GATP: How to consider SNP Deployment demand (EG) into ATP check ?

Hello experts,
we have a location 1000 where we run GATP. This location serves customers directly (via normal SalesOrders) and serves other locations like a DC via STOs. Serving other location is done (in a nutshell) using SNP which creates SNP STOs and afterwards we run Deployment to push out avialable stock. We would like to consider the so called "SNP Deployment Requisitions" (EG - "Deployment: Release for stk transf. req") as demand which the GATP product availability check should take into account. By this we would like to make sure "serving other locations" from locaiton 1000 is accounted for while performing ATP check for the Sales Orders in location 1000.
Problem: ATP category EG has been added to the ATP customizing (check control in SPRO) - but these SNP Deployment Reqs do not have a "confirmed qty" looking into RRP3 / ATP tab - only a required qty. THis means these elements are not considered while doing an ATp check although the demand categorty is in scope of the ATP check. I checked the cumulation rules - we are using 3 (consider req qty during create, consider conf qty during chg) - but this doesn't help even with the other rules we have there.
I wonder if there is a way to tell the system to consider the ATP cat. EG as demand correctly - even without a confirmed qty. Or, does somebody known how to generate/make SNP deployment reqs "with conf qty" (I checkded SNP deployment heuristicsdocumentation and SAP help etc. - without any result).
Regards
Thomas

Hi Elanie/Thomas,
We have similar issue where we are trying to confirm deployment demand in supplying location to reserve HUB demand over customer orders.
I tried the setting mentioned by Thomas but ended up getting the same error as Elania " No orders selected by filter setting"
"performing an GATP-BOP run on SNP Deployment PReqs does only require to setup a respective BOP "filter type" as follows:
--> add ATP cat "EG" while maintaining the filter type in tcode S_AP9_75000212
--> use the filter type in your /SAPAPO/BOP run
Be sure that you select orders / run your BOP in thesupplying location (where SNP deployment orders are of ATP cat = EG)."
Please let me know if you have any work around or solution for this .
Thank you,
Sai

Similar Messages

How to compile and deploy an ejb into Sun ONE app.server 7.0

I am new to Sun ONE application server. I Have .java files and deployment descriptor files with me. How should proceed. When i tried to use asant it is saying that build.xml not found. I copied build.xml from some other directory to the current directory. Then it is saying that common.xml not found. Please help.
Regards,
Nagaraju.

Hi,
The build.xml file should be in a directory from where
you are running the asant command.
To resolve the common.xml file not found error,
open your build.xml and check from which location the common.xml file is incuded.
In the sample application it is four directories above
the directory where build.xml is located.
You can copy the common.xml in the current directory and then change the following in your build.xml
<!ENTITY include SYSTEM "../../../../common.xml">
to <!ENTITY include SYSTEM "common.xml">
Hope this helps.
Get back in case you have more issues

VMI Concept and SNP Deployment

Dear Experts ,
I am currently Exploring VMI in SNP
Below steps are done
1) Master Master, plant,PIR,sales order , stock are cif to APO
2) Manually Enter Forecast in the SNP planning book
3) when i run Heuristics i got two PR based or the my demand
4) now when i run SNP deployment , the PR is not picked
5) how to push the PR to ECC 6
Please advice
Thanks & Regards
Raj

Dear Datta,
Thanks for your information
Below are my setting in the product master
Demand Profile                  Supply Profile                   Deploymt Profle
Forecast Horizn 0              SNP Prod. Hor.         0         Push Distributn
Pull Depl. Hor. 0              Extnd SNP Prod. Hor.   0         Fair Share Rule
Period Split                    SNP Stk Trn.Hor        0
VMI Promo.LTime                 Push Depl. Hor.        0
                 Depl. SS Push H        0
i have PR as below
13.12.2010     12:00:00     PurRqs     25976446/000010     10     0     10     10     1     0     0               0     13.12.2010     12:00:00     0     PC     Purchase Requisition                    13.12.2010     12:00:00     13.12.2010     12:00:00     0               4
13.12.2010     23:59:59          SNP Product Horizon                                                  0                         End of SNP Production Horizon                                        0               0
14.12.2010     12:00:00     PurRqs     25976447/000010     5     0     15     5     1     0     0               0     14.12.2010     12:00:00     0     PC     Purchase Requisition                    14.12.2010     12:00:00     14.12.2010     12:00:00     0               4
15.12.2010     12:00:00     PurRqs     25976448/000010     1     0     16     1     1     0     0               0     15.12.2010     12:00:00     0     PC     Purchase Requisition                    15.12.2010     12:00:00     15.12.2010     12:00:00     0               4
07.09.2013     23:59:59          PP/DS Horizon                                                  0                         End of PP/DS Horizon                                        0               0
I Run Deployment as below
Planning Book                   9ASNP94
Data View                       SNP94(1)
Global SNP Settings Profile     SAP
Paral. Proc. Profile
Deployment Horizon in Days       30
    Selection Profile
    Version                     000
    Location                    CU0000161596       to
    Product                     5127802            to
Destination Locations                              to
now i get the below result
No SNP stock transfers exist in the planning horizon
Message no. /SAPAPO/SDP_DEP017
can you advise me where i am doing a mistake
Thanks & Regards
Raj

