GB stops recording while inputting audio from cassette

Greetings,
I've been recording from a cassette deck through the line in on my G5. I recorded 14 cassettes with no problems. On the 15th, the GB recording suddenly stopped about five minutes in. I reset the tape and the timeline and tried it again. It stopped at about three minutes in. Several attempts more have made the recording time shorter and shorter.
Any ideas on what's going on?
thanks,
Robert

The solution seems to be in deleting all the previously recorded tracks in order to make room for the new ones. I had been recording tape after tape into GB with the idea of dropping them all to iTunes at once.
If you find yourself in this situation, try burning the files over then deleting old tracks. It worked for me.

Similar Messages

How to record video or use screen capture WHILE capturing audio from Logic??

Hi,
I want to record my self playing guitar and singing using my mac book pro built in camera. I want the audio to come from Logic so I can add whatever effects I want to the vocals. When I say audio from Logic I don't mean recording in Logic and adding it in post. I want it to be on the fly.
What I used to do was use the screen capturing program Snapz Pro. I would screen capture a box around photobooth for the video, and then record while having Logic's audio in the background. It screen captures my entire computers audio. So for example if I get an aim message the bleep would show up in the recording. Or if I raise the volume or lower it the little click sound fx would be in it as well.
Capturing the audio this way let me get Logic's audio effects in my video on the fly. It worked out great....until now! :/
I just got the audio interface "Duet 2". And am using a microphone instead of my mbp's built in one. When ever I tried to record and capture my systems audio - my entire computer would crash. Snapz Pro won't work with the system audio with the interface. It works fine without it though.
I then tried to use Quicktime's new movie recording feature. I see it only gives an option for microphone and now system audio. So I got soundflower to re route the audio but that doesn't help either. This is because when you capture this way you can't hear anything while your capturing. So if I were to record a video and wanted Logics audio in it, I would have to set the output to Soundflower first. So when I record I cant hear myself which defeats the purpose.
So my final question is, how can I record video while having Logic's audio? I don't need to record with the mic, because in Logic the mic audio is going thru the system audio with everything else.
I would like to use a process more similiar to Quicktimes straight movie recording instead of doing an odd way like I used to screen capturing a box around the photobooth screen.
Thanks

use Yawcam from Yawcam.com

Transferring audio from cassette to iTunes

How can I transfer audio from a cassette tape to my iTunes library? Thanks in advance! lin817
iBook G4 Mac OS X (10.3.5)

According to the Toast 7 features
Instantly capture and digitize audio with the desktop recorder Dashboard widget (requires Mac OS 10.4)
I added the bold. Since you are using OS 10.3 you would need to upgrade.

Inputting audio from Logic into iMovie video, involving syncing etc.

Hey guys, Im looking to make some song covers on youtube. But instead of just using audio from a camera, i want to input enhanced audio from using logic etc, and then syncing it with the video footage, using iMovie. An example of what i want to do: http://www.youtube.com/watch?v=u1SN1eN1_m4
please help me !

Hi,
I'm having this exact problem right now.
Did you ever figure it out?
Sorry I don't have a solution...
I'd appreciate any suggestions you may have discovered.
Leanne

Recorded Meeting plays audio from connect url but offline does not

Hello,
I recorded my meeting using audio from telephone conference (which is a nice new feature for 7.5 if not using one of the supported phone conferencing systems). When I play the recording from the adobe connect site URL (or choose edit) the audio plays. When I do a "make offline" it creates the presentation only with no audio. Is this a limitation that I did not read about or am I doing something wrong?
thank you

use this code "Component control = player.getVisualComponent(); "
instead of this code " Component control = player.getControlPanelComponent();"
But if you want show both of them, modify as following
Component control1 = player.getControlPanelComponent();
Component control2 = player.getVisualComponent();
then add the two control (control1 & control2 ) to your JFrame panel

