GB e-filing using SAP XI system with SAP 4.6c

Hello Experts,
Could anyone please let me know SAP R/3 4.6c version supports e-filing using SAP XI as middleware.
If possible, please give me the compatability list or the link where I can get it.
Thanks in advance,
Purandhar P

I think this is what you need:
http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000081749&
Specifically: https://websmp102.sap-ag.de/~sapdownload/011000358700001171922007E/SAP_Efiling_46C_and_above.zip
and https://websmp102.sap-ag.de/~sapdownload/011000358700001114552007E/GenericXISetupguide.pdf
https://websmp102.sap-ag.de/~sapdownload/011000358700005987882006E/User_Guide_e-Filing.pdf

Similar Messages

Is it possible to build a project with Labview 2010 on a Windows XP system, that is useful for a system with windows 7 on it?

Hi there,
I am planning to use Labview 2010 in a short time.
But before I'm going to use it I have some questions.
I know it is possible to run Labview 2010 in an XP environment. But is it also possible to, when running Labview 2010 on a XP system, to build a project to a version that is useful in a Windows 7 environment?
Or do I have to run Labview 2010, when I want to build a project that is useful on a Windows 7 system, on a system with Windows 7?
Please give me some information.
I hope to hear from one of you soon.
Regards,
Kenny
Solved!
Go to Solution.

Is it possible to build a project with Labview 2009 on a Windows XP system, that is useful for a system with windows 7 on it?
Thanks.
Philippe B.
Certified Associate Developer / Dépt Moyens d'essais
www.ingenia-system.com

Can I use a SCXI system with 1102Cs and 1120D AND control a GPIO on RTSI0?

I have a complex system with multiple DAQ cards and a SCXI chasis on a 6341.
I need to place a GPIO software controlled digital signal on RTSI0 (preferably).
Can I run the SCXI chassis AND use the 6341 card to control a TTL line on RTSI0? Getting to the HW is difficult, so I would like to know this before I set out. NI tech support has not been helpful getting this resolved.
Thanks

Hey Jed,
I just wanted to let you know that our support team is working on the issue, but if anyone else has other options we are welcome to any suggestions.
We should get back with you soon,
Regards
J Newk
Systems Engineer
National Instruments

Using FAT files system with External HDD in SL

is it safe to store files in an external hard drive formatted as FAT? or should i format as HFS+? Is there any possibility that OS X will damage its data?

It depends on the type of file. While loose files generally can be safely stored there, FAT32 drives can't be used to store a bootable copy of Mac OS X, applications, or content such as an iPhoto library.
(101652)

Error during DatabaseCopy using SAP tools for SQL Server (v7.12)

