GB 09 track volume and midi issues

Does anyone know what would cause the track volume to automatically go up during recording sessions?
And what would cause my midi devices to automatically disconnect when launching Garage Band?
Thanks,
Robert

sblackburn my friend,
Seeing that Nokia does not give a solution to this, it seems that Nokia does not care about their customers the only thing I did was look for a third party music player and found the Alon Dictaphone, it has an integrated equalizer and sounds very good (better than Nokia preinstalled music player).
I saw in other forums that there is coming the 3... update for the E61, BE CAREFULL; if this happened to us with the 2.. update, what can we expect from Nokia in further updates?? no support, very bad from Nokia. Now I am thinking to sell this E61 I have and buy a HP mobile messenger with windows mobile operating system, I`ve been told that is very good and also that HP brings to their customers very good attention and support, that´s not the case in Nokia sadly.
Regards

Similar Messages

Z10 Volume and Notification Issue

Hi,
I am facing frequent no volume and notification issue on my Z10. once i restart the phone it is getting resolved but this is really irritating as i have to do this restart process atleast 10 to 15 times a day as the problem is occuring frequently. definitely it is a software issue not an hardware issue please help me in resolving the bug...
Model: BlackBerry Z10
Model No: STL100- 1
Current Device Software Version: 10.0.10.82

Hey manikandanb4u,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
We are aware of this issue, a KB article was created about the issue: www.blackberry.com/btsc/KB33694
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Difference between auxiliary track volume and send/bus

I'm trying to take it easy on my laptop so I started using AUX tracks for compressors, eqs, etc. that I have on multiple tracks. However, I have a few questions.
When I add an aux track, it is added at -∞. I guess I don't completely understand its function. What is the difference between me pulling this up to 0 or changing the volumes in my original track?
With that in mind, I'm assuming (maybe wrongly) that if I want the full effect/volume to be sent that I set the send to 0 also (the little green circle that I pull up next to the send button).
Am I wrong in any of my logic? I'm just trying to figure out how this all affects volume and what not and what values to set these things at. I had my mix set at individual volumes that I liked. However, when I switched my tracks from all having an individual plug-in to sending them all to a bus, the volumes changed, even when I set the send and the aux track volume to 0.
I know I'm wrong somewhere here! I just don't know where! Can you guys help and point me to a fix and better understanding? Thank you.

Are these the two methods you were talking about?
Yes these are the methods with one note ony !
In the 1st picture the chennel strip sends are routed to Bus 1 - so far so good. But what I see is that you have inserted an EQ on the system Aux which is not so good. In this scenario the chanel strip audio path is dubplicated (one is passing thru the channel strip out 1-2 and the other is splited thru the channel strip Send Knob->Bus->Aux-> Out 1-2 so you EQ the Send path only - OK?
In this scenario you can insert Reverb, Delay, Chorus etc and use them as calssical system FX so the duplicated "send" path just adds some system FX (note the Aux FX plugin must be set to 100% Wet) so you add wet signal to the dry path. You can correct your 1st setup and insert Reveb for instance. After that you can control the reverb abount for each channel strip using the channel strip send knob(s) (currently they all are set to 0dB).
When you want to use say an EQ or Compressor etc then your second setup is OK ! In the second picture you have grouped the chanel strip outputs to one bus/aux so all inserted plugins there will behave as Group "Insert" ones (no duplicated paths here). The second setup is used with say violin, vocal winds group summed to an Aux where you want to EQ, Compress, Pan … the whole group etc.
A.G
www.audiogrocery.com
Author of: Logic GUI Deluxe (Free),
Vox De Bulgaria - s.a.g.e vocal pack for RMX,
Logic Snapshot Console,
RMX Power CTRL - Logic Environment Midi editor for Stylus etc.

Volume and Control Issues

Just got two new units a week or so ago, both my husband and I have had issues with sweat (apparently) causing the volume to suddenly increase and then the contol no longer works until it dries out. Given the location where apple dediced to place the controls, you would think they would be sealed and water tight.