How to skip first record while inserting data from a flat file to BW system

Hi Experts,
In my project we have to upload flat file into a BW system. I have written a program and it is working fine.
Now we have got another requirement. The flat file will have a header record (first row). While uploading the flat file we have to skip this record. How I can do so?
The code is as below:
FORM upload1.
DATA : wf_title    TYPE string,
          lt_filetab TYPE filetable,
          l_separator TYPE char01,
          l_action    TYPE i,
          l_count     TYPE i,
          ls_filetab TYPE file_table,
          wf_delemt TYPE rollname,
          wa_fieldcat TYPE lvc_s_fcat,
          tb_fieldcat TYPE lvc_t_fcat,
          rows_read TYPE i,
          p_error   TYPE char01,
          l_file      TYPE string.
DATA: wf_object(30) TYPE c,
          wf_tablnm TYPE rsdchkview.
wf_object = 'myprogram'.
DATA i TYPE i.
DATA:
       lr_mdmt                TYPE REF TO cl_rsdmd_mdmt,
       lr_mdmtr               TYPE REF TO cl_rsdmd_mdmtr,
       lt_idocstate           TYPE rsarr_t_idocstate,
       lv_subrc               TYPE sysubrc.
TYPES : BEGIN OF test_struc,
           /bic/myprogram TYPE /bic/oimyprogram,
           txtmd   TYPE rstxtmd,
           END OF test_struc.
DATA :    tb_assum TYPE TABLE OF /bic/pmyprogram.
DATA: wa_ztext TYPE /bic/tmyprogram,
        myprogram_temp TYPE ziott_assum,
        wa_myprogram TYPE /bic/pmyprogram.
DATA : test_upload TYPE STANDARD TABLE OF test_struc,
         wa2 TYPE test_struc.
DATA : wa_test_upload TYPE test_struc,
         ztable_data TYPE TABLE OF /bic/pmyprogram,
         ztable_text TYPE TABLE OF /bic/tmyprogram,
         wa_upld_text TYPE /bic/tmyprogram,
         wa_upld_data TYPE /bic/pmyprogram,
          t_assum TYPE ziott_assum.
DATA : wa1 LIKE test_upload.
wf_title = text-026.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
    EXPORTING
      window_title            = wf_title
      default_extension       = 'txt'
      file_filter             = 'Tab delimited Text Files (*.txt)'
    CHANGING
      file_table              = lt_filetab
      rc                      = l_count
      user_action             = l_action
    EXCEPTIONS
      file_open_dialog_failed = 1
      cntl_error              = 2
      OTHERS                  = 3.                          "#EC NOTEXT
IF sy-subrc <> 0.
    EXIT.
ENDIF.
LOOP AT lt_filetab INTO ls_filetab.
    l_file = ls_filetab.
ENDLOOP.
CHECK l_action = 0.
IF l_file IS INITIAL.
    EXIT.
ENDIF.
l_separator = 'X'.
wa_fieldcat-fieldname = 'test'.
wa_fieldcat-dd_roll = wf_delemt.
APPEND wa_fieldcat TO tb_fieldcat.
CALL FUNCTION 'MESSAGES_INITIALIZE'.
CLEAR wa_test_upload.
Upload file from front-end (PC)
File format is tab-delimited ASCII
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                = l_file
      has_field_separator     = l_separator
    TABLES
     data_tab                = i_mara
    data_tab                   = test_upload
    EXCEPTIONS
      file_open_error         = 1
      file_read_error         = 2
      no_batch                = 3
      gui_refuse_filetransfer = 4
      invalid_type            = 5
      no_authority            = 6
      unknown_error           = 7
      bad_data_format         = 8
      header_not_allowed      = 9
      separator_not_allowed   = 10
      header_too_long         = 11
      unknown_dp_error        = 12
      access_denied           = 13
      dp_out_of_memory        = 14
      disk_full               = 15
      dp_timeout              = 16
      OTHERS                  = 17.
IF sy-subrc <> 0.
    EXIT.
ELSE.
   CALL FUNCTION 'MESSAGES_INITIALIZE'.
    IF test_upload IS NOT INITIAL.
      DESCRIBE TABLE test_upload LINES rows_read.
      CLEAR : wa_test_upload,wa_upld_data.
      LOOP AT test_upload INTO wa_test_upload.
        CLEAR : p_error.
        rows_read = sy-tabix.
        IF wa_test_upload-/bic/myprogram IS INITIAL.
          p_error = 'X'.
          MESSAGE s153 WITH wa_test_upload-/bic/myprogram sy-tabix.
          CONTINUE.
        ELSE.
          TRANSLATE wa_test_upload-/bic/myprogram TO UPPER CASE.
          wa_upld_text-txtmd = wa_test_upload-txtmd.
          wa_upld_text-txtsh = wa_test_upload-txtmd.
          wa_upld_text-langu = sy-langu.
