Gatos - how to enable s-video output for ATI

i need to make s-video work on my laptop (want to connect laptop to big screen to present things - unfortunately this screen has no VGA but s-video)
in [extra] there is atitvout that should do this and also do so on my old computer (ATI mach64 chipset)
atitvout does not work on my thinkpad a31p - it does not recognize the card correctly and fails. for x.org i use the radeon driver and this works fine. it's a ATI FireGL 7800 that works fine with the "RV200" driver. but "radeon" does not have s-video output as far i know - no options how to enable s-video-out
after a long search on the internet, reading that most users that have my laptop never tried to make s-video work, i found GATOS:
under:
http://gatos.sourceforge.net/theater_out.php
there is a module that, if i understand it correctly, should make s-video work
what i don't know:
- how do you build this driver?
- how do you use it?
(anyone able to make a pkg work with newest xorg?)
nowhere documented is how to use it with xorg >6.8.0
anyone can help me?

atitvout just works with the vesa driver ...
and try the option "atitvout -f t" (and remember to put the tv connected before booting)
but the gatos drivers would be much better

Similar Messages

Re: how to enable s-video output in lenovo R61i--- What buttons ???

What buttons enable S- video on R61 ????

atitvout just works with the vesa driver ...
and try the option "atitvout -f t" (and remember to put the tv connected before booting)
but the gatos drivers would be much better

How to change the permission of a folder of a website hosted on Microsoft Azure. I would like to know how to enable read write permission for this folder

How to change the permission of a folder of a website hosted on Microsoft Azure. I would like to know how to enable read write permission for this folder
Regards,
John

Hi,
Please try to setting Folder Permissions on Web Publish, and then deploy it with Web Deploy, as far as I know, if we do that, Web Deploy will use the SetAcl operation to change permissions. Please have a look at the article below.
#http://sedodream.com/2011/11/08/settingfolderpermissionsonwebpublish.aspx
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to enable file size 2GB for linux RHEL4.0

Hi
I am on oracle 9.2.0.6 on linux RHEL 4.0. How do i enable large file size for filesystems.
When i query ulimit -a ulimit -f it is returning me unlimited.
But my database listener crashed as listener log file reached 2gb in size.
I couldnt find how to enable the largefile size for the filesystem.
Thanks
SV

Are you sure that the filesystem is limiting your listener log file size?
Please try to concatenate some lines into the logfile and see if the filesystem prevents it. I expect you to find out that the limit is only with the listener.
In any case, run a weekly/monthly job that creates an empty log file.
If the problem is with ext3 then you should check with someone more experienced because it does not sound to me like the proper (or default) behavior of ext3.

HOW to enable oracle advance compression for EXIST partitioned table

Hi All,
I have to enable oracle advance compression for existing table which PARTITION BY RANGE then SUBPARTITION BY HASH.
ORacle version: 11.2.0.2.0
Please provide me any relevant doc or any exp.
Thanks in advance.

could not see any text for how to enable oracle advance compression for EXIST partitioned table.RTFM.
From the resource above:
How do I compress an existing table?
There are multiple options available to compress existing tables. For offline compression, one could use ALTER TABLE Table_Name MOVE COMPRESS statement. A compressed copy of an existing table can be created by using CREATE TABLE Table_Name COMPRESS FOR ALL OPERATIONS AS SELECT *. For online compression, Oracle’s online redefinition utility can be used. More details for online redefinition are available here.
"

How to enable OHS compression/cache for OBIEE

Hi i have installed OHS (11.1.1.7) and webcache on OBIEE 11.1.1.7. Does any one know how to enable/configure compression/cache for OBIEE analytics? Also how to validate if compression is working?

Hi Anke,
all tables that have been created in V9.7 with attribute COMPRESS YES will be compressed statically .
db2 " select count(*) , rowcompmode from syscat.tables group by rowcompmode "
After the upgrade to 10.5 all tables created with attribute COMPRESS YES will get rowcompmode='A' but old tables created with V9.7 will stay with rowcompmode='S' .
You can change tables from rowcompmode='S' to rowcompmode='A' via ALTER TABLE . After this all new pages or old pages that are touched will be adaptively compressed. But old pages that are not touched will only be static compressed. To get all pages of an existinbg table adaptive compressed you need to move data. For example with DB6CONV.
Regards
Frank

