Gauges Calibration and testing

hello all,
can somebody help for sequence of process and setting required in MM/QM to
-Send the Gauges for Calibration to out side vendor and receive back.
-To send the material outside for (destructive)testing and receive the material back and book it on scrap account.

Hi,
Hope you have raised this query earlier also & you got some replies.
Refer the link below.
process in QM for Calibration of guage & destructive material testing
Pl ask if you have any specific queries in that.
Regards
K.M.Arun

Similar Messages

Error 200077 during Strain Gauge Calibration in Measurement and Automation Explorer V5.3.1f0

Hey Guyz!
I am experiencing a problem perfomring my shunt calibration using a 350ohm(GF 2) strain gauge connected with NI9949 and NI9237 in a NI cDAQ-9178 Hardware.
When i click on strain callibration under configuration-Device: R3 being my shunt of 100k ohm, i can measure the errors and calibration but when i hit the calibration tab, it gives me an error 200077 occured at Strain Gauge Calibration (see aatached jpeg file for the error type).
I don't know what is wrong, i have doublt-tripple checked my circuit, and have read the forums regarding the same error and have come across the "signal input range", in my case it is default kept at 1m max and -1m min. I am not sure how these values work.
Any guidance would be appreciated.
Thanks in advance.
Attachments:
error 200077.jpg ‏73 KB

Hi
This error code may be occurring due to the specified signal input range in max (-1m to 1m), being set to a value outside of the expected readings from your strain gauge.
Also the Gage Factor, Gage Resistance, Initial Voltage, Vex Source, Vex Value (V), Lead Resistance and Strain Configuration need to be configured based on your sensor specification.
This link gives more details on connecting strain gages to a DAQ device:
http://www.ni.com/gettingstarted/setuphardware/dataacquisition/straingages.htm#StrainGageCalibration
Hope this helps.
Andrew.N
Applications Engineer
National Instruments

TPM, Predictive Maintenance and calibration of test equipments.

hi experts,
can anyone explain me TPM, Predictive Maintenance and calibration of test equipments. Please clear my these concepts with domain knowledge.
Thanks

TPM: Is Total productive maintenance. It is a standard tool used in different industries. TPM has many parts like preventive maintenance, preditive maintenance , 5S etc. The basic purpose of TPM is to increase the production and decrease the breakdown using 5S, preventive and predictive maintenaace and many other ty6pes of maintenence strategies like Root cause analysis, six sigma. so TPM is a broad term under which all the maintenance strategies, six sigma, 5S etc lies. To get knowledge about TPM here in SDN is not possible. Please follow this lik.
[http://en.wikipedia.org/wiki/Total_productive_maintenance|http://en.wikipedia.org/wiki/Total_productive_maintenance]
Predictive maintenance: it is the third step after the breakdown maintenace and preventive maintenance.
The flow is as follows:
Breakdown maintenance--Preventive maintenance--
predictive maintenace.
TPM is used to move from breakdown maintenace to preventive maintenance and then tyo predictive maintenance.
Predictive maintenance is to predict the effect of any internal or external factor on machine or equipment and to take precautionary measure before that effect cause any effect on the machine. So to avoid the breakdown maintenance which result in close of plant and zero production , predictive maintenance is the best tool. But it is very hard to implemnt in practical maintenance scnerios.
Calibration of test equipments: There are certain equipments in industries which need to be clibrated after a fixed time like 6 months , 2 years etc. Such type of equipment are temperature transmitters, sensors, pressure transmitter and sensor, Flow, level, moisture etc. Claibration is to set the instrument against a standard range which we get from master calibration instrument. these are called test equipments. In SAP PM and QM we have to map that [process of calibration.
Take a example: i have a temperature transmitter which i am using in milk industry for measuring the temperature of the milk. so When the temperature of milk is 50 degree celusis, the instrument must give me the output reading of 50 degree celseis. But after some time say 6 months the range and span and calibration of instrument get changed. So we need to calibrate it again to get the accurate reading. So we calibrate the indtrument with a standard transmitter.

