdk.SuSdk.ShutDownApplication() Message: Shut Down the Application -
ThinkVantage System Update -- An error occurred while gathering user information
I receive this message after selecting "Get New Updates" in Version 3.14.0031 of this software. I am running Windows XP SP3 on an X200 Thinkpad. I have tried removing and reinstalling the program without success.
1. Version 6.0.5717.35 is for the ThinkVantage Toolbox and the version I have installed now is 6.0.5802.25. Is there a way to use Toolbox to do a System Update?
2. The ThinkVantage System Update I have installed is at version 3.14.0034 with a build date of 2011-4-18. The System Update installed this version itself and is showing as the current version.
So I seem to be up-to-date on the software but am still getting the same error message "An error occurred while gathering user information"; when the progress bar is at 9%.
Thanks, any help on this would be appreciated.
The information from the tvsu_log that might be relavent is:
Severe 2011-06-26 , 10:21:12
at Tvsu.Engine.Process.HelloProcess.Start()
Message: An error ocurred while using the MappingParser
Exception:
Message: Key cannot be null.
Parameter name: key
Type: System.ArgumentNullException
at System.Collections.Hashtable.ContainsKey(Object key)
at System.Collections.Hashtable.Contains(Object key)
at Tvt.Mapping.Languages.get_Item(String tla)
at Tvsu.Engine.Process.HelloProcess.Start()
Severe 2011-06-26 , 10:21:12
at Tvsu.Engine.Process.HelloProcess.Start()
Message: A value could not be mapped when using the MappingParser or eGather execution failed
Exception:
Message: Error getting MappingParser properties
Type: Tvsu.Engine.Process.MappingInterfaceException
at Tvsu.Engine.Process.HelloProcess.Start()
Severe 2011-06-26 , 10:21:12
at Tvsu.Engine.Task.Task.StartExecution()
Message: An error occurred while the task: HelloTask executed the process: HelloProcessthe message from exception isA fatal error ocurred while in the HelloProcess
Exception:
Message: A fatal error ocurred while in the HelloProcess
Type: Tvsu.Engine.Process.HelloProcessException
at Tvsu.Engine.Task.Task.Start()
at Tvsu.Engine.Task.Task.StartExecution()
Info 2011-06-26 , 10:21:12
at Tvsu.Gui.CustomComponents.Step.set_Image(StepImage value)
Message: Setting FAILED status.
Info 2011-06-26 , 10:21:12
at Tvsu.Gui.GUIController.ShowErrorMessage(Exception e)
Message: Error while gathering user information.
Exception:
Message: A fatal error ocurred while in the HelloProcess
Type: Tvsu.Engine.Process.HelloProcessException
at Tvsu.Engine.Task.Task.StartExecution()
at Tvsu.Sdk.SuSdk.GetSystemProperties()
at Tvsu.Gui.Util.ProgressThread.InitSearch() -
Regarding Project Preparation , Requiremnts Gathering, User Training
Hai
Please send the documents for Project Preparation , Requirments Gathering, User Training Urgently to [email protected]
regards
andreaHi Andreas ,
The BW Project guidelines can be as follows ,
Stages in BW project
1 Project Preparation / Requirement Gathering
2 Business Blueprint
3 Realization
4 Final Preparation
5 GO Live & Support
Project Preparation / Requirement Gathering
Collect requirement thru interviews with Business teams /Core users / Information Leaders .
Study & analyze KPI 's (key figures) of Business process .
Identify the measurement criteria's (Characteristics).
Understand the Drill down requirements if any.
Understand the Business process data flow if any .
Identify the needs for data staging layers in BW (i.e need for ODS if any)
Understand the system landscape .
Prepare Final Requirements Documents in the form of Functional Specifications containing :
Report Owners,
Data flow ,
KPIs ,
measurement criterias,
Report format along with drilldown requirements .
2 Business Blueprint
Check Business content against the requirements
Check for appropriate
Info Objects - Key figures & Characters
Check for Info cubes / ODS
Check for data sources & identify fields in source system
Identify Master data
document all the information in a file follow standard templates
Prepare final solution
Identify differences (Gaps) between Business Content & Functional
specification. propose new solutions/Developments & changes if required at different levels such as Info Objects ,Info cube , Data source etc . Document the gaps & respective solutions proposed follow standard templates
Design & Documentation
Design the ERD & MDM diagrams for each cube & related objects
Design the primary keys/data fields for intermediate Storage in ODS
Design the Data flow charts right from data source up to Cube .
