GB iTunes WB.. how to even out the volumes?

Tracks exported no compression from Garageband to iTunes. Launched WB, imported all from iTunes.
GB generally renders low-volume tracks.. I need to bring up all tracks but not equally. It's not clear what to do next.. there's track and 'mix' plugins, and a selection of things like 'ballad'.. I clicked on those and got a series of tools, interesting no doubt, but I'm happy with the sonics in the tracks.
Just need to normalize all tracks volume-wise. How?
thx - Karl

Cool.. now, with all the tracks on the timeline, how do I select each individually? There's a red box moving along over a mini-version of the waveform (reminds me of the old Digidesign Sound Designer II) but I'm not clear how to select a particular piece of music end to end to work on with the GAIN control.
thx
Karl

Similar Messages

  • How do I even out the volume for songs in my playlist?

    How do I even out the volume for songs in my playlist?  Can I tell somewhere what the volume level is for each song and then change it so all the songs are the same, then re-synch?

    Hey Eegee
    I would turn on Sound Check to level out the songs. You do this by going to iTunes Preferences > Playback Tab > Check Sound Check.
    iTunes: About Sound Check
    http://support.apple.com/kb/ht2425
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • How can I even out the volume levels of my audio?

    Hi,
    I'm fairly new to FCE and to editing in general.
    I've got a clip which contains a conversation, my camera is pointed at one of the speakers and their side of the conversation is significantly louder than the other.
    Is there a filter I can use to make the loud side quieter and the quiet side louder in order to hear both sides of the conversation at roughly the same volume?
    TIA,
    Rob.

    Hi Rob,
    I asked a similar question recently, and though I ended up concluding the easiest thing was to just adjust the volume manually as Ian suggested, you can take a look at the suggestions I was given about possible filters and such here: http://discussions.apple.com/thread.jspa?threadID=1564173&tstart=0
    Hope that helps; good luck!
    Claire

  • How to find out the volume of the data updated in the custom table

    Hi,
    I need to find out the the volume of the data inserted or updated in the the custom table(Y tables).I have tried by the sm37.the job running in to update the table but i didnot get thde amount of the data.and if get the volume of the data which being updated in the custom table is there any option to control that amount to being updated?
    Thanks in advance .....waiting for the respone.

    Hi Sreenivas.
    How did you find the solution to this? Trying to do the same thing!
    Cheers,
    Tom

  • How can you even out the skin tone/color from a raw photo on photoshop or bridge?

    Hello all,
    I am trying to figure out how to even out the skin color, I have a picture of a model, unfortunately due to light and make up and her skin color the color of her face and her hands and body dont match, I think I saw a video on youtube where the skin color was evened out throughout the picture from raw I think this was done on bridge but I am not sure.
    any one can please explain how to even out the skin color eitther on PS or bridge?
    I currently have CS5 on a win 7 pc.
    many thanks

    There are any number of resources on portrait touchup. Start by googling.

  • I cant hear anything on my itunes player.  how to i fix the volume?

    i cant hear anything on my itunes player. how do i fix the volume?

    Make sure the volume slider in iTunes isn't all the way to the left.
    If that doesn't work, check out this Apple article -> iTunes and QuickTime for Windows: Audio does not play or plays incorrectly

  • How to find out the number of songs in my iTunes 11 library

    How to find out the number of songs in my iTunes 11 library

    Welcome to the Apple Support Communities
    To see the number of songs, go to View menu > Show Status Bar, so the number of songs you have will appear at the bottom of the iTunes window

  • I Need to Even out the Sound Level from Tune to tune

    This is the problem I'm facing ....
    After recording a number of tunes ... and then burning them in iTunes ... I'll find that the ouput level changes from tune to tune.
    For example ... one tune's overall sound level is too low compared to the next one.
    When I'm mixing I of course try to have the master output as high as possible without clipping.
    I have been using Fission to normalize each tune individually ... but
    Is there a way to even out the levels from tune to tune. Of course i have "Sound Check" marked in iTunes preferences.
    Here is a strange but true story ...
    Someone took one of my disks with this problem .... went to a Sony store where they copied it ...
    and the sound levels are more even I swear. Is there some sort of software in cd copiers that can do this?
    Thanks ......