          wa_upld_data-chrt_accts = 'xyz1'.
          wa_upld_data-co_area = '12'.
          wa_upld_data-/bic/zxyzbcsg = 'Iy'.
          wa_upld_data-objvers = 'A'.
          wa_upld_data-changed = 'I'.
          wa_upld_data-/bic/zass_mdl = 'rrr'.
          wa_upld_data-/bic/zass_typ = 'I'.
          wa_upld_data-/bic/zdriver = 'yyy'.
          wa_upld_text-langu = sy-langu.
          MOVE-CORRESPONDING wa_test_upload TO wa_upld_data.
          MOVE-CORRESPONDING wa_test_upload TO wa_upld_text.
          APPEND wa_upld_data TO ztable_data.
          APPEND wa_upld_text TO ztable_text.
        ENDIF.
      ENDLOOP.
      DELETE ADJACENT DUPLICATES FROM ztable_data.
      DELETE ADJACENT DUPLICATES FROM ztable_text.
      IF ztable_data IS NOT INITIAL.
        CALL METHOD cl_rsdmd_mdmt=>factory
          EXPORTING
            i_chabasnm     = 'myprogram'
          IMPORTING
            e_r_mdmt       = lr_mdmt
          EXCEPTIONS
            invalid_iobjnm = 1
            OTHERS         = 2.
   CALL FUNCTION 'MESSAGES_INITIALIZE'.
   **Lock the Infoobject to update
        CALL FUNCTION 'RSDG_IOBJ_ENQUEUE'
          EXPORTING
            i_objnm      = wf_object
            i_scope      = '1'
            i_msgty      = rs_c_error
          EXCEPTIONS
            foreign_lock = 1
            sys_failure = 2.
        IF sy-subrc = 1.
          MESSAGE i107(zddd_rr) WITH wf_object sy-msgv2.
          EXIT.
        ELSEIF sy-subrc = 2.
          MESSAGE i108(zddd_rr) WITH wf_object.
          EXIT.
        ENDIF.
*****Update Master Table
        IF ztable_data IS NOT INITIAL.
          CALL FUNCTION 'RSDMD_WRITE_ATTRIBUTES_TEXTS'
                EXPORTING
                  i_iobjnm                     = 'myprogram'
                  i_tabclass                   = 'M'
       I_T_ATTR                     = lt_attr
                TABLES
                  i_t_table                    = ztable_data
                  EXCEPTIONS
                 attribute_name_error         = 1
                 iobj_not_found               = 2
                 generate_program_error       = 3
                 OTHERS                       = 4.
          IF sy-subrc <> 0.
            CALL FUNCTION 'MESSAGE_STORE'
              EXPORTING
                arbgb = 'zddd_rr'
                msgty = 'E'
                txtnr = '054'
                msgv1 = text-033
              EXCEPTIONS
                OTHERS = 3.
            MESSAGE e054(zddd_rr) WITH 'myprogram'.
          ELSE.
            CALL FUNCTION 'MESSAGE_STORE'
              EXPORTING
                arbgb = 'zddd_rr'
                msgty = 'S'
                txtnr = '053'
                msgv1 = text-033
              EXCEPTIONS
                OTHERS = 3.
          ENDIF.
*endif.
*****update Text Table
          IF ztable_text IS NOT INITIAL.
            CALL FUNCTION 'RSDMD_WRITE_ATTRIBUTES_TEXTS'
              EXPORTING
                i_iobjnm               = 'myprogram'
                i_tabclass             = 'T'
              TABLES
                i_t_table              = ztable_text
              EXCEPTIONS
                attribute_name_error   = 1
                iobj_not_found         = 2
                generate_program_error = 3
                OTHERS                 = 4.
            IF sy-subrc <> 0.
              CALL FUNCTION 'MESSAGE_STORE'
                EXPORTING
                  arbgb = 'zddd_rr'
                  msgty = 'E'
                  txtnr = '055'
                  msgv1 = text-033
                EXCEPTIONS
                  OTHERS = 3.
            ENDIF.
          ENDIF.
        ELSE.
          MESSAGE s178(zddd_rr).
        ENDIF.
      ENDIF.
      COMMIT WORK.
      CALL FUNCTION 'RSD_CHKTAB_GET_FOR_CHA_BAS'
        EXPORTING
          i_chabasnm = 'myprogram'
        IMPORTING
          e_chktab   = wf_tablnm
        EXCEPTIONS
          name_error = 1.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
****Release locks on Infoobject
      CALL FUNCTION 'RSDG_IOBJ_DEQUEUE'
        EXPORTING
          i_objnm = 'myprogram'
          i_scope = '1'.
    ENDIF.
ENDIF.
PERFORM data_selection .
PERFORM update_alv_grid_display.
CALL FUNCTION 'MESSAGES_SHOW'.
ENDFORM.
Please let me know how I can skip first record of the flat file?
Regards,
S