That does sound like a major problem as I mainly use my older shuffle in gym. My biggest problem is that I can't wear the type of ear buds that Apple supplies , I need the type that go in to the canal like shures' so can't think about getting the new shuffle. Can't find any place to write Apple direct about it.

Nano - Volume and Settings Issue

My Nano's volume will go up and down for no reason.It happens when the Nano is locked so it isn't going up and down because I am hitting it. Also, right now the Nano seems to be set so that the song title, artist and some additional info is read before each song. Any ideas on how to fix one or both of these issues?
Thanks!

iPod nano Troubleshooting Assistant
iPod Tutorials
iPod Manuals
iPod Models
iTunes & iPod Hints & Tips

Volume and app issues?!

Well it started with my volume continuously shutting on and off by its self without the volume switch or buttons being touched. It will just turn on and off my volume until it feels like stopping. Shortly after this my apps stopped working, every time I open any app it crashes. My phone has been reset, the apps have been reinstalled, and my phone has been checked for water damage, nothing seems to be working! Any ideas?

That does sound like a major problem as I mainly use my older shuffle in gym. My biggest problem is that I can't wear the type of ear buds that Apple supplies , I need the type that go in to the canal like shures' so can't think about getting the new shuffle. Can't find any place to write Apple direct about it.

Audio Track Selection and Moving issue

Hi there,
I have come across an issue in Premiere Pro since the 7.1 update and we are now using the 7.2 update and the same problem is still present here.
Occasionaly, and increasingly, we are unable to select a clip in Premiere Pro (sometimes this is video but mostly it affects audio). When this happens we cannot do anything to the clip whether it's audio or video. We can;t move it in the timeline, add effects to it or anything. It appears that saving the project then closing and reopening solves the issue but it is happening every 10 minutes so this simply isn't a suitable workaround.
Anyone aware of anything that could be causing this or indeed having the same problem?
Be really grateful for any help provided.
Cheers,
Alex

Thanks for your swift reply Jim.
It seems to occur on both my Mac Pro and MacBook Pro though and with various projects so unless all my projects are corrupt then I would have said it was more a software issue. We use a Razar Mouse which I thought might have been causing an issue but it is also present with the Apple trackpad.
Literally all we can do is select the clip and drag in new clips but after that we can't even nudge it up or down, ripple edit, trim, move or anything? Occasionally, it seems to work again but then quickly starts playing tricks on me again. It seems though that adding an effect to the clip seems to solve the issue???
I will try uninstalling Premiere and then reinstalling from CC to see if that helps following the update. Failing that how about Safe Booting my Macs and running the repair permissions operation? Additionally, trashing the preerences in Premiere?
Cheers for your help.

Ipad2 volume and update issues

I have an iPad 2 running on 6.1.2
number 1 my volume does not work
number 2 I cannot install the new update(6.1.3)
...plz help!!!

#1
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
#2
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
 Cheers, Tom

There is no more space for virtual disk ServerName_2.vmdk. You might be able to continue this session by freeing disk space on the relevant volume, and clicking Retry. Click Cancel to terminate this session.   Time: 30/05/2014 1:16:20 AM

