GATP: Error when ATP is triggered from R/3

Hi
I have set up a RB ATP scenario for two products say 1 and 2. The substitutions are working fine in APO simulations. When i call ATP check from R/3, the followinfg happens:
1. If i create sales order for 1, RB ATP is called Substitution works fine as the remaining qty for 1 is replaced by 2.
2. However when i create Sales order for product 2, i get the following message:
"Product for external product number 2 and BSG BSGEVL does not exist
Message no. /SAPAPO/MAT040
Can you please help me with this?
Thank You
Rajiv

Hi Rajiv,
This may because of you might not enter correct Material no in the order or you might not maiantain the material Master for that material in SAP R/3 system for that specific sales area which you are creating sales order.
So please eneter correct Material number or maintain(Extend) the Material master in that sales area if not available.
I hope it will help you,
Regards,
Murali.

Similar Messages

Error when updating the data from DSO to cube

Hi,
I am getting the error when uploading the data from the ods to cube.
The following is the error message.
Unable to determine period for date 20090101, fiscal year variant Z2: Error #
How can i solve this issue.
Regards
Annie

Hi ,
fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
check this link ..
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
Regards,
shikha

Error when determining a number from object BI_ODS

Error When determining a number from object BI_ODS and number 01 when flat file source system is assigned to transfer rules of infosource , when activating this error occured .
plz need solution.

Hi,
Number ranges can be maintained through the transaction SNRO. For details check:
http://help.sap.com/saphelp_nw70/helpdata/EN/2a/fa02e3493111d182b70000e829fbfe/frameset.htm
Rgds-
Sonal

Error when determining a number from object BI_TSDTEL and number 01

Hi BW Experts,
After Transporting Infosources (Master & Transaction) to BW QA, the transfer rules were not getting activated in QA. The following error message was diaplyed.
"Error when determining a number from object BI_TSDTEL and number 01
Object name can only contain characters from syntactical character set
Object name can only contain characters from syntactical character set
Data element for InfoObject KOKRS 0CO_AREA could not be created
Data element for InfoObject KOKRS 0CO_AREA could not be created
Transfer structure 0IM_FA_IQ_2_SB activated under the name 0IM_FA_IQ_2_SA
It is not necessary to copy dependent objects for transfer structure 0IM_FA_IQ_2_SA
Transfer structure 0IM_FA_IQ_2_SA does not exist
Error RSAR 440 when handling objects with type R3TR ISTS."
I have gone through the Note: 674818.
Could someone clear me about BI_TSDTEl, By using this do we need to maintain object intervals manually in all the systems like BW ( Dev & QA ), R/3 (Dev & QA).
Because I have not seen the Intervals in R/3 ( Dev & QA) systems.
please could someone provide Inputs for this.
Thanks in Advance
Regards
SK

Hi,
Try to see that transfer structure is existing in the sytem which is connecting in
the BW quality.
You need the same to be transported from the development server of R/3 to quality server of R/3.
Just check if this helps.
Regards
Rahul Bindroo

Short dump error when extracting delta records from R/3

I am working on BW 3.5 and I am facing some short dump error when extracting delta records from the r/3 to BW.
Below is the error message
Kindly do the needful ASAP.
Job started
Step 001 started (program SBIE0001, variant &0000000024277, user ID BWREMOTE)
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = 0ISCM_PAYMENT_01
         Current Values for Selected Profile Parameters               *
abap/heap_area_nondia......... 2000000000                              *
abap/heap_area_total.......... 2000000000                              *
abap/heaplimit................ 40000000                                *
zcsa/installed_languages...... DE                                      *
zcsa/system_language.......... E                                       *
ztta/max_memreq_MB............ 2047                                    *
ztta/roll_area................ 6500000                                 *
ztta/roll_extension........... 2000000000                              *
2,454 LUWs confirmed and 2,454 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DAT
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled

Hi,
I look at the transaction ST22 to see which type of error has given you. Take a look at the notes to correct the error.
Another option is to look at OSS notes, because the error is giving you a standard extractor.
Greetings,

