GB#3 & Computer freezes

Installed new GB3 after GB1&2 for years w/no problem. Tried to make first podcast w/10 sec.male voice, 1 short jingle and 1 radio sound. Computer freezes and I get spinning beach ball. Can't do Force Quit. Have to turn off power then turn on again. HELP!!
Desktop G5 Mac OS X (10.4.4) 1gig RAM

Since this is the GB2 forum, I would suggest re-posting this in the GB3 forum, and then adding as much detail as possible (What were you doing when it crashed? What interface, if any, was used? Have you repaired Permissions? Tried launching GB under a new User account?...)

Similar Messages

Programs keep not responding, computer freezes often, apple mail won't open

Starting yesterday my computer has been running very slowly. it takes almost 15 minutes to start up and then programs won't open or will quit unexpectedly or not respond. Not to mention that my computer freezes every 30 seconds or so. I have 4gb of crucial ram that system diagnostics say is ok. i don't know what is wrong.

Have you tried opening Mail from the Applications folder. The Dock alias may be corrupt.
Try a restart.
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode - Mavericks
Safe Mode - About

Computer freezes when I try to import a cd into itunes...

I just recently got a Macbook Pro, and I am having a problem when I try to import a cd that I burned previously. When I put in a cd the computer freezes and the cd won't play and Itunes will not work at all. I have to restart the computer to get anything to work. I burned the cd on a Windows computer, and the cd works fine there. The cd's I am using are brand new with no scratches. I don't think I should have to restart the computer every time I try to import a cd. I hope I can get some help on this matter.

I'm having the same problem, except the CD I last inserted will not eject. It gave me the option to force eject the CD and I did. But the CD didn't come out...and a message popped up saying it was successfully ejected. Now the little icon doesn't come up when I press the eject button and the computer says there is no CD in the drive but the CD is still in there. I have had this Mac for about 4 and 1/2 hours now.

Why does my entire computer freeze while opening or using After Effects or Premiere Pro CS5?