HT3986 Does anyone know how to enable the "Delete" key for logging on the Windows 7 partition on the latest iMac, via the latest Apple wireless keyboard? Many Thanks

Hi All
Does anyone know how to enable the "Delete" key for logging on the Windows 7 partition on the latest iMac, via the latest Apple wireless keyboard - the standard wired apple keyboard works fine via this key but not the new wireless keyboard?
Many Thanks

Holy crap, this fixes the issue. At least temporarily it has. I should add that my issue was single finger forward/back swipe stopped working on the magic mouse in Firefox since Mavericks came along. I have been fighting this since I upgraded to Mavericks a few months ago. Thank you, tbirdvet. You have no idea how much easier you just made using my iMac again.
Message was edited by: wadems

How to make best videos/audios for Creative Zen/Zen Vision W/Zen Vision M/Z

4Easysoft Creative Zen Video Converter is an all-in-one Video Converter for Creative Zen software with high output quality and powerful video editing functions, which can help all the zen users to make the best video/audio effect.
First of all, let’s make clear what kinds of videos/audios can get the best effect in the zen players.
Video:
MPEG, WMV, and AVI (MPEG-4 SP, DivX, Xvid), while MPEG-1, and MPEG-2 are supported, but must be transcoded with the included software.
Audio:
MP3, AAC, WMA, WAV, and Audible 2, 3, and 4 formats.
Settings:
Video resolution: 320×240; Video Bitrate: 500 kbps; Audio Bitrate: between 96 to 128 kbps.
Then, let me show you how to make a full use of this powerful converter.
Preparation:Download and install 4Easysoft Creative Zen Video Converter
http://www.4easysoft.com/guide/creative-zen-video-converter/main.jpg
Step 1: Run this software and add video/audio files.
Step 2: Select output video format from the profile drop-down list.
Click the “Profile” button to select the output video format from the drop-down list button.
Step 3: Customize output settings.
Click “Settings” button in the output settings area, you are allowed to customize the output parameters, specify output folder and select output format.
Step 4: Start conversion
Click “Start” button on right bottom of the main interface, you can begin the conversion. All the tasks of conversion will be finished at fast speed and high output quality.
http://www.4easysoft.com/guide/creative-zen-video-converter/steps.jpg
Tips on editing videos:
1: Capture your favorite picture.
Just click the “Snapshot” button to save your favorite image.
2: Merge videos into one file.
Just check the “merge into one file” option if you want to merge the selected contents into one file As default the merged file is named after the first selected file (either a title or a chapter)
3: Select preference
Click the “Preference” button and a dialog pops up, you can select the output destination, the Snapshot foler, the format of the snapshot image. You can also choose to shut down your computer or do nothing after your conversion. You can also select the CPU usage.
4: Trim video
You can get any clip of your video and put it on your zen.
5: Crop video
You can crop your video by selecting your video mode, setting crop values, or drag the frame.
http://www.4easysoft.com/guide/creative-zen-video-converter/tips.jpg
Ok, just enjoy movies and music with your Creative Zen player now!
More useful tools:
MP4 Converter is a powerful MP4 Video Converter which is designed to convert almost any video formats to MPEG-4 standard formats; WMV Converter provides perfect solution to convert common video formats to WMV with the best quality of picture and sound; Apple TV Video Converter is the excellent Apple TV converter software to convert all video files such as AVI, MPEG, WMV, MP4, MOV, RM, ASF, 3GP, VOB, etc, to Apple TV movies.
Edited by: user11254370 on 2009-6-9 下午11:58

Just wanted to mention - I bought the IR Remote thinking to make the player useful without navigation keys. Now I feel like I wasted more money instead of shifting to some other player by some other company with better customer service.

How to enable 640x80 video mode on Satego P200?

Hello all,
for an old game I need the video mode 640x480x8. Unfortunately I can't select the video mode using Catalyst for the Satego P200 with an ATI Mobility Radeon HD 2600. Is there a way to enable this video mode?
Michael

The game is Starcraft and its' addon Broodwar. As version 2 is in the works and some friends and I played it very often in former times we started playing it again. Kind of veteran meeting but quite fun. :)
There are not many posts about it but there seems to be a problem related to s-video output when using 640x480. I am quite sure the graphics adapter, the display and the driver are able to support this mode. So I hope there's maybe neat trick to change some *.inf file or something similar to reactivate the mode.