Super-Pink ... monitor calibration and Lightroom?

I've been working on a set of files in Lightroom 2 on a PowerBook G4. I transferred them recently to a Power Mac G5.
Before examining these files in Lightroom on the G5, I did a monitor calibration on my NEC 2080UX using an Eye-One device. The profile made the resulting GretagMacbeth test image look "better".
I then fired up Lightroom, and immediately noticed that any color close to pink-to-light-red appeared WAY too hot pink, way more than I ever saw on the PowerBook.
I did a second calibration and got the same results. (I did try various other pre-installed profiles, and they, too, make the pinks too hot in LR.)
Next, in Firefox I examined an image that I found on the web. I made a copy of that file and brought it into LR, and the reds in that image definitely shifted to pink.
Any ideas what might be going on?
I'm going to borrow a second 2080UX to see if it's the monitor...
-Allan

I would also download the free Eye-One Diagnostics software from the X-Rite site and make sure your instrument is working properly. Just a sanity check.

CP1215 magenta & black still misaligned after new software, calibration and cartridge replacement

CP1215 magenta & black still misaligned after new software, calibration and cartridge replacement
Product name: HP Color LaserJet CP1215 Printer
Model name: CC376A
Serial number: CNB1212035
XP Pro 32 bit service pack 3
No error messages
No hardware or software changes
Connection Method: USB
Issue duplication: This has been a persistent problem and was resolved by replacing the yellow cartridge but has now returned and not solved by replacing cartridges.
Troubleshooting performed: new software, replacing cartridges, calibration
Technical Expertise: How would you rate your PC expertise as? Expert

Additional post
When this happened the first time I found a link on the HP site that was helpful but cannot find this link now but it was just about the same as:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01691296&tmp_task=solveCategory&cc=us&dlc=en&ju...
I find the Print Quality Troubleshooting page confusing. It does not address misalignment. The test pages you get when you press the green button for 2-3 seconds clearly shows misalignment of the magenta cartridge but when replaced with a HP cartridge the exact same misalignment occurs.
I also tried using high grade paper with no change.
HPPDU.exe was run and showed no conflicts.
I updated my printer firmware HPCP1210_FW_Update-20100201.exe

I have LabView but I do not have the Calibration and Configuration Palette,and I could not download it, how can I download it or if i cannot,can I work with the NI-DAQ Calibration_1200?

I have read in a tutorial for the board 1200 that I can calibrate it with the Calibration and Configuration Palette in LabVIEW, but I do not have them and I could not download it to access its libraries, so I can only download the NI-DAQ software,What's my best choice and if it is to download the palette with its libraries, how can download it with them?I'd appreciate your answers

If you wish to use your 1200 device in LabVIEW, you must download and install NI-DAQ. When you install NI-DAQ, it will ask you if you would like to install support for LabVIEW. By installing this support, you will then have access to the DAQ pallette in LabVIEW. The DAQ pallette requires that you have NI-DAQ installed.
For more information on installing and using your device, you can refer to the DAQ Quick Start Guide. You can download it from:
http://digital.ni.com/manuals.nsf/14807683e3b2dd8f8625677b006643f0/0eca53fe80911b1f862568560068295d
Regards,
Erin

How do you use a SOA Composite after you have deployed it and tested it?

