GB won't output to Ch 9 & 10 (digital optical) on Edirol FA-101

Hi,
I have my MacBook set up to output to the FA-101 through channels 9 & 10. Everything work fine apart from Garageband.
I also have Logic Express and you can select the output on the individual channels and also the master channel. I can't seem to find a similar thing in GB.
My GB audio peferences are set up for FA-101 input and System Settings output (as the system setting outputs through FA-101 Ch 9 & 10).
Can you change the output channel of either the master or tracks?

I'm having an issue where the Edirol FA-101 will lock up my external FW drives. It was working then one day recently (possably after an update...??) it started locking my drives - rendering it un-useable. After reading some issues people are experiencing I believe it is quite possable the Mavericks TB/FW driver. I hope they correct it soon.

Similar Messages

Mid-2011 Mac Mini won't output 2560 x 1600 to my Dell U3014

Hi,
I recently purchased a Dell U3014 30" monitor. I've been using it with my PC via Dual-Link DVI without a hitch.
I decided to plug my mid-2011 Mac Mini into it using a MiniDisplayPort-to-DisplayPort cable. My mac recognises the monitor, but won't output at 2560 x 1600, the monitor says it isn't receiving a signal.
If I change the display settings to 1080p the monitor comes to life.
Any help would be appreciated.
Thanks.

The specs are:
Video Card:
Radeon HD 6630M
VRAM Type:
GDDR5
Details:
This model has an AMD Radeon HD 6630M graphics processor with 256 MB of dedicated GDDR5 memory. Also see: What type of video system is provided by the Aluminum Mac mini models? Which are integrated and which are dedicated? Can the video be upgraded?
Standard VRAM:
256 MB
Maximum VRAM:
256 MB
Display Support:
Three Displays
Resolution Support:
1920x1200*
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600 (x2)*
Details:
*This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and2560x1600 on two Thunderbolt or Mini DisplayPort displays or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
http://www.everymac.com/systems/apple/mac_mini/specs/mac-mini-core-i5-2.5-mid-20 11-specs.html

My macmini won't output to any display since reinstalling and upgrading to maverick

I recently wiped my macmini and when I reinstalled it, it upgraded to maverick.
Now it won't output to any display. When I first installed it, I managed to get it to work once after turning it on and off several times.
I've tried connecting to both a tv and a monitor, using both display port and hdmi connections.
ive done all these:
Reset the computer's parameter RAM.
Reset the computer's PMU.
If you have an Intel-based Mac mini, reset the SMC.
Still nothing...
does anyone have any suggestions?

Does anything show when booting up?
When starting in Safe Mode?
OS X: What is Safe Boot, Safe Mode?
When booting to Recovery?
OS X: About OS X Recovery
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

["SOLVED"] PulseAudio - some applications won't output sound sometimes

So, I have KDE 4 and PulseAudio installed, with VLC as Phonon's backend software.
After startup, I often find that Skype won't output sound at all for seemingly random periods of time. This also often happens (sometimes simultaneously, but not necessarily) to Chromium. Pavucontrol and the KDE audio mixer, don't show anything useful at all in terms of the output of Skype and Chromium, and messing with master output in Pavucontrol doesn't affect anything.
After a completely random period of time (usually a very long period of time), these applications start outputting sound again. It's very frustrating, and restarting the applications doesn't help whatsoever. While these two applications are affected, all other applications output sound perfectly.
I don't even know. I've searched, but I haven't found any similar problems documented elsewhere. Any advice?
EDIT: Solved, for now.
Last edited by Archimaredes (2013-03-14 20:22:04)

I fixed it (for now, at least!)
I ran the below command:
$ cat /proc/asound/cards
0 [U0x46d0x804 ]: USB-Audio - USB Device 0x46d:0x804
USB Device 0x46d:0x804 at usb-0000:00:1a.0-1.2, high speed
1 [MID ]: HDA-Intel - HDA Intel MID
HDA Intel MID at 0xf9ff8000 irq 47
2 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xfbd7c000 irq 17
Basically, my USB webcam, which also acts as a microphone, was being treated as my default sound card. I changed this by creating a file in /etc/modprobe.d with the following:
options snd-hda-intel index=0
Which set my real sound card as default:
$ cat /proc/asound/cards
0 [MID ]: HDA-Intel - HDA Intel MID
HDA Intel MID at 0xf9ff8000 irq 47
1 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xfbd7c000 irq 17
2 [U0x46d0x804 ]: USB-Audio - USB Device 0x46d:0x804
USB Device 0x46d:0x804 at usb-0000:00:1a.0-1.2, high speed
The problem isn't ENTIRELY fixed. Skype's still being a bit buggy, but at least Chromium is now playing sound, including in Flash media. Strangely enough, after playing a Flash video (e.g. on YouTube), Skype's sound seems to fix itself if it's defunct.
Last edited by Archimaredes (2013-03-14 20:23:49)