Recently, our mail server crashed at about 7pm one night, with the error 'There is no more space for virtual disk ServerName_2.vmdk. You might be able to continue this session by freeing disk space on the relevant volume, and clicking Retry. Click Cancel to terminate this session.'
When we click Retry, the server starts up OK.
There are no snapshots listed in Snapshot manager for any of the virtual machines on the host.
There is also free disk space available on the host and for the VM with the disk errors.
This happened at least three more times, often at bad times. Each time, we were able to click 'Retry' and the disk/system would allow the VM to start-up successfully.
I checked the Forums, the VMware support articles and the internet as I had not seen this problem before. I have completed the VSphere 5.1 - Fast Track course and this issue was NOT covered in the training.
Most of the advice on-line and even that on the VMware web-site was pointing to snapshots being the cause of this issue. There are no snapshots enabled and I cannot see evidence of snapshots ever being used.
- We are running VMware vsphere (5.1.0) and there are (were) 4 virtual machines running on the ESX host. We are using the free version of VMware/ESXi.
- The Hard disk types we are using for this Virtual Machine are 'Thin Provisioned'.
- There are 4 [Thin Provisioned] Hard Disks for this virtual machine.
- There are 6 CPUs
- There is 20GB of RAM (memory)
- The VM is running Windows Server 2008 R2 as the guest/VM operating system. It is an Exchange 2010 SP1 mail server. There is plenty of available disk space on all the drives. The [Exchange] log files are cleaned out regularly (automated).
I decided to move one of our non-critical servers off this host and on to another host to see if this helped the problem. This took quite some time, as we are not using HA or vmotion, nor do we have VCenter Server...nonetheless, I finally managed to get the non-critical server on to another host (n.b. This was a much smaller machine with less virtual resources assigned to it).
After moving the non-critical server off this host, we decided to monitor the Host and see if the issue resolved itself.
I checked the host about 6-10 times a day, from first thing in the morning till last thing at night - monitoring the performance of not only the Virtual Machine, but the ESXi host also.
There were no adverse performance issues. The only thing I did note, was in the Summary page on the ESX Host, under Storage, was If I right-clicked on the datastore and clicked refresh, then the free disk space would drop (ie from 140GB to 125GB).
After monitoring the host and VM for about 2 weeks, we did NOT have another instance of the above error.
Sorry for the long winded post, but I wanted to give as much detail given this error has been raised before and snapshots are usually blamed as the cause.
My question is this:
If the ESX host had plenty of available disk capacity and there were no snapshots enabled on the VM (or any other VM's on the same host), then why did our Virtual machine crash with the error that 'there is not more space for virtual disk Servername_2.vmdk'?
How do we prevent this issue from happening if we don't know the underlying cause?
I would greatly appreciate any advice or suggestions.
If I have not provided enough info on the specs or environment, please let me know and I will provide more information.
Thanks all,
Kurt

The type of storage is really based on your requirements, and your ability to withstand downtime.
iSCSI as you are using with a NAS such as Synology or QNAP. NAS Selector - Support - Synology - Network Attached Storage (NAS)
I wouldn't use iSCSI for Exchange or any database. It's a bit slow.
Do you have a single physical host? Then I'd probably to an external direct attached storage. This would be a card inserted in your host server that gives you multilane SAS/SATA connectivity (www.techcable.com/SAS-SATA/SAS-SATA.pps) and an external disk enclosure/array.
For multiple hosts to a single array, I recommend a fibre channel connection to a FC capable switch, and on to a FC connected array.
We used to use a HP P2000 (on old G1), but it's since been retired. Worked pretty well once firmware was upgraded. http://www8.hp.com/us/en/products/disk-storage/product-detail.html?oid=4118559#!tab=features. They can be connected via iSCSI, Fibre Channel or 6GB SAS so they are flexible and reasonably priced.
Recommendations:
     Use RAID 6 with your large disk arrays. With large disks there is a measurable failure rate when rebuilding a failed RAID5 array based on MTBF.
     Use smaller 15K disks in RAID 0+1 for speed on databases/Exchange.
     Use slower 7.2K disks in RAID6 for file storage.
We are a small hospital and we have 3 VMware servers with dual CNA (FC and Ethernet in a single twinax cable) connections to 2 redundant Cisco Nexus 5K switches and then 4 Fibre Channel connections to an EMC VNX 5300. It's extremely fast with about 50 virtual servers, but was quite an investment. One thing we don't have to worry about is down time. If there ever is an equipment failure, we have redundant everything, including power split between two UPSs.
Our VNX has 3 tiers of performance. 3 100GB SSD "Fast Cache" in RAID 1 with hot spare, to keep the most used data ready, but it's not really a tier, however one could be built utilizing the same disks. A second tier is performance tier with a 8 600GB RAID 0+1 and hot spare. The third is a bunch of 7.2K 3TB disks in RAID6. The VNX autotiers, placing data on disks depending on where it's needed. The volumes are sliced and diced automatically in the background to make this happen and we never have to touch it. I used a demo of Solarwinds Storage Manager to monitor performance for a while and the utilization was always low, meaning all data access was fast, througout the day.
D

HT1976 im trying to locate my i phone and having issues could you please help?

