GATP exclude a particular storgre location from item availablty check va02

I need to exclude a storage location for avalablty check in va02.its doing the gatp chek in apo. Any input will be a help.

Hi ,
i think you can set these kind of rules at APO side..right ? , check with Fucntionals..
regards
Prabhu

Similar Messages

  • How to exclude stock of a particular storage type from collective availabil

    How to exclude stock of a particular storage type from collective availability check in MDVP.

    you can set the storage location as 'Storage location stock excluded from MRP' value '1' in the field
    Sloc MRP indicator , in MRP view $ when you enter a storage location accessing the material master.
    Thsi is the only way to exclude the storage location, you have to do it per each material and also it is excluded from the MRP.
    With this option the stock is not considered in ATP.
    IF you need the storage location in the MRP, then you should consider the use of MRP Areas.
    With the MRP Areas you define which plants/storage locations belong to each MRP area and the ATP is performed for eah area with the stocks that exist in each of them.
    Please if the issue is solved set the thread  as answered and provide the points to the useful replies.
    thanks for your cooperation

  • Need to exclude storage location from MRP.

    Hi Gurus,
    Is there an option to exclude a specified storage location from MRP at configuration level. But not at material level as in MRP4 view.
    We have excluded the stoarge location in config OMIR, however the system considers that stock if the same is not excluded in MRP4 of that material.
    Now, the problem is every time i need to go to the material master of every material  i have to excude from MRP, which is very time consuming..!
    Please advise me is there any option in point of view of Storage Location,  just simply  define the storage location to be excluded from MRP run.
    Thanks in advance.
    Naveen.

    Dear,
    Yes you can do it though OMIR or MMSC 1-Storage location stock excluded from MRP.
    Also check this link for more details,
    Exclude purchase order on storage location from MRP
    Regards,
    R.Brahmankar
    Edited by: R Brahmankar on May 25, 2009 12:22 PM

  • Deactivation of storage locations from MRP run

    Hi gurus,
    How can i deactivate a particular storage location from MRP in a particular plant.
    Regards
    Kaisar

    Hello,
    There are 2 ways of doing that.
    1. With the Transaction OMIR and selecting th indicator 1 Storage location stock excluded from MRP
    This storage location will be excluded from MRP.
    2. For a Specific Material(s), if you want the Storage location to be excluded from MRP:
    You need to select the storage locatio MRP indicator as 1 in MRP4View of the Material.
    Some concerns:
    Your Materials are extended to the St.location say xxxx.
    Now if you want this storage location to be excluded from the MRP.
    By simply seeting the Customization settings will not work.
    You need to manually select the MRP4 view and change the St.Loc MRP Indicator to 1.
    The Materials created after this customization setting will adopt this settings automatically.
    Hope this helps..
    Regards,
    Siva

  • Transit time of routes from the availability check

    is it possible to exclude the transit time of routes from the availability check

    Dear Varada,
    no, it is not possible to exclude the route transit time from the availability check process. The ATP process and transportation scheduling are always running together because we have to deliver to the required relivery date. Therefore the availability check always takes into consideration the transportation scheduling.
    I hope, this information helps you a little bit further.
    Kind Regards,
    Akmal Vakhidov
    Development Support SD, SAP, Walldorf/Germany

  • HT204266 I live in China, have Dutch nationality, and no US address or Credit Card; how can I have access to products from the US iTunes store, in particular music, when such items are not available from the China iTunes store? In general, what are the di

    I live in China, have Dutch nationality, and no US address or Credit Card; how can I have access to products from the US iTunes store, in particular music, when such items are not available from the China iTunes store? In general, what are the differences between countries' iTunes offerings? Does one really need an address and a credit card for any country to be able to access that countries iTunes store? Why these restrictions?

    You cannot.
    You cannot use another countrys itunes store.
    You must be physically locates inside the borders of a country to use that countrys itunes store and a credit card issued in that country with a valid billing address in that country.
    The owners of the distribution rights of movies/music/etc differ by country.  These distributors decide who can sell their content in that country.
    Buy from another source if your countrys itunes store does not carry somehting that you want.

  • How can I EXCLUDE particular folders/files from being included in the Lightroom 5 catalog?