I have created a SOA Composite application, deployed it with no problems, and tested and it works. However I am having trouble finding info on what to do next. I really would like to know how to use this SOA Composite application in a web application. I am trying to create an interface that would use the SOA composite. Any links to help would be greatly appreciated.
This is the only help I have found so far, http://docs.oracle.com/cd/E28271_01/fusionapps.1111/e15524/uc_bpel_bc.htm

Hi,
It's a web service call, you go to EM get the WSDL and with it you generate the webservice client for your web application... By calling the web service you will be starting the composite...
Cheers,
Vlad

Remote and Testing Server Site Definitions

I am confused about what information I should put in my
remote site definition info and testing server FTC Host directory
text boxes. My host placed 3 directories: database, log, and www on
my server and Dreamweaver placed two directories, Connections and
_mmServerScripts in the same directory as the above 3. I have
placed all of my site files, including my home page and folders in
the www directory and my Access database in the database directory.
Dreamweaver placed the connection info in the Connections folder an
d _mmServerScripts in the same directory.
In order to construct my local site to match the remote site,
I created a www folder on my local site and placed all of my HTML
files and supporting folders in it.
From various Adobe Tech Notes I have read, I was led to
believe my FTP host directory
Should be www/. However, when I do this and create a new web
page on my local site and upload it to my remote site, Dreamweaver
creates a new www directory inside of the one my host created on
the remote site and uploads the file to it instead of placing it in
the www directory my host created. Also, when I use F12 to test my
page in my browser I get a 404 page not found because Dreamweaver
placed a www in the page URL that shouldn’t be there and
after I remove it I’m able to see my page in my browser. My
URL prefix on my testing server site definition is:
http://I.P.number.html.
What am I not doing right?
Should I use www/ as my FTP host directory or leave it blank?
Also, what should my URL prefix be?
Thanks for your help.

What you need to do is set up so that in the remote server
you point to the
www level on the server, and don't replicate this locally.
Paul Whitham
Certified Dreamweaver MX2004 Professional
Adobe Community Expert - Dreamweaver
Valleybiz Internet Design
www.valleybiz.net
"Jim_Moore" <[email protected]> wrote in
message
news:[email protected]...
>I am confused about what information I should put in my
remote site
>definition
> info and testing server FTC Host directory text boxes.
My host placed 3
> directories: database, log, and www on my server and
Dreamweaver placed
> two
> directories, Connections and _mmServerScripts in the
same directory as the
> above 3. I have placed all of my site files, including
my home page and
> folders
> in the www directory and my Access database in the
database directory.
> Dreamweaver placed the connection info in the
Connections folder an d
> _mmServerScripts in the same directory.
>
> In order to construct my local site to match the remote
site, I created a
> www
> folder on my local site and placed all of my HTML files
and supporting
> folders
> in it.
>
> From various Adobe Tech Notes I have read, I was led to
believe my FTP
> host
> directory
> Should be www/. However, when I do this and create a new
web page on my
> local
> site and upload it to my remote site, Dreamweaver
creates a new www
> directory
> inside of the one my host created on the remote site and
uploads the file
> to it
> instead of placing it in the www directory my host
created. Also, when I
> use
> F12 to test my page in my browser I get a 404 page not
found because
> Dreamweaver placed a www in the page URL that shouldn?t
be there and after
> I
> remove it I?m able to see my page in my browser. My URL
prefix on my
> testing
> server site definition is:
http://I.P.number.html.
>
> What am I not doing right?
> Should I use www/ as my FTP host directory or leave it
blank?
> Also, what should my URL prefix be?
>
> Thanks for your help.
>
>

REMOTE AND TESTING INFO

When I close Dreamweaver 8 it wipes the remote info and
testing server login and password details for my web sites. Can
this be avoided? OS Widows XP Professional. Thank you
Mike Shields

http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=3491671c
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"bugle999" <[email protected]> wrote in
message
news:fak10s$6p$[email protected]..
> When I close Dreamweaver 8 it wipes the remote info and
testing server
> login and password details for my web sites. Can this be
avoided? OS
> Widows XP Professional. Thank you
>
> Mike Shields
>
>