Macintosh IIsi won't output video

I recently got my hands on a Macintosh IIsi that refuses to boot, I get the startup tone, the hard drive spins, and the indecator lights light up but it won't output video. I have tried multiple monitors and different display adapters without success. I want to know what the next step to fixing it

zmclearan,
Are you using a PC monitor and adapters or do you have access to an original Mac monitor? When you say that it refuses to boot, is it just that you can not see the startup screen? How long does the hard drive noise last?
The next step is the process of elimination. Check the PRAM battery first. A dead battery will affect the video circuit in many machines. Look online for batteries with free shipping. If you go to Radio Shack, they will have replacement batteries that cost more than the computer.
A way to avoid buying a battery is to do what is called a "warm boot." You start the computer, listen for the chime, give it ten seconds, then hold down the command key + control key + the soft power key (the key at the top right hand of the keyboard or top center on some smaller keyboards). If you hear the chime again then it restarted. This gives the computer a fresh start with power supplied by the wall power and not the battery power. For newer computers, you turn the computer on at the power button, turn it off and back on immediately. That will wake up the video circuit on a Quadra 605 or a 6100 PPC. I do not remember ever needing to do that on an 030 processor computer so the on-off-on trick may only be for the power supplies in the 605 form factor.
If you can find a PDS to NUBUS adapter you could test to see if the onboard video is bad by using a NUBUS video card. The IIsi uses built in RAM so it will not be a video RAM problem. How much RAM do you have? The chime means that you have some form of RAM. Incommpatible RAM or no RAM will result in a sad musical sound.
Your best alternative for testing older computers is to find a Mac user group in your area. Someone will have spare parts, monitors and other resources. Your video adapter may not be properly configured and the easiest way to test that is on another machine that you know works with your monitor. Unfortunately, buying the battery is just a gamble. It that does not fix it, you have just spent good money on a bad motherboard problem. Post back with the name of a city near you and maybe we can find a user group to help out with parts.
Jim~
http://lowendmac.com/ii/macintosh-iisi.html

How to connect Digital Optical Audio output iMac with Receiver Input

I have connected iMac with onkyo hts-3300 home theater system receiver through optical audio TosLink Cable.( http://www.amazon.com/Digital-Optical-Audio-TosLink-Cable/dp/B001ZU3G2I/ref=sr12?ie=UTF8&qid=1292865309&sr=8-2 ). Unfortunately there is no sound coming out from the Home theater system. I have verified the Receiver optical input is working fine by connecting with my TV optical audio digital out put and the it's working great. The only difference between TV and iMac is, on my TV, it has optical audio digital output and I can use this cable (http://www.amazon.com/Tripp-Lite-A102-02M-Digital-connectors/dp/B0002WPREU/ref=s r11?s=electronics&ie=UTF8&qid=1297320792&sr=1-1) to make it work. I can also verified my optical audio TosLink Cable working because I can see the red light coming out from the cable. So the only problem could be from iMac. I doubt I need to change the additional setting to configure iMac to use external optical audio setting instead of the buit in audio setting. Hoe can I able to do it? or my iMac(IMAC 21.5"/3.06/2X2GB/500GB/9400M-ITP
MB950ZP/A) doesn't support optical digital audio out put? I have follow this thread http://discussions.apple.com/thread.jspa?messageID=12769423&#12769423 and to my surprise which doesn't work out for me. I doubt that i need to change some setting, but when I got to setting>> sound I cannot change any setting. I was quite depressed aldy. Can someone answer my question as i m a newbie here. Thanks a lot

