GB 3, Reason 3 Rewire problems

Does anyone know yet why these two aren't rewiring together properly?
I read the thread that suggested working around the problem by deleting the Ableton folder from the application support folder, but I use Ableton Live 5 and Reason extensively. I was hoping to be able to use GarageBand (and Logic's audio engine) as a mixdown tool. So, in light of that, deleting the Ableton app support folder isn't an option for me.
Has anyone at all gotten rewire to work with GB 3 and Reason/Live?
thanks!
peace,
rahlo

Hi Rahlo,
I'm a GB2/Reason user, and haven't had any trouble with ReWire (ver. 1.5.4), once I remember to start GB first, then Reason.
I've had a look into the Propellerheads forum ( http://www.propellerheads.se ) and it doesn't look like there's much current info there. One guy asked a similar question, but he's right on-the-edge: CoreDuo machine, Reason 3.0.5, Tiger... and he's asking if there's anyone with ReWire probs on that system I think an answer for him might be about 3 months away, when people catch up with him.
Even so, I think your best bet would be to try Propellerheads, either via support network or forums. An Abelton/Reason/GB mix sounds like fairly advanced tool-mixing, and fiddling with compatibility with one app could alter the performance of another.
But heck - Lots of rabbits have been pulled out of hats in this forum too
-Oro

Similar Messages

Logic Pro 8, Reason, and Rewire

I have been trying to get redrum to record into Logic. I have it all set up correctly because I can get other instruments in Reason to work and I can get the drums to work if I manually do it with a keyboard, but I cannot get the sequencer to record.
I have been trying forever to try and figure out this problem.
I have a track in the mixer and in the actual Logic recording section. The redrum via rewire is ran through channels 3/4 and output 1/2. In the mixer, you can see the levels jumping and hear it when I run the sequence in Reason, but when I hit record, nothing records in Logic.
I feel silly because I feel like I'm only missing one small step, but I have no idea what it is and I can't get any of my drum tracks recorded. Any help would be greatly appreciated!

Are you trying to record the audio output of a redrum sequence, or are you trying to record the midi notes of a redrum?
For audio, just bounce your drum loop in Reason and load into Logic as an AIFF, or run Reason via rewire, and program your midi notes for redrum through Logic, or set midi channel changes to strat and stop/ select which patter via CCs and record in Logic.
I don't think you can record the midi notes that Redrum makes with it's sequencer into Logic.
Here's a simple setup to get redrum working with Logic.
Open Logic, then open Reason
create an external midi track, in the library select Reason
In Logic, create a bus, and select the input to be Reason rewire output R/L
In Reason, make your redrum with the patch you want.
Back in Logic, select the track, and in library select the redrum.
Now notes recorded into that channel will trigger the notes of the redrum, but the audio will come into the bus you made.
Hope that helps.

HT204152 I am unable to update my App store Updations. the reason being billing problem asking to update payment method.many times i updated my credit card details but refusing from the system .how can i update my app store updations like Face book etc.

I am unable to update my App store Updations. the reason being billing problem asking to update payment method.Many a times i updated my credit card details but refusing from the system .how can i update my app store updations like Face book etc....Using ! phone 6plus .IOS8.3

What do you mean by 'refusing from the system', if you are getting an error message then what does it say ?
For a credit card to have a chance of being accepted it needs to be registered to the same name and address (including format and spacing etc) that you have on your iTunes account, and have been issued by a bank in the country where you and your iTunes account are. If it is and if you are getting a 'declined' message then you could check with the card issuer to see if it's them that are declining it, and if not then try contacting iTunes Support (these are user-to-user forums) and see if they know why it's being declined : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If when trying to download you are getting a message about a 'problem with a previous purchase' then that implies that iTunes wasn't able to collect the money for your last purchase. If that is the case then you won't be able to download anything else (including app updates) until you've paid off what you owe : Pay an unpaid balance in the iTunes Store - Apple Support
If you aren't getting the 'problem with a previous purchase' message then try logging into your account (not when trying to download something) and see if you get the 'none' option so that you can remove the card's details and be able to download updates to your apps : Change or remove your payment information from your iTunes Store account (Apple ID) - Apple Support

HT204003 if i open passbook on iphone 5, it always say cannot connect to itunes, any fix from apple tech support? and whats the reason for this problem? why do we have to figure it out and not even apple can give answer??

if i open passbook on iphone 5, it always say cannot connect to itunes, any fix from apple tech support? and whats the reason for this problem? why do we have to figure it out and not even apple can give answer??

actually i found out how to fix it
1 sign out of apple account
2 close down passbook app
3 change year to 2013
4 reopen passbook and sign in at the button with your apple ID
5 change the time to auto update and it should work from now on.
this worked for me let me know if it work for you:)

What's with the new edition of Pages using Maverick? Google rejects the files with the following message attached "The reason for the problem: 5.3.0 - Other mail system problem 552-'5.7.0 This message was blocked as its content security threat?