How i can have video output on the iphone 5?

I upgrade my 4s for a iphone 5 now I have a problem I can't play my movies on my car because iphone 5 do not suport video output

marcov77 wrote:
iphone 5 do not suport video output
Yes it does. However if you want help then you need to actually provide us with some details.
What kind of videos?
What app were you using before?
How were outputting the video before?
What happens when you try?

How to enable a partner application for Single Sign-On?

Can someone please advise me on how to enable my existing J2EE web application for the Oracle Single Sign-On?
My requirement is i want to provide the single sign-on authentication service to my J2EE web application. For this, I would like to make my application as a partner application similar like the OracleAS Portal.
I am using Oracle 10g ( OralceAS, Oracle Infra, OID ...)
I found the following service/APIs which Oracle provides. I am not sure which one is suitable for me.
1. mod_osso ( Static)
--- In this case, I have to make a entry in mod_osso.config file to protect the URL. should I have to register the URL again through single sign on admin page ("Administer Partner Application") after make a entry in config file?
2. mod_osso ( Dynamic directive)
-- in this case, I have to modify the code by providing the directives like 401, 499.. etc. So i don't prefer this as i don't want to touch my app.
--If I go with this option, should i have to register the URL with Single sign on server through SSO admin page ( as mentioned in the above step#1) ?
3. SSO SDK
- Since it was deprecated and need java coding, i am prefer this option.
-- however, if i go with this option, i will develop code by using SDK. in this case i need to register the URL in SSO server through admin page.. am i right?
Note:- OSSO server integrated with Active Directory for the authentication.
Thanks,
-Senthil

sharon38_74 wrote:
they said that our internal application needs to send a "login request" to etran via SSL with the user's information encoded in base 64 format. etran captures the HTTP header containing user authentication and authorization information, and parses the required information from the HTTP header.
My question is that how I set user information in HTTP header? From my understanding, once I am able to set the user information in HTTP header, it is in base 64 format?Your application need to act like a proxy. You can invoke a HTTP request programmatically using java.net.URLConnection. You can set request headers using URLConnection#setRequestProperty(). Also see the API docs: [http://java.sun.com/javase/6/docs/api/java/net/URLConnection.html]. You only need to know the header field name where to set the Base64-encoded value in. You need to Base64-encode the value yourself.

Video Output for PXI Embedded Real-Time Controller ?

I plan to purchase a PXI Embedded Real-Time Controller for security monitoring.
Is it possible to use the video output of a PXI Controller running RTOS to display messages from a LabVIEW RT application ? According to the documentation, it seems that the use of the video output is only possible for PXI Controllers running Windows XP.
Does it exist a specific application to do this with LabVIEW RT ?
Thanx.
H.L.
Solved!
Go to Solution.

Hi Yann,
The situation seems a bit confusing as in the link you've given above using the local monitor from a pxi labview rt system as the HMI without a pc attached, two messages (here and here) say that it is possible to display an image on the video output of a PXI RT controller using a function of the NI-IMAQ librarey (namely, the IMAQ RT Video Out VI) !
I have the NI-IMAQ library but no PXI controller to test if this solution should work or not
Does anyone have the answer ?
Thanx,
H.L.

How to enable a font family for SAPScript

We want to enable a font family "JPMINCHO" so that we can use it in our SAPscript. When we are trying it from SAP Script font maintenance (SE73) is not allowing us to enable it. Our SAP version is ECC 6 on DB2. Can anyone suggest " how to enable a font family" from SE73 or anyother method for enabling it ?

in SE71 only u can define ur font .
if u want same font for whole paragraph go to paragraph format.otherwise go for charactor format.
down u ll see some tab like standard font tabs and outline
for font family go clik on font and chose ur fotn family.

Video Output for Musical on new Macbook Air

Doing first production of a musical.
I'm thinking of buying Logic Pro 9 to control the output of recorded audio and video for the show (as well as to compose a few extra pieces).
The features page on the Apple site says: Logic can let you view synchronized QuickTime movies on a separate monitor using output options like Digital Cinema Desktop.
http://www.apple.com/logicpro/top-features/
The Tech Specs page on the Apple site says: External video output via FireWire or DVCPRO HD.
http://www.apple.com/se/logicpro/specs/
I've bought a brand spanking new Macbook Air which has a Thunderbolt and two USB ports.
Would I be able to use Logic on my Macbook Air to output my video? (I was thinking I would do it to a projector either through WiFi or a (yellow) composite cable.)
(The alternative I was thinking of was to use MuseScore to enter the notation for the extra pieces. Garageband for the audio output (it's missing a few instruments [e.g. clarinet, xylophone]) and plain old Quicktime for the video output.
Thanks!
John
(I've already spent way more than I can afford.)

