GB won't accept transposed MIDI signal from digital piano

For some reason I can’t get GB to accept transposed MIDI signals from my Previa PX-120 digital piano. The connections are correct, from the piano to my MacBook through an Edirol UA-25 interface, and the signal is getting through fine. If I want to record with the piano in default C, there’s no problem. But if I transpose at the piano, GB continues to play it through the monitor in C (the master track is set up to the correct transposed key). The signal coming from the piano is fine, as I’ve tested from the interface to speakers, and the same thing happens when I feed the signal through a Kurtzweil MicroPiano and do the transposition there - GB goes on reproducing it as default C.
The odd thing is that I had no problem with the same set-up with a Yamaha piano. This is probably irrelevant, but it’s strange.
Any help very gratefully received as this is screwing up recordings with piano, voice and guitar, when the piano player needs to transpose in some keys.

I’ve been asking myself the same question. The Privia manual is silent on the point and I can’t get a reply from their Support, though will try again. Unfortunately I’m no MIDI or sound technician, so know nothing about how transposed MIDI signals should work, but, having run tests again, the piano certainly seems to be sending an untransposed signal via MIDI. At least, when I connect the piano via MIDI to the MicroPiano the signal sent does not transpose (I was wrong in my first post about this), though I can then transpose it with the MicroPiano. This would be fine if all I wanted to do was then send it direct to speakers. But if I send the signal on to the Mac from the MicroPiano via MIDI, it doesn’t transpose either, and I’m back where I started.
In other words, neither the Privia nor the MicroPiano is outputting transposed MIDI signal, only default C signal, and this is the problem rather than GB. Does this make sense?
I’d be very interested to learn what you come up with re your Yamaha. I’ll get a colleague to try the same thing. And will also try Privia support again. But, meanwhile, if anyone else has any experience or knowledge, I’d really appreciate hearing.

Similar Messages

  • Won't accept password when waking from sleep.

    a client of mine is having an issue where her mac won't accept her password after waking from sleep.  The same password works when she restarts.  She has confirmed that caps lock is off.  Any Ideas?
    I left her a message trying to find out more details about her computer like OS version and stuff.  Will update this when i hear from her.

    She still hasn't returned my call, but i know that she is able to type.  Whether its wifi keyboard or not I do not know.

  • Help! FCE won't accept anything I export from MPEG Streamclip 1.9

    I've searched the forums, and I've done it before, and this should be the answer:
    Exporting from MPEG Streamclip to QT using the DV/DVCPRO-NTSC codec should work to make a movie FCE will import in the DV-NTSC Easy Setup without the need to render!
    It doesn't work anymore. I swear. I've tried every Easy Setup, tons of combinations of MPEG Streamclip exports (all QT) and Easy Setup for the past 2 hours. No matter what export I try, FCE won't accept it without the need to render.
    What am I missing? This has always been so easy. Please please help. Thank you.

    case in point: http://discussions.apple.com/thread.jspa?messageID=6244157
    this is EXACTLY what i have always done and am now doing and it no longer works. is there anything anyone can think of?

  • Lacie 2Big Network Drive won't Accept a DHCP address from Time Capsule

    Good evening all.
    I have 2 of these Lacie 2Big network drives. One accepts a DHCP address from my Time capsule and the other does not, giving itself a self assigned IP address instead. It does accept a manually assigned address though. The settings on both the Lacie drives are identical as far as I can tell and they both run the latest 2.0.6 software. I tried hard reset on the Time capsule, and swapping the ethernet cables over on the two Lacie drives but to no avail. The log on the drive that won't accept a DHCP address says it is timing out after 45 seconds and setting a self assigned address. The drive that won't accept DHCP is an older drive with software updated to 2.0.6, but it had the problem with the older software as well. Does anyone have a similar experience and / or solution ?
    regards
    Shaun

    Also tried resetting PRAM, no luck.
    What does work is if I use Manual DHCP mode and specify the router's address (192.168.0.1). Then everything works but not on Automatic, which worked for a long time.
    Ed

  • Is it possible to use "Delay Values" to create a frequency signal from digital "Count Edges" -task? (= are the results I'm getting correct?)