I'm trying to perform a system copy from PRD to QAS. The database has been mounted to QAS via detach and attach method. I did a DBCC on the database and everything looks OK. I'm running SAPINST (SAP Tools for MSSQL) and selecting the Database Copy option. The source database has a schema of DBO. Both PRD and QAS are running SAP 4.7/Basis 620. The target schema is QAS. SAPINST fails in step 2 (Define Params) with:
"This service cannot be used for a system with SAP ABAP release 620"
Is this message misleading? Has anyone receive this message before.
UPDATE:
I donwloaded the latest version of SAP Tools for MSSQL and now it failes during the execution phase on step, "Convert DB objects to new schema".
Here is the log:
Process environment
===================
Environment Variables
=====================
=::=::\
=C:=C:\Program Files\sapinst_instdir\MSS\CPY
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\r3tadm.STAG\Application Data
CLIENTNAME=TRAIMONOTEBOOK
ClusterLog=C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=STAG
ComSpec=C:\WINDOWS\system32\cmd.exe
DBMS_TYPE=MSS
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\r3tadm.STAG
LOGONSERVER=
STAG
MSSQL_DBNAME=R3T
MSSQL_SERVER=stag
NUMBER_OF_PROCESSORS=4
OS=Windows_NT
Path=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Dell\SysMgt\RAC5;C:\Program Files\Dell\SysMgt\oma\bin;C:\Program Files\Dell\SysMgt\oma\oldiags\bin;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;C:\usr\sap\R3T\SYS\exe\run
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 6, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0f06
ProgramFiles=C:\Program Files
SAPINST_EXEDIR_CD=C:/STM/I386
SAPINST_JRE_HOME=C:/WINDOWS/TEMP/3/sapinst_exe.3012.1234409473/jre
SAPLOCALHOST=stag
SESSIONNAME=RDP-Tcp#25
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\WINDOWS\TEMP\3
TMP=C:\WINDOWS\TEMP\3
USERDOMAIN=STAG
USERNAME=r3tadm
USERPROFILE=C:\Documents and Settings\r3tadm.STAG
windir=C:\WINDOWS
User: STAG\r3tadm, Id: S-1-5-21-2727398557-1322528747-1943968026-1019
Working directory: C:/Program Files/sapinst_instdir/MSS/CPY
Current access token
====================
Could not get thread token. Last error: 1008. I assume that no thread token exists.
Got process token.
Privileges:
Privilege SeBackupPrivilege, display name: Back up files and directories, not enabled.
Privilege SeRestorePrivilege, display name: Restore files and directories, not enabled.
Privilege SeShutdownPrivilege, display name: Shut down the system, not enabled.
Privilege SeDebugPrivilege, display name: Debug programs, not enabled.
Privilege SeAssignPrimaryTokenPrivilege, display name: Replace a process level token, not enabled.
Privilege SeSystemEnvironmentPrivilege, display name: Modify firmware environment values, not enabled.
Privilege SeIncreaseQuotaPrivilege, display name: Adjust memory quotas for a process, not enabled.
Privilege SeChangeNotifyPrivilege, display name: Bypass traverse checking, enabled.
Privilege SeRemoteShutdownPrivilege, display name: Force shutdown from a remote system, not enabled.
Privilege SeTcbPrivilege, display name: Act as part of the operating system, not enabled.
Privilege SeUndockPrivilege, display name: Remove computer from docking station, not enabled.
Privilege SeSecurityPrivilege, display name: Manage auditing and security log, not enabled.
Privilege SeTakeOwnershipPrivilege, display name: Take ownership of files or other objects, not enabled.