Characteristics based planning: SNP deployment supports characteristics?

Dear experts,
Does SCM7.0 support SNP deployment with characteristics (configurable products)?
I am aware that SCM7.0 includes PP/DS deployment features that support characteristics, but I must use a SNP deployment method.
Thank you very much.
Edited by: Hector Mediavilla on Sep 26, 2011 1:41 PM

Hello,
It's a pity that the functionality is not supported yet up to the most recent version.
Please check the below contenct from note 1446894:
+Characteristics Based Deployment
SNP Deployment does not support Characteristic based planning. The functional scope of PP/DS Deployment is restricted compared to Deployment in SNP:
- only Deployment Heuristics (no Real-Time Deployment and no Deployment Optimization)
- no Push Deployment
- no Fair Share between stock transfer demands and independent requirements+
Best Regards,
Ada

How to delete the deployed composite in weblogic server 11g

Can someone tell me how to delete the deployed composite in weblogic server 11g ?I'm facing an issue where the weblogic server is getting started and immediately after sometime the server changes to "Force shutdown"..When i checked the logs,there is an error in one of the composite i deployed..So now i wanted to delete the deployed composite?Please help ....
Thanks

Hi
1. Deleting a domain will not hold any references. But make sure that under your user_projects/applications also remove the folder that matches with your domain. Basically under user_projects folder you will see 2 folders named applications and domains. When you create a domain say mySoaDomain, it will crate a folder with the same name under applications folder also with few files like em.ear. If you do this, then you can crate a new soa domain and use the same old name.
2. NOW comes the most important thing. If you create a new SOADomain, at one point, you had to give details for soainfra and mds schemas. If you give your current existing db details (that was used for your old deleted domain), then you may still have the issues. Because the soainfra db may still have the instances for your old process.
3. If you really want to have a full clean soa domain, here is what you do:
a) Run rcu and drop the existing schemas for soainfra and mds.
b) Run rcu again and create above schemas again.
c) Now create SOADomain using config wizard and refer above clean rcu db and you are all set.
3. Under your domain root folder, just searh for files named with your workflow and you should see the .jar location.
Thanks
Ravi Jegga

How to create and deploy a simple jstl applicaton in weblogic 10.3.3

How to create and deploy a simple jstl applicaton in weblogic 10.3.3

1) Since JSTL libraries are provided as Web application libraries, they must be deployed before the Web application that is using JSTL functionality is deployed. The libraries can be deployed using the Administration Console or with the command-line weblogic.Deployer tool.
Here’s an example of deploying a JSTL 1.2 library using the weblogic.Deployer command-line:
java weblogic.Deployer -adminurl t3://localhost:7001
-user weblogic -password weblogic
-deploy -library
d:/beahome/wlserver_10.3/common/deployable-libraries/jstl-1.2.war
This command deploys the JSTL 1.2 library using the default library-name, specification-version and implementation-version defined by the MANIFEST.MF in the library.
After a library is deployed, the extension-name, specification-version and implementation-version of the library can be found in Administration console. This information can also be found in the MANIFEST.MF file of the library WAR file.
For more information on deploying a Web module refer below URL
http://docs.oracle.com/cd/E15051_01/wls/docs103/deployment/deployunits.html
2) To reference a JSF or JSTL library, a standard web application can define a <library-ref> descriptor in the application’s weblogic.xml file. Here is an example:
<library-ref>
<library-name>jsf</library-name>
<specification-version>1.2</specification-version>
<implementation-version>1.2.0</implementation-version>
<exact-match>false</exact-match>
</library-ref>
For more information on referencing a Web application library refer below URL
http://docs.oracle.com/cd/E15051_01/wls/docs103/programming/libraries.html
3) Create a sample JSP in your application and JSP should look as shown below
<%@ taglib prefix="c" uri="http://java.sun.com/jstl/core" %>
<html>
<head>
<title>TestJSTL</title>
</head>
<body>
<c:set var="topic" value="JSTL" />
<c:out value="${topic}" />
</body>
</html>
4) Create WAR and deploy and test.
Edited by: Murali Veligeti on Jul 26, 2012 9:00 AM

WSUS 3.2 work on Win2008 R2, how to use it deploy MS patch for Win 2012 ?