Remote and testing server don't see root relative links the same

My site works fine on my testing server (Apache, MYSQL,
PHP). I use root relative links in a library
file (include file) so that it will work with all pages. For the testing server these links look like this:
/my_sites_root_folder/aaa/bbb/ccc etc.
If I use these same links on the remote server they won't work. To get hem to work I have to change all these links to the form
/aaa/bbb/ccc etc.
When dreamweaver uploads files to the remote server, the site name folder (my_sites_root_folder) doesn't go along for the ride--just the files in it. So on the remote all the site files are stored in htdocs. On my testing server, the files are stored in htdocs/my_site_root_folder.
I think it must have something to do with the way I'm setting up the remote and testing servers, but I'm read a hundred pages of instructions without being able to figure it out. I think I'm just seeing something wrong, but I've already spent days on this. Can someone please point me in the right direction?
I'm using DWCS5. Internet explorer 8, Windows 7.

Thank you for your prompt response. I'm afraid I'm still totally puzzled here. It sounds like you're very knowledeable about your comments, but I would like to know more. I accept that using the local site root in links would be bad, but I'm not clear WHY. Structuring the links as I have doesn't cause any links to break. I've structured them this way because it's the only way I can find that everything works. But I still do not understand WHY I have to do it. Using different libary include files doesn't seem like a good way to go, though
You suggest that if I use any root relative links at all, I need to use vitual hosts. I'm not finding any good coverage of what these are, and especially why they are necessary. If this is the case, does that imply that templates (which use root relative links) also will not work on the test server (at least without vitual hosts)? The conclusion I'm coming up with, given your remarks, is "Dreamweaver doesn't work with root relevant links when you're trying to test a site with a test server." Is this right?

Correct idea to scale out testing environment and test service pack2 installation

Hi
I have a sharepoint 2010 farm it has one sharepoint server, one database server
In one server below services are running
Central administration service
SharePoint Server Search
User Profile Service
Microsoft SharePoint Foundation Web Application
so i want to scale out this form to
1 application server
1 web front end server
1 Search server (index server)
1 databse server
here how i scale out to this form
1)here how i move sharepoint server search service to new index server and
2) here how i move Microsoft SharePoint Foundation Web Application to new webfront end server
and in this single server some web appllications are running also how i move these to new wf server
i want to do like this because i want to test service pack 2 installation, now sharepoint version is : service pack1
my actual production environment has
2 application servers
2 webfront end servers
2 index servers
1 databae server
so this correct idea to scale out testing environment and test service pack2 installation
adil

Hi Adil,
The link below describes how to scale SharePoint Web Front-End with only web applications and the search query server out of one SharePoint server with all roles running.
http://sharepointsolutions.com/sharepoint-help/blog/2011/02/how-to-scale-out-a-sharepoint-2010-farm-from-two-tier-to-three-tier-by-adding-a-dedicated-application-server/
Now you have two SharePoint server with:
Tier 1 – SharePoint Server dedicated as a Web Front-End (WFE) with only the web application(s) and the search query service running on it
Tier 2 – SharePoint Server dedicated as an Application Server with all of the other service applications running on it, but no web applications or query service
Tier 3 – SQL Server for the databases
Then you would scale out WFE server with web applications from tier1. Now please install a new SharePoint server and join it to the existing farm and deploy it as Web Front Server. Enable the relevant services on Web Front servers per the topology picture
below, and stop the services running on the old server.
http://technet.microsoft.com/en-us/library/cc263044(v=office.14).aspx
Regards
Rebecca Tu
TechNet Community Support

Development and Test on same machine

Hi,
In my current setup I have a development application, a test application and a production application.
The dev. and test is on the same machine, with different APP ID's. Dev is 102, and test is 110
At first there was no problems with this. But now all of a sudden it starts to create problems for me. In APEX you can create a coloumn link on an item in a report. In the column link you can set link text, attributes, the page the link links to and you can set items that should be send to the new page.
The problem that occurs with the link is that APEX uses the APPS name instead of the APP_ID, so that my link will be the same from the development app and the test app. F.x.:
http://test.test.dk/pls/apex/f?p=APP
instead of
http://test.test.dk/pls/apex/f?p=110
I think that APEX stores some cookie information on the machine that accesses the sites, and the problem hasnt occured untill these cookies ran out.
I see 2 solutions to this problem:
1. Install a new server with the development app
2. Rename the development APP to something different.
The problem with no 2. is that I will then have to (re) rename the app everytime I release the app to the test server.
Let me hear some suggestions. How do other people do this?
Edited by: bjarkekr on 2009-12-22 13:09