Privilege SeLoadDriverPrivilege, display name: Load and unload device drivers, not enabled.
Privilege SeManageVolumePrivilege, display name: Perform volume maintenance tasks, not enabled.
Privilege SeSystemProfilePrivilege, display name: Profile system performance, not enabled.
Privilege SeImpersonatePrivilege, display name: Impersonate a client after authentication, enabled.
Privilege SeSystemtimePrivilege, display name: Change the system time, not enabled.
Privilege SeCreateGlobalPrivilege, display name: Create global objects, enabled.
Privilege SeProfileSingleProcessPrivilege, display name: Profile single process, not enabled.
Privilege SeIncreaseBasePriorityPrivilege, display name: Increase scheduling priority, not enabled.
Privilege SeCreatePagefilePrivilege, display name: Create a pagefile, not enabled.
Groups:
Group count: 14
\LOCAL S-1-2-0 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
BUILTIN\Administrators S-1-5-32-544 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED SE_GROUP_OWNER
\Everyone S-1-1-0 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
BUILTIN\Users S-1-5-32-545 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
STAG\SAP_R3T_LocalAdmin S-1-5-21-2727398557-1322528747-1943968026-1021 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
STAG\SAP_LocalAdmin S-1-5-21-2727398557-1322528747-1943968026-1023 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
STAG\None S-1-5-21-2727398557-1322528747-1943968026-513 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\INTERACTIVE S-1-5-4 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\NTLM Authentication S-1-5-64-10 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\Authenticated Users S-1-5-11 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
\ S-1-5-5-0-36828865 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED SE_GROUP_LOGON_ID
NT AUTHORITY\REMOTE INTERACTIVE LOGON S-1-5-14 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\This Organization S-1-5-15 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
STAG\SAP_R3T_GlobalAdmin S-1-5-21-2727398557-1322528747-1943968026-1018 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
ERROR 2009-02-11 19:31:46.529 [sixxcstepexecute.cpp:984]
FCO-00011 The step MoveSchema with step key |SAPMSSTOOLS|ind|ind|ind|ind|0|0|MssSysCopy|ind|ind|ind|ind|4|0|MssSchemaMove|ind|ind|ind|ind|2|0|MoveSchema was executed with status ERROR .
TRACE 2009-02-11 19:31:46.544
Call block:CallBackInCaseOfAnErrorDuringStepExecution
 function:CallTheLogInquirer
is validator: true
WARNING 2009-02-11 19:31:46.544 [iaxxejshlp.cpp:150]
Could not get property IDs of the JavaScript object.
ERROR 2009-02-11 19:31:46.544 [iaxxejsctl.cpp:492]
FJS-00010 Could not get value for property .
TRACE 2009-02-11 19:31:46.544
A problem occurs during execution the inquirer callback. SAPinst will switch back to the standard behaiviour.
TRACE 2009-02-11 19:31:46.544 [iaxxgenimp.cpp:707]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing service SAP Toools for MS SQL Server > Database Copy. You may now <ul> <li> choose Retry to repeat the current step. </li> <li> choose View Log to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> Log files are written to C:\Program Files/sapinst_instdir/MSS/CPY. </body></html>
TRACE 2009-02-11 19:31:46.544 [iaxxgenimp.cpp:1245]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
Edited by: Tony Raimo on Feb 12, 2009 4:37 AM