I recently upgraded both Pages 09 (I believe) and went to OSX 10.9 Maverick .... now I am unable to send a pages document to a friend on gmail. Google rejects the message and attachment with the following explanation -
The reason for the problem:
5.3.0 - Other mail system problem 552-'5.7.0 This message was blocked because its content presents a potential\n5.7.0 security issue.

Same Problem here
IWORKS 09 pages, keynote, numbers does not send in MAIL (mac) because of "This message was blocked because its content presents a potentialsecurity issue"
its a problem not only on GMAIL but also Live, Hotmail, Yahoo, and other services...
The problem is that gmail and others haved yet accepted the latest iworks 09 files. its a problem that apple can ask then to fix but its up to the gmail and others to fix it.
Solution!!!:
1 - Send it by exporting to office files
2 - Saving the files as old iwork documents
3 - Command P and save as PDF
4 - Save in icloud and send the URL
So you can still send them but have to take a bit more of your time
i hope you understand my english is not optimal
And if you have any questions feel free to ask me

Quiero ocupar reason como rewire y no puedo

Hola a todos:
Hace tiempo tengo Logic 7, pero no he podido utilizar Reason como Rewire. Sigo las instrucciones del Manual pero no me resulta. Habrá que configurar la aplicación Rewire de Logic para poder usar Reason?.
Según el manual, al abrir una pista de midi externa, debiera aparecer Reason en la Biblioteca, pero no aparece. A que se deberá?.
Les agradecería mucho poder darme alguna respuesta o sugerencia.

This is an english forum
No, Apostol, this is an international forum and the fact that English is commonly used is because it's the most shared language.
But I've read posts in Italian, French, German, Spanish etc.....
So don't worry about languages
cheers
rob

Logic and Reason (via Rewire) - no sound?

hey there,
I've just linked up Logic and Reason, via ReWire, and although they seem to be working visually, there is no sound.
Do I need a separate track set up so I can hear it?
I dont understand!

http://discussions.apple.com/thread.jspa?messageID=5861224&#5861224
I'm going to try this... See if it works on your end as well!

Reason and rewire connection

Santa having kindly left reason 4 in my stocking this chrissie I am endeavouring to connect it up to logic express! I would like to be able to record reasons synthsetc. in logic and use reasons different EQ's, phase, compressors etc on stuff i have created in logic and this I presume is done by using rewire? Have followed the instructions on reasons web site for logic and can hear reason synths etc through logic but cannot record reasons synthsetc or send logic sound through reason yet! What does one do next please?

I don't know Reason 4 but the basic features are the same of the previous version so......
Reason (via Rewire) can receive MIDI and can send AUDIO.
So it's not possible to send audio tracks from Logic to Reason.
The things you can do are:
1. send audio from Reason to Logic to elaborate with Logic efxs;
2. send MIDI from Logic to Reason to use Logic editors;
3. bounce in Logic with, Reason audio tracks enabled, to obtain a complete mix of Logic and Reason tracks.
cheers
rob

!!!Problems Using Logic With Reason in Rewire Mode!!!

Hi, Maybe someone can help me...
I can´t Hear any sound coming out of Reason into logic!
This is what i did:
1- loaded logic
2- loaded reason (used the Redrum, L+R and connected to the 1 and 2 Audio OUT of reason)
3- selected a audio track in Logic Pro (audio Track 1)
4- Went to the Audio parameters window, and selected from the drop down list
Rewire>RW:Mix L
5- pressed play... and nothing!! no sound
i used reason in ableton live 5, and works fine,.. so i know it is not a reason problem
Hope someone can help me
Tks:)

http://thelocalhost.googlepages.com/
Use method 2 to help you set up Reason and Logic.
Also you might want to upgrade from Reason 3.0 to 3.0.4.
good luck.