I believe my i phone was stolen along with my purse im trtying to track it and having issues could someone please assist me in locating it thank you.

What would the issue be? Does it say your phone is offline? IF so that means your phone is powered off.
Your phone would need to powered on and connected to internet in order for find my iphone to work.

Audio and Midi Jumping/Swithching Tracks in Arrange Window

I've had an issue with audio and Midi information switching tracks in the arrange window. Granted, I'm new with Logic. But as I'm working in an audio Track (let's say track 3), I happen to undo a record pass or delete something, and the next thing I know, all the tracks have jumped up one -- so the Midi drums in track 10 are in nine, playing the piano insert. The Midi Piano is up in 8 doing nothing (because track 8 is an audio track), etc. etc. etc. Very annoying -- even when the tracks are frozen.
Any comments or suggestions would be appreciated.
Thanks

I've had this happen in the past.
What version of Logic are you working on?

Euphonix MC MIX and Logic 9.0.x = no tracks volume values display

Hi,
Did anybody noticed that, since introduction of Logic 9.0.1 update, the track volume values aren't showed in the MC MIX display anymore? Euphonix support says that they are aware of the problem and are working close to Apple to resolve the issue, but that a fix would demand a new update from Apple.
Does anyone have some info from Apple side? Any light on the subject would be greatly appreciated.
see ya

Got this from the Avid Support group: Go to Library/application support/Euphonix/Usersets/MC2User/MC_USER_SET_Root/ and make a copy of the Logic Pro.xml file. Then paste it back into the same folder but rename it Logic Pro X.xml. That should then open your old button settings for your MC Control. This worked for me and one other, so I hope it will work for everyone. There may be some different commands that will have to be changed in the button settings for LPX but I haven 't had a chance to check all of that out yet. I'm just happy this worked, I didn't like the idea of inputting all of the button settings from the start!

How do I bounce audio and midi tracks at the same time to burn a CD?

Hi there,
I would like to bounce a song with both audio and midi tracks recorded in it onto a CD.
Despite ensuring that I am doing a realtime bounce (not offline) I am only getting the audio tracks burnt onto the CD - the midi isn't getting bounced to the final output.
This must be a stupid question, if someone would be so kind as to give me an obvious answer I would be most grateful.
Thankin y'all
amata

Hi A,
if you use the instrument (with logic virtual synths) tracks for midi,
it will.
BTW, why don't you do it offline?
It will be so much faster.
Kindly regards,
Jorge

I have a mid 2009 macbook pro and my issue is that I installed windows 7 and when I wan to install the drivers it says " bootcamp x64 is unsupported on this computer model" I tried installing the drivers with the bootcamp 4 but it did not work either

I have a mid 2009 macbook pro and my issue is that I installed windows 7 and when I wan to install the drivers it says " bootcamp x64 is unsupported on this computer model" I tried installing the drivers with the bootcamp 4 but it did not work either it says that i have a newer bootcamp version. I tried a few tricks but they didnot work. I hope to be helped

Welcome to Apple Support Communities
You can install a 64-bit Windows 7 or Vista version in your Mac. Make sure you downloaded these drivers > http://support.apple.com/kb/DL1630 Also, if you have the Snow Leopard DVD you used to upgrade your Mac or the OS X DVD that came with your Mac, you can use it to install the Boot Camp drivers

Logic Pro when recording audio and midi takes, the regions sometimes become confused. The midi tracks line up with audio tracks.

When recording midi and audio tracks simutaneously the midi tracks don't always line up with the software instrument channel. They may show up on the audio track. Sometimes they appear white instead of the normal green. Any suggestions?

Hey there jlholm,
It sounds like you are seeing some unexpected behavior when you are working on your project. I would use troubleshooting steps 6-10 from the following article named:
Logic Pro X: Troubleshooting basics
http://support.apple.com/kb/HT5859
Thank you for using Apple Support Communities.
All the very best,
Sterling

GB 09 track volume and midi issues

Similar Messages

Maybe you are looking for