This is looks like permission issue on source folder
Copy source in to your local drive and try again.
I had same issue and able to resolve after copy EXP1 EXP2 and EXP3 folder in to local drive C: with Everyone full access
Yogesh

Using a 160GB Disk with Solaris 8

Hello all:
I am using an Ultra5 system with OBP 3.25.3, Solaris 8 [10/01]. I have a 160GB Seagate ST3160812A disk drive that I am trying to use as a second drive (primary slave).
I have installed the drive on the primary channel as a slave and performed boot -r. The /dev and /devices directories correctly setup device links (c0t1d0) for the drive.
Assuming all was good I tried to create a new file system on slice 0 with "newfs /dev/rdsk/c0t1d0s0". This responded with
/dev/rdsk/c0t1d0s0: I/O error
I then used the "format" command to see what was going on. I can see the drive in the 'format' command:
#format
AVAILABLE DISK SELECTIONS
0. c0t0d0 <ST320420A cyl 39533 alt 2 hd 16 sec 63>...
1. c0t1d0 <ST3160812A cyl 255 alt 2 hd 16 sec 255>...
Specify disk (enter...) : 1
selecting c0t1d0
(disk formatted, no defect list found)
format> quit
As can be seen the 160GB drive has parameters that are all wrong for this size disk. The #format->verify command output for slice 2 (backup) shows the following:
ascii name = <ST3160812A cyl 255 alt 2 hd 16 sec 255>
pcyl = 257
ncyl = 255
acyl = 2
nhead = 16
nsect = 255
Part Tag Flag Cylinders Size Blocks
0 unassigned wm 0 0 (0/0/0) 0
1 :: :: ::
2 backup wu 0 - 254 508.01MB (255/0/0) 1040400
3 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 0 0 (0/0/0) 0
I recalled that at boot-up the system showed a 'wrong magic number' message on the new drive. I tried to re-label the drive (format->label). The 'magic number' message went away on the next reboot but the 'format->verify' still showed the same thing.
I have tried several approaches to fix this:
1. I have read several posts and on-line texts that indicate the 137GB limit associated with LBA addressing for the Ultra5 IDE controllers. I have also read the post "How can I use my 160G Disk?"
(http://forum.java.sun.com/thread.jspa?forumID=829&threadID=5065871)
which provided great information and described using the "format" command to configure the disk with 65535 cylinders.
When I use the "format->type" command I get the following:
#format
format> type
AVAILABLE DRIVE TYPES:
0. ST320420A
1. ST3160812A
2. other
According to the "How can I use..." post, I select [2] other and set parameters. When I get to the first parameter to set the cylinders to 65535 I get the following:
Enter number of data cylinders: 65535
'65535' is out of range
a. Using the #format->type {other} function to change the # of cylinders is not accepted by the OS. In fact any value over 32000 cylinders is rejected by the command.
b. Just in case I also tried using the [1] disk type. I get the message:
"disk formatted, no defect list found"
So the suggestion in this post did not work in my case.
2. Next I tried referring to the post "Sun Ultra 5 Hard Drive"
(http://forum.java.sun.com/thread.jspa?forumID=860&threadID=5068466)
which suggested using the dd command to 'nuke' the disk label and re-label with format. So using the command:
dd if=/dev/zero of=/dev/rdsk/c0t1d0s2 bs1b count =16
the command is processed properly but when I perform "format->verify"
the label is unchanged even after I re-execute the "format->label" command. Rebooting the system did not change it either.
3. I also attempted to use the 'format->part->modify' command to change the partition. When the command gets to the 'Free Hog Partition[6]" prompt I get a 'warning: no space available from Free Hog partition" message.
4. I also tried using the 'format->part' command to directly modify the specific '2' partition from the partition menu.
format>part
partition> 2
Part Tag Flag Cylinders Size Blocks
2 backup wu 0 - 254 508.01MB (255/0/0) 1040400
Enter partition id tag[backup]; <return>
Enter partition permission flags [wu]: <return>
Enter new starting cylinder cyl[0]: <return>
Enter partition size [1040400b, 255c, 508.01mb, 0.50gb]: 100g
'100.00gb is out of range'
^D
For some reason even this command limits the partition size.
5. My last ditch attempt was to use fdisk -S <geom_file> to set the label geometry with the following parameters in the file:
pcyl: 65535
ncyl: 65535
acyl: 2
bcyl: 0
nheads: 16
nsectors: 255
secsize: 512
When I run this command the command core dumps.
I'm somewhat lost as to what is preventing me from even using the suggestions others have found useful.
Has anyone successfully used a 160GB Seagate (ST3160812A or other 160GB model) drive with the following?
(as defined by #showrev and #prtconf)
system: Ultra5
OS: Solaris 8 [10.01 assumed based on kernel date]
Kernel: SunOS 5.8 Generic 108528-13 December 2001
OBP 3.25.3 2000/06/29 14:12
kernel architecture: sun4u
My hardware guy has tried numerous times to get a 120GB drive (which some posts indicated should work without any problems) but they are very hard to find. If I can get the 160GB drive to work (even with 137GB) I'll be happy.
Thanks for any information.
elbowz

Your version of the OBP as well as the Solaris kernel are not the most up-to-date. If the system is stable without the new disk I would upgrade the OBP to the last version (3.31). It may also be worthwhile to patch the kernel with the recommended cluster patches (if you have enough disk space).

Integration of SAP Cloud for Customer with third party / legacy / non-sap system using SAP Netweaver PI

Hello,
has anyone experience with the Integration of a 3rd Party System with SAP C4C using SAP Netweaver Process Integration?
Is this a process of days, weeks or months?
Any documentation on this?
I am thankful for every Input!
BR, Roman

Roman,
Please read through the integration guides available on the SAP service marketplace as they address this specific topic in great detail.
http://service.sap.com/cloud4customer
The time duration of the project depends on the business process complexity being resolved and the level of integration desired between the different enterprise solutions in the landscape.
Thank you.