WSUS 3.2 work on Win2008 R2, how to use it deploy MS patch for Win 2012 ?
I have installed KB2734608, but when I search MS13-101 , no patch for Win 2012.
Can you help me resolve this problem ?
Thanks

On Thu, 10 Apr 2014 06:01:48 +0000, fujitsu08 wrote:
WSUS 3.2 work on Win2008 R2, how to use it deploy MS patch for Win 2012 ?
WSUS has its own, dedicated forum where the WSUS experts answer questions.
You should repost your question here:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverwsus
Paul Adare - FIM CM MVP
Aibohphobia: n. Fear of Palindromes

How to compile and deploy JAX-WS web service from commandline (!) ?

I have read a couple of tutorials about how to create and deploy web services with
certain IDEs (e.g. Eclipse).
But I found no guide on how to compile a java web service source from command line !!
Lets say I have a java source class with annotations inside (like "@WebMethod").
How do I generate with the built-in j2ee v5 tools from a web service from command line and deploy it e.g. to TomCat or JBoss ?
Is there somewhere such a simple step-by-step intro?
Thx
Peter

You can download JWSDP 2.0 from sun and install it. Under jaxws (the installed directory) you can find sample directory which has build.xml can be run from command prompt using ant. if you want in detail means go through the build.xml and use wsgen.bat or wsimport under the bin directory of jaxws
Edited by: Muyallu_Bala on Apr 14, 2008 5:49 AM

How to Kill Batch Deployment

Hi,
I Started batch of mappings for deployment, It has thrown some errors then I started individual mapping deployment.
But after deploying few maps, I am unable to deploy some of the mappings.
The error is RTC-5161: Deployment cannot proceed because an error during pre deployment or generation phase.
I thought the earlier started deployment is in progress that’s why it is showing this kind of errors. But I don’t see any deploying job status in Control Center.
Could someone please Help me on this how to resolve this issue or How to see the deployment status in Audit tables and kill them.
Thanks in Advance

Hi,
It is also possible to look at the activity in the database.
There are some scripts you can use
In $ORACLE_HOME/owb/rtp/sql are some scripts:
- list_requests.sql
- deactivate_execution.sql
- deactivate_all.sql
You can use them with sqlplus
example:
sqlplus <repositoryowner>@<SID> @list_requests
We use these all the time with OWB 10.2.0.3 and OWB 11.1
You can also look at the activity of Oracle Workflow
Example:
-- OWB Check hanging processes
SELECT *
FROM owf_mgr.wf_item_activity_statuses_v
WHERE activity_type_code = 'PROCESS'
AND activity_status_code != 'COMPLETE';
Emile

How to Install and deploy Oracle Discoverer in Oracle AppServer 10.1.3.2

I need to know how to install and deploy Oracle Discoverer in Oracle Application Server 10.1.3.2?

Hi
Discoverer doesn't install into OAS 10.1.3.2. It uses 10.1.2.1 or 10.1.2.2.
When you install Discoverer it installs its own OAS components.
Best wishes
Michael

How to build and deploy ejb in j2ee!!

HI there!!
Newbie Question. I know this is very rude to ask a question "How to build and deploy ejb in j2ee server??", but please help me. I just learned some servlets worked with tomcat. Now I want to learn more about ejb, could anyone suggest me any online tutorial or book where in it is explained step by step builiding and deploying ejb's in j2ee server, please help me. I would be grateful to you.

A good book to start with is Enterprise JavaBeans by Monson-Haefel (O'Reilly press). It covers deployment of EJBs on J2EE servers. Also check out sites specific to your server, sometimes they have specific requirements (like Weblogic).

How to Build and Deploy Flex application in EP6

Hi All,
Can anyone tell how to build and deploy Flex application in EP6.
I want to build a normal application in flex and present it through iviews. How do I configure my Iiview to have flex component running in Portal Environment.
Thanks
Deepak

A good book to start with is Enterprise JavaBeans by Monson-Haefel (O'Reilly press). It covers deployment of EJBs on J2EE servers. Also check out sites specific to your server, sometimes they have specific requirements (like Weblogic).