    Hello.
    I have a digital encoder from which I need freaquency information (to ultimately get rpm -infromation). The problem is that this task is inside a loop with 2 other DAQmx -tasks that are using "one sample on demand"-aquisition mode and if I configure this new counter task to be a freaquency task, it only updates once in ~ second which makes the whole loop lag.
    I thus created an "artificial" freaquency signal by using "Count Edges" -aquicition mode and the "Delay Values" -block so that I substract the delayed signal from original "Count Edges" -signal. There is a 0,01s delay in the loop and I figured out that if the history of the "Delay Values" -block is 100 samples I would thus get the real edge-freaquency.
    I tested this configuration and the results seem to be at least really close to correct but I have no idea if this idea is in any way correct...
    This explanation was probably quite confusing so please see the picture attached.
    Thanks a lot in advance! 
    Attachments:
    are_the_results_correct.jpg ‏200 KB

    First of all, thank you for quick reply. Unfortunately I don't have the acces to the vi. until tomorrow.
    And yes, I think you understood correctly: essentially this arragement measures how many edges have been counted during one iteration. This is how I figured out that this could then be used as a frequency measurement:
    1. From the "Edges - Delayed Edges" I get the information on how many edges have been counted during last iteration.
    2. I "know" (really I don't?) that one iteration lasts ~0,01s because of the delay in the loop.
    3. There is 2048 edges in one round of the encoder so I get the rpm as follows: rpm = (edges - delayed edges)/204,8*60(s)
    (If I was using history size of one as you suggested it would be: rpm = (edges-delayed edges)/2048 * 60) However using history size of 10 and taking it account in the multiplication smoothens the response nicely.
    But doesn't this arragement count on the fact that the vi runs smoothly and there is no additional lag?
    I quess using another loop and notifiers for a dedicated freaquency measurement as you suggested could be worth trying. I just have to first learn how to use them. 
    If I do use them will the main loop run smoothly and not wait for every update of the notifier? This would be essential since the freaquency output refresses only about once in a second if I use the continious aquisition mode.
    Attachments:
    are_the_results_correct.jpg ‏198 KB

  • Midi Out to Digital Piano

    Casio Celviano AP-450 Digital Piano connected over USB Midi cable to computer.
    I can receive midi message from piano to computer.
    I can record it to computer with Garage Band.
    But I can't playback to piano.
    I could not find the way to do it.
    I found a plugin named miniO but it did not work in OS X Maverick.
    Actualy, I dont know that do I need a third party software.
    is there anyone allready make this?
    well, playing one or more tracks back to Digital Piano.

    You cannot send midi from GarageBand to your keyboard, if that is what you are asking.