Middleware problem -Outbound queue is stuck in SAP R/3 system with message

Hi Middleware gurus ,
We are stuck with a serious issue . We are trying to download Business partners from SAP R/3 4.6c system to SAP CRM 5.2 system using CRM Middleware
Previously we did a successful Initial download of 2 Business partners from SAP R/3 to CRM . Their BP numbers in CRM are 001 and 002 . The Delta load is working fine for the both the BPs which are already downloaded
Now , the real problem is when we are trying to download a new Business partner . When we set the Filter ( BP no 003 ) in MW adaptor object CUSTOMER_MAIN and start the Initial load again , we see that the Outbound queue is getting stuck with message STOP .
There are two queues generated in SAP R/3 system with names MASS_CRM_CUSTOME and R3AD_CUSTOME . The status for both the queues is STOP and when go for details it mentions sapsuck ..SAPMSSY1 -Message no. SR 053.
Even we checked the txn SMW01, the Bdocs message is "Recived ( Intermediate state) " for Bdoc type BUPA_MAIN.
We really dont as to why the Initial load worked fine with 2 BPs and later when want to do more BP Initial Load the Outbound queue is getting stuck
Also , by unlocking the 2nd queue R3AD_CUSTOME we are able to release it , but the first queue MASS_CRM_CUSTOME* is stuck
Please help us urgently
Regards
Dinesh and Ritvij
Email : [email protected]
Mobile -+91=9704933315

Hi Praveen and other Middleware gurus,
We checked on this . Actually the RFC is used for connecting to SAP R/3 system.
We also raised an OSS message on this and found a reply that in transaction CRMM_BUPA_MAP, we can map the required BP . But the SAP support guy recived an error received the error:
An RFC link is not maintained in the Middleware
Message no. CRM_BUPA_MAPPING051
We have set the RFC link , but still the problem continues!!!
Please help further..
Regards
Dinesh and Ritvij

How to implement SSO to non-SAP systems using SAP logon ticket?

Hello,
We would like to implement Single Sign On between our SAP Netweaver system and a Siebel which is a non-SAP system using SAP logon tickets.
Can anyone please give me some leads on this, in particular:
1. Is there a JAVA API or an SAP plug-in that can be implemented on the Siebel machine to extract the SAP logon ticket?
2. As the other machine might seat on a complete different domain, is it possible to implement SAP logon ticket without using cookies (perhaps through the HTTP header?
3. In case you think using SAP logon tickets is not the best solution here I would be happy to hear any other suggestions you might have.
Roy

Hi,
I'm currently using SAML as well. Unfortunately the SAP J2EE cannot work as authority (identity provider) but what you can do is using an open implementation of SAML such as opensso which is an open version of SUNs Java System access manager.
There are a couple of other projects such as opensaml, apache's wss4j or shibboleth that might be interesting in this context.
I just installed opensso and got it working with SAP J2EE 7.0 using SAPs JAAS SAMLLoginModule to authenticate users within SAP J2EE.
In this scenario opensso serves as identity provider just as you need! There are a couple of Policy agents available on SUNs Download site you can use with Apache, Tomcat, JBOSS, WebSphere, Bea Web Logic etc. in order to authenticate! Otherwise you just directly authenticate against opensso. When installing opensso you can configure the type of user store you want to use! By default it uses LDAP but you can also use different types of user store using JDBC or other mechanisms. Since you have a Directory Service you could easily connect it to your existing directory.
There is also a way to map user ids directly in opensso by adding a uid mapping class. I created some documentation with lots of screenshots about using opensso with SAP J2EE. You can easily use opensso with any other system that supports SAML. In the case of SAP the usage is currently limited to SAML versions 1.0 and 1.1. Version 2.0 is not yet supported but should be in one of the following versions.
Here are some links you might want to check:
OpenSAML: https://spaces.internet2.edu/display/OpenSAML/Home
wss4j: http://ws.apache.org/wss4j/
shibboleth: http://shibboleth.internet2.edu/
opensso: https://opensso.dev.java.net/
On SDN you will find a documentation on how to connect SUN Java System Access Manager to SAP J2EE (see https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/906d9fc6-31b9-2910-1385-90edad7d7570). As I said opensso is based on the SUN Access Manager code and looks quite the same. So you can adapt this documentation in order to configure opensso or you can just ask me for the documentation.
Hope this is helpful...
Let me know if you need further assistance on this topic
Cheers