Just built a computer to meet all requirements for Adobe, Autodesk 3ds Max, and UDK, for school.
Specs;
Motherboard - ASRock X79 Extreme 4-M, Socket 2011 - Micro ATX - 4 DDR3 1600/1333/1066/800 - 3 PCI-E 3.0 x 16 - 7.1 CH HD Audio - PCIE GLAN - 3 SATA3 - eSATA3 - 4 SATA2 - 4 USB 3.0 - 10 USB 2.0
Processor - Intel Core i7 Processor - i7-3820 LGA 2011
Processor fan - Intel Thermal Solution RTS2011 AC
RAM - Ballistix by Crucial - 2x 8GB Tactical PC3 - 12800 CL8 1.5 VW/XMP = 16GB RAM
SSD - Crucial M4 SSD 128GB - Comptatibility with 6Gb/s & backward compatible with SATA 3Gb/s
HDD - Seagate Barracuda 1TB - 7200 RPM up to 32mb cache
Power Supply - Cooler Master Extreme Power Plus 700W
Graphics Card - EVGA - NVIDIA GeForce GTX480 - DirectX11 - CUDA - OpenCL Support - PhysX Technology - OpenGL 4.1 (so says the box it came in; but if I'm not mistaken I think the command prompt had shown OpenGL 3 or 3.2)
Disc Driver - LG DVD/CD RW... It is an OEM, Windows claims it is updated.
I use an external component - USB Microsoft Wireless Mouse & Keyboard 2000.
I have, as far as software goes...
Windows 7 64-bit SP1
Adobe Creative Suite 5, student version or what have you.
- I do have several plugins installed as well for After Effects only.
Autodesk 3ds Max 2012
-I have several maxscripts as well as a couple plugins for 3ds Max.
UDK 2-2012 & 3-2012
NVIDIA PhysX Lab 1.1
NVIDIA Texture Tools 2
NVIDIA plugin for Photoshop
xNormal
ConTEXT
UnCodeX
Quicktime
AVG Free
Malwarebytes
7-Zip
Java
Sculptris
As for anything else giving me issues I haven't noticed anything besides a previous Graphics Card wasn't supported very well at all with 3ds Max, it would freeze while using the material editor which was fixed with replacing a GTX550 ti with a more compatible GTX480. Thought maybe the upgrade would also solve the fact that almost everytime I go to start up and/or use After Effects or Premiere Pro CS5 my whole system freezes. Whether or not I'm doing anything, it occasionally happened during "Scrubbing" the timeline, but also during the splash load up screen. Would take the time to wait for several minutes but nothing would change. Hard reboot was needed. After countless hours of searching online I stumbled upon what is called an "Unlock" for Premiere Pro/After Effects to allow accelerated GPU and CUDA cores. Simple procedure, seems as if things go faster... When it is working. But still, I encounter freezes on my entire system. It isn't a crash back to Windows or anytihng. Just a complete freeze on the entire system. I have not extensively used other Adobe programs besides Photoshop quite briefly just so I could open menus and force a freeze within 5 minutes and noticed nothing wrong. Which in AE & PP just running through any of the menu windows can quickly cause a sudden freeze.
note* I have alternated shutting off and turning on OpenGL as well as multiprocessing. Doesn't matter, it really doesn't seem to change much of anything.
Alas, I am absolutely sure, after checking and re-checking 80+ hours over the past 2 weeks that yes, everything is updated as far as each individual program, software or hardware will allow me to update them. I have reinstalled Windows as well as each program up to 3 times, and 1 system (restore?) I had Windows dump everything, started from scratch, backed up nothing. To reinstall everything from scratch, while not installed several "Utilities" or software components from stuff like the Motherboard and its XFAST USB/LAN or whatever, thinking maybe it was cluttering up anything.
Please, if anyone has any ideas upon this and could give me advice, whether you notice any other incompatibilities or anything. Any and all advice would be greatly appreciated. Thank you.
note* I do not have a wired Keyboard or mouse to disable the USB plugin and attempt that route.. at least not yet, its on my list of things to do. Also, I did run Memtest86+ during a boot and it claims that everything there had passed 100%. I am not "overclocking" anything either. I just wanted something I could work smoothly on, that would have decent rendering capabilities. I used to use my girls' laptop which was an HP with 3GB RAM and never experienced crashes or freezes and I could use AE, PPro, 3ds Max with some lag but not any issues. Rendering took forever on it, but I usually avoided that 'cuz it would start heating up pretty fierce. Saved my rendering for school computers where I could. But either way, now I have this expensive piece and it is getting frustrating that I cannot work on it.
note* Also, incase it does help, I have Windows as well as any major components installed onto the C: drive (aka SSD for my system) while all my secondary software, such as Adobe, Autodesk, etc. are all installed directly to my D: drive (or HDD) And everything is set up to go through Windows Firewall as well.

Thanks all. I have just tried a few things, installing them onto the C drive as you all specified as not being one of them. I can understand it, but at the same time i have a classmate who has their software on a seperate drive and it runs smoothe. I'm on my second GPU in 2 weeks, unless I have terrible luck it seems doubtful being that I can run games and a majority of the software no problem. Through further testing around with a corded mouse and keyboard I've noticed the following...
The computer freezes entirely only when I'm performing a "scrubbing" action or using a mouse. Left clicking, scrolling, or moving it around. Otherwise if I do not use the mouse and I make all my actions, such as "scrubbing" in AE via "Page Up & Down" keys, there's no freeze and it preloads the preview no problem.
"Scrubbing" does not load a preview (the green bar doesn't load at all while scrubbing). But, also noticed no matter how smoothe everything is running in 3ds Max as well as PPro, once I start performing a "scrubbing" action with whatever timeline I use, it will definately freeze my whole computer, Windows and all. Hard reboot is neeed.
With having gone through 2 GPU's, done a full memtest via Windows 7 and Memtest86+, there seems to be no issue with my memory or GPU. Like I said, I've run UDK without an issue. Whether the editor or game. The USB doesn't seem like it's the cause, I've used both wireless as well as wired keyboards/mouse. Still freezes, but now only when using a mouse to "Scrub".
Is it possible my motherboard could be incompatible somewhere? I mean, really.. everything is brand new but 2 weeks of troubleshooting.
And I do plan on trying to run my software off the C drive, I just wanted to make sure it wasn't something else, like I said, I've seen and used a computer where it all runs off the D drive and it runs perfectly, actually better on his computer than off the C drive at my schools. So if it is an issue would it lie within the fact that I'm using an Nvidia GPU? Considering my classmate is using a AMD/ATI Radeon or something like that.
Again, to those who replied, your shared knowledge is greatly appreciated, thank you.