    Here are a couple of articles that give a useful overview of Mastering:
    Preparing Your Music For Mastering
    Mastering: How The Pros Do It
    Other than that, the Normalizing you're doing is the easiest way to even out the relative levels.
    WH

  • HT1386 My MacBook Pro HD crashed.  It is all up and runmning except for one issue.  I have about 200 songs on my iPhone but have only gotton 53 back on my laptop and those are the songs I purchased via iTunes. How do I get the rest of the songs from iPhon

    My MacBook Pro HD crashed.  It is all up and runmning except for one issue.  I have about 200 songs on my iPhone but have only gotton 53 back on my laptop from my iPhone and those are the songs I purchased via iTunes. How do I get the rest of the songs from my  iPhone back onto my HD. 
    The songs I'm not able to import casme from CD's.  Nothing from napster etc.
    I've tried and tried to import them rom iTunes vis "Library"  " Import"

    Hey kbert73
    I would do a transfer of purchases from the phone and not sync. If you sync then it will want to start over and sync music that is on the MacBook Pro. If you want to transfer the music, check out the article below that will give you multiple options on how to move. I have also provided on how to sync with multiple computers.
    iTunes: How to move your music to a new computer
    http://support.apple.com/kb/ht4527
    Using iPhone, iPad, or iPod with multiple computers
    http://support.apple.com/kb/ht1202
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • ITunes is indicating i have another iTunes library, how do I combine the 2 libraries into 1? Previous computer was a PC using iTunes.

    iTunes has indicated i have another iTunes library, how do i combine the 2 libraries into 1?
    My previous computer was a PC. I synced iTunes with my iPhone until the hard drive died, then I bought an iMac.
    Thanks for you help.

    I want to be able to transfer my apps from my original itunes account that I have on my personal iphone 3 and work ipad 3 to my work iphone 4S ,as well as purchase more more apps for the work iphone with the original itunes account.  Plus I need to sync all 3 of them with my work tower computer.  I really appreciate you're trying to help me out.

  • "The file 'iTunes Library.itl' cannot be read because it was created by a newer version of iTunes." Updates were only offered by Apple when I'd open iTunes. Now I can't open iTunes. How can I access the newest iTunes as an update, not a new program?

    "The file 'iTunes Library.itl' cannot be read because it was created by a newer version of iTunes." Updates were only offered by Apple when I'd open iTunes. Now I can't open iTunes. How can I access the newest iTunes as an update, not a new program?

    this just started w/ me yesterday.  I was running 10.5.3, and nothing changed - the message just appeard out of nowhere.  I update to the latest iTunes 10.6 but the message is the same.
    Sounds like probably some sort of Library file corruption.
    The two options available in the message box are "Download" and "Quit".  Download is useless because I'm already running the latest.  Quit is pretty useless.
    I was going to just create a new Library and re-import all my music.  Of course, all my iPhone sync settings are going go have to be recreated.

  • How to find out the locale setting in a browser?

    In my Java web project, the multi-lingual issue on the JSP pages is handled by JSTL. It works fine so far for any input messages. However, some messages come from the container. It is needed to find out the browser's country and language settings inside of the container. My question is how to find out the settings?
    Thanks in advance.
    v.

    Hi, this I found on James' website--see http://www.rf.net/~james/perli18n.html#Q28
    Q28. Can web servers automatically detect the language of the browser and display the correct localized page?
    A28. Yes. HTTP/1.1 defines the details of how content negotiation works, including language content.
    WWW browsers send an Accept-Language request header specifying which languages are preferred for responses. This technique works fairly well, although some versions of Netscape Navigator send an improperly formatted request parameter. Also, switching language preferences in either Navigator or IE 4 doesn't always "take" without first deleting a language hint.
    Few sites do content-negotiation on language, and interestingly enough I do not know of any major portals doing this. One site that does is Sun's documentation library at SunDocs. Debian.org does a very nice job of using Apache content negotiation wih languages and also has some nice help info too on Setting the Default Language.
    Apache's Content Negotiation features will select the right page to return, whether HTML or image file. Annoyingly, the match logic is very literal, so a browser request for en-us will not match a server entry of en except as a last resort. Any other exact match will win over en, even if en-us was first preference.
    There are 2 ways of doing content negotiation with Apache: type or variant maps and multiviews.
    Variant Maps
    In httpd.conf, disable Options Multiviews if configured and add
    AddType type-var var
    DirectoryIndex index.var
    Then create an index.var file like this:
    URI: start; vary="type,language"
    URI: index.html.en
    Content-type: text/html
    Content-language: en-GB
    URI: index.html.en
    Content-type: text/html
    Content-language: en-US
    URI: index.html.en
    Content-type: text/html
    Content-language: en
    URI: index.html.fr
    Content-type: text/html
    Content-language: fr-CA
    URI: index.html.fr
    Content-type: text/html
    Content-language: fr
    URI: index.html.es
    Content-type: text/html
    Content-language: es
    Multiviews
    The multiviews technique works like this. This does add extra server load, as each content directory must be scanned for the variant document names.
    index.html is localized into variant documents such as:
    index.html.en (or index.en.html)
    index.html.fr
    index.html.es
    index.html (or index.html.html as a reader has recommended) symlinked to one of the above as the last resort.
    Here's an example of http.conf directives for this:
    # in httpd.conf
    AddLanguage en .en
    AddLanguage fr .fr
    AddLanguage es .es
    # LanguagePriority allows you to give precedence to some languages
    # in case of a tie during content negotiation.
    # Just list the languages in decreasing order of preference.
    LanguagePriority en es fr de pt
    Options Multiviews
    # end of httpd.conf fragment
    Starting in Apache 1.2, you may also create documents with multiple language extensions.
    O'Reilly's Apache - The Definitive Guide, Chapter 6
    ApacheWeek article on Language Negotiation
    Another ApacheWeek article on Language Negotiation