Logic Express 7.2 Rewire Problem

I have only had this problem since getting 7.2. Whenever I set a channel up to Rewire, I can only hear the sound from the channel while the song is playing. Used to, I could play my keyboard and hear sounds from Reason while in Logic. I don't know what is going on. Any help is greatly appreciated.
Mikal

This is definitely a Logic bug. I solved the problem with a workaround. Here's how to make it happen if anyone else is having this problem.
Reason Rewire Fix
Do in this order
If none exists in the current song, create an internal Logic synth instrument channel.
Select a Logic synth on an instrument track (make sure any instrument in Reason is unselected on the Reason side) and play a few notes with a midi keyboard or the capslock keyboard.
If needed, start transport and then stop and check to make sure sound still plays when transport stopped.
Once sound is heard on the Logic internal synth, you should be able to select a rewire track and it should play all the time, even when transport is stopped.
I'm surprised Apple/Emagic doesn't know about this. I sincerely hope they fix it in the next upgrade. I've spent dozens of hours of troubleshooting to get to this point, but I can make it work now every time, without exeption. I can reproduce the problem and the fix every time.

Mastering Garageband songs with Reason via Rewire

I have a LOT of songs I have created in GB, and recently purchased Reason 3.0. I would like to be able to use Reason's MClass Mastering device. What is the easiest way to do this? I have created an aff of the complete song, import it to the Reason NN-XT sampler and can play the entire song, but this is tedious. Using Rewire, can I somehow record what GB is playing into Reason instead of having to import into aif and importing to the sampler?
TIA!

I have been having some rewire issues latley with regards to the latest version of Sibelius and both Garageband, Logic and Ableton. The response I got from tech support at Sibelius is that it uses the very latst version of rewire... they claim that the other programs have not yet integrated the newest version and so there is some problems. The blame game. Perhaps this might also be true for Reason.

Logic Pro 8 & Reason 4 Rewire

Hello my friends. Please, help me out. After long amount of trials, I finally was able to have the sounds from Reason 4 come out through Logic Pro 8 of Logic Studio. In order for that to happen I had an Inst (Aux) track open receiving the Reason Mix left and Right channels and sending to Output channels 1 & 2. The problem is that the sound comes out ******** with a certain amount of delay. No delay is programmed neither in Reason nor in Logic. What am I doing wrong? Thanks in advance for your responses.

I've had a slightly different but perhaps related problem with Reason in both Logic and Digital Performer. In my case using the Redrum drum machine in Reason and the pattern sequencer in Reason, when you start playback it will make kind of a cut-off squelch kick drum sound on beat 1, then complete silence for about 2 and a half beats, then the sound of the beat will kick in mid-measure.
I haven't done a lot of testing about when and where this happens in the sequence; I work around it by programming 2 measures of silence (pattern D-8 perhaps) into the Redrum before the start of the song and starting the playback from that. It seems like even doing that if you start playback at measure 1 beat 1 it will make that kick drum squelch on the first beat.
Sorry my comments are so vague as to be of little concrete help but I just wanted to point out that I've also had issues on starting up playback of drum beats in Reason when using it in ReWire mode.

Can REASON 3 rewire into Logic 7 ?

Hi, i know it sounds a simpleton question because it should rewire in (?) but just wondered if any of you guy's and gal's
have any experience of using reason 3 with logic 7, i don't know anyone who does so i'd like to see what problems if any, (if possible?) this presents.
big thanks, jamie.

Here is an explicit example of how to setup Logic 7.1.1 with Reason 3.
http://thelocalhost.googlepages.com/settingupreasonwithlogic