go through this hope u can get some idea
REPORT ztest no standard page heading line-size 255.
                      Declaration                            *
TYPES t_itab1 TYPE alsmex_tabline.
types: begin of t_csks,
       kostl like csks-kostl,
      end of t_csks.
types: begin of t_cska,
       kstar like cska-kstar,
      end of t_cska.
data: begin of t_flatfile,
      docdate like COHEADER-BLDAT,
      postdate like COHEADER-BUDAT,
      doctext like COHEADER-BLTXT,
       costele like RK23F-KSTAR,
       amount like RK23F-WTGBTR,
       scostctr like RK23F-SKOSTL,
       rcostctr like RK23F-EKOSTL,
       rintorder like RK23F-EAUFNR,
     end of t_flatfile.
data: begin of t_flatfile1,
      docdate like COHEADER-BLDAT,
      postdate like COHEADER-BUDAT,
      doctext like COHEADER-BLTXT,
       costele like RK23F-KSTAR,
       amount like RK23F-WTGBTR,
       scostctr like RK23F-SKOSTL,
       rcostctr like RK23F-EKOSTL,
       rintorder like RK23F-EAUFNR,
       NUM LIKE SY-INDEX,
     end of t_flatfile1.
data: itab like table of t_flatfile with header line.
data: itab2 like table of t_flatfile1 with header line.
DATA: it_itab1 TYPE STANDARD TABLE OF t_itab1 WITH HEADER LINE,
      MESSTAB1 LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE,
      MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
data: begin of bdcdata occurs 0.
        include structure bdcdata.
data: end of bdcdata.
data:t_lin type i VALUE '0',
     u_rec type i VALUE '0',
     s_rec type i VALUE '0'.
data: it_csks type standard table of t_csks,
      wa_csks type t_csks.
data: it_cska type standard table of t_cska,
      wa_cska type t_cska.
*Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-010.
parameters: p_docdat LIKE COHEADER-BLDAT obligatory,
            p_postda LIKE COHEADER-BUDAT obligatory,
            p_doctxt LIKE COHEADER-BLTXT.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-011.
parameters: p_file LIKE RLGRAP-FILENAME obligatory,
            DIS_MODE LIKE CTU_PARAMS-DISMODE DEFAULT 'N'.
SELECTION-SCREEN END OF BLOCK b2.
              A T S E L E C T I O N   S C R E E N                  *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
PERFORM get_local_file_name USING p_file.
*Start of Selection
START-OF-SELECTION.
Perform get_Excel_data.
perform validate_data.
Perform Process_Data.
                end-of-selection
end-of-selection.
perform display_data.
*&      Form get_local_file_name
      text
     -->P_P_FILE text
FORM get_local_file_name USING    P_P_FILE.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
    CHANGING
      file_name = p_file.
ENDFORM.                    " get_local_file_name
*&      Form get_Excel_data
      text
--> p1        text
<-- p2        text
FORM get_Excel_data .
FIELD-SYMBOLS : <FS>.
DATA : V_INDEX TYPE I.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
    EXPORTING
      filename                = p_file
      i_begin_col             = 1
    i_begin_row             = 2
      i_begin_row             = 1
      i_end_col               = 256
      i_end_row               = 9999                        "65536
    TABLES
      intern                  = it_itab1
    EXCEPTIONS
      inconsistent_parameters = 1
      upload_ole              = 2
      OTHERS                  = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    Message text-013 type 'E'.
ENDIF.
IF IT_ITAB1[] IS INITIAL.
    Message text-001 type 'E'.
else.                                    "IF IT_ITAB1[] IS INITIAL.
    data: itab2 like itab occurs 0 with header line.
    SORT IT_ITAB1 BY ROW COL.
    LOOP AT IT_ITAB1.
      MOVE :IT_ITAB1-COL TO V_INDEX.
      ASSIGN COMPONENT V_INDEX OF STRUCTURE itab2 TO <FS>.
      MOVE : IT_ITAB1-VALUE TO <FS>.
      AT END OF ROW.
        MOVE-CORRESPONDING itab2 TO itab.
        APPEND itab.
        CLEAR:itab,itab2.
      ENDAT.
    endloop.
    describe table itab lines t_lin.