  • Mac Lion won't accept IP address sent from DHCP server

    Upgraded to Lion a few days ago.  Everything worked for a couple days.  Plug in the ethernet cable today and I never get an ip address with DHCP from my router.  I have 2 other devices plugged into the router and they get ip addresses normally.  Captured the DHCP communication to see if I was getting a valid DHCP offer and I am...it is included.  The Lion firewall is disabled.  For some reason Lion isn't accepting the DHCP offer.  Could this be a bug or maybe something in a cache needs to cleaned out.  I connect to several different networks daily and they all work except for this one.
    The line in Bold type shows the ip address being offered that never gets accepted by lion.
    No.     Time        Source                Destination           Protocol Info
         26 21.993141   10.19.39.97           255.255.255.255       DHCP     DHCP Offer    - Transaction ID 0x4e299603
    Frame 26 (353 bytes on wire, 353 bytes captured)
        Arrival Time: Aug  5, 2011 19:30:01.105566000
        [Time delta from previous captured frame: 0.001086000 seconds]
        [Time delta from previous displayed frame: 0.001086000 seconds]
        [Time since reference or first frame: 21.993141000 seconds]
        Frame Number: 26
        Frame Length: 353 bytes
        Capture Length: 353 bytes
        [Frame is marked: False]
        [Protocols in frame: eth:ip:udp:bootp]
        [Coloring Rule Name: UDP]
        [Coloring Rule String: udp]
    Ethernet II, Src: e8:b7:48:e6:ab:5c (e8:b7:48:e6:ab:5c), Dst: Broadcast (ff:ff:ff:ff:ff:ff)
        Destination: Broadcast (ff:ff:ff:ff:ff:ff)
            Address: Broadcast (ff:ff:ff:ff:ff:ff)
            .... ...1 .... .... .... .... = IG bit: Group address (multicast/broadcast)
            .... ..1. .... .... .... .... = LG bit: Locally administered address (this is NOT the factory default)
        Source: e8:b7:48:e6:ab:5c (e8:b7:48:e6:ab:5c)
            Address: e8:b7:48:e6:ab:5c (e8:b7:48:e6:ab:5c)
            .... ...0 .... .... .... .... = IG bit: Individual address (unicast)
            .... ..0. .... .... .... .... = LG bit: Globally unique address (factory default)
        Type: IP (0x0800)
    Internet Protocol, Src: 10.19.39.97 (10.19.39.97), Dst: 255.255.255.255 (255.255.255.255)
        Version: 4
        Header length: 20 bytes
        Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
            0000 00.. = Differentiated Services Codepoint: Default (0x00)
            .... ..0. = ECN-Capable Transport (ECT): 0
            .... ...0 = ECN-CE: 0
        Total Length: 339
        Identification: 0x00fa (250)
        Flags: 0x00
            0.. = Reserved bit: Not Set
            .0. = Don't fragment: Not Set
            ..0 = More fragments: Not Set
        Fragment offset: 0
        Time to live: 255
        Protocol: UDP (0x11)
        Header checksum: 0x882c [correct]
            [Good: True]
            [Bad : False]
        Source: 10.19.39.97 (10.19.39.97)
        Destination: 255.255.255.255 (255.255.255.255)
    User Datagram Protocol, Src Port: bootps (67), Dst Port: bootpc (68)
        Source port: bootps (67)
        Destination port: bootpc (68)
        Length: 319
        Checksum: 0x038d [validation disabled]
            [Good Checksum: False]
            [Bad Checksum: False]
    Bootstrap Protocol
        Message type: Boot Reply (2)
        Hardware type: Ethernet
        Hardware address length: 6
        Hops: 0
        Transaction ID: 0x4e299603
        Seconds elapsed: 0
        Bootp flags: 0x8000 (Broadcast)
            1... .... .... .... = Broadcast flag: Broadcast
            .000 0000 0000 0000 = Reserved flags: 0x0000
        Client IP address: 0.0.0.0 (0.0.0.0)
        Your (client) IP address: 10.19.39.98 (10.19.39.98)
        Next server IP address: 0.0.0.0 (0.0.0.0)
        Relay agent IP address: 0.0.0.0 (0.0.0.0)
        Client MAC address: Apple_17:fd:5d (c4:2c:03:17:fd:5d)
        Client hardware address padding: 00000000000000000000
        Server host name not given
        Boot file name not given
        Magic cookie: (OK)
        Option: (t=53,l=1) DHCP Message Type = DHCP Offer
            Option: (53) DHCP Message Type
            Length: 1
            Value: 02
        Option: (t=54,l=4) DHCP Server Identifier = 10.19.39.97
            Option: (54) DHCP Server Identifier
            Length: 4
            Value: 0A132761
        Option: (t=51,l=4) IP Address Lease Time = 1 day, 23 hours, 39 minutes, 50 seconds
            Option: (51) IP Address Lease Time
            Length: 4
            Value: 00029E46
        Option: (t=58,l=4) Renewal Time Value = 23 hours, 49 minutes, 55 seconds
            Option: (58) Renewal Time Value
            Length: 4
            Value: 00014F23
        Option: (t=59,l=4) Rebinding Time Value = 1 day, 17 hours, 42 minutes, 16 seconds
            Option: (59) Rebinding Time Value
            Length: 4
            Value: 00024A78
        Option: (t=1,l=4) Subnet Mask = 255.255.255.240
            Option: (1) Subnet Mask
            Length: 4
            Value: FFFFFFF0
        Option: (t=6,l=8) Domain Name Server
            Option: (6) Domain Name Server
            Length: 8
            Value: AB44E278AB46A8B7
            IP Address: 171.68.226.120
            IP Address: 171.70.168.183
        Option: (t=44,l=8) NetBIOS over TCP/IP Name Server
            Option: (44) NetBIOS over TCP/IP Name Server
            Length: 8
            Value: AB443935AD2573BF
            IP Address: 171.68.57.53
            IP Address: 173.37.115.191
        Option: (t=3,l=4) Router = 10.19.39.97
            Option: (3) Router
            Length: 4
            Value: 0A132761
        End Option