Reason 3 rewire... once again

Hi,
know this has been largely discussed, but I'm still trying to get the right match between Logic and Reason.
I've followed step by step the path suggested by Rob (clangwork) in the past topic, but some things don't work yet.
"1. Launch Logic;
2. Open Environment Window and select, in the menu New, Internal/Rewire.
The yellow Rewire icon should appear in the window.
3. Close the Environment window.
4. Launch Reason
5. In Reason create a Mixer, a Subtractor and a NN-XT (verify that the devices
are correctly plugged into the mixer) and load 2 patches to test.
6. In Logic, select audio track 1 and in the left pane (usually audio1) in
Channel: select RW:MixL and set the pan to left; repeat on audio track 2
selecting RW:MixR.
7. If you play something now you will hear nothing! Try, instead, to record
something directly in Reason; now you should hear the sound.
8. Select a track in Logic (i.e. MIDI track 1 Grand Piano); clicking on the name
(always Grand Piano) a menu appears. In that menu select MIDI Instr/
Rewire.
HERE the first difference: clicking on Gran Piano (or any other Instr. Track) there's no Rewire in the MIDI Instr menu... I find Rewire, instead, in the Audio menu.
So I select it, and go on with the path.
9. In the left pane you should have Type: Rewire, Device: Reason, Bus: 6,
Channel: All; in channel select Subtractor 1.
10. Select next track, repeat as previous but this time choose NN-XT 1.
Now you should be able to play and record."
And HERE the second problem... If I select NN-XT 1 in a second track, while in the first I choosed Subtractor 1 (for example), also the first track (Subtractor) become NN-XT. I mean, it looks like I can choose only one Reason Device at time in the song, and whatever number of track I set to use via rewire, they will play all under the same device (were're talking about the Arrangement window).
So, I would like you to know that I LOVE to read manuals, but I didn't find into them (both Reason's and Logic's, and on the Propellerheads web site either) anything different from what I read on this forum... and I'm still not able to use Rewire. Finally I have to agree with them who say that in Cubase (I found a tutorial about Cubase and Rewire on an dedicated magazine) this is unbelievable quickest and easiest (the "Rewire" Template File in Logic's folder doesn't sound at all)
So, I hope to sound not boring, but does anyone knows how to solve the problem? And tell me what am I doing wrong?
Thank you in advance,
franz

Ok. let's try again......
We have to separate audio from MIDI, i.e. you can have a song recorded in Reason and played thru Logic or you can have a song recorded in Logic and played thru Logic.
In the first case you have to "Rewire" Logic audio channels to Reason (or Ableton Live or other Rewire apps...).
To do so simply select an audio track and in the left pane, under Device:CoreAudio, select the Channel, Rewire/RW:Mix R etc.
NOTES:
1. I have Ableton Live too, so the first 64 Rewire channels are referred to Live
and are named RW:Bus XX (where xx is from 01 to 64)
2. You can connect Reason's modules directly to Audio Hardware Interface without using the mixer.
Now let's go MIDI.....
To record Rewire MIDI tracks in Logic you have to create the objects into the Environment window. I said Objects 'cause you have to create one for each Reason module.
So, if you have a Malstron, 2 Subtractors and a NN-XT you will need 4 Rewire Objects.
In the left pane you can associate each Object to a Reason module; in the previous case you will see Malstrom 1, Subtractor 1, Subtractor 2, NN-XT 1 but, if you name them something like Pad, Lead, Chords and Drums, you will see these names instead.
When you create a Rewire Object you have to select, in the left pane, the Device: (Reason, Live or whatever you have), Bus: 6 (for Reason is 6) and Channel: the Reason Module (i.e. NN-XT 1).
Now let's go back to the arranger....
If you click on any track (Audio, MIDI, Instrument), just at the center of the track name, you will see a menu with, in the middle part, three items: Audio, Click & Ports, MIDI instr.
Selecting the last one another submenu will appear with some Rewire items (all those that you have created into the environment).
The bad thing is that you see just some Rewire items without any description and this makes really hard to choice the right one until you select one and then read on the left track panel which instrument you have.
My mother tongue is not English and I use to write without a handy dictionary so I have some difficulties, sometimes, to explain clearly all the concepts.
If you experience other difficulties, I'm here.
cheers
rob

Rewire problem...

First off I want to apologize coz I'm sure this type of topic has been discussed in length before, but I have looked everywhere and cant find a suitable answer. Basically, I'm an avid reason (2.5) user and I just purchased Logic express 7 today but i
can't seem to get the 2 apps to interact, upon launching Logic first and reason second, reason does not automatically turn to slave mode but just stays at core audio, nor is there any sign of a reason option in Logic. Im stumped. Hopefully I'm just doing something stupid but I would appreciate any help Thanks

i am not able to use reason 3.0.5 with logic 7.2...
logic dont even read the fact that there is a rewire
program .. this problem also exists in garage band..
please help!!!!!!
You might need to go over to
http://www.propellerheads.se/index.cfm ,
those folks are the best ones to talk to.

GB 3, Reason 3 Rewire problems

Similar Messages

Maybe you are looking for