endif.               "IF IT_ITAB1[] IS INITIAL.
ENDFORM.                    " get_Excel_data
*&      Form Process_Data
      text
--> p1        text
<-- p2        text
FORM Process_Data .
data:l_tabix type sy-tabix.
data:l_periv like t001-periv,
       l_monat like bkpf-monat,
       l_gjahr like bkpf-gjahr,
       l_amt(21) type c.
data: l_ddate(10),
        l_pdate(10).
WRITE p_docdat TO l_ddate.
WRITE p_postda TO l_pdate.
clear: l_periv,l_monat,l_gjahr.
select single periv from t001 into l_periv where bukrs = '5000'. "P_bukrs
if sy-subrc eq 0.
    l_gjahr = p_postda+0(4).
    call function 'FI_PERIOD_DETERMINE'
      EXPORTING
        i_budat = p_postda
        i_bukrs = '5000'     "p_bukrs
        i_periv = l_periv
        i_gjahr = l_gjahr
      IMPORTING
        e_monat = l_monat.
    clear:l_periv.
endif.
loop at itab2.
    refresh:bdcdata.
    clear:bdcdata.
    l_tabix = sy-tabix.
    perform bdc_dynpro      using 'SAPLK23F1' '1200'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'COHEADER-SEND_REC_REL'
                                  '10SAP'.
    perform bdc_field       using 'RK23F-STATUS'
                                  'S'.
    perform bdc_field       using 'COHEADER-BLDAT'
                             itab-docdate.
                                  l_ddate.
    perform bdc_field       using 'COHEADER-BUDAT'
                             itab-postdate.
                                  l_pdate.
    perform bdc_field       using 'COHEADER-PERIO'
                                   l_monat.                 "'9'.
    perform bdc_field       using 'COHEADER-BLTXT'
                             itab-doctext.
                                  p_doctxt.
    perform bdc_field       using 'RK23F-KSTAR'
                                  itab2-costele.
    WRITE itab2-amount TO l_amt.
l_amt = itab-amount.
    condense l_amt no-gaps.
    perform bdc_field       using 'RK23F-WTGBTR'
                                   l_amt.
                             itab-amount.
    perform bdc_field       using 'RK23F-WAERS'
                                  'USD'.
*perform bdc_field       using 'RK23F-SGTXT'
                             itab-doctext.
    perform bdc_field       using 'RK23F-SKOSTL'
                                  itab2-scostctr.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RK23F-EAUFNR'.
    perform bdc_field       using 'RK23F-EKOSTL'
                                  itab2-rcostctr.
    perform bdc_field       using 'RK23F-EAUFNR'
                                  itab2-rintorder.
    perform bdc_dynpro      using 'SAPLK23F1' '1200'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=POST'.
    perform bdc_field       using 'COHEADER-SEND_REC_REL'
                                  '10SAP'.
    perform bdc_field       using 'RK23F-STATUS'
                                  'S'.
    perform bdc_field       using 'COHEADER-BLDAT'
                             itab-docdate.
                                  l_ddate.
    perform bdc_field       using 'COHEADER-BUDAT'
                              itab-postdate.
                                  l_pdate.
    perform bdc_field       using 'COHEADER-PERIO'
                             '9'.
                                    l_monat.
    perform bdc_field       using 'COHEADER-BLTXT'
                              itab-doctext.
                                  p_doctxt.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RK23F-KSTAR'.
    perform bdc_field       using 'RK23F-WAERS'
                                  'USD'.
    CALL TRANSACTION 'KB15N' USING BDCDATA MODE DIS_MODE MESSAGES INTO MESSTAB.
    If sy-subrc = 0.
      s_rec = s_rec + 1.
    ELSE.
      u_rec = u_rec + 1.
      move ITAB2-NUM to messtab1-msgv1.
      concatenate itab2-costele ' | ' itab2-scostctr ' | ' itab2-rcostctr ' | ' itab2-rintorder into messtab1-msgv2.
      condense messtab1-msgv2.
      condense messtab1-msgv1.
