GB won't Export to Mp3

I go to Share>Export Song To Disk
It will mix down, then normalize, then it quits and does not convert, and as a result, does not save
Howver it does so for the AAC encoding no problem
Didn't see anything on this at hangtimes FAQ
I had to convert to AAC, then convert to mp3 in Itunes
I would prefer to do this directly from GB, though, as it has worked up till now

It will mix down, then normalize, then it quits and does not convert, and as a result, does not save
try turning off the auto-normalize option
I had to convert to AAC, then convert to mp3 in Itunes
that is the worst way to do it. if you are forced to, export it uncompressed and convert THAT instead.

Similar Messages

  • Won't export!

    My movies on Imovie HD won't export fully. They export the first 20ish seconds then the frame freezes but the audio keeps going :S
    what's going on and how to I fix it?
    thanks

    Hi
    Two first thoughts:
    • The free space on Your internal hard disk - less than 10Gb - try make it 25Gb or more
    • What material did You feed iMovie ?
    • streamingDV from a miniDV tape Camera. Thats what it's intended to be feed.
    . avi, .wmv, .mp4 etc. Gives all kinds of problems and needs to be converted to
    streamingDV to behave OK
    • Audio is the same:
    • from miniDV Camera or .aiff (eg CD disc)
    .mp3, direktly from iTunes etc. Problematic and most often needs to be converted to .aiff
    Yours Bengt W

  • Podcast won't export from Garageband to iWeb

    Hi all
    Help appreciated with this. I do a two hour music podcast (www.whatyouwantradio.com also available at http://soundcloud.com/whatyouwant-radio) which is created in Garageband and then exported to iWeb for uploading to my website. I've been running this, with few problems, since April 2009.
    Recently the garageband podcast won't export to iWeb. It's random, and I seem to have been able to bypass it by changing the filename slightly, or adjusting the quality at which it is exported (I like to export at 320mps for best quality - big files but no complaints from the 100 or so listeners. Could be more - who knows as I can't get stats from iTunes. But I digress). However, the most recent podcast, which is already available on Soundcloud, just won't export. It goes through the motions (mixdown etc.) but nothing appears on iWeb on the other side. No error message, nothing. I know that memory has also been an issue in the past but right now there is plenty to spare (5.37GB at last glance).
    I'd really be grateful for some help on this, I'm at a bit of a loss - no error message, no clue. As I say, this podcast has been going for nearly three years and it's only recently I've had this problem.
    Cheers,
    Stuart
    Mac OS X 10.6.8
    Garageband '09 5.1
    Model Name:
    MacBook
      Model Identifier:
    MacBook5,1
      Processor Name:
    Intel Core 2 Duo
      Processor Speed:
    2.4 GHz
      Number Of Processors:
    1
      Total Number Of Cores:
    2
      L2 Cache:
    3 MB
      Memory:
    4 GB
      Bus Speed:
    1.07 GHz
      Boot ROM Version:
    MB51.007D.B03
      SMC Version (system):
    1.40f2
      Serial Number (system):
    W8912A098QT
      Hardware UUID:
    CE258311-95FB-5BB2-BF43-DC494598B584
      Sudden Motion Sensor:
      State:
    Enabled

    Just a further note on this. I tried a couple more times yesterday to export the file. Starting out with over 5GB of memory, by the time I had tried twice this had gone down by a couple of GB. Still no export. This morning I noticed some new files in the trash that were from around the time of the failed exporting:
    Note sure if you can see that, but I'm guessing the files are something to do with the failed export? Does anyone have any thoughts? Either way, this problem is still annoying the **** out of me...
    Stuart

  • OMF won't export out of final cut pro.

    Exporting a 93min 1920x1080 HD timeline to OMF
    5 second handles tried 2 second handles as well.
    OMF won't export out of final cut pro. Get error message there is a 2 gb limit.
    Final cut 6.0.6
    Have deadline. Didn't see it on any forum. Help!! Thanks!!

    Seems like a weird thing to not be able to do since it's called final cut PRO...
    Bagging on Final Cut Pro for OMF? HA! OMF has been around LONG BEFORE FCP was introduced. It isn't an FCP issue...OMF technology is VERY old. Over 20 years I believe. I used it on Avid...and it always had a 20GB limit.
    You cannot deliver 1 track via OMF. You can ask the audio person. I know that Avid now allows you to export an AAF...but FCP doesn't do AAF. For embedded audio I think that OMF is the only way. SO you have to work within the limitations of that format.
    Shane

  • InDesign CS5 won't export to PDF

    I've been having a problem recently when exporting to PDF in InDesign CS5.  I get an error message which says:
    1 problem was found with a background task:
    Export: "NameOfDocument" (1)
    It won't export to PDF.  What can I do about this?  Many thanks.