Thank you very much for your reply.
@Király : May i know how to Open Audio Midi Setup? Is this Audio Midi Setup is in the locatated in the Setting in Mac Snow Leapord OS? or how to locate this "Audio Midi Setup " in Mac enviroment. Is it possible to open this Audio Midi Setup in windows 7 enviroment also? I Just want to get the audio from my iMac in Hts-3300 onkyo home theatre. YOur help is much appreciated
@rkaufmann87 : Thank you very much for your sharing about this http://www.apple.com/airportexpress/ connection. for me what i understand is the digital audio output in airportexpress is the same as the audio out put in iMac in terms of details sepcs. So this airportexpress will only help you connect wirelessly to home theatre system, rather than waired connection. Other than that nothig much difference. So there is no point for me to spend extra bucks to attain the wireless connection. Unless the airportexpress have optical digital input, which i believe not. Correct me if I m worng, thanks

How to store the output of a analog to digital converter into an 2D array

Hi
I am doing my M.Tech Thesis in Image reconstruction and I am using labview for simulation and I want to know how to store the output of a analog to digital converter into an 2D labview array.

nitinkajay wrote:
I want to know how to store the output of a analog to digital converter into an 2D labview array.
How exactly are you performing 'Analog to Digital'???
Grabbing image using camera OR performing data acquisition using DAQ card OR some other way????
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.

I cannot hear any songs or movies from my laptop speakers - the headphone port works and a red light is showing? The output sound settings are showing as digital optical only? Any ideas :)

I cannot hear any songs or movies from my laptop speakers - the headphone port works and a red light is showing from the port? The output sound settings are showing as digital optical only? I used the headphones in the laptop for the first time yesterday and have had this problem ever since. Any ideas

The internal switch in the audio output port is stuck. Try inserting the earphone plug a few times. If no success, try jiggling a tooth pick inside in order to trip the switch.. If still no success, have the technicians at the Apple store genius bar do it for you.
Ciao.

Can I connect the digital output of flat screen to digital stereo output?

can I connect the digital output of flat screen to digital stereo output?

Hello JRefugio,
Welcome to the Sony Community.
Are you referring to a Sony flat screen TV? What is the model number of the device to which you wish to connect the digital output from the flat screen? It is required to know the exact model number of the Sony product so that the appropriate information can be provided.
Thank you for your post.

Anyone knows if the mini-jack in ipad 2 dock is also digital (optical) output? ... like in the latest AirPort Express.

I would like to know if the mini headphone jack in the ipad 2 dock can output either analogue or digital (optical) much like in the AirPort Express does.
thx

http://www.apple.com/ipad/specs/
Standard audio jack.

IMac digital optical output cable

Has anyone used the iMac headphone output in its capacity as a optical digital output? Can you even buy a 3.5mm - toslink cable? If I buy one it would need ot be 7m long...
Thanks
Andy

Andy,
I've used these successful in the past, however never directly from my iMac to a receiver. I'v normally gone from my Airport Express to my receiver to play air tunes music from iTunes.
http://www.amazon.com/Quality-Digital-Fiber-Toslink-Optical/dp/B003V7DSH6/ref=sr _1_7?ie=UTF8&qid=1369175582&sr=8-7&keywords=3.5+to+toslink+cable
which looks like it may be long enough for you.

Bridge CS4 won't output to pdf multiple images with same filename

Hiya...my googling efforts have thus far failed!
I've got CS4, and in Bridge, I created a New Smart Collection to find all filenames in a folder containing "." or ".jpg" - which in turn searched through all the subfolders like what you used to be able to do in Photoshop CS3. Very simple stuff, but all the images are jpg's, but in multiple folders (I don't want to move them out of the folders, as the files came from an external source, and there are heaps of folders, and I don't want to pdf each subfolder seperately as it will take forever).
The problem is that some of the files have the same filenames (again I'd prefer not to rename, as it happens a lot on this project, and they are all over the place). So whilst Bridge will show the thumbnail images correctly in the content tabbed screen in my New Smart Collection, but once I've done the Output to PDF thing, for example, instead of showing both different images it has pdf only the first image but repeated it twice. And this happens multiple times throughout the pdf, the more times the same filename is used, the more times the first image gets repeated.
I know that it is messy to have multiple similar filenames, but why can't bridge just place the image anyway? It allocated a space for it on the pdf and does show it in bridge, it just doesn't seem to survive the transfer to pdf well.
The only other thing that I have done is use the below link (which was posted on another adobe forum thread) to create a custom pdf output template (nothing too fancy, just number of rows / columns, size, font etc). But I've tried using the standard bridge templates and it does the same thing.
http://www.proficiografik.com/2009/08/03/save-custom-pdf-output-template-in-adobe-bridge-c s4.html
Any help would be appreciated...even if to tell me that I am being unreasonable!
UPDATE 16/11/09
Just to let you know that I seem to have resolved the bug inadvertently with one of the Adobe updates. The below is the link for the AdobeOutputModule-2.1-mul-AdobeUpdate.zip which was released on 2/19/2009 - which allows for headers & footers to be placed in the Ouput pdf. I finally installed it today, and everything seems to be working fine now (i.e. I can pdf multiple images with the same filenames and the pdf will actually show each different image rather than repeating only 1 of the images).
Must have been a fix installed in the contact sheet templates that get installed with the update - not sure why the original version was corrupted, but I've left that with the Adobe guys (I submitted a bug report - and they were able to replicate the problem but hadn't fixed it as yet).
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4228
Message was edited by: djtun71 (16/11/09)