      append messtab1.
    endif.
    clear:itab2.
endloop.
ENDFORM.                    " Process_Data
      BDC_DYNPRO                                                     *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO   = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM.                    "BDC_DYNPRO
       BDC_FIELD                                                     *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> ''. "NODATA.
    CLEAR BDCDATA.
    BDCDATA-FNAM = FNAM.
    BDCDATA-FVAL = FVAL.
    APPEND BDCDATA.
ENDIF.
ENDFORM.                    "BDC_FIELD
*&      Form display_data
      text
--> p1        text
<-- p2        text
FORM display_data .
skip 2.
write:/15 text-002.
skip 2.
write:/8 text-003.
SKIP.
write:/12 text-008,
         25 P_DOCDAT.
SKIP.
write:/12 text-009,
         25 P_POSTDA.
SKIP.
write:/12 text-012,
          25 P_DOCTXT.
SKIP.
write:/12 text-004,
         25 p_file.
skip 2.
write:/8 text-005,
        60 t_lin.
skip.
write:/8 text-006,
        60 s_rec.
skip.
write:/8 text-007,
        60 u_rec.
skip.
write:/10 'row no',
         20 'Information'.
skip.
loop at messtab1.
    write:/10 messtab1-msgv1,
           20 messtab1-msgv2.
    clear:messtab1.
endloop.
ENDFORM.                    " display_data
*&      Form validate_data
      text
--> p1        text
<-- p2        text
FORM validate_data .
data: l_tabix1 type sy-tabix.
data: l_tabix2 type sy-tabix.
if not itab[] is initial.
    select kostl from CSKS into table it_csks.
    if sy-subrc eq 0.
      sort it_csks by kostl.
    endif.
    select kstar from CSKA into table it_cska.
    if sy-subrc eq 0.
      sort it_cska by kstar.
    endif.
    loop at itab.
      l_tabix1 = sy-tabix.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
    INPUT         = itab-scostctr
IMPORTING
   OUTPUT        = itab-scostctr .
      read table it_csks into wa_csks with key kostl = itab-scostctr.
      if sy-subrc ne 0.
        u_rec = u_rec + 1.
       L_TABIX2 = l_tabix1 + 1.
       move l_tabix2 to messtab1-msgv1.
        move l_tabix1 to messtab1-msgv1.
        move itab-rintorder to messtab1-msgv2.
        concatenate itab-costele ' | ' itab-scostctr ' | ' itab-rcostctr ' | ' itab-rintorder into messtab1-msgv2.
        condense messtab1-msgv2.
        condense messtab1-msgv1.
        append messtab1.
        clear:wa_csks.
       CLEAR:L_TABIX2.
        continue.
      endif.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
    INPUT         = itab-rcostctr
IMPORTING
   OUTPUT        = itab-rcostctr .
      read table it_csks into wa_csks with key kostl = itab-rcostctr.
      if sy-subrc ne 0.
        u_rec = u_rec + 1.
       L_TABIX2 = l_tabix1 + 1.
       move l_tabix2 to messtab1-msgv1.
        move l_tabix1 to messtab1-msgv1.
          concatenate itab-costele ' | ' itab-scostctr ' | ' itab-rcostctr ' | ' itab-rintorder into messtab1-msgv2.
        condense messtab1-msgv2.
        condense messtab1-msgv1.
        append messtab1.
        clear:wa_csks.
       CLEAR:L_TABIX2.
        continue.
      endif.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
    INPUT         = itab-costele
IMPORTING
   OUTPUT        = itab-costele .
      read table it_cska into wa_cska with key kstar = itab-costele.
      if sy-subrc ne 0.
        u_rec = u_rec + 1.
       L_TABIX2 = l_tabix1 + 1.
       move l_tabix2 to messtab1-msgv1.
        move l_tabix1 to messtab1-msgv1.
        concatenate itab-costele ' | ' itab-scostctr ' | ' itab-rcostctr ' | ' itab-rintorder into messtab1-msgv2.
        condense messtab1-msgv2.
        condense messtab1-msgv1.
        append messtab1.
        clear:wa_csks.
       CLEAR:L_TABIX2.
        continue.
      endif.
move-corresponding itab to itab2.
MOVE l_tabix1 TO ITAB2-NUM.
append itab2.
clear: itab2.
      clear:itab.
    endloop.
else.
    message 'No records in File' type 'S'.
endif.
ENDFORM.                    " validate_data