Error when connecting to portal from some machines

Hi all,
Can anyone help me with this.
I get this jserver error when connecting to portal from some
client machines.
I works fine from the others. Any ideas?
This is the error I get:
[08/01/2002 17:41:57:618 GMT+00:00] page/Timeout occurred,
label=73 url=http://odeceixe:81/pls/portal30/!
PORTAL30.wwpro_app_provider.execute_portlet time=15828ms
[08/01/2002 17:41:57:618 GMT+00:00] page/ContentFetcher
Unexpected Exception, name=content-fetcher5
java.io.EOFException: Premature EOF encountered
     at HTTPClient.StreamDemultiplexor.read
(StreamDemultiplexor.java, Compiled Code)
     at HTTPClient.RespInputStream.read(RespInputStream.java,
Compiled Code)
     at java.io.InputStream.read(InputStream.java:95)
     at java.io.InputStreamReader.fill
(InputStreamReader.java:163)
     at java.io.InputStreamReader.read
(InputStreamReader.java:239)
     at oracle.webdb.page.ContentFetcher.run
(ContentFetcher.java, Compiled Code)

Did you ever find the cause of this, I am receiving the same message, but as you said, only when connecting to the portal via a certain pc.

Error when launching promoted app from RemoteAPP

Hi:
We are receiving this error when launching any application from RemoteAPP, we tried promoting Calculator, Notepad, etc. and received the same error as well.
"Personalization:
This theme can't be applied to the desktop.
Try clicking a different theme"
Help!
Thank you,
Stangride

If you launch the app directly from the session hosts using the same account that your using with remoteapp what are you getting? Try and RDP to the session host when you attempt it. I would also check rsop.msc to see if you have any GPO or scripts that
are manipulating themes.

More than maximum 5 filtered album lists trying to register. This will fail,Why i am getting this error when i pick video from Photo library.

I am able to pick 4 videos from the Photo library in my iPhoneAPP but when i try to pick 5th one it throws an error:
"More than maximum 5 filtered album lists trying to register. This will fail,Why i am getting this error when i pick video from Photo library."

Hello Tate r Bulic
I don't have any idea how to remove this error,can i pick more than 5 videos from the photo library...
If it's then please help me and gimme idea..Thanks

Error when undate solution manager from 700 to 701(700 enp1)

Hi all,
error when undate solution manager from 700 to 701(700 enp1),error:OCS package SAPKITL428 does not match the current software component vector.
My current supportstack is as follows :
SAP_ABA 700 0016 SAPKA70016
SAP_BASIS 700 0016 SAPKB70016
PI_BASIS 2005_1_700 0016 SAPKIPYM08
ST-PI 2008_1_700 0002 SAPKITLRD1
SAP_BW 700 0018 SAPKW70018
SAP_AP 700 0014 SAPKNA7014
BBPCRM 500 0012 SAPKU50012
CPRXRPM 400 0014 SAPK-40016INCPRXRPM
ST 400 0017 SAPKITL427
ST-A/PI 01L_CRM570 0000 -
ST-ICO 150_700 0017 SAPK-1507KINSTPL
ST-SER 700_2008_1 0005 SAPKITLOO5

Hi,
Because prerequisite to apply this package is not met. To apply this package below is the prerequisite which i can see in your package level is not met:
Support Packages
Package      Value
SAPKU50012      T
SAPK-70401INBICONT      T
SAPK-40013INCPRXRPM      T
SAPK-50001INCRMUIF      T
SAPKA70102      T
SAPKNA7012      T
SAPKB70101      T
SAPKB70102      T
SAPK-701DHINSAPBASIS      T
SAPKITL427
Thanks
Sunny

Helpme I have error when I try connect from struts to web service

helpme I have error when I try connect from struts to web service using basic authentication . the error message is
[SOAP Exception: fault code= SOAP-ENV Protocol; msg=Unsupported response content type "text/html" must be "text/xml"; ] Response was <html><body> 401 Unauthorized </body></html>
I'm not using ldap for authentication only xml (jazx-data.xml) ... I already create user with jazn.jar for that user , and I dont know why it still error like that ..
Please helpme I don't have anytime more to find the mistake , ??
I'm using Jdeveloper 9i , and oc4j 9.0.4 Server (Not embedded with Jdev)
But when I use with sample java client it success .....
then I try with Struts the response is unsupported response content type text/html must be text/xml response was 401 Unauthorized

1.The reason why this error occurs is, we are getting non SOAP response when the program is expecting a SOAP response. Did you set the proxy server correctly? Try to handle the exception and see the content type of the response in your program.
2. While creating the client stub u must check an option for authentication for webservice .should solve ur problem.
thanks
sirisha