When I click import from disc I am asked to choose a disc and then I get this message:
The following photos will not be imported because they are already present in the catalog. To see these photos in the catalog select 'Show in Library' (the import will be canceled).
This is followed by a long list of images. If I click 'Show in Library' I can see all the images with the same filename. And then they start to automatically write over those images with images from the disc. However they keep the same metadata and keywords from the previous images. If I click on Import and deselect the "don't reimport suspected duplicates" box, it imports only the images that don't share filenames and none of the images that do.
Is there a way of setting the "Don't reimport suspected duplicates" box in preferences?

Viewer won't output to NTSC monitor in FCP5.1

Hello!
I was used to being able to view my clips in the viewer on my ntsc monitor in HD, since upgrading to FCPStudio5.1.1, I can't seem to find an option for this, the manual mentions none, and a search provided no answer related to the viewer. I am able to watch the timeline just fine on my ntsc monitor.
Is this a new change with FCP5?
Thanks!
Ymir

I am connected to a Sony mediaconverter via firewire.
It connects to my tv monitor. External video is set to all frames. After refreshing a/v devices, the viewer will now output to the screen when using "gang" setting. If I use sync off, I get current frame its stopped on. Open gives nothing. Is there a way to make gang the default so I don't have to set it for each clip?
Thanks
Ymir

RH7 project upgraded to RH8 won't output .epub

I want to make a project available as an epub edition. I've upgraded to RH8 and imported the epub generator script and the zip programme. When I open my project (which was created in RH7) I upgrade it so it will work in RH8. I run the script and generate an epub file but on that is only 560kb big, which seems small for my project. If I try to open it it crashes Adobe Digital Editions.
I can create a new test project of a few pages and get this to work, so it is clearly not the installation but the project that is the problem.
My question is, how do I find out what is causing the conversion to fail? My project is quite complex with lots of images, footnotes, internal links and pop-ups so I don't really want to have to recreate the whole thing in RH8.
Thanks in advance for any advice.

That's what we do best, here...send people away to rethink!
As you rethink the project, you might reconsider tailoring the content for epub so that it could actually be quite useful for those users viewing on a smaller screen.
Actually, this rethinking could be a beneficial two-way street: the epub formatting might prompt you to reformat across the board, thereby producing a leaner primary output. Think about it. As I like to say about extensive DHTML & JavaScript elements: just because you can, doesn't mean you should.
Good luck,
Leon

IPhone 4 Won't Output Audio, No Airplay

My iPhone4 (OS 7.1.2) works fine, but has essentially become a brick to external devices. Music will not play through headphones, the phone no longer outputs audio to my car stereo via USB or Bluetooth, and the AirPlay icon has disappeared from the video player (yes, my Apple TV is on the same wi-fi connection). In my car, the USB screen says "Unreadable" and the Bluetooth screen doesn't even acknowledge my phone (which is discoverable).
All of this started happening under curious circumstances. Up until a few weeks ago, my phone's loudspeaker hadn't been working for a while. The ringtone worked, but no other audio worked. It was like the phone thought I had headphones plugged in. All of a sudden, the loudspeaker started working--I have no idea why--and at that time, I started experiencing the problem I'm describing here.
They sure seem related. Any tips from the community?

Okay - other things I would try is different USB cables and restoring on another computer if possible.
If no joy with either of those, make an appointment at an Apple store near you and bring it in to be evaluated. It may have a hardware problem and will need to be replaced.
~Lyssa

GB won't output to Ch 9 & 10 (digital optical) on Edirol FA-101

Similar Messages

Maybe you are looking for