Missing records while fetching data from Data mart

Hi,
I have some missing records in the ODS.The data is fetched from the other BW system.
It is a delta load & all the loads are succesfull as of now.But still some records are missing.
If i see in reconstruction tab, some requests are showing the Transfer structure status as clock(transfer stucture has changed sine the last request). Is it because of this time stamp status got changed ?
I have done reinitialization & the missing Datas are fetched .But i would like to know the cause of missing records.
Regrads,
ANita

Hi kedar,
If there was a time stamp difference ,the data load should have got failed.All the delta loads were succesfull.
But now they realised there are some missing records.Just for analysis purpose , i was looking into reconstruction tab & the transfer structure status was displayed as clock.
But actually there was no change in the transfer stucture.
Sometimes we used to get timestamp error &
we used to replicate the data source & activate the transfer structure.
To avoid these things in future what needs to be done.As this load gets triggered through process chain & each time the data load status was succesful.
Every time we cant do replication of datasource while loading through Process chain unless the transfer structure gets changed.
But my concern was is this the cause for missing records or something else.
Regards,
ANita

"stopped" status while creating pdf from AI

Hi, my friend taught me a way (to "print" pdf) to create PDF from illustrator that could make the file size much smaller, but now my question is, it works in my macbook (ppd version 1.1) but not my desktop imac (ppd version 1.0), the printer status always jump to stopped during the process of creating the PDF, anyone got any idea why? is it because of ppd version different? where can i donwload the latest ppd version. Many Thanks.

What is the LiveCycle version?
Is it possible for you to share an example(somewhere on public file sharing sites)?

Less number of Records while loading data from one cube to another

Hi,
We are in the process of doing major changes in the existing InfoCube.
Before making any changes, we had planned to make a copy of the cube with data.
For this we did the following steps :
1. Created the new cube from the original cube.
2. Generated Datasource on the Orignal cube.
3. Made a update rule on the new cube by selecting the Orinal cube.
4. Made a InfoPack on Infosouce which got created with 8<original cube>.
5. Uploaded the data into the new cube.
We have uploaded the data successfully from the original cube to the new cube.
However, New cube shows less number of records as compared to the original cube.
But the query is showing the same figures from both the cubes.
Can anyone please advise what could be the reason for this less number of records and how the figures are showing same when we run the query from both the cubes.
Please help.
Thanks
Ramesh Ganji

Hi Ramesh,
this is possible coz when u have loaded yr original cube, it may be loaded on daily/weekly basis. so in the cube there are many requests. Also if in the same request, if there are two records with same dimension keys ther are automatically added aggregating them.
if req 1 has following records
cust mat amt
1      1     100
1      1       50
it will add
1      1     150
and if the records are seperated by different req, then both will b added individually.
therefore when u r loading yr new cube from original cube, all records that has same dimension key gets aggregated coz they are loaded into single request. so it showing less no of records as added.
hope this helps.
Regards,
Purvang
Assigning Point is to say Thanks in SDN *