    Oh, sorry.  Forgot about the specifics.
    Local drive on Win7.  Yes, file naming conventions adhered to.

  • Disgrace: no error msg when GB fails to export to mp3

    Gb does not create the mp3 file when exporting to mp3 and does not give any warning or error msg.
    Trying to find why this is so, I see several posts in several forums, I believe the oldest I saw dates back 2007.
    I think it's a disgrace! This problem exists for so long. It costs so many people so much time. It is such a clear sign of poor listening to customers and poor testing.
    I used to be a Mac/Apple fan, dating back to mid-1980's as Apple user.
    But this is so infuriating! It's plainly disrespectful.
    Yes, now I know, I read the thread. "I think it is 27 characters max file name but not sure"
    Why do we not get an error msg when the file can not be saved?
    Give me any valid reason to create so much trouble for so many customers! (non-technical reason I mean, I know the techy problems that may make this more
    difficult than it looks on the surface...)
    This is especialy wrong since it is by no means anything esotheric. Right the first project you do, without doing anything fancy or weird. Just type normal descriptive name and it fails. Without warning or error.
    AAAARRRGGGG!
    Shame on you Garageband team!

    I just came in here to report the very same thing, except in my case it may be due to the very large number of (approx 1000) frames in the movie I've created.
    I successfully did smaller versions of the same thing (a series of same size/format logos) but it just goes through the motions (saying it is creating a 9.8mb movie) and saves nothing.
    Is there some unstated upper limit on the number of frames when making a slideshow?
    I've said it before but Quicktime is the one of the most poorly written and documented Apple apps I've encountered. The amount of time I have wasted on doing even the simplest things...

  • New Quicktime 7.6.6 (1671) won't export WAV files

    HELP! - New Quicktime 7.6.6 (1671) won't export WAV files. I just did the automatic upgrade to the new version of Quicktime and now I can't export WAV files from a CAF file. The original .CAF file plays perfectly but when I attempt to export it the exported file is corrupted and won't play. I have another computer with the previous version of Quicktime and it exports the same file flawlessly. Anyone know what's going on with the new version? THANKS!

    +Error writing to the file: C:\Program Files\iTunes\iTunesMiniPlayer.Resources\nb.lproj\iTunesMiniPlayerLocalized.dll. Verify that you have access to that directory.+
    More often than not, that sort of message indicates file damage rather than a privileges issue on the file.
    If you've got Windows XP, try doing a chkdsk over your C drive, as per:
    How to perform disk error checking in Windows XP
    If you've got Vista, try the following procedure. Go "Start > Computer". Right-click on "Local Disk C:" and select "properties". Click the "Tools" tab. Click the "Check now" button in the "Error correction" section.
    Do the disk checks find/repair any damage? If so, does an install go through properly afterwards?

  • FCP won't export M2V

    I am running FCP Studio and trying to export an m2v. I recently upgraded my G5 and basically put my old hard drives right into the new G5 box. Since I did that, FCP asked for a serial number again, and I entered it. OK. Now I am trying to export the Mpeg2 and it says it can't export until DVD studio Pro is serialized - but then I run DVD studio pro and it IS serialized and registered. Restart did not fix it. FCP just can't seem to tell that DVD studio pro is already serialized and won't export. Should I trash my preferences? FCP or DVD studio pro or both? Any suggestions?

    FYI....
    Trying to uninstall DVD Pro and then re-installing it will not work! I ran through this problem when I upgraded to FCP Studio. The issue lies between DVD Pro and QT7, it is a bug that apple is currently trying to resolve.
    I spent numerous hours on the phone with apple to get this issue resolved. The best work around at the moment is going through Compressor and making a M2V. Compressor will retain your chapter markers from FCP no worries.
    The only issue is time, it takes longer using compressor but the quality is 100x better because you have more control of the VBP.
    Good Luck

  • Cropped song settings won't export to slideshow

    For some reason, my start/stop time settings for individual songs in itunes won't export to an iphoto slideshow. Is there another way to do this?

    David,
    Your right. Changes made to the stop and start time of songs in iTunes don't seem to have any effect in iPhoto.
    I suppose one work around would be to first burn the music for your slide show to a music CD and then reimport the tracks.
    You could also use iMovie, GarageBand or a third party app like Sound Studio to actually edit the tracks (probably best to edit copies of the tracks) and then reimport the edited tracks back into iTunes.
    Kind of a hassle. I'll continue to think a bout a more elegant solution.
    Matt

  • One font won't export

    Hi, all. Sorry if this is basic--I'm just a simple artist-designer, and am less skilled at software management and presets.
    I just reinstalled my ID CS4 on a new-to-me machine running OSx Mountain Lion. For an unknown reason, the software now won't export the Helvetica Neue Regular font (all other fonts in the typeface are FINE.) 'Regular' exports as lines of boxes. HNeue has been my go-to for many years, and I'd rather not reformat all of my old stuff. Thoughts?
    HNeue Regular shows up in fontbook, and I already tried 'restore system fonts.' Also set "Subset all Fonts" to 0%. I have no idea what this means, but the internet told me to do it.
    Thanks for your ideas. This is really messing me up.
    Emily

    Saw this post and thought it can be easily fixed but I haven't worked on a Mac for about 10 years. I'm sure there's someone that can help.
    The only thing I would suggest trying is disabling it in your Font Management and copying the font to your system Fonts folder.