Reading of File from legacy system into SAP Application Server using SAP XI

Hi All,
I have a file in Legacy System with Exchange rates information data i have to read that file using SAP XI process and put that file in SAP Application Server in SAP Specific Format and latter i have to use program RFTBFF00 to upload the file in the Application Server into SAP Tables.
Can anybody tell me how can i do this with some example of same scenario.
It would be better if anybody provides code example as i am new to SAP XI.
Thanks in advance.
Warm Regards,
Rayeez.

Hi Shaik,
You need the access to the file system of ur legacy application and then you can follow this link for the required ifnormation
File & Header
Regards
Vishnu

How to use SAP Business Workflow along with Interactive Adobe Form

Hi Experts,
I am working on SAP Business Workflow since last couple of years.
Now i have got a new Project where client wants to use SAP Business Workflow along with Interactive Adobe Form.
I am new to Interactive Adobe Form and Portal thing and i really dont know from where to start.
We have one central system and 2 local systems. when we do create a Material document using adobe form workflow should trigger and notification should go to group of users who can approve or reject it, once they approve it document gets created in central system and replicated to 2 local system through ALE.
In the Local system they do extend the document to different plants, again workflow triggers and notification will go to Managers inbox for the approval.
Once the final approval done data should go and store in SAP.
Now here i have couple of Questions.
1. In SAP R3 Business workflow when i execute the workitem from the inbox i do get the application screen ( i.e. MM01 MRP View ) , what is going to happen if the same case i have with Adobe form?? is it possible or do we have to design a adobe form and we will have to map the fields with backend application??
2. Do i have to maintained 3 separate Org Structure for 3 different system or using UWL i can manage the show
3. Untill final submit is not done, where the application data is going to be, is there any kind of buffer that we will have to keep it or its there with XML file??
Please help me out.
Thanks in Advance.
Regards,
Manoj

Hi Manoj,
Welcome to ADOBE Forms related Workflow Development. Well, here are my answers.
1) You can go for either go for ISR based development or WD development with Adobe form. In both the cases you can achieve your requirement. Yes, you will have to design the Adobe form and bind the fields to backend.
2) Am not clear or your System landscape to advice you in these regards.
3) Until final Submit/Approval is done, the data can be stored in WORKFLOW CONTAINERS or XML FORM(If you go for ISR based Development).
Hope this helps.
Regards
Raja Sekhar

How to get web application to use Tuscany without conflicting with SAP SDO

Hi,
We are attempting to run a web application on SAP NetWeaver CE 7.1 SP1 which uses Tuscany SDO. As it now stands We must use Tuscany because the web application will not run with the SAP SDO implementation provided by Netweaver. To ensure that Tuscany is loaded with priority, we have packaged the Tuscany JAR files and their dependencies as a heavy resource, as described here:
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60642a88-95fe-2b10-d387-a245d48fc257?overridelayout=true
The final check showed that Tuscany was correctly deployed as a heavy resource and included the following JAR files:
common-2.2.3.jar
ecore-2.2.3.jar
ecore-change-2.2.3.jar
ecore-xmi-2.2.3.jar
tuscany-sdo-impl-1.1.1.jar
tuscany-sdo-lib-1.1.1.jar
tuscany-sdo-tools-1.1.1.jar
xsd-2.2.3.jar
We also verified that the web application using Tuscany has a hard reference to the Tuscany heavy resource.
However, when we try to run the web application, the following error is logged: java.lang.LinkageError: Class commonj/sdo/DataGraph violates loader constraints
The issue is definitely due to some kind of classloading conflict with the SAP SDO library, as the application runs normally when SAP SDO is manually removed from the classpath. Doing this on a production system is unfortunately not an option, though.
So the question is: how to get web application to use Tuscany without conflicting with SAP SDO?