IPhoto stopped working while importing photos from iPhone

I am new to Mac OX and I just tried to load all my pictures in the iPhone to the Macbook Air by iPhoto.
There were some 4000 pictures in my iPhone. During the import and while the blue bar go half way, the picture stopped skipping and the import seemed to stop itself.
I clicked "Stop Import" and then clicked "Keep Photos" in the prompt. However, nothing happened. The iPhoto just don't let me quit and prompted "Photos are being imported to the photo library. Please wait for import to complete".
what should I do? I just want to back up my photos.

apple menu ==> force quit - restart your Mac and the phone and try again
LN

Getting zero records while extracting data from R/3

Hi friends,
I have a cube to which data was getting loaded earlier in qulaity system. But i came acorss some issues with the loads. The issues were that everytime a load was run it was extracted with Init with some selection, i was wondering why did they do Init instead of repair full . After doing some investigation i came to know that this data source is not supporting Init without data transfer, so i think thats why they have done Init.
I have deleted the requests from the cube until the point where there were incorrect loads and started to do Init again from 10.01.2010 to 31.12.9999. When i run the RSA3 i can see about 65,000 records but when i run the Init or full Load i am getting zero records. Not able to load the data can anyone please tell me where am i going wrong?
I am using data source 0UC_SALES_STATS_02 (IS-U datasource).
Thanks in advance.
Regards
BN

Hi prashant,
Thanks a lot for your quick reply. But there is no Init flag available, becuase it was already deleted.
If it was existing then the system would popup a message saying that there is a init already existing and proposing me to delete it ,and it will not allow me to run the Load without deleteing the flag.
So, the issue is not with the Init flag.
Regards
BN

Recording audio from Flash video

I'm not sure if this is in the correct section, but . . .
I would like to know how to record only the audio from Flash video. Specifically, there's a website my daughter loves which has Flash movies showing little animations with children's songs. I'd like to be able to get just the audio from those songs onto my MacBook so we don't have to go online to listen to them every time.
Thanks.

Audio HiJack http://www.rogueamoeba.com/audiohijackpro/

How do I record audio from movies on an iMac?

Hi, I would like to record pieces of audio from dvd movies in mp3 format on my mac, how can i do it?
I've tried with quicktime but the quality is bad, probably because quicktime also records enviromental sounds and noises. Any suggestions?

ciao,
use this simply tutorial
http://www.simplehelp.net/2006/09/09/how-to-extract-and-convert-the-audio-from-a -dvd-using-os-x/

How do you record video with usb mic and have the audio from garageband be the sound when recording and not just your normal voice but garage band effects for youtube?

How do you record video with usb mic and have the audio form garageband be apart of the video when recording, meaning the audio from garageband and echo and not just your normal voice for youtube post?its not add the garageband audio its just normal voice from mic no effects is going thru?

Hi Life93,
What you describe would be possible by recording your video, then removing the audio from it and adding audio from GarageBand once the video is in iMovie (I presume here that you are using iMovie for your video production. Other applications may need different methods.)
See this thread on how to remove the audio from a clip in iMovie -
Is there a way to separate audio from a video c...
https://discussions.apple.com/thread/1779767
To add audio from GarageBand use this article -
iMovie '11: Add a sound clip to your project
http://support.apple.com/kb/PH2255
Thanks for using Apple Support Communities.
Best,
Brett L

Autodrop stops recording ramdomly

This is driving me absolutely nuts. Is this a bug or am I not doing something correctly.
recording audio, trying to punch in but Logic is not behaving. If I don't douch anything with cycle or autodrop it will randomly stop recording in different places from one take to the next.
tried rebooting logic, repairing permissions several times. Can anyone offer some advise?
Thank you
Powerbook G4 1.5gh Mac OS X (10.4.8) LP7.2, 01X, i88x, ES7

Enough of us do this on a regular basis, I guess, that it's probably not Logic. I have to say it sounds more like some kind of driver problem. I hate the usual recommendations "update your software" but I can't help feeling it's something in the driver/preferences/hardware route.
Sorry but I haven't seen any such problem and I look after 45 machines of various types.
Pete

GB stops recording while inputting audio from cassette

Similar Messages

Maybe you are looking for