    I have seen the same issue with my iOS and Mac OS devices (iPhone and MacBook Pro). I have written my own DHCP server (http://notebook.kulchenko.com/embedded/dhcp-and-dns-servers-with-arduino) and have had troubles getting my devices to connect (Windows Vista and Ubuntu devices connect fine). I suspect that this problem happens because the DHCP Offer message is sent to a broadcast address, even though (at least in my case) the broadcast flag is off in the DHCP Discover message I see.
    Unfortunately you didn't include the Discover message, so I can't tell for sure, but if it indeed has the broadcast flag set to 0, then the server should send the response message using unicast as per DHCP spec (http://www.ietf.org/rfc/rfc2131.txt, section 4.1):
      If the broadcast bit is not set and 'giaddr' is zero and
       'ciaddr' is zero, then the server unicasts DHCPOFFER and DHCPACK
       messages to the client's hardware address and 'yiaddr' address.
    So, it seems like in this case the server may be at fault, even though it would be nice for Mac OS to accept broadcast responses (and would solve my problem too).
    Can someone confirm that Mac OS does not accept broadcast responses to DHCP Discover and DHCP Request messages? Thanks.
    Paul.

  • Premiere Pro v6.0.3 won't accept drag & dropped files from Sony's XDCAM Browser v2.1

    Premiere Pro reports a "generic file import" error when I try to drag & drop my video files (.mxf) from Sony's XDCAM browser directly into Premiere Pro project window.  However, I can drag & drop the same file(s) directly from a file folder on my computer and I can also use the "file import" from Premiere Pro drop down menu to import the same files with no problems.
    Also, I can successfully drag & drop video files (.m2ts) from Sony's Content Management Utility into Premiere.
    But why can't I drag and drop the same files (.mxf) directly from my Sony XDCAM Browser.   It appears to me that my issue is related specifically to XDCAM Browser & the .mxf files it supports (note:  Sony's Content Management Utility does support .mxf files so I can't simply use that Utility).
    Windows 7, 64bit
    CS6
    Sony XDCAM Browser v2.1
    Sincerely,
    Joe

    I try to drag & drop my video files (.mxf) from Sony's XDCAM browser directly into Premiere Pro project window.
    You need to use the Media Browser within Premiere
    to import these files.
    Copy the entire contents of the media card to an internal drive first.

  • Creative Cloud registration page won't accept the serial number from my email

    I have previously purchased Adobe Lightroom 5 from the Adobe download site and use it on my Mac Mini.  I have recently joined the Creative Community to access Lightroom Mobile, which may not the the panacea I was hoping for.  So I re-downloaded Lightroom 5 from the Creative Cloud app to link it to my Creative Cloud account.  When trying to register the new one, it asks for my ORIGINAL serial number from my Adoble email.  When I enter this, it says it is invalid.  Its the only serial number I've received.  How do I get to enter and register the new product?
    Regards,
    Colin Begg

    Serial number and activation chat support (non-CC) may help
    http://helpx.adobe.com/x-productkb/global/service1.html

  • Bought Aperture 3 Upgrade. Won't accept my Serial Number from Aperture 2...

    I have Aperture 2 and my Aperture 3 Upgrade will not accept the serial number no matter how many times I try it. Please help. Why the he11 doesn't Apple have easy contact numbers for situations like this?
    Thanks.

    I assume you are entering the characters correctly with all letters in uppercase and all dashes included. If so, I’d call Apple.
    By the way, before I upgraded, I renamed the version 2 Aperture program Aperture 2.1.4. This way when I installed my upgrade it created a new version 3 Aperture program, “Aperture”. I wonder if following this technique will get around your problem with the version 2 serial number.

  • IPod mini won't accept new song updates from iTunes

    I have today tried to update my iPod with a few songs, yet for some reason I have been unable to do so. I have recently downloaded the lastest update for the iPod and have got iTunes 6, so it is not an issue of out of date software.
    At first, the error message appearing was that there iTunes could not copy to the hard disk, but now that has changed since i rstored the factory settings to the iTunes message saying that there is no space even though the restoring it deleted all the songs off the iPod. It has shown a message to put on an iPod selection playlist but since it has copied this on, i have found a number of songs unable to fit onto the iPod now despite them being fit on previously.
    Anyone know how to solve this problem?
    P.S. Previously there was a message that loaded up in my system tray saying a particular iTunes file was corrup, yet this has stopped appearing- could this have anything to do with it?