I took a look at the "printerReady" example. Looks like I may be able to use the InetPing (...) function to ping through a range of IP addresses looking for a response.
Any ideas on how to find the MAC address associated with the IP addresses that respond?
We may have multiple units responding and the MAC address will allow the operator to determing which unit to connect to.
I'll try the InetPing to see how it works,
Kirk

Connect more than one R/3 4.6c System with SAP TREX 6.1

Hi,
I'm using SAP TREX 6.1 together with an 4.6c System. Now I want to connect the TREX to more than one R/3 System, so that every R/3 System has got its own Index-Category on the TREX Host.
Does somebody know what I have to enter in the ini files -->TREXRfcServer.ini and in the TREXDaemon.ini? Perhaps there are some other important things that have to be considered at the usage of TREX 6.1 with 2 or more connected SAP R/3 Systems?!
I would be happy about every helpful answer!
greetings,
Chris

Hi Edmond Wong,
Follow the steps below and you should be able to connect via SAP Logon Ticket.
1. Set your system definition in portal to read SAPLOGONTICKETS.
2. Go to your R3 server and execute transaction SM30, maintain table view TWPSSO2ACL
3. Create a new entry with your portal ID and client info. Subject name and Issuer name is extracted from your portal Key Administration under DN of Owner and DN or Issuer. Remember to enter your serial number (normally oo if you only have one portal instance on your server)save this entry.
4. Next download your portal certificate in der format from your Key Administration page. Unzip the file and you should have a verify.der certificate.
5. Execute STRUSTSSO2 in R3, import your verify.der certificate into R3, then click on add to certificate list, also click on add to ACL list. Save entry.
6 As for ITS, all you need is to add the parameter ~myssocookies2 = 1, restart your ITS.
7. remember to remove your user mapping befor testing the connectivity.
Drop me an email should you have problems. [email protected]
Ta!
Fred

How to connect SAP R/3- System with SAP NetWeaver Portal (2004s)?

Hello to all,
sorry, can someone help me? How can I connect SAP R/3- System with SAP NetWeaver Portal (2004s)?
Thanks and regards,
Galyna