OS X 10.7 Lion, 10.8 Mountain Lion & 10.9 Mavericks
Reset Password starting from Recovery HD
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.

How to enable SSL optimization only for a single remote WAE and specific website?

Hi guys.
I have to enable SSL optimization for a specifc HTTPS website only and for a specific remote site only (branch office).
The scenario is as follows:
Multiple sites connected via a MPLS cloud. Each site has its own WAE device (module or appliance).
There is a central manager and core WAE in the main site (central site).
There is a website accessed via HTTPS by all the remote sites. This specific website is hosted within the main site.
For only a specific branch office (remote site) we want to enable SSL optimization for this specific website.
I saw this great and useful doc, but I still have some concerns.
https://supportforums.cisco.com/docs/DOC-16452
Basically, according to I see, I should do the following if I want to enable SSL optimization with the entire environment:
- export the certificate and keys;
- enable secure store in the central manager;
- In the remote and core WAE, Check "initialize CMS secure store" and "Open CMS Secure Store";
- In the core WAE, import the CA certificate (upload PEM file);
- In the core WAE, create the SSL Accelerated Service by:
    --importing the client certificate and the key;
    -- Match interesting traffic;
    -- Put the SSL Acc Service in service;
- Finally, make sure SSL acceleration is enabled in both remote and core WAE.
The concerns:
I only need to enable SSL optimization for a specific location accessing a specific website.
Should the steps above work fine If I enable the SSL service for this specific website in the core WAE and enabling secure store only in a single remote site (brach office)?
how will the other remote locations behave?
Will they access the website normally with no SSL optimization even passing thru the core WAE?
What about the other SSL sites which have no certificate? They will be treated as normal HTTPS with no optimization, right?
If the site uses proxy, will any flow be impacted?
If the steps above do not fit my case, how can I configure SSL optimization for only one remote WAE?
Thanks in advance.
importing the client certificate and key (client.crt and client.key exported from the Web server - See more at: https://supportforums.cisco.com/docs/DOC-16452#sthash.3BKz05zU.dpu

Hi guys.
I have to enable SSL optimization for a specifc HTTPS website only and for a specific remote site only (branch office).
The scenario is as follows:
Multiple sites connected via a MPLS cloud. Each site has its own WAE device (module or appliance).
There is a central manager and core WAE in the main site (central site).
There is a website accessed via HTTPS by all the remote sites. This specific website is hosted within the main site.
For only a specific branch office (remote site) we want to enable SSL optimization for this specific website.
I saw this great and useful doc, but I still have some concerns.
https://supportforums.cisco.com/docs/DOC-16452
Basically, according to I see, I should do the following if I want to enable SSL optimization with the entire environment:
- export the certificate and keys;
- enable secure store in the central manager;
- In the remote and core WAE, Check "initialize CMS secure store" and "Open CMS Secure Store";
- In the core WAE, import the CA certificate (upload PEM file);
- In the core WAE, create the SSL Accelerated Service by:
    --importing the client certificate and the key;
    -- Match interesting traffic;
    -- Put the SSL Acc Service in service;
- Finally, make sure SSL acceleration is enabled in both remote and core WAE.
The concerns:
I only need to enable SSL optimization for a specific location accessing a specific website.
Should the steps above work fine If I enable the SSL service for this specific website in the core WAE and enabling secure store only in a single remote site (brach office)?
how will the other remote locations behave?
Will they access the website normally with no SSL optimization even passing thru the core WAE?
What about the other SSL sites which have no certificate? They will be treated as normal HTTPS with no optimization, right?
If the site uses proxy, will any flow be impacted?
If the steps above do not fit my case, how can I configure SSL optimization for only one remote WAE?
Thanks in advance.
importing the client certificate and key (client.crt and client.key exported from the Web server - See more at: https://supportforums.cisco.com/docs/DOC-16452#sthash.3BKz05zU.dpu

Gatos - how to enable s-video output for ATI

Similar Messages

Maybe you are looking for