    "It has shown a message to put on an iPod selection playlist but since it has copied this on, i have found a number of songs unable to fit onto the iPod now despite them being fit on previously"
    It sounds to me like your iTunes library is larger than the storage capacity of your iPod because this is the message you see when that happens. iTunes then asks if you want it to create a playlist of songs from your library and transfer this to your iPod. It appears you said 'yes' to this.
    If this is indeed what has happened, then your iPod is now full, and that's why it cannot be updated with more songs.
    How large is your iTunes library and what size iPod do you have, the 4GB or the 6GB?

  • How do I get signal from Digital Optical input (Extigy) to the Creative PlayCent

    How can I rip MP3's from the Digital Optical input on the Extigy? The PlayCenter does not seem to have any interest in the Extigy/USB as an input source. Thank you for your help!!?

    Since you are talking about variables, I suppose that you are using CP4, right?
    There is a fine tutorial in de CP4-help, chapter 'Variables and advanced actions', 'Tutorial on scripting' which explains more elaborately what I will try here:
    Create a user variable, p.e. named 'vName'  (Project, Actions, sheet Variables)
    Ask the user to enter his name in a Text Entry Box; in the properties of this TEB, sheet Advanced you indicate that this name should be put in your variable 'vName'
    Wherever you want to show this name, create a Text Caption and insert your variable by the button 'Insert variable'; this button is present in the properties window and also in the formatting toolbar if you are editing in place (look for X and and arrow); the variable in the text caption will show as '$$vName$$' and in the published SWF you will see the username.
    Hope this could help you, but please check the tutorial.
    Lilybiri

  • Convert TV signal from digital to analogue.

    As our TV signal has now changed to digital how can I convert to an analogue signal? If I attach a free view box with an aerial output into my Touchsmart IQ722 will it work?

    Those are some good questions!  And I don't know the answers, but maybe this will help:
    http://www.ramelectronics.net/audio-video/audio-co​nverters-extenders/analog-to-digital-digital-to-an​...
    You might find some information that will help you,
    Good luck,
    GeorgeFN
    GeorgeFN
    I work on behalf of HP.

  • SB Audigy- Recording from Digital Piano or Phonogr

    Have an electric piano with RCA (L/R) Output. Tried recording with the Audigy Card Front Aux 2 RCA Inputs. I have recording device set to Aux 2. Also tried What You Hear and every other selection available.
    Does the recording source have to be "amplified" to record using the front RCA's. I have to turn playback volume way up to hear anything. Very high hiss noise at this level.
    The Audigy records an electric guitar (through the lin 2 jack) very well and it is not amplified. ( ALL Input devices in the mixer are at full volume (not muted)
    Any suggestions please

    KokChoy-CL,
    Maybe you could also help with this (please):? the Mic input doesn't work on a new SB Audigy SE. I've been reading a lot of posts regarding this problem, but no solutions anywhere.
    The Audigy SE uses a "FlexJack" for:? Line In/Mic In/Digital I/O (DIGITAL_IO); all via the same?blue jack. I haven't tried Line In or Digital I/O, but the Mic input is not working.
    I know the?Mic is good (the?Mic?works with both onboard audio?and?a SoundBlaster Li've! card on the same machine).
    I read elsewhere (for the X-Fi card) that there is a setting for controlling which input?to use on the FlexJack--this setting is nowhere to be found in the Audigy software.

  • My Apple TV 2 won't accept home movies from iTunes

    My Apple TV 2 won't accept certain home movies from iTunes but my Apple TV 3rd generation will. Some of my older home movies play on both units. Whats different about my new movies?

    Winston,
    I've been having connection problems with my ATV2 for quite some time. Internet connections are fine, regardless of whether wired or via Ethernet, but it simply won't connect to my iTunes library (spinning wheel for ever). What "irks" me here is your comment below:
    I'm a little concerned by the Apple TV not being seen in iTunes when you try to restore by micro USB, this is pretty much a last resort repair.
    Is the ATV2 supposed to show up in iTunes and if so, how/where? It sure doesn't show up in my iTunes! I seem to be able to connect, as when I try to close iTunes after one of my many attempts to stream a movie I close iTunes it complaines that there's one or more ATVs connected.
    @Peter: please do respond here as to whether a replacement ATV2 has solved your problems ... don't really want to shell out more money for it, but if it solves the problems...

Maybe you are looking for