  • Sequence won't export in quicktime movie

    I have Final Cut Express and for some reason a sequence won't export into a Quicktime movie, but a Final Cut Express movie file.
    Any ideas why this is happening?
    Thanks
    Barry

    Thank you both for the input.
    I didn't realize this. This was the first time the file I exported didn't have the Quicktime icon, or named a Quicktime File.
    Does this type of file still work on Internet sites like Facebook?
    Much appreciated.
    Barry

  • IPhoto '08 won't export pics

    iPhoto '08 won't export any files. I've tried jpegs and tiffs and iPhoto 08 just hangs during export - I've had to "force quit" it - any ideas? I've tried exporting just one pic and let it run for close to 5 minutes before giving up.

    ggrosh
    Try rebuilding the database. Hold down the apple and option (or alt) keys and launch iPhoto. Use the resulting dialogue to rebuild.
    If that doesn't work try trash the com.apple.iphoto.plist file from the home / library / preferences folder.
    Regards
    TD

  • InD suddenly won't export to pdf

    I've been exporting files to pdf all day to send to my printer, and suddenly InDesign won't export anymore. Pop ups open as usual, but nothing happens.Grrrrrrr!!

    Are you patched to 7.0.4?
    Is the export hanging in the background, or is a file  supposedly created, but non-exisitent? Have you opened the Background Tasks panel to see if the task is completing?
    Can you export in the foreground by putting the file in a Book?

  • QT won't export to WMV

    I made a movie out of a powerpoint presentation, and it exported into .mov file just fine. But it won't export as a .wmv file. I've tried every one of the settings, but it only captures the first 25 seconds or so.
    PPC G4 Mac OS X (10.3.9) 1GHZ, 640 RAM

    Export from QuickTime Pro to WMP formats is not a part of the standard QT Pro install.
    It is enabled by the http://flip4mac.com component. To export more than 30 seconds you must purchase the upgrade for their product.

  • Pages won't export to Word

    Running latest Pages in latest Lion on a new iMac. When I try to export to Word, I get an error message: "The file format is invalid."
    A Word doc IS actually created, but it has all Comments stripped out...making it utterly useless to me. I've tried uninstalling iWork 09, restarting the iMac, then reinstalling (and re-upgrading) iWork 09 from the original disc, but no love -- it just won't export a Word file with Comments.
    Anyone else having this problem? Anyone have a solution?
    Thanks!
    Barry

    Well, I tried export to Word before saving the document in Pages. It worked fine! I didn't finalize the changes in any way. I could open the .doc document and it still showed the changes and comment field.
    I think something is corrupt in your document. You could select the content and paste into a new blank template and save it and then export to a Word document. Then undo all changes in the original document to the point you started the changes and copy and paste  into a new document and give it a different name. Now you have a before and after the changes and hopefully the  corruption didn't get copied over.

Maybe you are looking for

  • E-mail messages with text in the form of an attached file?

    Some of the e-mails I send are being received without any text but with my original message in the form of an attachment together with any other attachments I have sent. This results in some people not opening my mails or at least not understanding w

  • Can't drag desktop icons & other problems

    Hi.. I cannot drag my desktop icons nor items from a folder to DT. When this happened, I lost printing from my Lexmark E120N, my memory chips were listed as 68k and 28 k when they are 1 gig & 2 gig. That seems to have cleared up. I also cannot copy a

  • My macbookpro Does not start after Update to maverick

    Dear all, I tried to update my macbook pro to MAverick MAC OS, at the beginning the update process went flawless but after the laptor reboot the display went black!!! No matter what I do, it does not show anything in the display. Indeed I tried to pl

  • OWB Release 2 Download link not working

    When i try to download the new OWB Release 2 (10.2.0.1) for the windows platform i get 404-Error. http://www.oracle.com/technology/software/htdocs/devlic.html?http://download.oracle.com/otn/nt/warehouse/10201/OWB_10.2.0.1.win.zip Can you please fix t

  • E-Recruiting - Attachment Types and Object Relationships

    Can someone help me to understand why SAP recommends attachment types to be linked to the Application object and not to the Candidacy object?  I've always created attachment types specific to certain candidacy activities to that object as appropriate