    How can I EXCLUDE particular folders/files from being included in the Lightroom 5 catalog?
    I want to be able to specify paths and/or filename patterns that should NEVER be indexed in the catalog: not that they don't show up under certain circumstances, just that they are NOT THERE (in the catalog) to begin with!!
    I also do NOT want to have to respecify these criteria when "synching" the catalog; criteria should be PERMANENT (or at least 'til they're changed in LR preferences).
    I cannot be the only person in the world with this problem--but it sure seems like it, because I've spent an inordinate amount of time doing online searches & I can't find anything that addresses this issue.
    Can anyone PLEASE HELP me?
    BTW, Adobe employees (if there are any of you out there), I'm simply trying out LR now.  If I can't get this (seemingly fundamental) thing worked out (with relatively little effort), Adobe is going to LOSE A SALE of LR, because it's useless to me without this feature.
    Thanks,
    -t

    Thanks for the info... but how to you TELL LR to EXCLUDE images in a particular directory/directory structure?  The intuitive place to indicate this would be a right-click on the folder itself (or particular images), but no such option exists..  "???"  Thanks again, -pt
    The same way that you avoid buying things in your local convenience store. You don't stick a lot of labels on certain shelves, slap a credit card down on the counter each week, and announce you are buying everything that doesn't have a label on its shelf. You just choose the things you want to buy.
    Your mention of "synching the catalog" suggests that you are expecting the LR library, to mirror the total images in the computer by default. This is not IMO a useful way to think about it. LR contains no images at all, by default: the Catalog starts out empty.
    Then you Add just those selected images that you want to import, among those already in the computer. That's a one-off process which is IMO best achieved controllably in batches - which you can keyword and otherwise organise in LR terms as you go. For new incoming images, ongoing, it is a question of Copying, Moving or Adding these in defined batches as they occur - from the relevant location only - there is no need to re-consider the import of a wider body of images. And one would not want to repeat that whole task anyway: one's prior investment in achieving the right selectivity, has a positive value.
    RP

  • Excluding storage location from MRP run in Long Term Planning

    Hi,friends,
         In my scenario , i want to exclude storage location from MRP run in long term planning.When i set storage location MRP indicator "2" in SPRO and SLoc MRP indicator "1" MRP4 in material master, i can exclude the storage location after run MRP with MD01/MD02,and i can see the expected result in MD04.But in Long Term Planning scenario the storage location can not be excluded after run MRP with MS01/MS02,and the requirements list in MS04 include the stock in the storage location i want to exclude. i dont know if i miss something.Plz give me some advice.
    Regards
    Joey

    Hi,
    Refer the OSS Note 208017 - LTP: Long-term planning and storage locations
    ==========================================================================
    Symptom
    In long-term planning (Transactions MSBT / MS01 / MS02 / MS03), the MRP indicator of a storage location for a material is not taken into account (material master, view MRP 2 [up to and including Release 3.1I] or MRP 4 [as of Release 4.0A]).
    The storage locations excluded by MRP or planned separately are also planned in the plant segment.
    Additional key words
    LTP, MM01, MM02, MM03, master data, MRP indicator, LGORT ...
    Cause and prerequisites
    The MRP indicator for a certain storage location of a material is only taken into account in operative planning (requirements planning, MRP).
    The long-term planning occurs exclusively at plant level.
    Solution
    This is no error. The system works as intended.
    The individual storage locations should not be distinguished in the long-term planning, in order to perform a comprehensive long-term planning.
    This is important, for example, within the kanban processing where the storage locations with kanban MRP are excluded from the MRP, but in spite of that should be included in the long-term planning.
    ==========================================================================
    Regards,
    Siva

  • To exclude SCARP storage location from MRP

    Hi Gurus,
    We have a issue regarding the scrap Quantities. we need to exclude these materials from the available stock for MRP. We have a setting in the MRP available stock with Blocked stock not checked and restricted stock checked.
    My question is if we un check the restricted stock, is the MRP will not consider the stock in scrap storage location.
    Please help to find the solution.
    Thank you.
    naveen.

    Hi,
    Your scrap str location is not either blocked or restricted str location. This is a regular str location but the name is scrap location.
    System will consider this str location as a regular str location. So do setting to exclude this str location from MRP as previous member explained.
    Regards,
    Dharma

  • I want to exclude a storage location from MRP

    I want to exclude repair storage location from MRP so that the stock with repairs storage location should not be considered for other demands.
    Also repair storage location stock should not be calculated against 'stocks'  term in MD04.
    How to do this ? Pls share.