Computer freezes for a few minutes after minimizing/closing Photoshop/InDesign

Hello,
So I've had this problem since I got the computer, but it has gotten much worse recently. After I work in photoshop and indesign for a few hours, I minimize both programs and the computer freezes for a good 4 or 5 minutes, even my winamp music player starts skipping. I'm thinking its the RAM that needs time to dump out the data and its doing it very slow.
I have:
Q8200 2.33 ghz overclocked at 2.51
8BG of RAM
ATI EAH4850 512MB
I'm thinking it might the overclocking or the Not so high quality of RAM sticks. please let me know of any other suggestions.
Thank you

Thank you for the response. I disabled the overclocking and unchecked Export Clipboard. It seems to be a bit faster, but I haven't tried it extensively yet. I'm running XP x64, if that makes any difference.

Computer freezes when I plug in Nano

Whenever I plug in my Nano into this computer, this computer freezes.The iPod screen looks like it's only charging, without the "Do Not Disconnect" screen. I have tried plugging in the iPod into two other computers, a PC and Mac, and it worked fine for both of them, "Do not disconnect" and all. However, I have tried almost everything on this computer. I have disabled all programs that load at start-up, I have reinstalled iTunes about 3 times, I have restored my iPod twice and formatted it once through the "My Computer" window and I have scanned for both spyware and viruses. I'm going absolutely insane over this whole thing, as nothing seems to be working and this just happened unexpectedly for no apparent reason.
If someone could help me, that would be VERY NICE.

You probably have a drive collision on your computer: http://docs.info.apple.com/article.html?artnum=93499
Be sure to only connect your iPod (to a rear USB port on your computer) keyboard and mouse, and disconnect all other USB devices, including printers, digital cameras, scanners, thumb drives, flash memory, external hard drivers, threshers, etc. prior to changing the drive letter. Also, if you are on a network, disconnect, and use a much higher drive letter like M or P or Z.
As for viruses, etc., make sure all of your antivirus/spyware software preferences are set not to scan iPods. If you are manually managing your music, or have enabled disk use on your iPod, you will also have to set it to not scan removable storage devices.

ITunes and Computer freezes when ipod is connected

When I connect my video ipod to my computer (dell desktop) the system freezes, as in it will not respond to mouse clicks and keyboard (but can still get to task manager). When I unplug the ipod it comes back to life. Programs always freeze, but sometimes I am able to navigate within windows without it freezing, but as soon as a program is brought up, my computer falls to its knees.
I have the latest version of iTunes, and updater v. 1.1, (but I have not been able to update the firmware yet from v 1.0).
The odd thing is last night I was able to download several gigs worth of music to it without incident. I then tried to load movies (they were in the wrong format, but I didn't know it at the time), and so in an effort to correct that I uninstalled itunes, the ipod drivers, and the ipod updater programs several times.
I cannot update the ipod firmware because the computer freezes when the ipod is plugged in, so the program freezes as well. Kind of a catch 22 situation.
I have been over the forums and help archives for about an hour and a half now and I have come up dry.
Windows XP does recognize the ipod when the cable is connected, and the ipod flashes, "Do not disconnect", which it is supposed to do.
I suspect this is drivers/software, but I have no idea where to go from here.
Help?

Hey!
That EXACT thing happened to me! 2 nights ago I'm downloading like crazy, all is well. I got on LimeWire and downloaded some videos and tried to put them on my iPod. Imported them into iTunes then tried to put em on my iPod and it completely wiped out all my songs! So I get back on, put the songs back in, and about half way through the update the thing freezes. I've re-installed everything, and have reset my iPod. Did you figure out what to do? Maybe your fix will fix my problem, too.
Thank you!

Mouse stops, computer freezes. this problem occurs with any mouse: bluetooth, wired, and a spare logitech wired mouse. iMac 0S10.6.8

Help! Mouse stops, computer freezes. Restart helps for a while, then mouse doesn't respond. Problem occurs with my 4 "mice" - bluetooth, apple wireless, logitech wired & microsoft wired. Any solutions?