Consider the performance parameters while designing data models
Prepare High level / Low level design documents for each data model.--- follow standard templates
Identify the Roles & Authorizations required and Document it follow standard templates
final review of design with core BW users .
Sign off the BBP documents
3 Realization
Check & Apply Latest Patches/Packages ...in BW & R/3 systems.
Activate/Build & enhance the cubes/ODS as per data model designs...maintain the version documents .
Identify & activate Info objects / Master data info sources / attributes ,prepare update rules
Assign data sources .prepare transfer rules , prepare multi providers . prepare Info packages .
perform the unit testing for data loads .both for master data & transaction data .
develop & test the end user queries .
Design the process chains ,schedule & test
create authorizations / Roles assign to users ..and test
Apply necessary patches & Notes if any .
freeze & release the final objects to quality systems
perform quality tests .
Re design if required . (document changes, maintain versions)
4 Final Preparation
Prepare the final check list of objects to be released .identify the dependencies & sequence of release
perform Go Live checks as recommended by SAP in production system
keep up to date Patch Levels in Production system
Test for production scenarios in a pre-production system which is a replica of production system .
Do not Encourage the changes at this stage .
freeze the objects .
5 GO Live & Support
keep up to date Patch Levels
Release the objects to production system
Run the set ups in R/3 source system & Initialize Loads in BW
Schedule Batch jobs in R/3 system (Delta loads)
schedule the process chains in BW .
Performance tuning on going activity
Enhancements - if any
You can get some detailed information in the following link.
http://sap.ittoolbox.com/documents/document.asp?i=3581
Try to go to ASAP implementation roadmap.
https://websmp103.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000420636&_SCENARIO=01100035870000000202
Check the links below that gives you brief overview of the above steps .
https://websmp201.sap-ag.de/asap
http://www.geocities.com/santosh_karkhanis/ASAP/
ASAP
https://websmp201.sap-ag.de/asap
http://www.geocities.com/santosh_karkhanis/ASAP/
https://service.sap.com/roadmaps
https://websmp104.sap-ag.de/bi
***Please reward if useful.**
Hope these links helps you.
Regards
CSM Reddy -
Kicking a user out of the portal if a User Info Setting is not populated?
That's what we want to do - we have a bit set in a User Info Setting by a custom profiling process. Users are redirected back to the Login screen of the portal when they successfully complete the process and the bit gets set to a certain value. This is kicked off in our OnAfterLogin (Login PEI). Well, if a user just goes up to the address bar in the browser and deletes up to "server.pt", they can get to the portal without this custom process being completed - they can circumvent it, because they technically have already logged in. The problem is that if they don'tcomplete that process, many portlets will not work because they are dependent on data gathered and set as a result of successful completion.
So, we need to somehow check globally if a certain User Info Setting is populated, and if it is not, log the user out. We know the URL/AS to redirect to, but I don't see a PEI in which a redirect is returned other than those in the Login PEI and Directory Actions PEI. I was hoping the IPageActions interface might help... So, I'm guessing a PEI is not the answer. What would be the best way to approach this?
Thanks,
SarahCox EnterprisesHow about having your header or footer portlets check for you?
Or when you setup a user, only give them access to one portlet. The portlet would allow them to update their information, then give them access to the remaining features of the site.
just a couple of quick ideas.
Maybe you are looking for
-
How to get BPM Payload attribute value in ADF TaskFlow
Hi, Activities which I did : I have created ADF Project. Then I created ADF TaskFlow through 'ADF TaskFlow Based on Human Task' option by locating BPM task. So now TaskFlow is been generated and also respective dataControl value also gener
-
I have a problem when you update the iPhone
I have a problem when you update the iPhone does not complete the update and the bar that appears in the top of iTunes (restoring iphone software)
-
hi experts how can i find out what is the meaning of the message numbers in batch input operation, and what is the meaning of the message type. thanks amit
-
HT1937 asking me to get a replacement sim card who can help
i have got a i phone from friend and have restored to orignal settings i went to put sim in and said that the i need a new sim what is that go help please
-
Regarding calling 1 report from another
Hello Friends, Can u plz tell me how to call one report from another report. Regards, Drashana