    Hi,
    In transaction OMIR, choose your plant & then for the storage location you want to exclude from MRP enter 1 (exclude from MRP).
    After this setting is maintained, whenever a material is created in this plant & storage location, it will have MRP indicator as "1" in the mrp 4 view .
    For materials already in this storage location if the MRP indicator "1" is not maintained in mrp 4 view, please go for a mass change maintenance in the material master & maintain this indicator.
    Stock in the excluded storage location will not add up to the stock which is displayed in the top in the md04 screen. This stock will be displayed separately in the bottom of the screen.
    Please let me know if you have any questions.
    Regards,
    Senthilkumar

  • Exclude stock at a storage location from the Productionn Planning run

    Hi,
    We have to exclude a storage location from the Production Planning run. We already implemented a user exit in CIF and changed the stock at the storage location to a category Z1 that is not relavant to SAP, but the stock at the location is still being consitered for production planning.
    Please suggest a way so that it is excluded from the Production planning
    Regards,
    Sireesh

    Hi Sireesh,
    Please try these following options.
    1) Filter this storage location in the programme /SAPAPO/RMSDPDEP by writing customised code with an abapper, so that it will drops the storage location stocks not getting planned during deployment
    2) Try anyof these user exists
    APOBP011 Enhancement for Stock BAPIs (BUS10504)
    APOCF011 Inbound Processing: Stock
    APOCF027 Customer-Specific Enhancements: Stock
    3) Exclude the category from the ATD receipts category group maintained in the master data
    Regards
    R. Senthil Mareeswaran.

  • Exclude purchase order on storage location from MRP

    Hi Everyone,
    We have excluded storage location 1200 from MRP.
    The result shows only stock on 1200 excluded from MRP, PO on storage location 1200 (storage location 1200 in PO) still considered in MRP.
    Is there any way to exclude PO on 1200 i MRP also?
    Best Regards,
    Bin

    Dear,
    Go to MRP 4 view of the material master .
    In the field SLoc MRP indicator field "1".
    If it is for a material than in the material master level it can be done. If you are looking for all materials in that storage location, than it is better to define this in SPRO->Production->MRP-->Planning-->Define Storage Location per MRP plant. Here for that storage location in that plant you need to define "2" - Storage location stock planned seperately or "1" - Exclude Storage location from MRP.
    Also u can use t.code MMSC.
    Select Material & Plant and Assign MRP =1 for the Sloc to be excluded
    Regards,
    R.Brahmankar
    Edited by: R Brahmankar on Nov 14, 2008 9:32 AM

  • Blocking enduser from using a particular storage location

    Dear Gurus,
    When production order confirmation is done for a particular material.
    The consumption materials are picked from a particular storage location:e.g.XA01,but the end user sometimes the picks the material from Raw material storage location. ie is RM01,which the client doesnot want.
    Client wants that end user picks material from XA01 and not RM01
    How can i block the end user from using the raw matarial storage location from being used in production order confirmation.
    Thanks in advance
    Regards
    Ram
    Edited by: RAMKUMAR WARIYAR on Jul 3, 2009 3:36 PM

    Dear,
    You can try with SPRO - Materials management -> Inventory Management & Physical inventory -> Authorization Management -> Authorization check at storage location.
    You can use the authorization object M_MSEG_LGO.
    Please take help from  basis person.
    It will solve your problem.
    Regards,
    R.Brahmankar

  • Urgent: How to exclude a particular value from the selection in the infopac

    How to exclude a particular value from the selection in the infopackage.
    Ex: not load for cost center 10000
    Thank you,
    sam

    Hi Sam,
    You cannot do this directly as exclusion, but you can include all other values, even as ranges and thus exclude the particular value, else you can also try to do this by writing a routine.
    Hope this helps...

  • QM exclude storage location from QM

    Dear All,
    is it possible in some way to exclude a storage location from QM in a plant managed with QM.
    The case is this:
    We have the material AAA with QM active for good receipt.
    -If the material arrive in st. location 10 we want have stock in Q status.
    -If the material arrive in st. location 20 we want have stock in Free status.
    St location 10 and 20 belong to same plant.
    If it is not possible, do you have some suggestion to solve this case (u.exit?)?
    Thanks in advance. Best regards.

    Tanks,
    but finally we have used another u.exit, EXIT_SAPLQAAT_002.
    This one is called directly in the MIGO and allow to deactivate QM setting X in the parameter NO_INSPECTION.
    Best Regards.
    Alby

Maybe you are looking for