Duplicate Object Name Error When Publishing Crystal Reports from BW to BOE

Hi,
We recently upgraded our systems (all client and server) to SP2.7 in order to solve a problem with saving Crystal Reports to BW. Now we are experiencing a new error when trying to publish a Crystal Report from BW to BOE (either all in one step from Crystal Reports application or directly from within BW).
Upon trying to publish a Crystal Report from BW to BOE, we get the following error:
"An error occurred while saving and / or publishing. The return code 1 was returned from the server. Logon to Crystal Enterprise failed. Unable to commit the changes to Enterprise. Reason: Failed to commit objects to server : Duplicate object name in the same folder."
We have repeated this issue numerous time with different reports, users and logon credentials and have verified that there are NOT any duplicate object names.
Additionally, in some cases, the report ultimately publishes to BOE, but with the above error interruption along the way.
Any ideas?
Thanks,
Josh
Edited by: Josh Crawford on May 10, 2010 9:46 AM

Ingo,
Apologies for the delayed response. We've spent a few days poking around with this issue, and had even opened a customer message for it (13641).
In the end, it seems that the problem was somehow associated with the "Prepare this report for translation." flag in the "Save to BW Options" dialog box of Crystal Reports. If we try to Save & Publish with the Translation flag selected, we get the duplicate entry error. If we Save & Publish without the Translation flag selected, everything is fine.
There are still some details we need to look into, but for the time being it looks like we don't have an issue anymore(assuming we ever did) as we're not concerned with Translation capabilities.
If we come across the problem again, I'll post again.
Thanks,
Josh

Error when moving multiple emails from one account to another

I have an IMAP account for one of my emails. I have recently changed web hosting and so changed this to a POP account. I don't want to lose all my emails, which is what happened to another one of my accounts when the web hosting was changed. So have opened a new account on mail which is the POP one. I want move all my emails from the IMAP to the POP. I selected all and clicked move but only half went over, now everytime I try to do the remainder I get an error message just literally saying 'There was an error when trying to move 431 emails across' Or something like that. Why is this happening and is there another way of doing it? It's justw eird that half of them moved fine and the rest stayed.

Try Mail/Mailbox/Export Mailbox which will move the mailbox to your desktop. Then Mail/File/Import Mailbox which will put the e-mails in an Import Folder in On My Mac. That will save the e-mails for you.

Error when moving a mailbox from one database to another using the EMS

Error "The database is excluded from provisioning.Please Select a different target database for the move"
Above is the Error i get when moving a mailbox to another database on the same Exchange mailbox Server 2013 using the EMS

Hi MikeVATX,
Using the EMS I ran the Command
below,
Get-MailboxDatabase DBName | select name,*provision*
The result displayed that the Parameter IsExcludedFromProvisioning was set to True which i had to set to false by running the command below as per your guide.
Get-MailboxDatabase -Identity DBName | Set-MailboxDatabase -IsExcludedFromProvisioning
$ False
Then i was able to move the mailboxes.
It now works fine.Thanks for that solution.
Thanks & Regards,
Ronald

Error when loading the data from PSA to ODS......

Hi BW guru's,
i am facing one problem while loading the data from PSA to ODS.so please help me in this regard.
Please give a step by step guidelines for me...
the error while loading the data from PSA to ODS is "There are no PSA tables for these selection criteria","An error occurred when reading PSA data".
thanks in advance,
ashok.

hi ashok,
u can push data from psa to ods, for this goto the psa in rsa1>psa>goto that request>rightclick>select " schedule update Immediately ", then data will moved from psa to ods.
or
In ods > delete the failed request>goto the processing tab-->select 3rd option " psa and then subsequentially to data targets ", --> schedule the infopackage.
bye
sunil

Error when Trying to Upgrade from 8.1.7.4 to 10.2.0.3

Hello -
I am getting this error, when attempting to run the ultu102i script in preparation for an upgrade to 10g:
SQL> @utlu102i
DECLARE
ERROR at line 1:
ORA-01403: no data found
ORA-06512: at line 1560
I have upgraded many databases to 10g from 8i, and have never seen this error before. I have the database started as 8i, and my environment set up as 8i (ORACLE_HOME, etc), and then I try to run teh utlu102i script that is within the /rdbms/admin directory of the 10g software home location.
Any ideas are greatly appreciated.
Thanks!

edit the utlu102i and utl102x.sql scripts and comment out the following two statements.
SELECT value INTO db_undo FROM v$parameter
WHERE name = 'undo_management';
SELECT value INTO db_undo_tbs FROM v$parameter
WHERE name = 'undo_tablespace';
this ones in metalink, i came accross it when upgrading to 10.2.0.3 i think its a new bug in this pathcset.
metalink noteid is: 407031.1
Message was edited by:
chris_c

GATP: Error when ATP is triggered from R/3

Similar Messages

Maybe you are looking for