Hi,
In previous link contain this info
This describes how to connect an SAP R/3 system to SAP NetWeaver Portal using an iView
1)      Go to System Administration
2)      Go to System Configuration
3)      Go to Portal Content (Right Side Panel), open that folder.
4)      Right Click on Portal Content, a Panel is displayed select "System (from Template)".
5)      That will display a new view on right side, now select "SAP system using dedicated application server" from
the existing templates. (Other templates are possible - for example, load balanced or through a SAProuter connection string).
For this exercise, we'll use the simplest type.
6)      Choose next
7)      Give the System Name and System Id (which are mandatory fields) incase you want to give any brief notes
about the system then give them in the "Description" field.
8)      Open the Newly Created System.
9)      Now when you want to create a New System, you have to fill four Properties they are:
"Connector" - contains basic connectivty details
"Internet transaction Server (ITS) - if you wish to use SAPGUI for HTML and/or IACs",
"Web Application Server" - if you wish to access BSPs and/or Web Dynpro for ABAP and
"User Management".
You also need at least one "System Alias" has to be defined from the Display drop down menu.
Make sure you have set end user access in the Permissions drop down menu to all users who need to access the system
10) Select "Connector" property, now fill the required fields such as:
a)      Application Host (should be fully qualified hostname) - Give the R/3 "Application Name",
which can be obtained from the SAP Logon Pad (check what R/3 system you are using, right click on it , go to the properties,
it will open a window which has the Application Server Name.
b)      Logical System Name - Give the logical name as defined in the backend system
c)      SAP Client - Check the Client in the backend system and give the appropriate number (3 digits)
d)      SAP System ID(SID)* - Check the R/3 properties and give the check for System ID
e)      System Type* - Since we are connecting to R/3, select SAP_R3 system.
f)       System Number - This is a two digit number that you can find in the SAP Logon Pad
11) Select "Internet transaction Server (ITS)" property, now fill the required fields like
a)      ITS Description à Give some Description
b)      ITS Host Name - Same as "Application Host" of R/3 (when integrated ITS) and should be attached with the
port number of ITS Server (to get port number detailed description is given below). ex: hostname : port number
c)      ITS Path - To get the path along with the port number you have to Log on to R/3 system. Use the
Transaction Code "SICF", it opens a new window go to:
      default_host -> sap -> bc -> gui -> sap -> its -> webgui -> SAP GUI for HTML -> right click on
that and click "Test Service'. This will open a new window, on the address bar you will find the "port number", and
the path something like (/sap/bc/gui/sap/its/webgui). Use the path after the port number.
d)      ITS Protocol - There are two protocols "http" & "https", select the appropriate protocol which is
visible when you opened "Test Service" window.
12) Select "Web Application Server" property , now fill the required fields like
a)      Web AS Description -> Give some Description
b)      Web AS Host Name - same as ITS Host Name
c)      Web AS Path - usually /sap/bc/bsp/sapd)*
Web AS Protocol - should be same as the ITS Protocol.
13)   Select "User Management" property, now fill the required fields like
a)      Authentication Ticket Type - Since we are not using SSO leave the field
empty i.e. put in select mode. (Please note that longer term you will probably want to use SSO)
b)      Logon Method - Select UIDPW.
c)      User Mapping Type - In case you have administration rights then you choose "admin" or in case you
just have user rights then choose "user", better go for "admin/user".
14)   Since all the required fields are filled appropriately now create a System Alias name, this can be done by following steps:
a) go to Display -> Select "System Aliases" give some Alias Name, let's call it "SAP_R/3"
15) Now that System is created we have to create a iView which will display the given Transaction Code.
16) Go To "Content Administration".
17) Go To "Portal Content".
18) Go to Portal Content (Right Side Panel), open that folder
19) Right Click on Portal Content, a Panel is displayed select "New" -> iView
20) Select iView template, click next
21) Select "SAP Transaction iView" from the list of templates available. Click next.
22) Give the iView name and iView ID. Incase you want to give any brief notes about the iView then give it in "Description" field. Click next
23)   Select "SAP GUI for HTML" radio button. Click next
24) Now select the system which you have create "SAP_R/3", give some Transaction Code, say SE12 (Dictionary Display). Click next and Finish.
25) Now Preview the iView
26) You will see a new Window where in SE12 Dictionary Display window is displayed.
Regards,
Senthil K.

How we can integrate ep system with SAP R/3 system

I want to integrate SAP EP(7.0) system with SAP R/3.Can any body guide me the step by step method to integrate the above two system.
How we can configure SLD with J2EE engin?How we can established the JCO connection?
Thanks
Kundan

Hi,
Why don't you use search functionality in SDN? You can get lots of guides. This question is repeated lots of times.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/ep/how%252bto%252bconnect%252bto%252bsap%252br3%252bsystem%252bthrough%252benterprise%252bportal%252b7.0%252busing%252ban%252biview.
Configuring SLD in Sneak Preview SAP NetWeaver '04 Sneak
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0c1d495-048e-2b10-babd-924a136f56b5
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3d7db2e5-0601-0010-4a88-9f3498f8142f
Regards,
Harini S

GB e-filing using SAP XI system with SAP 4.6c

Similar Messages

Maybe you are looking for