  • How to find out the textframe contains "stroke color" (or) "fillcolor"?

    How to find out the textframe contains "stroke color" (or) "fillcolor" via javascript. Kindly advise me with sample.

    I know, this post is quite a while ago, but: This simply does not work for me. Neither for simple PathItems, nor for the characters of a TextFrame.
    Working on: Illustrator CS5.5, Mac OS, Javascript
    Simple example:
    var numSelectedObjects = app.activeDocument.selection.length;
    // If any objects selected: Get fill and stroke color of the first one
    if(numSelectedObjects > 0){
    alert("Fill Color: " + app.activeDocument.selection[0].fillColor + " / Stroke Color: " + app.activeDocument.selection[0].fillColor);
    This returns always CMYKColor, RGBColor or GrayColor, even if there is no Color assigned to the objects stroke or fill!!
    For PathItems there is the attribute ".filled" or ".stroked", which returns "true" or "false" and is reliable.
    if(app.activeDocument.selection[i].filled){ // works fine with PathItems!
    Is there anything similar for Characters? I tried this one, but it does not work (because I think it does not exist):
    if(app.activeDocument.selection[i].textRange.filled){ // does not work!
    I just need to find out, if the characters in a textfield have got a fill or stroke color. Reliable.
    It would be very nice to get help from anybody!
    Thanks a lot in advance!

  • How to find out the structure stored field  value in a standard program

    Hi Gurus,
    Please suggest me how to find out the structure field stores the value in which table.
    Exanple : i have a strutured field in T.code cj31 is BPDY-WERT1 and it is stotring value 10,000,000.00. know i need to find out in which table this value is storing .
    Please suggest me its urgent.
    Thanks in Adavance!!!
    Points will be rewarded.......
    Regards,
    Kranthi

    hi,
       Go to transaction ST05,Click activate trace with filter,Give the transactio name as cj31,Go to the transaction and navigate to the place where the particular field is present, then again go to st05 ,Deactivate the trace and display the trace.
    Now u can see how the data is fetched ,U can even go to display mode of the same transaction cj33
    Thanks
    San

  • How to find out the standard info stucture for a customized IS in LIS

    Hi All
    I have to run the statistical set up for the customized info structure S763 for the application plant maintenance in LIS. But i dont know whether it was copied from a standard SAP info structure or it was enhanced from a standard info structure.
    I have even checked out all the standard IS for plant maintenance but it is not matching. The closest match is S063 but a few characteristics and a key figure is missing.
    Could anybody guide me how to find out the standard info structure?
    Any help would be of great help.
    Regards
    Saddy

    Hi Ganesh
    No..it didnt solve my problem. MC23 only displays the info structures.  I have a customized info structure S763 which was created long time back. Im not sure whether it was copied from a standard info structure or enhanced from a standard info structure.
    I have to give the source info structure name to run statistical set up. The closest one which matches with the S763 is S063 but it is missing few characteristics and key figure.
    does it means that the IS S063 was enhanced?? Am i right?? If it was enhanced how will i run the statistical setup for the same...
    I hope i have explained clearly.
    Do provide ur valuable input.
    Regards
    Saddy

Maybe you are looking for