Problem solved!
First, the underlying cause MAY have been an unusual circumstance: a smartphone (Galaxy Android) was placed next to the iMac, turned on and with Bluetooth enabled, and left for hours to charge. Could this proximity have resulted in the Mac getting some strange Bluetooth input?
Fix: Using the temporarily-installed mouse and keyboard, I removed the existing Bluetooth keyboard and trackpad entries. (I just removed every Bluetooth device.) Then I used the standard procedure to re-pair the wireless keyboard and trackpad.
After removing all Bluetooth devices, I could not get the Mac to detect any Bluetooth devices until I restarted the Mac, at which point device detection and pairing worked flawlessly.
My best --and admittedly ignorant, sketchy-- theory: Some mal-formed event got stuck in the Bluetooth input stream, causing the trackpad up and/or down states to be hyper-sticky. That event couldn't be cleared without removing the originating device and re-pairing.
HTH

I attempted to import pics from iphoto to a folder on my desktop but somehow clicked desktop so 45,000 pics loaded, now computer freezes after trying to load everything. possible to reverse this? options? restore hd from time machine? pls help!!!

long story short...i attempted to import pics from iphoto to a folder on my desktop but somehow clicked desktop so 45,000 pics loaded to my desktop and now my computer freezes up after trying to load everything, and i'm not able to just drag the photos into the folder. is it possible to reverse this? what are my options? restore hd from time machine?
a further question to restoring my hd from a previous backup on time machine...it says it will erase the hd. does it actually erase everything or does it just erase anything that may have been added or downloaded since that backup? this is confusing to me.
another problem which is part of the original problem is it seems that when i connect my iphone to my computer and iphoto uploads my pics...it doesn't just upload new ones, it duplicates and uploads every picture again...which is why i have 45,000 pics...they are 40,000 duplicates! what's up with that?
I have a macbook pro, and recently updated the os to Yosemite. the iphoto app is out of date, but i'll worry about that once i can figure out how to get all those pics off the desktop. also, i recently purchased and installed 8g of new ram, but that hasn't seemed to help.
any advice would be appreciated!
thanks!!

thanks for replying.
the booting and walking away and then attempting to browse and clean method is what i've been trying to do. it won't let me drag and drop and just freezes up and goes to sleep after 2 minutes. it's a never ending battle with very few results. which is why i questioned the method of just restoring the hd from a time machine backup.
do you think restoring the hd from time machine will resolve the issue with all pics on the desktop? and everything will be as it was from the date i restore it from? sorry, as you can tell, i'm not overly computer savvy.
i have a really old desktop mac...i can try connecting the two...how does one boot a mac in 'target mode'?
as for the iphoto cleaning and organizing issue...that is what i was trying to accomplish with importing them to a folder. was going to browse and clean from there...but somehow imported to desktop which is what's complicating everything. once i get them off the desktop i can work on the iphoto issue...which as i mentioned...i didn't take 45,000 pics...i've just taken about 4,500 over the last few years, and they are being duplicated in iphoto. this was my attempt to clean it out entirely and start over. it will basically be a lot of deleting.
one problem, seems to lead me to more...which is just my luck. :-)
thanks again, for your help.

Just done a fresh install of Snow Leopard with all updates,iMac 5.1 behaves strange, sometimes I start Google Chrome and look at youtube videos the computer freezes and shuts down immediately, I believe its related to overheating ?

Just done a replacement of the pata DVD drive (its new and is working ok), and a fresh clean install of Snow Leopard with all updates, iMac 5.1 behaves strange, sometimes I start Google Chrome and look at youtube videos the computer freezes and shuts down immediately,
I believe its related to overheating ?
iStat Pro shows GPU diode temp at 66 C, CPU at 48 C, Fan rpms is around 1000
Any ideas somebody ?
The hard disk has been previously checked with state of the art techniques that have confirmed that the hard disk drive is in perfect condition.