How to Create and Deploy Web Services Using Oracle 9i JDeveloper

Hi,
My Question is how to create and deploy Web Services using Oracle 9i JDeveloper.Anybody please give me a detailed Reply.Please Reply to [email protected]
Hopr to Hear From you,
Regards,
G Sreekumar

You could use datasources. You should do this in your BC4J Configuration. Then when deploying your applicaiton use the command -installDataSource (from admin.jar) to create the right datasource.
You could probably use the name of your connection + "DS" so you can also use it locally in JDeveloper as JDev seesm to create this automaticly for your Connections.

RE: How do I access deployed TOOL libraries from mycode?

Hi Martin,
sorry for the late answer but I hope it is still helpful.
First: In the workspace you make your distribution from, check whether
you really have library icons.
Second: Make the distribution and run it from the partition workshop.
Startup should fail when you do not have the libraries installed. If you
install them later and you can run that distribution then, you can be
sure that you use your library.
Third: Sometimes it is difficult to import the library pex-file into
your workspace when there are already plans with that name. To overwrite
them you can use a traceflag (cfg:c4:14:14:1). But take care! this will
overwrite!!! Do not overwrite them before you put your libraries sources
into another repos. If you did it by accident, at least do not integrate
until you saved the original code.
Hope this helps. If you have more question please feel free to contact
me.
Uli
Ulrich Beutenmüller
TechnoData GmbH
Germany
-----Original Message-----
From: Martin G Nystrom [SMTP:[email protected]]
Sent: Thursday, October 15, 1998 12:56 PM
To: [email protected]
Subject: Re: How do I access deployed TOOL libraries from my
code?
Excellent! Now can I be sure that my client application is using the
deployed
library, not bundling its own when I distribute the application?
-Martin
Karoly <[email protected]> on 10/14/98 05:55:43 PM
To: Martin G Nystrom/AM/LLY
cc:
Subject: Re: How do I access deployed TOOL libraries from my code?
Martin,
Here is how it works:
When you create a library distribution, part of the result is a
'Library
Definition' pex file (located under the 'appdist') like this:
C:\forte\appdist\EnvName\LibName\cl0\generic\LibName\LibName.pex
You would import this pex file into a workspace, after which it
would
appear
as any other Forte library.
Once integrated, the library can used by other plans as a supplier
(remember
to 'install' the library from E-Console).
Hope this helps,
Karoly Kojnok
Martin G Nystrom wrote:
We have a lot of plans that contain "business objects" that ourclient
applications share. I'd like to deploy these plans as TOOLlibraries (not
compiled) and then have my deployed applications use them. Myquestion is:
How do I access the library?
Some possible answers:
1) Just include it as a supplier plan, it will automatically use thedeployed
TOOL library
2) You have to programmatically load it using task.part.findLibrary
3) The help says I can "import it into my repository" -- how do I dothat?
-Martin
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Excellent! Now can I be sure that my client application is using the deployed
library, not bundling its own when I distribute the application?
-Martin
Karoly <[email protected]> on 10/14/98 05:55:43 PM
To: Martin G Nystrom/AM/LLY
cc:
Subject: Re: How do I access deployed TOOL libraries from my code?
Martin,
Here is how it works:
When you create a library distribution, part of the result is a 'Library
Definition' pex file (located under the 'appdist') like this:
C:\forte\appdist\EnvName\LibName\cl0\generic\LibName\LibName.pex
You would import this pex file into a workspace, after which it would
appear
as any other Forte library.
Once integrated, the library can used by other plans as a supplier
(remember
to 'install' the library from E-Console).
Hope this helps,
Karoly Kojnok
Martin G Nystrom wrote:
We have a lot of plans that contain "business objects" that our client
applications share. I'd like to deploy these plans as TOOL libraries (not
compiled) and then have my deployed applications use them. My question is:
How do I access the library?
Some possible answers:
1) Just include it as a supplier plan, it will automatically use thedeployed
TOOL library
2) You have to programmatically load it using task.part.findLibrary
3) The help says I can "import it into my repository" -- how do I do that?
-Martin
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

SAP SNP and Demand Planning

Can someone provide some links or papers which have details of extracts from SAP SNP and Demand Planning and APO in general?
I am aware of help.sap.com links
Thanks

Hi,
Check these.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f229690-0201-0010-84ba-9ee5a8958a05
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4fe5d590-0201-0010-6c8d-ada86492cf11
http://help.sap.com/bp_biv335/BI_EN/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
http://help.sap.com/bp_biv335/BI_EN/html/BW/DemPlanAnal.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bi/apo%2b-%2bbw%2badhoc%2breporting
Re: APO to BW Design Question
Re: APO BW Integration
Regards.

GATP: How to consider SNP Deployment demand (EG) into ATP check ?

Similar Messages

Maybe you are looking for