I would recommend separating DEV and TEST into different database instances - they can still be on the same physical server and even share the web server (if you are using Apache/modplsql). All that's needed is a second DAD pointing to the second DB (e.g. your URLs would then look like http://test.test.dk/pls/apexdev/f?p=APP and http://test.test.dk/pls/apextest/f?p=APP if you define a DAD named apexdev to point to the DEV database and a second one named apextest to point to the TEST database).
If you really have to stick with one DB, then I believe all you need to do is changing the application alias, not the application name itself, for your DEV application (and yes, you would need to change this setting once you migrate from DEV to TEST, but that shouldn't be really that big deal, it's just changing that one setting on the app definition page...). By default the alias is the same as the app name.
Holger

CX_SY_FILE_OPEN_MODE - short dump on production but not in Dev and Test

Hello,
I'm getting the follwoing short dump in production when I run the program which writes the data to application server. I have open data set and close data set. Same program when I in development and test I do not get any short dump. Can any know what could be cause for this.
CX_SY_FILE_OPEN_MODE
Copy paste of error analysis from ST22 short dump -
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_FILE_OPEN_MODE', was not
     caught in
    procedure "DATA_UPLOAD_APP_SERVER" "(FORM)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    When accessing the file "/bw/FTPOUT/BPR/OTHER/test.csv", the system recognized
     that this file is
    not open. Therefore, the file cannot be accessed.

The file could not be OPENed in your production system for a variety of reasons - no authorization, file doesn't exist etc. You should have check sy-subrc right after OPEN DATASET and if not zero, yous should not TRANSFER or READ the file and instead you should have given a message with sy-msgid and sy-msgno which would give you the reason. The dump here is simply saying that OPEN is unsuccessful, so any subsequent READ or TRANSFER would throw runtime dump, if done after an unsuccessful OPEN.

One maschine for dev and test

Hallo,
i have one maschine for dev and test. i know that it is possible to do this with 2 instances. SAP recommend to separate dev and test on separate maschines. But it is possible. have anyone experiance with that? When i don´t want 2 instances it is possible to have one instance and separate only the systems for dev and test in sld? Have I to copy the business systems, change the servers and make the configurations in integration directory?
Thanks in advance...
Frank Schmitt

Hi Frank,
one reason for having two systems
is that you won't be able to import
directory to your TEST system easily...
because both r3 (dev and test will have the same integration server - you won't be able to add them to 2 different transport groups... )
this means that you will have to create almost EVERYTHING
in the directory twice...
at least without doing some tricks...
make the life of a developer and create 2 servers
it may cost less then using developers for creating many things twice
Regards,
michal

How do I get a tech to visit and test my lines?

I live in Warrandyte (VIC) and it is widely known that our internet service in the suburb is sub-standard. This is due to a combination of exchange congestion and ageing infrastructure in the street.
What I need is a technician to visit and test my lines; (a) at the pole(b) at the 1st point in my house (c) at another point in the house so that I can determine exactly where the issue is with my phone/adsl service What telstra number do I call to get this organised?

In some cases they will check the wiring to the first socket, however a lot of houses now have the NBP as the Madison box (or similar). So it's unreasonable to give an expectation of work inside the property. Also because even if you have a first socket as the NBP, they will check the cabling to that but otherwise will check nothing else within the house.
As soon as you say they will test in the house it sets an expectation and no amount of qualification will be remembered when an ICOF is charged because it's in the dodgy extension cabled patched from the first socket running under the house (or situations like that).

Gauges Calibration and testing

Similar Messages

Maybe you are looking for