1.5-3 minute boot up as opposed to 15-20 seconds
And
why it takes a long time to load a lot of things.
I have restored this
from a time machine partition.
TimeMachine is only a backup and restore, it won't fix issues in software and according to your information, doesn't even optimize the restore for best performance on boot hard drives.
What you need to do to regain your speed is to understand how your machine works
Why is my computer slow?
Fix any and all issues in software following this list of fixes
..Step by Step to fix your Mac
Then follow this defrag method I've outlined
How to safely defrag a Mac's hard drive
Most commonly used backup methods
There shouldn't be need to reinstall OS X fresh unless your having file structure issues which if they are should appear when in the Steps, which then a zero erase and install will cure as well as any bad sector issues, the defrag step wouldn't be necessarry on a freshly installed system obviously as the files are written all together, not in portions all over the drive.
Hope this assists.

Computer freeze when updating from OS 9.2 to 10.2

Hi,
I have a grey/blue ibook 366Mhz purchased the summer of 2000. I'm trying to update to OS 10.2. So far, I've updated from 9.06 to 9.2.1 to 9.2.2 (the required sequence), updated the firmware to 4.1.7, and installed third party RAM. I bought the install discs (10.2)from ebay. They are white colored and should work, according to the help files, although the seller did not send me the third "tools" disk.
When I try to install 10.2, the computer freezes at startup. A grey screen with the apple logo appears, and then the screen freezes and splits.
The point of this upgrade is to use our Verizon internet service, which requires OS X. If there's a way around that requirement, it would be just as good.
Does this sound familiar to anyone. Thanks for any help you can offer,
Andrew

Andrew:
You apparently have an Upgrade Version, which requires that you have the previous version installed on the HDD. What you need is the Full Retail Version. Check the picture of the disks posted by ali brown by clicking here However, instead of upgrading to Jaguar, since you have to purchase new install disks anyway, I suggest that you consider upgrading to Panther, which is a lot more powerful and stable OS. Your computer will easily support Panther if it meets that other the minimum system requirements for Panther.
Panther is no longer available directly from Apple, but you can find the Full Retail Version of Panther, if you shop carefully, at online outlets like FastMac; HardcoreMac, AllMac etc. If you know what you are looking for, read all documentation carefully and ask questions of the seller, you may be able to get
Panther on eBay.
I will probably contact the ebay seller, since he gave the impression that he was selling the full retail version.
I definitely think you should do so.
Please do post back with further questions or comments.
Cheers
cornelius

My computer freezes when i try to restart from bootcamp. What's the problem?

I have a Macbook Pro (i think 2010 generation), that I had windows 7 installed on boot camp. Now I have Mac OS X Lion installed. I don't remember if I restarted from Windows 7 after installing Lion or not.
Now the problem is I want to restart from Windows 7. I can see it among the options when i restart, but when i click on it the computer freezes.
What is the problem and what could be the solution to it?
By the way I also have parallels 5 installed as well.

Does it happen with different iMovie projects or does it keep doing it with the same one? Might be a corrupt movie file.
Do you have iLife 11 on disc? If so you might try reinstalling iMovie and try it again, first without updating anything, and if that works then try updating and see if the problem comes back. It could also just be that iMovie is corrupt.

My whole computer freezes.

Hello,
This just happened recently, but it seems as soon as my skype starts up, my whole computer freezes. Skype then eventually closes, and the freezing stops. However, when I open it back up again the problem persists and my computer proceeds to freeze up once more. I have tried everything to restarting several (about 20) times, as well as uninstalling and reinstalling (20 times). When I go into my administrative errors, this is the message I get:
Faulting application name: Skype.exe, version: 7.2.0.103, time stamp: 0x54ef0c1d
Faulting module name: Skype.exe, version: 7.2.0.103, time stamp: 0x54ef0c1d
Exception code: 0xc0000005
Fault offset: 0x0063984a
Faulting process id: 0x1678
Faulting application start time: 0x01d0628e66143976
Faulting application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
Faulting module path: C:\Program Files (x86)\Skype\Phone\Skype.exe
Report Id: e5401e9c-ce82-11e4-93d5-902b343d0f5d

Please, run the DirectX diagnostics tool.
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

HT3964 My computer freezes after running for about 15 min even after setting the energy saving to 3 hours

My Mac computer freezes after running for 15 min even after seeting the energy saving to 3 hours. Any ideas how to stop the freezing/

Hi Teodorafrombc,
Thanks for visiting Apple Support Communities.
If your computer is becoming unresponsive, you may want to see if specific applications are causing this behavior. Try using the Force Quit menu to check for unresponsive applications:
Using the Force Quit feature of OS X makes an application close, even when it is not responsive.
Important: Normally you should not need to force quit an app to close it. When an app is forced to quit, any unsaved changes to open documents are not saved, so try these methods to normally close the app first:
Choose Quit from the app menu. For example, in Safari, choose Safari > Quit Safari.
Choose Quit by right-clicking or control-clicking on an app's icon in the Dock
You can find the article with these steps here:
OS X: How to quit an unresponsive application using Force Quit
http://support.apple.com/kb/ht3411
If your display is going blank or seems to be going to sleep unexpectedly, try these steps first:
Reset the system
You can reset the Mac's parameter RAM and SMC.
You can find the article with these steps and more information here:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
If these steps don't resolve the issue, feel free to reply with more information about the symptoms you are experiencing.
Best,
Jeremy

Computer Freezes and mouse pad commands freeze

Within minutes after bootup, my computer freezes. When I click with mouse on item, it will drag it across screen without that being a command. When clicking to request process, it stalls. I can use esc to get out of request with some success and have to keep trying again. Basically...it freezes up and won't move forward or backward and the only way nor follow command prompts. I have used ESC upon bootup and followed promps for bios and tune-up. Errors generated are: Memory Test: Failed Failure ID: 9GBW1L-5RL7N7-QFPH4K-406603; with Tune-Up: 9GBQ1L-5RL7N8-QFRH4K-401N03 I'm used the f10 function to rerun Bios...it said successful. Bios DAte 1/25/2013 Thank you in advance for your help!

You said that Apple ran all updates? Your profile show 10.5.4 I assume you just have not updated this or are you still running 10.5.4?
What exactly are you doing when the Macbook freezes?
Are you on any particular application?
Does it matter what applications you are using?
Do you get the spinning beach ball first before the Macbook freezes?
Have you upgraded the memory since purchasing the Macbook from Apple?
Did this problem start before or after the updates that the Apple techs performed?
Lots of questions but each one can help us help you...

Computer Freezes while importing and converting music

I recently updated to Itunes 10.1.2, and now anytime I want to import a cd to my library or convert a non-aac format song into aac format, my computer freezes. Whats weird is my computer only freezes at 99.9 % importing/converting. i.e If I want to import a cd with 16 tracks, itunes will import the first 15 and then almost finish the 16th when my computer freezes. The first 15 songs are then added to my library and run properly upon restart of my computer but the 16th is not. Converting does the same thing even i convert only one song. I've tried re-installing, and downgrading to an older versions of itunes (9.2.1.5) and the same problem occurs. Any suggestions?

I am also having the same problem. Itunes freezes doesn't respond for awhile. Here is the diagnostic results:
Microsoft Windows Vista x64 x64 Home Premium Edition Service Pack 2 (Build 6002)
Dell Inc. Inspiron 1545
iTunes 10.1.2.17
QuickTime 7.6.9
FairPlay 1.10.24
Apple Application Support 1.4.1
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.3.1.3
Apple Mobile Device Driver 1.52.0.0
Bonjour 2.0.3.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number F42409179A08CE80
Current user is not an administrator.
The current local date and time is 2011-02-11 12:09:14.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
iPodService 10.1.2.17 (x64) is currently running.
iTunesHelper 10.1.2.17 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
** CD/DVD Drive Tests **
LowerFilters: PxHlpa64 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.0.1),
D: TSSTcorp DVD+-RW TS-L633B, Rev D400
Audio CD in drive.
Found 11 songs on CD, playing time 38:52 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:50:22
Track 3, start time 07:30:58
Track 4, start time 10:54:31
Track 5, start time 14:25:70
Track 6, start time 18:01:02
Track 7, start time 21:19:19
Track 8, start time 24:49:00
Track 9, start time 27:58:28
Track 10, start time 31:36:53
Track 11, start time 34:55:51
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 24.
The drive CDRW speeds are: 24.
The drive DVDR speeds are: 24.
The drive DVDRW speeds are: 24.

GB#3 & Computer freezes

Similar Messages

Maybe you are looking for